radeonsi: clean up how internal compute dispatches are handled

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: 19.3 <mesa-stable@lists.freedesktop.org>

Revert "radeonsi: unbind image before compute clear"

This reverts commit 3a527eda7ceee37643f948bfcf05285c5aa3a4d6.

It's incorrect.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

aco: implement nir_intrinsic_load_barycentric_at_sample on GFX6

GFX6 doesn't have FLAT instructions which means we have to emit
a 64-bit MUBUF load.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: add new addr64 bit to MUBUF instructions on GFX6-GFX7

According to the different ISA docs (and to LLVM), this bit seems
to only exists on GFX6-GFX7.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: do not use the vec3 variant for loads on GFX6

GFX6 only supports vec3 with load/store format.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: do not use the vec3 variant for stores on GFX6

GFX6 only supports vec3 with load/store format.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: fix constant folding of SMRD instructions on GFX6

SMRD instructions have an 8-bit dword offset on SI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

anv: Canonicalize buffer formats for image/buffer copies

Some formats, in particular YCbCr formats and ASTC have additional
restrictions.  We already whack ASTC formats to RGBA32_UINT because the
hardware doesn't allow LINEAR with ASTC.  However, we need to fix YCbCr
formats as well because they come with alignment restrictions that we
can't guarantee are satisfied.  We're using blorp_copy to do the copies
so we may as well just stomp formats for everything.

Fixes: b24b93d5843 "anv: enable VK_KHR_sampler_ycbcr_conversion"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>

anv/blorp: Rename buffer image stride parameters

The new names fit better with the Vulkan names and don't pretend to be
an actual image extent.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>

Revert "gallium: add st_context_iface::flush_resource to call FLUSH_VERTICES"

This reverts commit bec9c90b5ecf9cc2dc580f9ff297f94ba5aa3506.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>

Revert "st/dri: do FLUSH_VERTICES before calling flush_resource"

This reverts commit 3ba16d36c988a1c7b31c7fe44c1b6a24d9d8227d.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>

aco: fix fall-through test in try_remove_simple_block() with back-edges

3bca0af2 enhanced empty block determination which exposed this bug and
created an infinite loop in a Guild Wars 2 shader.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 3bca0af25dbf6d6b162463138100abb20bc1a1cc
     ('aco: ignore parallelcopies to the same register on jump threading')

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2364
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3452>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3452>

docs/GL4: update gallium/swr features

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

aco: fix stack buffer overflow in apply_sgprs()

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: cef78797191 ('aco: rewrite apply_sgprs()')
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2361
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3442>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3442>

anv: add assert for isl_mod_info in choose_isl_tiling_flags

CID: 1457859
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>

anv: fix assert in GetImageDrmFormatModifierPropertiesEXT

CID: 1457861
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>

isl/gen12: add reminder comment about missing WA with 3D surfaces

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3441>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3441>

panfrost: Dynamically allocate shader variants

This fixes a crash in LZDoom where over 16 shader variants are needed
for a few shaders in some maps, and should also save a few kilobytes
of RAM as most of the time only one or two variants of the 8 previously
allocated are actually needed.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Expose some functionality with dEQP flag

These features are stable enough that they don't need to be hidden.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3464>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3464>

pan/midgard: Fix recursive csel scheduling

Corner case causing invalid scheduling on shaders with nested csels,
i.e. GLSL code resembling:

   (foo ? bool1 : bool2) ? x : y

By explicitly disallowing csels this is fixed.

Fixes INSTR_INVALID_ENC on a glamor shader (noticeable with slowdown and
visual corruption when scrolling "too far" on GTK apps).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3463>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3463>

panfrost: Identify un/pack colour opcodes

We still need to identify formats in the disassembler, but this will at
least get the opcode name clear.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>

pan/midgard: Bytemasks should round up, not round down

Otherwise we'll lost components in DCE.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>

panfrost: Compact the bo_access readers array

Previously, the array bo_access->readers was only cleared when there
were no unsignaled fences, which in some situations never happened.

