mesa.git
10 years agoi965/fs: Refactor fs_inst::is_send_from_grf()
Jason Ekstrand [Sat, 13 Sep 2014 18:49:55 +0000 (11:49 -0700)]
i965/fs: Refactor fs_inst::is_send_from_grf()

A switch statement is much easier to read/edit than a big giant or
statement.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Clean up emit_fb_writes
Jason Ekstrand [Sat, 13 Sep 2014 00:49:49 +0000 (17:49 -0700)]
i965/fs: Clean up emit_fb_writes

This splits emit_fb_writes into two functions: emit_fb_writes and
emit_single_fb_write.  This reduces the amount of duplicated code in
emit_fb_writes and makes the register number fiddling less arcane.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Print BAD_FILE registers in dump_instruction
Jason Ekstrand [Tue, 16 Sep 2014 22:56:47 +0000 (15:56 -0700)]
i965/fs: Print BAD_FILE registers in dump_instruction

Sometimes these show up in LOAD_PAYLOAD instructions and it's nice to be
able to see them.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Make compact_virtual_grfs an optimization pass
Jason Ekstrand [Tue, 16 Sep 2014 20:14:09 +0000 (13:14 -0700)]
i965/fs: Make compact_virtual_grfs an optimization pass

Previously we disabled compact_virtual_grfs when dumping optimizations.
The idea here was to make it easier to diff the dumped shader because you
didn't have a sudden renaming.  However, sometimes a bug is affected by
compact_virtual_grfs and, when this happens, you want to keep dumping
instructions with compact_virtual_grfs enabled.  By turning it into an
optimization pass and dumping it along with the others, we retain the
ability to diff because you can just diff against the compact_virtual_grf
output.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi964/fs: Make immediate fs_reg constructors explicit
Jason Ekstrand [Wed, 10 Sep 2014 17:17:28 +0000 (10:17 -0700)]
i964/fs: Make immediate fs_reg constructors explicit

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Make null_reg_* const members of fs_visitor instead of globals
Jason Ekstrand [Wed, 10 Sep 2014 18:28:27 +0000 (11:28 -0700)]
i965/fs: Make null_reg_* const members of fs_visitor instead of globals

We also set the register width equal to the dispatch width.  Right now,
this is effectively a no-op since we don't do anything with it.  However,
it will be important once we add an actual width field to fs_reg.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Use the var_from_vgrf helper function instead of doing it manually
Jason Ekstrand [Tue, 9 Sep 2014 01:34:28 +0000 (18:34 -0700)]
i965/fs: Use the var_from_vgrf helper function instead of doing it manually

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Fix a bug with dead_code_eliminate on large writes
Jason Ekstrand [Wed, 24 Sep 2014 20:16:43 +0000 (13:16 -0700)]
i965/fs: Fix a bug with dead_code_eliminate on large writes

Previously, if an instruction wrote to more than one register, we
implicitly assumed that it filled the entire register.  We never hit this
before because the only time we did multi-register writes was things like
texturing which always wrote to all of the registers.  However, with the
upcoming ability to do 16-wide instructions in SIMD8 and things of that
nature, we can have multi-register writes at offsets and we'll hit this.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Use the UW type for the destination of VARYING_PULL_CONSTANT_LOAD instructions
Jason Ekstrand [Mon, 8 Sep 2014 22:26:24 +0000 (15:26 -0700)]
i965/fs: Use the UW type for the destination of VARYING_PULL_CONSTANT_LOAD instructions

Using a floating-point type doesn't usually cause hangs on my HSW, but the
simulator complains about it quite a bit.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Use offset a lot more places
Jason Ekstrand [Sat, 6 Sep 2014 20:48:34 +0000 (13:48 -0700)]
i965/fs: Use offset a lot more places

We have this wonderful offset() function for advancing registers, but we're
not using it.  Using offset() allows us to do some sanity checking and
avoid manually touching fs_reg::reg_offset.  In a few commits, we will make
offset do even more nifty things for us.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: fix a comment in compact_virtual_grfs
Jason Ekstrand [Tue, 19 Aug 2014 23:11:36 +0000 (16:11 -0700)]
i965/fs: fix a comment in compact_virtual_grfs

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Rewrite fs_visitor::split_virtual_grfs
Jason Ekstrand [Tue, 19 Aug 2014 20:57:11 +0000 (13:57 -0700)]
i965/fs: Rewrite fs_visitor::split_virtual_grfs

