Jason Ekstrand [Fri, 3 Nov 2017 21:13:08 +0000 (14:13 -0700)]
i965: Be more clever about setting up our viewport clip
Before, we were trusting in the hardware to take the intersection
of the viewport clip with the drawing rectangle. Unfortunately,
3DSTATE_DRAWING_RECTANGLE is fairly expensive because it implicitly
does a full pipeline stall. If we're a bit more careful with our
viewport clipping, we can just re-emit it once at context creation
time.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 28 Feb 2018 21:25:21 +0000 (13:25 -0800)]
intel/compiler: Re-add .vs_inputs_dual_locations = true
Looks like a rebase mistake.
Fixes: 89fe5190a256 ("intel/compiler: Lower flrp32 on Gen11+")
Dave Airlie [Wed, 28 Feb 2018 06:42:53 +0000 (06:42 +0000)]
r600/shader: when using images always load thread id gpr at start (v2)
The delayed loading code was fail if we had control flow.
This fixes:
tests/spec/arb_shader_image_load_store/execution/image_checkerboard.shader_test
v2: don't use temp_reg before setting temp_reg up.
Tested-by: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 28 Feb 2018 20:15:30 +0000 (20:15 +0000)]
r600: fix whitespace in recent 1d texture commit.
trivial fix.
Matt Turner [Mon, 29 Jan 2018 23:52:39 +0000 (15:52 -0800)]
intel/compiler: Add ICL to test_eu_validate.cpp
With the Align16 tests now disabled, we can run the rest of the tests in
ICL mode (and see them pass!)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Thu, 8 Feb 2018 18:23:11 +0000 (10:23 -0800)]
intel/compiler: Disable Align16 tests on Gen11+
Align16 is no more.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 23:43:05 +0000 (16:43 -0700)]
intel/compiler: Add instruction compaction support on Gen11
Gen11 only differs from SKL+ in that it uses a new datatype index table.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 23:14:11 +0000 (16:14 -0700)]
intel/compiler: Mark line, pln, and lrp as removed on Gen11+
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 23:20:41 +0000 (16:20 -0700)]
intel/compiler: Lower flrp32 on Gen11+
The LRP instruction is no more.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 16 Jun 2017 00:29:16 +0000 (17:29 -0700)]
intel/compiler/fs: Implement ddy without using align16 for Gen11+
Align16 is no more. We previously generated an align16 ADD instruction
to calculate DDY:
add(16) g25<1>F -g23<4>.xyxyF g23<4>.zwzwF { align16 1H };
Without align16, we now implement it as:
add(4) g25<1>F -g23<0,2,1>F g23.2<0,2,1>F { align1 1N };
add(4) g25.4<1>F -g23.4<0,2,1>F g23.6<0,2,1>F { align1 1N };
add(4) g26<1>F -g24<0,2,1>F g24.2<0,2,1>F { align1 1N };
add(4) g26.4<1>F -g24.4<0,2,1>F g24.6<0,2,1>F { align1 1N };
where only the first two instructions are needed in SIMD8 mode.
Note: an earlier version of the patch implemented this in two
instructions in SIMD16:
add(8) g25<2>F -g23<4,2,0>F g23.2<4,2,0>F { align1 1N };
add(8) g25.1<2>F -g23.1<4,2,0>F g23.3<4,2,0>F { align1 1N };
but I realized that the channel enable bits will not be correct. If we
knew we were under uniform control flow, we could emit only those two
instructions however.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 16 Jun 2017 00:20:29 +0000 (17:20 -0700)]
intel/compiler/fs: Simplify ddx/ddy code generation
The brw_reg() constructor just obfuscates things here, in my opinion.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Thu, 15 Jun 2017 22:41:40 +0000 (15:41 -0700)]
intel/compiler/fs: Pass fs_inst to generate_ddx/ddy instead of opcode
In a future patch, generate_ddy will want to inspect inst->exec_size.