That resulted in the array having thousands of NULL pointers, but only
a handful of active readers.

With this patch, all the unsignaled readers are moved to the front of
the array, effectively building a new array only containing the active
readers in-place. This results in the readers array usually only having
a couple of elements.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3419>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3419>

zink: support arrays of samplers

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: support sampling non-float textures

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: store image-type per texture

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: avoid incorrect vector-construction

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: support offset-variants of texturing

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: implement nir_texop_txs

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

docs: fixup indentation

The most canonical indentation-style here is two spaces, which is what
the standard boilerplate in all documents use. So let's normalize to
that.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: remove pointless, stray newline

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: use [1] instead of asterisk for footnote

While we're at it, make it a link as well.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: remove trailing newlines

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: remove leading spaces

There's no good reason to have leading space in these pre-formatted
blocks. It looks strange, so let's get rid of it.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: remove trailing header

This header has been there since the document was added, but contains
nothing. So let's get rid of it.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: use figure/figcaption instead of tables

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: do not use definition-list for sub-topics

The dl-tag isn't a neat tool for defining sub-headings, it's a semantic
tool for defining definitions and their meaning. Let's insetad use
normal sub-headings instead.

To make the last few paragraphs stand out from the above, let's add a
sub-heading for those as well.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

freedreno/a6xx: add PROG_FB_RAST stateobj

For the handful of registers that depend on the union of program/
framebuffer/rasterizer state.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

freedreno/a6xx: move dynamic program state to streaming stateobj

Move the program state which we can't pre-bake to a streaming state
object, rather than emitting directly in the draw cmdstream.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

freedreno/a6xx: drop a few more per-draw registers

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

freedreno/a6xx: separate rast stateobj for prim restart

This lets us move PC_PRIMITIVE_CNTL into the rasterizr stateobj, rather
than unconditionally emitting it directly in the cmdstream on every
draw.

This also starts adding some tracking about previous draw state, so that
following patches can limit some of the register writes we currently
emit on every draw.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

freedreno/a6xx: cleanup rasterizer state

All but one of the reg values is only used in the stateobj, so we can
inline the register value setup and stateobj construction.  While we
are at it, switch over to the new register builders.

Prep work for next patch.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

freedreno/a6xx: limit scratch/debug markers to debug builds

The overhead does seem to matter when you have a high enough # of draw
calls that effect few bins/pixels, because these writes would happen
unconditionally (ie. not part of a state-group).

Possibly we could keep these if we moved them into a state-group so the
register writes would be no-ops on bins with no geometry.  OTOH I
usually end up adding in a WFI when using them scratch reg values to
track down a crash.  (So add a WFI to mitigate the annoyance of needing
to use a debug build to get scratch regs to locate the position of a
crash/hang in the cmdstream.)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3435>

iris: Fix some indentation in iris_init_render_context

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>

util/vector: Fix u_vector_foreach when head rolls over

Also add unit tests for u_vector.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3453>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3453>

intel/fs: Switch to standard vector layout for barycentrics at optimization time.

This involves permuting the registers of barycentric vectors to have
the standard X[0-n] Y[0-n] layout at NIR translation time.
Barycentrics are converted to the format expected by the PLN
instruction in the lower_barycentrics() pass run after the
optimization loop.

Main reason is correctness of SIMD32 fragment shaders.  The
shuffle_from_pln_layout() and shuffle_to_pln_layout() helpers used
during NIR translation are busted for SIMD32.  This leads to serious
corruption at present with INTEL_DEBUG=do32, especially on Gen11+
where these helpers are hit more frequently due to the lack of a
hardware PLN instruction.