The original vgrf splitting code was written with the assumption that vgrfs
came in two types: those that can be split into single registers and those
that can't be split at all It was very conservative and bailed as soon as
more than one element of a register was read or written.  This won't work
once we start allowing a regular MOV or ADD operation to operate on
multiple registers.  This rewrite allows for the case where a vgrf of size
5 may appropriately be split in to one register of size 1 and two registers
of size 2.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs_live_variables: Use var_from_vgrf insead of repeating the calculation
Jason Ekstrand [Sat, 6 Sep 2014 17:37:22 +0000 (10:37 -0700)]
i965/fs_live_variables: Use var_from_vgrf insead of repeating the calculation

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Manually generate the meta fast-clear shader
Jason Ekstrand [Fri, 26 Sep 2014 21:47:03 +0000 (14:47 -0700)]
i965/fs: Manually generate the meta fast-clear shader

Previously, we were generating the fast-clear shader from GLSL.  The
problem is that fast clears require that we use a replicated write rather
than a regular write instruction.  In order to get this we had a
complicated and somewhat fragile optimization pass that looked for places
where we can use a replicated write and used it.  Since replicated writes
have a lot of restrictions, we only ever use them for fast-clear
operations.

This commit replaces the optimization pass with a function that just
generates the shader we want.  This is a) less code, b) less fragile than
the optimization pass, and c) generates a more efficient shader.

Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoradeonsi: Pass the slice size to si_dma_copy_buffer
Michel Dänzer [Tue, 30 Sep 2014 02:16:52 +0000 (11:16 +0900)]
radeonsi: Pass the slice size to si_dma_copy_buffer

Otherwise some parts of tiled slices can be missed.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agoradeonsi: Catch more cases that can't be handled by si_dma_copy_buffer/tile
Michel Dänzer [Thu, 11 Sep 2014 02:49:16 +0000 (11:49 +0900)]
radeonsi: Catch more cases that can't be handled by si_dma_copy_buffer/tile

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agoradeonsi: Fix si_dma_copy(_tile) for compressed formats
Michel Dänzer [Wed, 10 Sep 2014 09:43:56 +0000 (18:43 +0900)]
radeonsi: Fix si_dma_copy(_tile) for compressed formats

Fixes GPUVM faults when running the piglit test "getteximage-formats
init-by-rendering" with R600_DEBUG=forcedma on SI.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agoradeonsi: Fix tiling mode index for stencil resources
Michel Dänzer [Wed, 10 Sep 2014 01:57:58 +0000 (10:57 +0900)]
radeonsi: Fix tiling mode index for stencil resources

We are currently only dealing with depth-only or stencil-only resources
here, not with resources having both depth and stencil[0]. In both cases,
the tiling mode index is in the tile_mode field, not in the
stencil_tile_mode field.

[0] Add an assertion for that.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agoilo: fix format of edge flag pointer
Chia-I Wu [Tue, 30 Sep 2014 08:21:15 +0000 (16:21 +0800)]
ilo: fix format of edge flag pointer

The VE format of edge flag pointers was changed in
780ce576bb1781f027797039693b98253ee4813e.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: add a pass to finalize ilo_ve_state
Chia-I Wu [Tue, 30 Sep 2014 02:32:53 +0000 (10:32 +0800)]
ilo: add a pass to finalize ilo_ve_state

Add finalize_vertex_elements() to finalize ilo_ve_state.  This fixes a
potential issue with URB entry allocation for VS and move the complexity of
gen6_3DSTATE_VERTEX_ELEMENTS() to the new function.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: precalculate aligned depth buffer size
Chia-I Wu [Tue, 30 Sep 2014 07:18:09 +0000 (15:18 +0800)]
ilo: precalculate aligned depth buffer size

To replace the hacky zs_align_surface().

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: use dynamic bo for rectlist vertices
Chia-I Wu [Sat, 27 Sep 2014 16:41:42 +0000 (00:41 +0800)]
ilo: use dynamic bo for rectlist vertices

The size is always 24 bytes.  We can upload them to the dynamic buffer.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agost/xa: Fix regression in xa_yuv_planar_blit()
Thomas Hellstrom [Sun, 28 Sep 2014 15:17:22 +0000 (17:17 +0200)]
st/xa: Fix regression in xa_yuv_planar_blit()

Commit "st/xa: scissor to help tilers" broke xa_yuv_planar_blit() and vmwgfx
textured video. Fix this by implementing scissors also in the yuv draw path.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
10 years agoi965: Delete intel_chipset.h.
Kenneth Graunke [Mon, 29 Sep 2014 19:22:04 +0000 (12:22 -0700)]
i965: Delete intel_chipset.h.

