nir: Use nir_intrinsic_set_base in atomic lowering.

This is more readable and also offers assertions that protect against
setting const_index fields on the wrong kind of intrinsic.

Suggested by Jason.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Split nir_lower_io's input/output/atomic handling into helpers.

The original function was becoming a bit hard to read, with the details
of creating and filling out load/store/atomic atomics all in one
function.

This patch makes helpers for creating each type of intrinsic, and also
combines them with the *_op() helpers, as they're closely coupled and
not too large.

v2: Minor style nits from Jason.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Drop bogus nir_var_shader_in case in nir_lower_io's store_op().

This can't happen, the caller asserts that mode is shader_out or shared.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Share destination rewriting and replacement code in IO lowering.

Both loads and atomics had identical code to rewrite destinations,
and all cases had the same two lines to replace instructions.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Share get_io_offset handling in nir_lower_io.

The load/store/atomic cases all duplicated the get_io_offset code, with
a few tiny differences: stores didn't bother checking for per-vertex
inputs, because they can't be stored to, and atomics didn't check at
all, since shared variables aren't per-vertex.

However, it's harmless to check, and allows us to share more code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Make a 'var' temporary in nir_lower_io.

Less typing and word wrapping issues than intrin->variables[0]->var.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Remove the emit_linterp() helper.

Rather than computing the barycentric mode each time we emit a LINTERP,
we can simply compute it once, as soon as we know we're doing non-flat
interpolation.

At that point, emit_linterp() doesn't do much, so fold it into the
call sites and drop it.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Reduce the number of fs_reg(brw_reg) calls in LINTERP handling.

A bit tidier.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Make a barycentric_mode() helper function.

This combines two copies of basically the same code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Rename brw_wm_barycentric_interp_mode to brw_barycentric_mode.

brw_wm_barycentric_interp_mode is wordy, brw_barycentric_mode is less
typing and suffers from fewer line wrapping problems.

The enum values themselves don't really benefit from "WM" in the name,
either.  Put "BARYCENTRIC" first instead of at the end and drop "WM".

Generated by:

for file in *.c *.cpp *.h; do sed -i \
   -e 's/brw_wm_barycentric_interp_mode/brw_barycentric_mode/g' \
   -e 's/BRW_WM_\([A-Z_]*\)_BARYCENTRIC/BRW_BARYCENTRIC_\1/g' \
   -e 's/BRW_WM_BARYCENTRIC_INTERP_MODE_COUNT/BRW_BARYCENTRIC_MODE_COUNT/g' \
   $file;
done

with a few whitespace changes.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Handle default interpolation modes and locations in NIR.

This consolidates a bunch of hacks in a single place - by setting
the interpolation modes and locations on variables appropriately,
we can simply trust them in the rest of the code.  This avoids
having to handle INTERP_QUALIFIER_NONE, gl_Color overrides,
sample-shading overrides, and Gen4-5 centroid-overrides in a bunch
of places.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/context: Remove some unnecessary vfuncs

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Get rid of gen6_surface_state.c

The only useful thing left was gen6_init_vtable_surface_functions which we
can easily put in brw_wm_surface_state.c.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Use ISL for emitting buffer surface states

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Account for the element size in emit_buffer_surface_state

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen4-6: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen6: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen7: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen7: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen8: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen8: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Add generic surface update functions based on ISL

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/surface_state: Rename brw_update to gen4_update

We're about to add generic versions which work across gens and those should
have the brw name.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Use ISL for emitting image surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use a generic ISL path for texture surfaces on gen8

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/state: Add a helper for emitting a surface state using isl

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for texture surfaces on gen6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for texture surfaces on gen7

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen7

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen8-9

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Add a generic ISL-based surface state emit path

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting the aux isl_surf from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting the ISL clear color from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting an isl_surf from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Add an isl_device to the brw_context

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl/state: Add support for OffsetX/Y in surface state

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Add support for filling out surface states all the way back to gen4

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Add an ISL_DEV_IS_G4X macro

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Add macros and #includes for gens 4-6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Make X/Y Offset field of SURFACE_STATE a uint

THe offset type has special implications that it's intended to be some form
of aligned memory address.  These assumptions allow it to handle the case
where there is some alignment requirement on the offset and the bottom bits
are used for other things.  However, the offsets in the surface state field
are really just unsigned integers.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Add enough XML for gens 4, 4.5, and 5 to get SURFACE_STATE