Of course one could have chosen to fix those helpers instead, but
there is another far more subtle issue that was reported during review
of the SIMD32 fragment shader codegen changes: The SIMD splitting pass
currently handles SIMD32 barycentric vectors as if they had the
standard X[0-n] Y[0-n] layout, even though they are interleaved for
the PLN instruction, which causes incorrect execution masks to be
applied to the MOVs unzipping barycentric vectors in cases where a
LINTERP instruction occurs under non-uniform control flow.

I'm not aware of any conformance regressions due to the latter issue
at present, but for our peace of mind let's move the conversion to the
PLN layout into the lower_barycentrics() pass run after
lower_simd_width().

This leads to the following shader-db improvements (including SIMD32
shaders) in combination with the previous back-end preparation changes
-- Without them (especially the copy propagation changes) this would
lead to a massive number of regressions.  On ICL:

   total instructions in shared programs: 20662316 -> 20466903 (-0.95%)
   instructions in affected programs: 10538474 -> 10343061 (-1.85%)
   helped: 68775
   HURT: 6

   total spills in shared programs: 8938 -> 8748 (-2.13%)
   spills in affected programs: 376 -> 186 (-50.53%)
   helped: 9
   HURT: 5

   total fills in shared programs: 8965 -> 8663 (-3.37%)
   fills in affected programs: 965 -> 663 (-31.30%)
   helped: 9
   HURT: 6

   LOST:   146
   GAINED: 43

On SKL:

   total instructions in shared programs: 18725867 -> 18614912 (-0.59%)
   instructions in affected programs: 3876590 -> 3765635 (-2.86%)
   helped: 27492
   HURT: 2

   LOST:   191
   GAINED: 417

On SNB:

   total instructions in shared programs: 14573613 -> 13980646 (-4.07%)
   instructions in affected programs: 5199074 -> 4606107 (-11.41%)
   helped: 29998
   HURT: 0

   LOST:   21
   GAINED: 30

Results are somewhat less impressive but still significant without
SIMD32 fragment shaders enabled.  On ICL:

   total instructions in shared programs: 16148728 -> 16061659 (-0.54%)
   instructions in affected programs: 6114788 -> 6027719 (-1.42%)
   helped: 42046
   HURT: 6

   total spills in shared programs: 8218 -> 8028 (-2.31%)
   spills in affected programs: 376 -> 186 (-50.53%)
   helped: 9
   HURT: 5

   total fills in shared programs: 8953 -> 8651 (-3.37%)
   fills in affected programs: 965 -> 663 (-31.30%)
   helped: 9
   HURT: 6

   LOST:   0
   GAINED: 3

On SKL:

   total instructions in shared programs: 14927994 -> 14926738 (-0.01%)
   instructions in affected programs: 168850 -> 167594 (-0.74%)
   helped: 711
   HURT: 2

On SNB:

   total instructions in shared programs: 10770538 -> 10734403 (-0.34%)
   instructions in affected programs: 2702172 -> 2666037 (-1.34%)
   helped: 17818
   HURT: 0

All of the hurt shaders are either spilling slightly more or emitting
additional NOP instructions due to the SIMD16 POW workaround for
Gen8-9 combined with differences in scheduling.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Introduce barycentric layout lowering pass.

The goal is to represent barycentrics with the standard vector layout
during optimization and particularly SIMD lowering.  Instead of
emitting the barycentric layout conversions at NIR translation time,
do it later as a lowering pass.  For the moment this is only applied
to PI messages, but we'll give the same treatment to LINTERP
instructions too.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Split fetch_payload_reg() into separate helper for barycentrics.

We're about to change the layout of barycentric vectors, which will
involve permuting the GRFs of barycentrics fetched from the thread
payload.  Make room for this in a function separate from the generic
fetch_payload_reg(), since the permutation will only be applicable to
barycentric vectors.  This allows simplifying fetch_payload_reg(),
since there was no need for handling multiple-component payload
registers except for barycentrics.

This causes some minor shader-db noise due to the new helper emitting
a LOAD_PAYLOAD instruction unconditionally, but it will be cleaned up
shortly.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs/gen6: Use SEL instead of bashing thread payload for unlit centroid workaround.

