ilo: make ilo_render opaque

It is not used outside the render code.  There are also too many details in it
that we do not want other components to access directly.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: make ilo_render_emit_draw() direct

Remove emit_draw() and ILO_RENDER_DRAW indirections.  With all emit functions
being direct now, ilo_render_estimate_size() and more can also be removed.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: make ilo_render_emit_rectlist() direct

Remove emit_rectlist() and ILO_RENDER_RECTLIST indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: clean up draw and rectlist state emission

Add these new high-level functions

  ilo_render_get_draw_dynamic_states_len()
  ilo_render_emit_draw_dynamic_states()
  ilo_render_get_rectlist_dynamic_states_len()
  ilo_render_emit_rectlist_dynamic_states()
  ilo_render_get_draw_surface_states_len()
  ilo_render_emit_draw_surface_states()

for draw and rectlist state emission.  They are implemented in the new
ilo_render_dynamic.c and ilo_render_surface.c.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: sanity check ilo_render_get_*_len()

Assert that we never write more than what ilo_render_get_*_len() returns.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: simplify ilo_render_get_query_len()

For all supported query types, we always emit a PIPE_CONTROL.  Call
ilo_render_get_flush_len() for simplicity and clarity.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: make ilo_render_emit_query() direct

Remove emit_query() and ILO_RENDER_QUERY indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: make ilo_render_emit_flush() direct

Remove emit_flush() and ILO_RENDER_FLUSH indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: simplify ilo_render invalidation

ilo_render is based on ilo_builder.  We should only care if the builder
buffers are invalidated, or if the hardware context is invalidated.  Replace
ilo_render_invalidate() with flags by ilo_render_invalidate_builder() and
ilo_render_invalidate_hw().

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: add ilo_builder_{dynamic,surface}_used()

Return how many DWords are used in dynamic and surface buffers respectively.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: rename state buffer to dynamic buffer

Both dynamic buffer and surface buffer are state buffers.  We should not use
state buffer to refer to the former.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: constify ilo_render in ilo_render_get_sample_position()

It is a getter and is not supposed to modify ilo_render.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: rename 3d_pipeline to render

Follow the file renaming.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: remove struct ilo_3d

Move members of ilo_3d that still make sense to ilo_context.  With ilo_3d
gone, rename functions whose names begin with ilo_3d to something more
appropriate.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: rename ilo_3d_pipeline*.[ch] to ilo_render*.[ch]

They are used to build render engine commands, which can be more than 3D.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

ilo: rename ilo_3d.[ch] to ilo_draw.[ch]

There is not much left in struct ilo_3d.  We want to kill it and ilo_3d.[ch]
will be bad names.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>

st/mesa: Use PIPE_USAGE_STAGING for GL_STATIC/DYNAMIC/STREAM_READ buffers

Such buffers can only be useful by reading from them with the CPU, so we
need to make sure CPU reads are fast.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84178
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org

glsl: remove unused link_assign_uniform_block_offsets

ubo offsets are assigned by link_uniform_blocks since 514f8c7e

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Structures must have same name to be considered same type.

According to GLSL(4.2) and GLSL-ES (1.0, 3.0) spec, Structures must
have the same name to be considered same type. We currently ignore
the name check while checking if two records are same. This patch
fixes this.

Patch fixes failing tests in WebGL conformance test
'shaders-with-uniform-structs' when running Chrome on OpenGL ES.

v2: Do not force name comparison with unnamed types (Tapani)
v3: Cleanups (Matt)

Signed-off-by: Kalyan Kondapally <kalyan.kondapally@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83934

glsl: fix uniform location count used for glsl types

Patch fixes the slot count used by vector types and adds 1 slot
to be used by image and sampler types.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82921

gm107/ir: take relative pfetch offset into account

There is no dedicated instruction for this, so just combine it with the
constant offset.

Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>

gallivm: More fallout from disabling with LLVM 3.6

The draw module would still try to use gallivm, causing many piglit tests
to fail with an assertion failure. llvmpipe might have been similarly
affected.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

gm107/ir: add support for indirect const buffer selection

This was missed in the commit that enabled it for fermi/kepler as part
of ARB_gpu_shader5

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>

gm107/ir: fix texture argument order

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>

gm107/ir: fix manual TXD for array targets

This parallels the fixes in commit afea9bae.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>

nouveau: fix glCompressedTexImage

mesa_texstore expects pixel data, not compressed data. For compressed
textures, we want to just copy the bits in without any conversion.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Francisco Jerez <currojerez@riseup.net>

nv50/ir: avoid deleting pseudo instructions too early

What happens is that a SPLIT operation is part of the spill node, and as
a pseudo op, the instruction gets erased after processing its first def.
However the later defs still need to refer to it, so instead delay
deleting until after that whole RA node is done processing.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79462
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>

mesa/st: NumLayers is only valid for array textures

For 3d textures, NumLayers is set to 1, which is not what we want. This
fixes the newly added gl-layer-render-storage test (which constructs
immutable 3d textures). Fixes regression introduced in d82bd7eb060.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84145
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Chris Forbes <chrisf@ijw.co.nz>

nv50/ir: add some comments on edge classification

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50,nvc0: fix 3d blit logic for odd depth/stencil formats

Reported-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50,nvc0: add missing depth/stencil formats to tile flag selection

Reported-by: David Heidelberger <david.heidelberger@ixit.cz>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

vc4: Switch from errx() to fprintf() and abort().