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Chad Versace <chad.versace@intel.com>

isl/state: Divide the aux qpitch by 4

The field is in multiples of 4 like regular QPitch.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Fix the bs assertion in isl_tiling_get_info

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

anv: Handle VK_WHOLE_SIZE properly for buffer views

The old calculation, which used view->offset, encorporated buffer->offset
into the size calculation where it doesn't belong.  This meant that, if
buffer->offset > buffer->size, you would always get a negative size.  This
fixes 170 dEQP-VK.renderpass.attachment.* Vulkan CTS tests on Haswell.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

anv: Add an align_down_npot_u32 helper

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

anv: Enable independentBlend on gen7

We can totally do it, we were just only setting up one BLEND_STATE and, now
that the code is unified with gen8, we should be handling it correctly.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

anv/pipeline: Unify blend state setup between gen7 and gen8

This fixes all 674 broken dEQP-VK.pipeline.blend Vulkan CTS tests on
Haswell.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

genxml: Make gen6-7 blending look more like gen8

This renames BLEND_STATE to BLEND_STATE_ENTRY and adds an new struct
BLEND_STATE which is just an array of 8 BLEND_STATE_ENTRYs.  This will make
it much easier to write gen-agnostic blend handling code.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

vc4: Speed up glGenerateMipmaps by avoiding shadow baselevel.

To support general GL_TEXTURE_BASE_LEVEL we have to copy to a temporary
miptree.  However, if a single level is being selected, we can use the
existing miptree and force all the sampling to be from that particular
level.

This avoids a ton of software fallbacks in glGenerateMipmaps(), which uses
base levels in the blit implementation in gallium.  Improves "glmark2 -b
terrain" from 2 fps to 3 (perhaps some more precision would be useful?),
and cuts its CPU usage during the benchmarking from ~30% to ~10% (total
CPU time from 8.8s to 7.6s).

vc4: Drop VC4_DIRTY_TEXSTATE in favor of the per-stage flags.

The compiler uses the per-stage flags already, so it didn't need this.
vc4_uniforms was using it, so just replace it with both of the stage flags
for now.

vc4: Remove dead dirty_samplers field.

We use a big VC4_DIRTY_FRAGTEX/VC4_DIRTY_VERTEX on the stage, instead.

vc4: Turn on control flow support in the simulator environment.

We can't merge the non-simulator support until we merge the kernel side and
get a new libdrm release.

mesa: handle numLevels, numSamples in _mesa_test_proxy_teximage()

If numSamples > 0, we can compute the size of the whole mipmapped texture.
That's the case for glTexStorage(GL_PROXY_TEXTURE_x).

Also, multiply the texture size by numSamples for MSAA textures.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: add proxy texture targets in _mesa_next_mipmap_level_size()

So we can use it for computing size of proxy textures.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: add numLevels, numSamples to Driver.TestProxyTexImage()

So that the function can work properly with glTexStorage(), where we know
how many mipmap levels there are.  And so we can compute storage for MSAA
textures.

Also, remove the obsolete texture border parameter.

A subsequent patch will update _mesa_test_proxy_teximage() to use these
new parameters.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: use _mesa_clear_texture_image() in clear_texture_fields()

This avoids a failed assert(img->_BaseFormat != -1) in
init_teximage_fields_ms() because the internalFormat argument is GL_NONE.
This was hit when using glTexStorage() to do a proxy texture test.

Fixes a failure with the updated Piglit tex3d-maxsize test.

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

svga: avoid ubinding render targets that have already been unbound

Fixed the remaining redundant SetRenderTargets command emission.

Tested with lightsMark2008, Heaven, mtt piglit, glretrace, conform.

Reviewed-by: Brian Paul <brianp@vmware.com>

svga: dump code for GenMips.

Reviewed-by: Brian Paul <brianp@vmware.com>

Disable use of weak in threads_posix.h on Cygwin

Weak doesn't work the same on PE/COFF as on ELF, they are only weak
references.  Specifically, since nothing else pulls in the object which
contains pthread_mutexattr_init() (and coming from the C library, that is
the only thing that object contains), means that it ends up as 0

Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>

configure: Don't require pthread-stubs on Cygwin

Commit 1f4869a2 unconditionally requires pthread-stubs.  Unfortunately, the
cleverness that pthread-stubs is doesn't work with PE/COFF, and historically
Cygwin doesn't have a pthread-stubs.pc.