This prevents regressions on SNB due to the redundant MOVs lying
around in cases where fetch_payload_reg() returns a VGRF (currently
only in SIMD32 but soon in pretty much all cases).  The MOVs can't be
register-coalesced due to their source being a FIXED_GRF, and they
can't be copy-propagated either due to the unlit centroid workaround
partial writes.  They can be copy-propagated just fine into a SEL
instruction though.

On SNB this prevents the following shader-db regressions (including
SIMD32 programs) in combination with the interpolation rework part of
this series:

   total instructions in shared programs: 13996898 -> 14001982 (0.04%)
   instructions in affected programs: 197461 -> 202545 (2.57%)
   helped: 0
   HURT: 1251

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs/gen6: Generalize aligned_pairs_class to SIMD16 aligned barycentrics.

This is mainly meant to avoid shader-db regressions on SNB as we start
using VGRFs for barycentrics more frequently.  Currently the
aligned_pairs_class is only useful in SIMD8 mode, because in SIMD16
mode barycentric vectors are typically 4 GRFs.  This is not a problem
on Gen4-5, because on those platforms all VGRF allocations are
pair-aligned in SIMD16 mode.  However on Gen6 we end up using either
the fast or the slow path of LINTERP rather non-deterministically
based on the behavior of the register allocator.

Fix it by repurposing aligned_pairs_class to hold PLN-aligned
registers of whatever the natural size of a barycentric vector is in
the current dispatch width.

On SNB this prevents the following shader-db regressions (including
SIMD32 programs) in combination with the interpolation rework part of
this series:

   total instructions in shared programs: 13983257 -> 14527274 (3.89%)
   instructions in affected programs: 1766255 -> 2310272 (30.80%)
   helped: 0
   HURT: 11608

   LOST:   26
   GAINED: 13

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs/gen6: Constrain barycentric source of LINTERP during bank conflict mitigation.

This avoids regressions on SNB due to the bank conflict mitigation
pass moving a VGRF-allocated barycentric vector to a misaligned
location, which would prevent the PLN instruction from being used.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs/gen4-6: Allocate registers from aligned_pairs_class based on LINTERP use.

Previously we would hardcode fs_visitor::delta_xy barycentrics to be
allocated from aligned_pairs_class on hardware with PLN source
alignment restrictions (pre-Gen7).  Instead allocate any registers
consumed by LINTERP from aligned_pairs_class, even if some barycentric
vector had ended up in a temporary.

On SNB this prevents the following shader-db regressions (including
SIMD32 programs) in combination with the interpolation rework part of
this series:

   total instructions in shared programs: 13983257 -> 14527274 (3.89%)
   instructions in affected programs: 1766255 -> 2310272 (30.80%)
   helped: 0
   HURT: 11608

   LOST:   26
   GAINED: 13

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Allow limited copy propagation of a LOAD_PAYLOAD into another.

This is particularly useful in cases where register coalaesce is
unlikely to succeed because the LOAD_PAYLOAD isn't a plain copy --
E.g. when a LOAD_PAYLOAD is shuffling the contents of a barycentric
vector in order to transform it into the PLN layout.

This prevents the following shader-db regressions (including SIMD32
programs) in combination with the interpolation rework part of this
series.  On SKL:

   total instructions in shared programs: 18596672 -> 18976097 (2.04%)
   instructions in affected programs: 7937041 -> 8316466 (4.78%)
   helped: 39
   HURT: 67427

   LOST:   466
   GAINED: 220

On SNB:

   total instructions in shared programs: 13993866 -> 14202963 (1.49%)
   instructions in affected programs: 7611309 -> 7820406 (2.75%)
   helped: 624
   HURT: 52943

   LOST:   6
   GAINED: 18

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Add support for copy-propagating a block of multiple FIXED_GRFs.