These are pretty catastrophic, "should never happen" failure paths (though
4 tests in piglit hit them currently, due to a single bug).  An abort()
that you can gdb on easily is probably more useful than a clean exit,
particularly since a bug in piglit framework right now is causing early
exit(1)s to simply not be recorded in the results at all.

vc4: Fix miplevel validation for raster textures.

We were using the un-minified value, meaning we'd reject correctly laid
out textures.

mesa: Replace IS_NEGATIVE(x) with x < 0.0f.

I only made IS_NEGATIVE(x) use signbit in commit 0f3ba405 in an attempt
to fix 54805, but it didn't help. We didn't use signbit on some
platforms and instead defined it to x < 0.0f.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeon: Use PRINTLIKE macro.

configure.ac: Replace gallium_check_st with gallium_require_drm.

configure.ac: Drop gallium directory tracking.

Was only tracked to be printed at the end of configure, but configure
quits if it can't build something we requested, rather than silently
dropping it, so printing these directories has little use.

configure.ac: Use autoconf macro for GNU make.

ralloc: Mark ralloc functions with gcc's malloc attribute.

Cuts a few hundred bytes from the DRI drivers, so it must give gcc some
extra information.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Replace a priori knowledge of gcc attributes with configure tests.

Note that I had to add support for testing the packed attribute to
m4/ax_gcc_func_attribute.m4.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [C bits]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Replace a priori knowledge of gcc builtins with configure tests.

Presumbly this will let clang and other compilers use the built-ins as
well.

Notice two changes specifically:
   - in _mesa_next_pow_two_64(), always use __builtin_clzll and add a
     static assertion that this is safe.
   - in macros.h, remove the clang-specific definition since it should
     be able to detect __builtin_unreachable in configure.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [C bits]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/compaction: Document instruction compaction capabilities.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Emit ELSE/ENDIF JIP with type D on Gen 7.

The spec says the type must be W (JIP is 16-bits after all), but we've
been emitting it with a UD type all along and have experienced no
adverse effects. Changing the type to D allows ELSE and ENDIF
instructions to be compacted.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Support compaction of control flow instructions.

We're currently emitting compactable control flow instruction the wrong
types, preventing their compaction. The next patch will fix this and
actually enable compaction.

On chips that cannot compact control flow instructions, attempts to find
a match in the datatype table will fail.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Add support for G45.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: Add BRW_OPCODE_NENOP for G45.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Add support for Gen5.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>

i965/compaction: Reduce size of compacted_counts[] array.

The array was previously indexed in units of brw_compact_inst (8-bytes),
but before compaction all instructions are uncompacted, so every odd
element was unused.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Use sizeof brw_inst/brw_compact_inst.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Increment offset in for loop.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/compaction: Make src_offset local to the for loop.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Remove unnecessary is-compacted? check.

Used to pass over previously compacted instructions in this loop, but no
longer. No point in checking.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/compaction: Don't set UIP on ELSE on Gen < 8.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/compaction: Rework 3-src compaction logic.

It may be possible to create a contrived example in which a 3-src
instruction would have been compacted on Gen < 8. I'd rather not
discover it in the wild.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/sf: Disable instruction compaction.

Currently a no-op, since instruction compaction isn't implemented for the
generations that have a programmable strips-and-fans unit.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Set JumpCount, not JIP, on ENDIF on Gen 6.

Despite what the Sandybridge PRM says, ENDIF has Jump Count in <dst>,
not JIP in <src1>. (The same mistake appears about WHILE as well).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Use VertexArray, not _VertexArray, in array size expressions.

Both sizes are VERT_ATTRIB_MAX, so this has no effect.  But it drops a
few trivial uses of the derived state.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Set correct array element in vbo_exec_vtx_init.

I'm not familiar with this code, but this sure appears to be a typo.
It looks like the intent is to set each array element, not arrays[0]
each time.  Notably, the loop just below uses "array", not "arrays".

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: mesa-stable@lists.freedesktop.org

mesa: Use proper structure for glGet*(GL_TEXTURE_COORD_ARRAY*).

The code in get.c that handles this uses ctx->Array.VAO->VertexAttrib,
which is a gl_vertex_attrib_array structure, not a gl_client_array.

The offsets of all fields happened to be the same in both structures, at
least on x86_64.  "Size," "Type," and "Stride" are obviously the same:
both structures start with the same fields, in the same order.

"Enabled" is dicier: there are different fields before it in both
structures, including pointer sized values which might need special
alignment.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: mesa-stable@lists.freedesktop.org

mesa: Remove some dead helper functions.