Don't require pthread-stubs on Cygwin.

Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>

Use correct names for dlopen()ed files on Cygwin

Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>

configure: Define _GNU_SOURCE for Cygwin as well

Cygwin headers are now a bit more correct in handling feature test macros,
so use _GNU_SOURCE when building for Cygwin, as well.

(Notwithstanding f381c27c, we should probably have always been using
_GNU_SOURCE, since asprintf() is used by mesa in places)

Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>

Revert "isl: Don't filter tiling flags if a specific tiling bit is set"

This reverts commit 091f1da902c71ac8d3d27b325a118e2f683f1ae5 .

Although a user may specify a specfic tiling bit, ISL should still
prevent incompatible tiling/surface combinations.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

anv/blit2d: Copy with stencil sources when needed

In the next patch, ISL will unconditionally perform verification of a
surface's tiling and usage. Since it will require that w-tiled images
be stencil buffers, create a stencil surface to copy from a
w-tiled/stencil surface.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/image: Fix initialization of the ISL tiling

If an internal user creates an image with Vulkan tiling VK_IMAGE_TILING_OPTIMAL
and an ISL tiling that isn't set, ISL will fail to create the image as
anv_image_create_info::isl_tiling_flags will be an invalid value.

Correct this by making anv_image_create_info::isl_tiling_flags an opt-in,
filtering bitmask, that allows the caller to specify which ISL tilings are
acceptable, but not contradictory to the Vulkan tiling.

Opt-out of filtering for vkCreateImage.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

isl: Fix isl_tiling_is_any_y()

Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/device: Fix max buffer range limits

Set limits that are consistent with ISL's assertions in
isl_genX(buffer_fill_state_s)() and Anvil's format-DescriptorType
mapping in anv_isl_format_for_descriptor_type().

Fixes the following new crucible tests:
* stress.limits.buffer-update.range.uniform
* stress.limits.buffer-update.range.storage

These tests are in this patch: https://patchwork.freedesktop.org/patch/98726/

Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

isl: Fix assert on raw buffer surface state size

See inline PRM reference.

Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cmd_buffer: Simplify range member assignment

A ternary is clearer because the range member is assigned one of two values
dependant on one condition.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cmd_buffer: Remove unused variable

This became unused due to commit 612e35b2c65c99773b73e53d0e6fd112b1a7431f .

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/descriptor_set: Fix binding partly undefined descriptor sets

Section 13.2.3. of the Vulkan spec requires that implementations be able to
bind sparsely-defined Descriptor Sets without any errors or exceptions.

When binding a descriptor set that contains a dynamic buffer binding/descriptor,
the driver attempts to dereference the descriptor's buffer_view field if it is
non-NULL. It currently segfaults on undefined descriptors as this field is never
zero-initialized. Zero undefined descriptors to avoid segfaulting. This
solution was suggested by Jason Ekstrand.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96850
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

svga: handle mismatched number of samplers, sampler views

in svga_init_shader_key_common().  Since the CSO module only tracks
sampler views for fragment shaders, the number of samplers and sampler
views can be mismatched for other types of shaders.  This situation
triggered an assertion in Chrome with maps.google.com

This patch adds defensive code to handle that situation.

Fixes VMware bug 1694027
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

st/omx/enc: check uninitialized list from task release

The uninitialized list should be checked and returned.

Thank Julien for the notification and suggested fix.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

nv50/ir: add missing string for SV_WORK_DIM

Fixes: 2aa1197 ("nouveau: Add support for SV_WORK_DIM")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Revert "radeon/llvm: Use alloca instructions for larger arrays"

This reverts commit 513fccdfb68e6a71180e21827f071617c93fd09b.

Bioshock Infinite hangs with that.

r600,compute: Reserve vtx 3 for kernel arguments

Using vtx 0 does not work for dynamic offsets.

v2: add explanatory comment

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

radeon/uvd: fail to create a decoder if RUVD_MSG_CREATE submission fails

This is the bare minimum for reporting the error to the user.

Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/amdgpu: return an error on IB submission failures

Reviewed-by: Christian König <christian.koenig@amd.com>

gallium/radeon: add a return value to cs_flush

Required by our UVD code.

Reviewed-by: Christian König <christian.koenig@amd.com>

glsl/types: Use _mesa_hash_data for hashing function types

This is way better than the stupid string approach especially since you
could overflow the string.  Again, I thought I had something better at one
point but it obviously got lost.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

glsl/types: Fix function type comparison function

It was returning true if the function types have different lengths rather
than false.  This was new with the SPIR-V to NIR pass and I thought I'd
fixed it a while ago but it may have gotten lost in rebasing somewhere.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

freedreno/a4xx: Fix sign compare warnings

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a3xx: Fix sign compare warnings

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a2xx: Fix sign compare warnings

Signed-off-by: Rob Clark <robdclark@gmail.com>

radeon/vce: handle newly added parameters

Replace the previous hardcoded value with newly defined parameters

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/omx: assign previous values to new structure

Assign previously hardcoded values for OMX to newly defined
structure. As a result, OMX behaviour will not change at all.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: add parameters for VAAPI encode

Allow to specify more parameters in the encoding interface
which previously just hardcoded in the encoder

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/mesa: fix reference counting bug in st_vdpau

Otherwise we leak the resources created for the DMA-buf descriptors.

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: 12.0 <mesa-stable@lists.freedesktop.org>
Tested-and-Reviewed by: Leo Liu <leo.liu@amd.com>
Ack-by: Tom St Denis <tom.stdenis@amd.com>

vc4: Emit resets of the uniform stream at the starts of blocks.

If a block might be entered from multiple locations, then the uniform
stream will (probably) be at different points, and we need to make sure
that it's pointing where we expect it to be.  The kernel also enforces
that any block reading a uniform resets uniforms, to prevent reading
outside of the uniform stream by using looping.

vc4: Add support for scheduling of branch instructions.

For now we don't fill the delay slots, and instead just drop in NOPs.

vc4: Move the QPU instructions to schedule into each block.

We'll want to schedule them individually, to handle delay slots.

vc4: Disable vc4_opt_vpm in the presence of control flow.

It's a really valuable pass currently, but it will be a mess to rewrite
for control flow.  For now, just disable it if we have multiple blocks
present.

vc4: Convert vc4_opt_dead_code to work in the presence of control flow.

With control flow, we can't be sure that we'll see the uses of a variable
before its def as we walk backwards.  Given that NIR is eliminating our
long chains of dead code, a simple solution for now seems fine.

This slightly changes the order of some optimizations, and so an opt_vpm
happens before opt_dce, causing 3 dead MOVs to be turned into dead FMAXes
in Minecraft:

instructions in affected programs:     52 -> 54 (3.85%)

vc4: Update copy propagation for control flow.

Previously, we could assume that a MOV from a temp was always an available
copy, because all temps were SSA in NIR, and their non-SSA state in QIR
was just due to the fact that they were from a bcsel or pack_unorm_4x8, so
we could use the current value of the temp after that series of QIR
instructions to define it.

However, this is no longer the case with control flow.  Instead, we track
a new array of MOVs defined within the block that haven't had their source
or dest killed yet, and use that primarily.  We fall back to looking
through the QIR defs array to handle across-block MOVs, but now require
that copies from the SSA defs have an SSA src as well.

i965/fs: emit DIM instruction to load 64-bit immediates in HSW

v2 (Matt):
- Use brw_imm_df() as source argument of DIM instruction.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/eu: set DF imm value to the source of DIM

According to HSW's PRM, vol02b, the DIM instruction has the following
restriction:

"Restriction : src0 must be immediate. src0 must specify the :f (F, Float)
type encoding but is an immediate 64-bit DF (Double Float) value. dst
must have type DF."

This commit allows to upload the immediate 64-bit DF value to the source
of a DIM instruction even when it is of float type encoding.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: enable the emission of the DIM instruction

v2 (Matt):
- Take a DF source argument for the DIM instruction emission
in the visitors.
- Indentation.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

anv: Add a stub for CmdCopyQueryPoolResults on Ivy Bridge

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

i965: fix compiler warnings for 32bit build

Reviewed-by: Matt Turner <mattst88@gmail.com>