Unused; it was replaced by include/pci_ids/i965_pci_ids.h long ago.

Acked-by: Matt Turner <mattst88@gmail.com>
10 years agodriconf: Correct and update Catalan translation
Alex Henrie [Fri, 26 Sep 2014 20:44:20 +0000 (14:44 -0600)]
driconf: Correct and update Catalan translation

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
10 years agodriconf: Update Spanish translation
Alex Henrie [Fri, 26 Sep 2014 20:32:57 +0000 (14:32 -0600)]
driconf: Update Spanish translation

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
10 years agodriconf: Synchronize po files
Alex Henrie [Fri, 26 Sep 2014 20:31:57 +0000 (14:31 -0600)]
driconf: Synchronize po files

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
10 years agovc4: Don't try to do stores to buffers that aren't bound.
Eric Anholt [Mon, 29 Sep 2014 22:58:15 +0000 (15:58 -0700)]
vc4: Don't try to do stores to buffers that aren't bound.

The code was kind of mixed up what buffers were getting stored in the case
that a resolve bit was unset (which are set based on the GL state at draw
time) and the buffer wasn't actually bound.  In particular, depth-only
rendering would store the color buffer contents, which happen to be
pointing at the depth buffer.

Thanks to clearing out the resolve bits for things we really can't
resolve, now I can drop the safety checks for buffer presence around the
actual stores.

Fixes 42 piglit tests.

10 years agovc4: Shove some depth comparison bits down to where they're used.
Eric Anholt [Mon, 29 Sep 2014 22:31:23 +0000 (15:31 -0700)]
vc4: Shove some depth comparison bits down to where they're used.

10 years agoi965: Use BRW_MATH_DATA_SCALAR when source regioning is scalar.
Matt Turner [Sat, 30 Aug 2014 04:10:32 +0000 (21:10 -0700)]
i965: Use BRW_MATH_DATA_SCALAR when source regioning is scalar.

Notice the mistaken (but harmless) argument swapping in brw_math_invert().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoi965/compaction: Move variable declarations to their uses.
Matt Turner [Sat, 27 Sep 2014 16:42:33 +0000 (09:42 -0700)]
i965/compaction: Move variable declarations to their uses.

Tested-by: Mark Janes <mark.a.janes@intel.com>
10 years agoi965/compaction: Simplify jump target code.
Matt Turner [Sat, 27 Sep 2014 16:39:49 +0000 (09:39 -0700)]
i965/compaction: Simplify jump target code.

My attempts to clarify the code with _compacted/_uncompacted prefixed
variables apparently failed. Hopefully this is clearer.

In any case, the previous code wasn't clear enough to gcc to let it
optimize division by a power of two into a shift. No problems now.

Also, the previous code (in the ADD case) didn't work on 32-bit x86, due
to complicated set of interactions best summed up as unsigned division
and compiler optimizations.

Tested-by: Mark Janes <mark.a.janes@intel.com>
10 years agofreedreno/a3xx: re-emit shaders on variant change
Rob Clark [Mon, 29 Sep 2014 18:29:04 +0000 (14:29 -0400)]
freedreno/a3xx: re-emit shaders on variant change

We need to keep track if a state change other than frag/vert shader
state will trigger us to need a different shader variant, and if
necessary mark the appropriate shader state as dirty.  Otherwise we will
forget to re-emit the shader state.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/ir3: add some cmdline args
Rob Clark [Mon, 29 Sep 2014 12:52:16 +0000 (08:52 -0400)]
freedreno/ir3: add some cmdline args

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/a3xx: add support to emulate GL_CLAMP
Rob Clark [Mon, 29 Sep 2014 14:44:46 +0000 (10:44 -0400)]
freedreno/a3xx: add support to emulate GL_CLAMP

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: add texcoord clamp support to lowering
Rob Clark [Mon, 29 Sep 2014 13:59:27 +0000 (09:59 -0400)]
freedreno: add texcoord clamp support to lowering

This is for hw that needs to emulate some texture wrap modes (like
CLAMP) with some help from the shader.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: move bind_sampler_states to per-generation
Rob Clark [Mon, 29 Sep 2014 18:55:38 +0000 (14:55 -0400)]
freedreno: move bind_sampler_states to per-generation

Keep the existing function as a common helper.  But this lets us move an
a2xx specific hack out of common code.  And the PIPE_TEX_WRAP_CLAMP
emulation will require an a3xx specific hack.  So rather than piling on
hacks, split this out.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/a3xx: fix border color order
Rob Clark [Sat, 27 Sep 2014 22:19:54 +0000 (18:19 -0400)]
freedreno/a3xx: fix border color order

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/a3xx: add 32bit integer vtx formats
Rob Clark [Fri, 26 Sep 2014 14:33:35 +0000 (10:33 -0400)]
freedreno/a3xx: add 32bit integer vtx formats

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agovc4: Add support for GL 1.1's stupid CLAMP mode.
Eric Anholt [Mon, 29 Sep 2014 19:34:17 +0000 (12:34 -0700)]
vc4: Add support for GL 1.1's stupid CLAMP mode.