Dead since the _MaxElement removal, but these functions seemed generally
applicable, so I decided to remove them in a separate patch.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

vc4: Compute max_index instead of trusting the rest of userspace.

max_index was coming from either the user telling us as part of
glDrawRangeElements, or from an incidental calculation as part of some
sort of primitive conversion fallback.  Sometimes, it was just set to the
default "I don't know" ~0 value.

If it wasn't set to the actual max index, then the kernel would reject the
draw call for allowing out-of-bounds VBO reads.  So, compute the max index
from the sizes of the VBOs, which isn't too expensive (unlike mapping and
reading the index buffer) and is reliable.

Fixes piglit vao-element-array-buffer.

vc4: Move shader record setup before the draw call.

The flush only happens after both are written, so we can do them in either
order.  This will let me compute max_index during the shader record setup.

i965/vec4: Call calculate_cfg() in test programs to avoid crashing.

Reported-by: Mark Janes <mark.a.janes@intel.com>

vc4: Add support for gl_PointCoord.

Fixes piglit glsl-fs-pointcoord, point-sprite, and fbo-gl_pointcoord.

vc4: Add support for point size setting.

This is the support for both the global and per-vertex modes.

vc4: Add support for line width setting.

I don't see piglit tests for it, but this should be better than not
emitting it at all.

vc4: Actually add support for polygon offset.

Setting the bit without setting the offset values is kind of useless.
Fixes piglit polygon-offset (but not polygon-mode-offset).

vc4: Fix swapped 565 dithering versus no-dithering render configs.

Fixes many 565 piglit tests (like fbo-generatemipmap-formats) that weren't
expecting dithering.

vc4: Add support for alpha test.

Fixes most of piglit fbo-alphatest-formats (but not RGB565/332).

freedreno/a3xx: initial texture border-color

Still some open questions.. and at any rate, no additional piglit passes
due to various wrap modes that we need to emulate in at least some
cases :-(

But it does fix some mystery page-faults.. So add some comments in the
code where there are things that we need to emulate or do more r/e, and
push as-is.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

util: use linear formats in util_blit_pixels()

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

util: simplify writemask parameters for util_blit_pixels()

Instead of separate color and Z/S writemasks, just have one writemask
parameter that takes a mask of the PIPE_MASK_[RGBAZS] flags.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

util: s/PIPE_TEX_MIPFILTER/PIPE_TEX_FILTER/ in u_blit code

PIPE_TEX_MIPFILTER_x is not legal for the pipe_sampler_state::
min/mag_img_filter fields.  But PIPE_TEX_MIPFILTER_x == PIPE_TEX_FILTER_x
so we were getting lucky.

This also makes the code consistent with u_blitter.c.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

mesa: remove EXT suffix from FBO error messages

And use pass caller="" for _mesa_FramebufferTexture().

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Drop _mesa_getenv() wrapper.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

mesa: Drop _mesa_bsearch() wrapper.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

mesa: Unifdef _WIN32_WCE.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

mesa: Unifdef _XBOX.

Inexplicably added in commit 36940429.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

configure.ac: Remove duplicate -DHAVE_PTHREAD.

It's also defined by the AX_PTHREAD macro.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

configure.ac: Stop checking for perl.

Added by commit a75c6163, but no longer used.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

configure.ac: Use test -a, rather than another test.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

mesa: Use realloc() instead of _mesa_realloc() and remove the latter.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Remove duplicate _mesa_{init,free}_shader_state prototypes.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

gallivm: Wrap deleted inlcude in if HAVE_LLVM < 0x0306

This was missed in 8f4ee56.

i965: Add and use functions to get next/prev blocks.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Call insert and remove functions from exec_node directly.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Make instruction lists local to the bblocks.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/cfg: Add note about double-loop macros and break behavior.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Replace initialization loops with memset().

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/vec4: Don't iterate between blocks with inst->next/prev.

The register coalescing portion of this patch hurts three shaders in
Guacamelee by one instruction each, but examining the diff makes me
believe that what we were generating was (perhaps harmlessly) incorrect.

i965/fs: Don't iterate between blocks with inst->next/prev.

When instruction lists are per-basic block, this won't work.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/cfg: Add macros to iterate through a block given a starting point.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/fs: Make count_to_loop_end() use basic blocks.

When the instructions aren't in a flat list, this wouldn't have worked.
Also, this should be faster.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/vec4: Don't use instruction list after calculating the cfg.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/fs: Don't use instruction list after calculating the cfg.

The only trick is changing a break into a return true in register
coalescing, since the macro is actually a double loop, and break will do
something different than you expect. (Wish I'd realized that earlier!)

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Remove now unneeded calls to calculate_cfg().

Now that nothing invalidates the CFG, we can calculate_cfg() immediately
after emit_fb_writes()/emit_thread_end() and never again.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Remove cfg-invalidating parameter from invalidate_live_intervals.

Everything has been converted to preserve the CFG.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Preserve the CFG in instruction scheduling.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/vec4: Preserve CFG in spill_reg().

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/vec4: Preserve the CFG in a few more places.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>