In cases where a LOAD_PAYLOAD instruction copies a single block of
sequential GRF registers into the destination (see
is_identity_payload()), splitting the block copy into a number of ACP
entries (one for each LOAD_PAYLOAD source) is undesirable, because
that prevents copy propagation into any instructions which read
multiple components at once with the same source (the barycentric
source of the LINTERP instruction is going to be the overwhelmingly
most common example).

Technically it would also be possible to do this for VGRF sources, but
there is little benefit from that since register coalesce already
covers many of those cases -- There is no way for a block of
FIXED_GRFs to be coalesced into a VGRF though.

This prevents the following shader-db regressions (including SIMD32
programs) in combination with the interpolation rework part of this
series.  On SKL:

   total instructions in shared programs: 18595160 -> 18828562 (1.26%)
   instructions in affected programs: 13374946 -> 13608348 (1.75%)
   helped: 7
   HURT: 108977

   total spills in shared programs: 9116 -> 9106 (-0.11%)
   spills in affected programs: 404 -> 394 (-2.48%)
   helped: 7
   HURT: 9

   total fills in shared programs: 8994 -> 9176 (2.02%)
   fills in affected programs: 898 -> 1080 (20.27%)
   helped: 7
   HURT: 9

   LOST:   469
   GAINED: 220

On SNB:

   total instructions in shared programs: 13996898 -> 14096222 (0.71%)
   instructions in affected programs: 8088546 -> 8187870 (1.23%)
   helped: 2
   HURT: 66520

   total spills in shared programs: 2985 -> 2961 (-0.80%)
   spills in affected programs: 632 -> 608 (-3.80%)
   helped: 2
   HURT: 0

   total fills in shared programs: 3144 -> 3128 (-0.51%)
   fills in affected programs: 1515 -> 1499 (-1.06%)
   helped: 2
   HURT: 0

   LOST:   0
   GAINED: 4

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Add partial support for copy-propagating FIXED_GRFs.

This will be useful for eliminating redundant copies from the FS
thread payload, particularly in SIMD32 programs.  For the moment we
only allow FIXED_GRFs with identity strides in order to avoid dealing
with composing the arbitrary bidimensional strides that FIXED_GRF
regions potentially have, which are rarely used at the IR level
anyway.

This enables the following commit allowing block-propagation of
FIXED_GRF LOAD_PAYLOAD copies, and prevents the following shader-db
regressions (including SIMD32 programs) in combination with the
interpolation rework part of this series.  On ICL:

   total instructions in shared programs: 20484665 -> 20529650 (0.22%)
   instructions in affected programs: 6031235 -> 6076220 (0.75%)
   helped: 5
   HURT: 42073

   total spills in shared programs: 8748 -> 8925 (2.02%)
   spills in affected programs: 186 -> 363 (95.16%)
   helped: 5
   HURT: 9

   total fills in shared programs: 8663 -> 8960 (3.43%)
   fills in affected programs: 647 -> 944 (45.90%)
   helped: 5
   HURT: 9

On SKL:

   total instructions in shared programs: 18937442 -> 19128162 (1.01%)
   instructions in affected programs: 8378187 -> 8568907 (2.28%)
   helped: 39
   HURT: 68176

   LOST:   1
   GAINED: 4

On SNB:

   total instructions in shared programs: 14094685 -> 14243499 (1.06%)
   instructions in affected programs: 7751062 -> 7899876 (1.92%)
   helped: 623
   HURT: 53586

   LOST:   7
   GAINED: 25

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Extend copy propagation dataflow analysis to copies with FIXED_GRF source.

This involves indexing the ACP tables used internally by
fs_copy_prop_dataflow::setup_initial_values() by reg_space() instead
of register number.  Both are nearly equivalent for virtual GRFs
(barring the single bit of entropy lost in the hash), and this makes
handling FIXED_GRFs straightforward.

Because we're only going to support FIXED_GRFs for the source of a
copy, this change is only strictly necessary during the second pass
that checks for source interference, but we also apply the same change
to the first pass for consistency.