We just clamp the incoming texture coordinates.  This breaks the lambda
calculation, but it gets the piglit tests to pass.  This is the same
behavior as in i965.

10 years agovc4: Add support for texture border color.
Eric Anholt [Mon, 29 Sep 2014 19:26:21 +0000 (12:26 -0700)]
vc4: Add support for texture border color.

One spot in the docs says that it's stored at a miplevel just beyond the
last miplevel, which was scary.  But really, you just load it as the R
coordinate (which conflicts with cubemaps, but you don't do border
clamping on cubes).

10 years agovc4: Add the necessary stubs for occlusion queries.
Eric Anholt [Mon, 29 Sep 2014 18:33:13 +0000 (11:33 -0700)]
vc4: Add the necessary stubs for occlusion queries.

We have to expose them for GL 2.0, but we just always return a value of 0.
We should be advertising 0 query bits instead of 64, but gallium doesn't
have plumbing for that yet.  At least this stops the segfaults.

10 years agovc4: Optimize out silly SUBs of 0.
Eric Anholt [Thu, 25 Sep 2014 04:57:06 +0000 (21:57 -0700)]
vc4: Optimize out silly SUBs of 0.

Drops instructions on vs-temp-array-mat4-index-col-row-wr.shader_test,
which I was looking at because it's failing to register allocate.

10 years agovc4: Dump constant uniform values in VC4_DEBUG=qir.
Eric Anholt [Thu, 25 Sep 2014 05:03:06 +0000 (22:03 -0700)]
vc4: Dump constant uniform values in VC4_DEBUG=qir.

Definitely helps when trying to understand and optimize a program.

10 years agovc4: Turn a SEL_X_Y(x, 0) into SEL_X_0(x).
Eric Anholt [Thu, 25 Sep 2014 04:37:12 +0000 (21:37 -0700)]
vc4: Turn a SEL_X_Y(x, 0) into SEL_X_0(x).

This may reduce register pressure and uniform counts.  Drops a bunch of 0
uniform loads on vs-temp-array-mat4-index-col-row-wr.shader_test, which is
failing to register allocate.

10 years agovc4: Add support for texture cube maps.
Eric Anholt [Sun, 28 Sep 2014 01:57:20 +0000 (18:57 -0700)]
vc4: Add support for texture cube maps.

It's not passing some of the piglit tests, because it looks like at small
miplevels some contents from surrounding faces are getting filtered in at
the corners.  It does get 7 new tests passing.

10 years agovc4: Rename the slice's size0.
Eric Anholt [Sun, 28 Sep 2014 02:10:34 +0000 (19:10 -0700)]
vc4: Rename the slice's size0.

In the other related fields, "0" refers to the size of the first miplevel,
while this is a field in a slice.  The other implicit slices we have
(cubemap layers) don't vary in size compared to the first one.

10 years agovc4: Stop trying to reuse temporaries that store uniform values.
Eric Anholt [Mon, 29 Sep 2014 16:39:46 +0000 (09:39 -0700)]
vc4: Stop trying to reuse temporaries that store uniform values.

Almost always, the MOV will get copy propagated out.  Even if it doesn't,
it's probably better to just reload the uniform at next use (to reduce
register pressure) rather than try to save instruction count.

I was looking at this because in the presence of texturing (which calls
add_uniform() directly to get the uniform load forced into the
instruction) the c->uniform_contents indices don't match 1:1 with the
temporary qregs.

10 years agoegl: setup screen iterator before using it
Tapani Pälli [Mon, 29 Sep 2014 12:02:57 +0000 (15:02 +0300)]
egl: setup screen iterator before using it

commit 4ed23fd broke creation of pbuffer surfaces, patch fixes
the failure, noticed when running chrome with '--use-gl=egl'.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
10 years agoilo: fix a missing 'else'
Chia-I Wu [Mon, 29 Sep 2014 08:58:14 +0000 (16:58 +0800)]
ilo: fix a missing 'else'

An 'else' is missing in the disassembler.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoglsl: Allow texture2DProjLod and textureCubeLod in GL ES
Kalyan Kondapally [Sat, 27 Sep 2014 02:44:06 +0000 (19:44 -0700)]
glsl: Allow texture2DProjLod and textureCubeLod in GL ES

According to GLES (i.e. 1.0 and above) spec textureCubeLod and
texture2DProjLod are built in functions. We seem to disable support
for these functions with GLES. This patch enables the support.

Signed-off-by: Kalyan Kondapally <kalyan.kondapally@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84355

10 years agoconfigure.ac: bump libdrm_freedreno requirement
Rob Clark [Sun, 28 Sep 2014 16:45:23 +0000 (12:45 -0400)]
configure.ac: bump libdrm_freedreno requirement

We need 2.4.57 for fd_bo_dmabuf() / fd_bo_from_dmabuf().

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agoglsl: Recognize open-coded pow(x, y).
Matt Turner [Sun, 7 Sep 2014 07:41:41 +0000 (00:41 -0700)]
glsl: Recognize open-coded pow(x, y).

pow(x, y) is equivalent to exp(log(x) * y).

instructions in affected programs:     578 -> 458 (-20.76%)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoi965/fs: Don't invalidate live intervals in saturate propagation.
Matt Turner [Mon, 8 Sep 2014 19:09:44 +0000 (12:09 -0700)]
i965/fs: Don't invalidate live intervals in saturate propagation.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
10 years agoi965/fs: Ignore mov.sat instructions in interference check in sat prop.
Matt Turner [Mon, 8 Sep 2014 19:06:49 +0000 (12:06 -0700)]
i965/fs: Ignore mov.sat instructions in interference check in sat prop.

When an instruction's result was consumed by multiple mov.sat
instructions, we would decide that we couldn't move the saturate
modifier because something else was using the result, even though it was
just another mov.sat!

total instructions in shared programs: 4275598 -> 4274842 (-0.02%)
instructions in affected programs:     75634 -> 74878 (-1.00%)

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
10 years agoi965/fs: Walk instructions in reverse in saturate propagation.
Matt Turner [Mon, 8 Sep 2014 19:05:25 +0000 (12:05 -0700)]
i965/fs: Walk instructions in reverse in saturate propagation.

When we find a mov.sat, we search backwards. We might as well search
everything else backwards as well and potentially look at fewer
instructions.

This change enables the next patch.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
10 years agofreedreno/a3xx: add flat interpolation mode
Rob Clark [Fri, 26 Sep 2014 14:33:11 +0000 (10:33 -0400)]
freedreno/a3xx: add flat interpolation mode

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/a3xx: add LOD_BIAS
Rob Clark [Sat, 27 Sep 2014 15:45:26 +0000 (11:45 -0400)]
freedreno/a3xx: add LOD_BIAS

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: turn missing caps into compile warnings
Rob Clark [Fri, 26 Sep 2014 21:56:08 +0000 (17:56 -0400)]
freedreno: turn missing caps into compile warnings

Get rid of the 'default' case (as suggestied by imirkin) so compiler
warns us about missing caps.  Also add some caps that were missing until
now.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: we have more than 0 viewports!
Rob Clark [Fri, 26 Sep 2014 19:40:35 +0000 (15:40 -0400)]
freedreno: we have more than 0 viewports!

4155d1c7 'st/mesa: drop dependence on API profile in st_init_extensions'
broke freedreno because somehow 'PIPE_CAP_MAX_VIEWPORTS' fell through
the cracks.  Resulting that we reported zero viewports.  So the state
tracker never bothered to give us any valid viewport!

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: update generated headers
Rob Clark [Thu, 25 Sep 2014 21:14:05 +0000 (17:14 -0400)]
freedreno: update generated headers

Among other things, fixes a bug for fixed point registers/bitfields.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: don't advertise mirror-clamp support
Rob Clark [Fri, 26 Sep 2014 14:35:52 +0000 (10:35 -0400)]
freedreno: don't advertise mirror-clamp support

At least on a3xx, we cannot do it without some emulation in shader.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: fix compiler warning
Rob Clark [Fri, 26 Sep 2014 14:35:33 +0000 (10:35 -0400)]
freedreno: fix compiler warning

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agoconfigure.ac: Compute LLVM_VERSION_PATCH using llvm-config
Tom Stellard [Thu, 25 Sep 2014 19:55:40 +0000 (12:55 -0700)]
configure.ac: Compute LLVM_VERSION_PATCH using llvm-config

This is the only guaranteed way get the patch level for llvm,
since the define cannot always be found in config.h depending
on the version of llvm or the build system used.