Note that this shouldn't change the behavior of the copy propagation
pass until we start inserting FIXED_GRF entries into the ACP.  Even
then FIXED_GRF writes are extremely rare so this change will hardly
ever have an effect, but they aren't completely non-existing so we
need to handle them for correctness.

No functional nor shader-db changes.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Rework fs_inst::is_copy_payload() into multiple classification helpers.

This reworks the current fs_inst::is_copy_payload() method into a
number of classification helpers with well-defined semantics.  This
will be useful later on in order to optimize LOAD_PAYLOAD instructions
more aggressively in cases where we can determine it's safe to do so.

The closest equivalent of the present fs_inst::is_copy_payload()
method is the is_coalescing_payload() helper introduced here.

No functional nor shader-db changes.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Generalize fs_reg::is_contiguous() to register files other than VGRF.

No functional nor shader-db changes.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/fs: Try to vectorize header setup in lower_load_payload().

In cases where LOAD_PAYLOAD is provided a pair of contiguous registers
as header sources, try to use a single SIMD16 instruction in order to
initialize them.  This is unlikely to affect the overall cycle count
of the shader, since the compressed instruction has twice the issue
time, except due to the reduced pressure on the instruction cache.

Main motivation is avoiding instruction-count regressions in
combination with the following copy propagation improvements, which
will allow the SIMD16 g0-1 header setup emitted for framebuffer writes
to be copy-propagated into its LOAD_PAYLOAD, leading to the emission
of two SIMD8 MOV instructions instead of a single SIMD16 MOV.

Reverting this commit on top of the copy propagation changes would
lead to the following shader-db regressions on SKL and other
platforms:

 total instructions in shared programs: 14926738 -> 14935415 (0.06%)
 instructions in affected programs: 1892445 -> 1901122 (0.46%)
 helped: 0
 HURT: 8676

Without the following copy propagation changes this doesn't have any
effect on shader-db on Gen7+, because we would typically set up the FB
write header with a separate SIMD16 MOV that isn't currently
copy-propagated into the LOAD_PAYLOAD, so the individual SIMD8 MOVs
result of LOAD_PAYLOAD lowering would get register-coalesced away
under normal circumstances.  However that wasn't the case for MRF
LOAD_PAYLOAD destinations on Gen6 and earlier, because register
coalesce only kicks in for GRFs, leaving a number of redundant SIMD8
MOVs lying around.  On SNB this leads to the following shader-db
improvements:

 total instructions in shared programs: 10770538 -> 10734681 (-0.33%)
 instructions in affected programs: 2700655 -> 2664798 (-1.33%)
 helped: 17791
 HURT: 0

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/dri: do FLUSH_VERTICES before calling flush_resource

gallium: add st_context_iface::flush_resource to call FLUSH_VERTICES

anv: enable VK_KHR_swapchain_mutable_format

Enable new tests in dEQP-VK.image.swapchain_mutable.*

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

vulkan/wsi: Implement VK_KHR_swapchain_mutable_format

This is only the core WSI code for the extension.  It adds the image
format list and the flags to vkCreateImage as well as handling things
properly in the modifier queries.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

vulkan/wsi: Filter modifiers with ImageFormatProperties

Just because a modifier is returned for the given format, that doesn't
mean it works with all usages and flags.  We need to filter the list by
calling vkGetPhysicalDeviceImageFormatProperties2.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

vulkan/wsi: Use the interface from the real modifiers extension

The anv implementation still isn't quite complete, but we can at least
start using the structs from the real extension.

v2: Fix circular pNext list (Lionel)

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

vulkan/wsi: Move the ImageCreateInfo higher up

Future changes will be easier if we can modify it based on whether or
not we're using modifiers.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

anv: Support modifiers in GetImageFormatProperties2

Images with modifiers come with restrictions:

 1. They have to be simple 2D images right now

 2. They need to have a sensible format (not compressed, multi-plane, or
    non-power-of-two)

 3. If a CCS modifier is being requested, they have to actually support
    CCS_E and be CCS-compatible with any other formats the client may
    wish to use for image views.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

anv: Drop some VK_IMAGE_TILING_OPTIMAL checks

The DRM format modifiers extension adds a TILING_DRM_FORMAT_MODIFIER
which will be used for modifiers so we can no longer use OPTIMAL to
indicate tiled inside the driver.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3434>

aco: print assembly with CLRXdisasm for GFX6-GFX7 if found on the system

LLVM only supports GFX8+. Using CLRXdisasm works most of the time,
so it's useful to add support for it.

Original patch by Daniel Schürmann.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3439>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3439>

vulkan/wsi: disable the hardware cursor

Ensure the hardware cursor is disabled when we set the mode for a
VkDisplayKHR object. The extension doesn't expose any mechanisms to
program the hardware cursor, so we need to ensure it is hidden.

Currently, it seems like X is responsible for disabling the cursor
before handing over the lease. But that seems a little frail, and we
should be disabling the cursor ourselves so it works correctly
independently of how the lease was prepared for us.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1922>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1922>

gallium/swr: Disable showing detected arch message.

When swr driver is in use it print detected architecture
message to std::err. It can be harmfull when swr is using
in multinodes environments.
It can be enabled setting env var SWR_PRINT_INFO to 1.

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

aco: fix emitting slc for MUBUF instructions on GFX6-GFX7

Same as GFX10, only GFX8/GFX9 moved that bit near the opcode.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3437>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3437>

panfrost/midgard: Fix swizzle for store instructions

The current logic considers that the nir_intrinsic_component(store_intr)
encodes the source components start, but it actually encodes the
destination one. Source component offset adjustment is taken care of in
install_registers_instr(), when offset_swizzle() is called.

This fixes dEQP-GLES2.functional.shaders.random.all_features.fragment.45
when PAN_MESA_DEBUG=deqp (looks like exposing GLES3 features has an
impact on the varyings layout).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3429>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3429>

docs: do not double-close link tag

Fixes: f8148d0cc17 "docs: remove mailing list as way of submitting patches"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: remove double-closed definition-list

Fixes: bc17ac58661 "docs: add documentation for building with meson"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: move paragraph closing tag

The pre-tag right before is a block-level tag, which means it implicitly
terminates the paragraph. So there's no paragraph to close after this.
Instead, move the paragraph-closing before the pre-tag, to explicitly
close the paragraph.

Fixes: 41b3eb08d9f "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tags instead of pre-tags

Similar to the previous two commits, it seems more appropriate to use
code-tags here than pre-tag.

Fixes: 9af6c38deff "docs: Add use of Closes: tag for closing gitlab issues"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tags instead of pre-tags

Similar to the previous commit, code-tags seems more appropriate than
pre-tags here. So let's change it.

Fixes: ca0c1e69cab "docs: update releasing process to use new scripts and gitlab"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: use code-tag instead of pre-tag

It's unlikely the author meant to use <pre>-here, as that starts a whole
new block. Instead, the inline code-tag seems more appropriate here.

Fixes: 41b3eb08d9f "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: open paragraph before closing it

Fixes: 44c5e634a5c "docs: update meson docs for windows"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: fix paragraphs

Paragraphs are terminated by pre-tags, so the latter one closes a new,
empty one. Let's split the paragraph in two around the pre-tag instead.