CC: 10.2 10.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
10 years agoRemove Bluegene/L wrappers
Emil Velikov [Thu, 25 Sep 2014 14:26:13 +0000 (15:26 +0100)]
Remove Bluegene/L wrappers

Added back in 2009, with osmesa/GLU in mind. Unlikely to be working
any more since the removal of the static makefiles.

Cc: Brian Paul <brianp@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
10 years agomesa: remove last DJGPP remains
Emil Velikov [Thu, 25 Sep 2014 13:16:16 +0000 (14:16 +0100)]
mesa: remove last DJGPP remains

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
10 years agoconfigure: use explicit enabled/disabled in config switch description
Emil Velikov [Mon, 22 Sep 2014 17:58:19 +0000 (18:58 +0100)]
configure: use explicit enabled/disabled in config switch description

Rather than having double negatives -> disable-opencl, default=no
simply use enabled/disabled. It makes things a bit easier for the
reader and consistent throughout the file.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoconfigure: ask vdpau.pc for the default location of the vdpau drivers
Emil Velikov [Mon, 22 Sep 2014 17:41:58 +0000 (18:41 +0100)]
configure: ask vdpau.pc for the default location of the vdpau drivers

Rather than using hardcoded values honor the value set at libvdpau
build time - i.e. the moduledir variable from vdpau.pc

Update the omx description to match reality while we're here.

Cc: Christian König <deathsimple@vodafone.de>
Cc: Alexandre Demers <alexandre.f.demers@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80615
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoconfigure: drop --with-egl-driver-dir switch
Emil Velikov [Mon, 22 Sep 2014 17:32:03 +0000 (18:32 +0100)]
configure: drop --with-egl-driver-dir switch

The location of the egl driver(s) is matter that we should have
never exposed to the user. Currently the dri2 driver is built
into the libEGL loader, with the gallium based one soon to follow.

v2: Fold EGL_DRIVER_INSTALL_DIR within the makefiles. Suggested by Matt.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80615
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoconfigure: remove non-functional --with-opencl-libdir
Emil Velikov [Mon, 22 Sep 2014 17:12:00 +0000 (18:12 +0100)]
configure: remove non-functional --with-opencl-libdir

The parameter used to control where the gallium pipe-drivers
were installed, but was broken since

commit 45270fb0fd1abd7619933c2845f9dc74cdfbe6fd
Author: Matt Turner <mattst88@gmail.com>
Date:   Thu Sep 13 10:45:01 2012 -0700

    targets/pipe-loader: Convert to automake

Considering that nowadays the pipe-drivers can be used by
more than just the opencl target, even fixing this up will
not be the best idea.

Cc: Matt Turner <mattst88@gmail.com>
Cc: Francisco Jerez <currojerez@riseup.net>
Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61415
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoglsl: Strip arrayness from ir_type_dereference_variable too
Ian Romanick [Wed, 10 Sep 2014 22:19:43 +0000 (15:19 -0700)]
glsl: Strip arrayness from ir_type_dereference_variable too

If the thing being dereferenced is a record or an array of records, it
should be treated as row-major.  The ir_type_derference_record path
already does this, and I think I intended to do the same for this path
in b17a4d5d.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83741
Cc: mesa-stable@lists.freedesktop.org
10 years agoglsl: Round struct size up to at least 16 bytes
Ian Romanick [Wed, 10 Sep 2014 17:54:55 +0000 (10:54 -0700)]
glsl: Round struct size up to at least 16 bytes

Per rule #9, the size of the structure is vec4 aligned.  The MAX2 in the
loop ensures that sizes >= 16 bytes are vec4 aligned.  The new MAX2
after the loop ensures that sizes < 16 bytes are vec4 aligned.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82932
Cc: mesa-stable@lists.freedesktop.org
10 years agoglsl: Make sure row-major array-of-structure get correct layout
Ian Romanick [Tue, 9 Sep 2014 01:25:15 +0000 (18:25 -0700)]
glsl: Make sure row-major array-of-structure get correct layout

Whether or not the field is row-major (because it might be a bvec2 or
something) does not affect the array itself.  We need to know whether an
array element in its entirety is row-major.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83506
Cc: mesa-stable@lists.freedesktop.org
10 years agoglsl: Make sure fields after small structs have correct padding
Ian Romanick [Mon, 8 Sep 2014 19:23:39 +0000 (12:23 -0700)]
glsl: Make sure fields after small structs have correct padding

Previously the linker would correctly calculate the layout, but the
lower_ubo_reference pass would not apply correct alignment to fields
following small (less than 16-byte) nested structures.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83533
Cc: mesa-stable@lists.freedesktop.org
10 years agoilo: give gen6_draw_session a better prefix
Chia-I Wu [Thu, 25 Sep 2014 08:54:28 +0000 (16:54 +0800)]
ilo: give gen6_draw_session a better prefix

gen6_draw_session is not GEN dependent.  Rename it to ilo_render_draw_session.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: make ilo_render opaque
Chia-I Wu [Thu, 25 Sep 2014 08:41:31 +0000 (16:41 +0800)]
ilo: make ilo_render opaque

It is not used outside the render code.  There are also too many details in it
that we do not want other components to access directly.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: make ilo_render_emit_draw() direct
Chia-I Wu [Thu, 25 Sep 2014 04:02:33 +0000 (12:02 +0800)]
ilo: make ilo_render_emit_draw() direct

Remove emit_draw() and ILO_RENDER_DRAW indirections.  With all emit functions
being direct now, ilo_render_estimate_size() and more can also be removed.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: make ilo_render_emit_rectlist() direct
Chia-I Wu [Thu, 25 Sep 2014 04:02:33 +0000 (12:02 +0800)]
ilo: make ilo_render_emit_rectlist() direct

Remove emit_rectlist() and ILO_RENDER_RECTLIST indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: clean up draw and rectlist state emission
Chia-I Wu [Thu, 25 Sep 2014 05:22:19 +0000 (13:22 +0800)]
ilo: clean up draw and rectlist state emission

Add these new high-level functions

  ilo_render_get_draw_dynamic_states_len()
  ilo_render_emit_draw_dynamic_states()
  ilo_render_get_rectlist_dynamic_states_len()
  ilo_render_emit_rectlist_dynamic_states()
  ilo_render_get_draw_surface_states_len()
  ilo_render_emit_draw_surface_states()

for draw and rectlist state emission.  They are implemented in the new
ilo_render_dynamic.c and ilo_render_surface.c.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: sanity check ilo_render_get_*_len()
Chia-I Wu [Thu, 25 Sep 2014 04:44:53 +0000 (12:44 +0800)]
ilo: sanity check ilo_render_get_*_len()

Assert that we never write more than what ilo_render_get_*_len() returns.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: simplify ilo_render_get_query_len()
Chia-I Wu [Thu, 25 Sep 2014 04:32:21 +0000 (12:32 +0800)]
ilo: simplify ilo_render_get_query_len()

For all supported query types, we always emit a PIPE_CONTROL.  Call
ilo_render_get_flush_len() for simplicity and clarity.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: make ilo_render_emit_query() direct
Chia-I Wu [Thu, 25 Sep 2014 04:10:00 +0000 (12:10 +0800)]
ilo: make ilo_render_emit_query() direct

Remove emit_query() and ILO_RENDER_QUERY indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: make ilo_render_emit_flush() direct
Chia-I Wu [Thu, 25 Sep 2014 04:02:33 +0000 (12:02 +0800)]
ilo: make ilo_render_emit_flush() direct

Remove emit_flush() and ILO_RENDER_FLUSH indirections.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: simplify ilo_render invalidation
Chia-I Wu [Wed, 24 Sep 2014 07:24:25 +0000 (15:24 +0800)]
ilo: simplify ilo_render invalidation

ilo_render is based on ilo_builder.  We should only care if the builder
buffers are invalidated, or if the hardware context is invalidated.  Replace
ilo_render_invalidate() with flags by ilo_render_invalidate_builder() and
ilo_render_invalidate_hw().

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: add ilo_builder_{dynamic,surface}_used()
Chia-I Wu [Thu, 25 Sep 2014 06:53:34 +0000 (14:53 +0800)]
ilo: add ilo_builder_{dynamic,surface}_used()

Return how many DWords are used in dynamic and surface buffers respectively.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: rename state buffer to dynamic buffer
Chia-I Wu [Thu, 25 Sep 2014 06:46:33 +0000 (14:46 +0800)]
ilo: rename state buffer to dynamic buffer

Both dynamic buffer and surface buffer are state buffers.  We should not use
state buffer to refer to the former.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: constify ilo_render in ilo_render_get_sample_position()
Chia-I Wu [Wed, 24 Sep 2014 07:18:02 +0000 (15:18 +0800)]
ilo: constify ilo_render in ilo_render_get_sample_position()