Fixes: c0dfe8c6dfd "docs: do not use div for line-breaking"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

docs: fix typo in html tag name

Fixes: 5d11a828e10 "docs: update install docs for meson"
Acked-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3431>

util: call bind_sampler_states before setting sampler_views

Fixes the following valgrind error:

    Invalid read of size 16
       at 0x28F458A1: si_set_sampler_view_desc (in radeonsi_drv_video.so)
       by 0x28F4657E: si_set_sampler_views (in radeonsi_drv_video.so)
       by 0x28D62BF5: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)
     Address 0x18142a10 is 0 bytes inside a block of size 48 free'd
       at 0x48369AB: free (vg_replace_malloc.c:540)
       by 0x28D62D51: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)
     Block was alloc'd at
       at 0x4837B65: calloc (vg_replace_malloc.c:762)
       by 0x28EFB2EC: si_create_sampler_state (in radeonsi_drv_video.so)
       by 0x28D62C30: util_compute_blit (in radeonsi_drv_video.so)
       by 0x28D3A944: vlVaHandleVAProcPipelineParameterBufferType (in radeonsi_drv_video.so)
       by 0x28D34EE1: vlVaRenderPicture (in radeonsi_drv_video.so)
       by 0x4B2582B: vaRenderPicture (in libva.so.2.500.0)

Fixes: 69430d7e59e ("va: use a compute shader for the blit")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2321
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3428>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3428>

nir: Fix printing of ~0 .locations.

I kept wondering what "429" meant in variable declarations, when it was
just a truncated ~0 snprintf.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3423>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3423>

meson: use github URL for wraps instead of completely unreliable wrapdb

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3391>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3391>

docs: Update release calendar for 20.0

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3417>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3417>

lima: Fix alpha blending

Introduce separate helper functions to set the blendfactor bits.

Lima uses bits 0-2 for the type, bit 3 sets the inverted function
and bit 4 is set if alpha is used.
alpha_src_factor and alpha_dst_factor don't need the alpha bit, so
they are masked with 0xf. There is only place for 4 bits anyway.
If alpha_src_factor is PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE, we need
to change it to PIPE_BLENDFACTOR_ONE first.
This is exactly what the blob does and we pass all
dEQP-GLES2.functional.fragment_ops.blend.* tests now.
Better than the blob btw...

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3411>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3411>

aco: ignore parallelcopies to the same register on jump threading

The more conservative lowering to CSSA inserts unnecessary parallelcopies
which might get coalesced and can be ignored on jump threading.

v2: outline is_empty_block() check.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: handle phi affinities transitively through parallelcopies

This can coalesce most unnecessarily inserted parallelcopies
from lowering to CSSA.

v2: refactor loop a bit to make it more efficient and readable.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: rework lower_to_cssa()

This patch changes lower_to_cssa to be much more conservative
about assumptions which phi operands might interfere.
Previously, this pass wasn't exhaustive and could miss some corner cases.

v2: remove optimizations to find better insertion points as it's hard
to guarantee that they are always correct and have overall no benefit.

Fixes: 0b8216b2cdbcaccfd2bd1a65be6b8ac5654e3067 ('aco: Lower to CSSA')
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3385>

aco: implement stream output with vec3 on GFX6

GFX6 doesn't support vec3.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

aco: do not combine additions of DS instructions on GFX6

The offset field doesn't work as expected on GFX6.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

aco: do not select 96-bit/128-bit variants for ds_read/ds_write on GFX6

Only GFX7 and later support large ds_read/ds_write.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3412>

intel/perf: report query split for mdapi

Also forgotten in the initial implementation.

v2: Report begin timestamp scaled by the timestamp frequency (Windows
    behavior)

v3: Rename split to disjoint to match GL terminology (Tapani)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>

intel/perf: expose timestamp begin for mdapi

This was forgotten in the initial implementation.

v2: ensure the value is written for both GL & Vulkan queries

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3112>

anv: set depth stall enabled when depth flush enabled on gen12

This implements HW workaround #1409600907 for anv driver.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>

iris: set depth stall enabled when depth flush enabled on gen12

This implements HW workaround #1409600907 for iris driver.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3378>

anv: implement another workaround for non pipelined states

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

iris: implement another workaround for non pipelined states

v2: add comment (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>

iris: handle new PIPE_CONTROL field

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3408>