It is a getter and is not supposed to modify ilo_render.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: rename 3d_pipeline to render
Chia-I Wu [Wed, 24 Sep 2014 06:31:07 +0000 (14:31 +0800)]
ilo: rename 3d_pipeline to render

Follow the file renaming.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: remove struct ilo_3d
Chia-I Wu [Wed, 24 Sep 2014 05:11:25 +0000 (13:11 +0800)]
ilo: remove struct ilo_3d

Move members of ilo_3d that still make sense to ilo_context.  With ilo_3d
gone, rename functions whose names begin with ilo_3d to something more
appropriate.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: rename ilo_3d_pipeline*.[ch] to ilo_render*.[ch]
Chia-I Wu [Wed, 24 Sep 2014 04:27:23 +0000 (12:27 +0800)]
ilo: rename ilo_3d_pipeline*.[ch] to ilo_render*.[ch]

They are used to build render engine commands, which can be more than 3D.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agoilo: rename ilo_3d.[ch] to ilo_draw.[ch]
Chia-I Wu [Wed, 24 Sep 2014 05:06:45 +0000 (13:06 +0800)]
ilo: rename ilo_3d.[ch] to ilo_draw.[ch]

There is not much left in struct ilo_3d.  We want to kill it and ilo_3d.[ch]
will be bad names.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
10 years agost/mesa: Use PIPE_USAGE_STAGING for GL_STATIC/DYNAMIC/STREAM_READ buffers
Michel Dänzer [Thu, 25 Sep 2014 06:29:56 +0000 (15:29 +0900)]
st/mesa: Use PIPE_USAGE_STAGING for GL_STATIC/DYNAMIC/STREAM_READ buffers

Such buffers can only be useful by reading from them with the CPU, so we
need to make sure CPU reads are fast.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84178
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org
10 years agoglsl: remove unused link_assign_uniform_block_offsets
Tapani Pälli [Wed, 24 Sep 2014 11:09:23 +0000 (14:09 +0300)]
glsl: remove unused link_assign_uniform_block_offsets

ubo offsets are assigned by link_uniform_blocks since 514f8c7e

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
10 years agoglsl: Structures must have same name to be considered same type.
Kalyan Kondapally [Mon, 22 Sep 2014 12:11:29 +0000 (15:11 +0300)]
glsl: Structures must have same name to be considered same type.

According to GLSL(4.2) and GLSL-ES (1.0, 3.0) spec, Structures must
have the same name to be considered same type. We currently ignore
the name check while checking if two records are same. This patch
fixes this.

Patch fixes failing tests in WebGL conformance test
'shaders-with-uniform-structs' when running Chrome on OpenGL ES.

v2: Do not force name comparison with unnamed types (Tapani)
v3: Cleanups (Matt)

Signed-off-by: Kalyan Kondapally <kalyan.kondapally@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83934

10 years agoglsl: fix uniform location count used for glsl types
Tapani Pälli [Wed, 27 Aug 2014 11:12:27 +0000 (14:12 +0300)]
glsl: fix uniform location count used for glsl types

Patch fixes the slot count used by vector types and adds 1 slot
to be used by image and sampler types.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82921

10 years agogm107/ir: take relative pfetch offset into account
Ilia Mirkin [Fri, 26 Sep 2014 04:18:38 +0000 (00:18 -0400)]
gm107/ir: take relative pfetch offset into account

There is no dedicated instruction for this, so just combine it with the
constant offset.

Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
10 years agogallivm: More fallout from disabling with LLVM 3.6
Michel Dänzer [Thu, 25 Sep 2014 03:23:02 +0000 (12:23 +0900)]
gallivm: More fallout from disabling with LLVM 3.6

The draw module would still try to use gallivm, causing many piglit tests
to fail with an assertion failure. llvmpipe might have been similarly
affected.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
10 years agogm107/ir: add support for indirect const buffer selection
Ilia Mirkin [Thu, 25 Sep 2014 21:14:30 +0000 (17:14 -0400)]
gm107/ir: add support for indirect const buffer selection

This was missed in the commit that enabled it for fermi/kepler as part
of ARB_gpu_shader5

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
10 years agogm107/ir: fix texture argument order
Ilia Mirkin [Thu, 25 Sep 2014 07:51:37 +0000 (03:51 -0400)]
gm107/ir: fix texture argument order

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
10 years agogm107/ir: fix manual TXD for array targets
Ilia Mirkin [Thu, 25 Sep 2014 04:27:31 +0000 (00:27 -0400)]
gm107/ir: fix manual TXD for array targets

This parallels the fixes in commit afea9bae.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>