Change generate_ddx as well for consistency.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Mon, 23 Oct 2017 17:44:39 +0000 (10:44 -0700)]
intel/compiler/fs: Don't generate integer DWord multiply on Gen11
Like CHV et al., Gen11 does not support 32x32 -> 32/64-bit integer
multiplies.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 21:47:19 +0000 (14:47 -0700)]
intel/compiler/fs: Implement FS_OPCODE_LINTERP with MADs on Gen11+
The PLN instruction is no more. Its functionality is now implemented
using two MAD instructions with the new native-float type. Instead of
pln(16) r20.0<1>:F r10.4<0;1,0>:F r4.0<8;8,1>:F
we now have
mad(8) acc0<1>:NF r10.7<0;1,0>:F r4.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r20.0<1>:F acc0<8;8,1>:NF r5.0<8;8,1>:F r10.5<0;1,0>:F
mad(8) acc0<1>:NF r10.7<0;1,0>:F r6.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r21.0<1>:F acc0<8;8,1>:NF r7.0<8;8,1>:F r10.5<0;1,0>:F
... and in the case of SIMD8 only the first pair of MAD instructions is
used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 18:06:45 +0000 (11:06 -0700)]
intel/compiler/fs: Return multiple_instructions_emitted from generate_linterp
If multiple instructions are emitted, special handling of things like
conditional mod and NoDDClr/NoDDChk need to be performed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 21:47:19 +0000 (14:47 -0700)]
intel/compiler/fs: Fix application of cmod and saturate to LINE/MAC pair
This isn't technically broken, but the next patch will make this
function report whether it generated multiple instructions, and that
information will be used to disable the application of conditional mod
by the generic code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Wed, 14 Jun 2017 18:03:19 +0000 (11:03 -0700)]
intel/compiler: Add Gen11+ native float type
This new type exposes the additional precision offered by the
accumulator register and will be used in the next patch to implement the
functionality of the PLN instruction using a pair of MAD instructions.
One weird thing to note: align1 ternary instructions may only have an
accumulator in the dst or src1 normally, but when src0's type is :NF
the accumulator is read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Fri, 25 Aug 2017 16:50:29 +0000 (09:50 -0700)]
intel/compiler: Add Gen11 register types
The hardware register types' encodings have changed on Gen11. Good thing
we have that superfluous looking brw_reg_type abstraction lying around!
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Mon, 11 Dec 2017 21:59:13 +0000 (13:59 -0800)]
intel: Disable 64-bit extensions on platforms without 64-bit types
Gen11 does not support DF, Q, UQ types in hardware. As a result, we have
to disable some GL extensions until they can be reimplemented.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Anuj Phogat [Wed, 10 May 2017 22:26:51 +0000 (15:26 -0700)]
intel: Add icl pci id for INTEL_DEVID_OVERRIDE
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Matt Turner [Mon, 26 Feb 2018 22:25:17 +0000 (14:25 -0800)]
i965: Warn about preliminary support for Gen11
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Anuj Phogat [Tue, 14 Mar 2017 21:43:34 +0000 (14:43 -0700)]
intel: Add a preliminary device for Ice Lake
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Anuj Phogat <anuj.phogat@intel.com>
Tapani Pälli [Wed, 28 Feb 2018 16:54:24 +0000 (18:54 +0200)]
anv: remove anv_gem_set_context_priority helper
anv_gem_set_context_param is to be used directly instead!
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
George Kyriazis [Tue, 20 Feb 2018 06:07:57 +0000 (00:07 -0600)]
swr/rast: revert clip distance precision
Fixes piglit tests that broke with
8a64593bde
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Wed, 7 Feb 2018 18:24:23 +0000 (12:24 -0600)]
swr/rast: Faster frustum prim culling
Fix clipper validMask setting. We don't need to run frustum rejected
primitives through the clipper. Perform frustum culling with only
frustum clip codes. Guardband clip codes cannot be used because they
overlap frustum codes.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Wed, 14 Feb 2018 07:13:13 +0000 (01:13 -0600)]
swr/rast: Consolidate TRANSLATE_ADDRESS
Translate is now part of an overloaded LOAD call which required a change to
the code gen to skip the load functions in order to handle them manually
to make them virtual.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Wed, 14 Feb 2018 01:22:03 +0000 (19:22 -0600)]
swr/rast: Code generation cleanup
Generate more compact code from gen_llvm.hpp.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Tue, 13 Feb 2018 23:38:55 +0000 (17:38 -0600)]
swr/rast: Remove draw type from event definitions
- Have the draw type sent to DrawInfoEvent in handlers created in
archrast.cpp. The draw type no longer needs to be sent during during
AR_API_EVENT() call in api.cpp.
- Remove draw type from event defintions in events_private.proto, no
longer needed
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Tue, 27 Feb 2018 17:34:45 +0000 (11:34 -0600)]
swr/rast: whitespace change
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
George Kyriazis [Fri, 16 Feb 2018 17:14:50 +0000 (11:14 -0600)]
swr/rast: Fix index buffer overfetch issue for non-indexed draws
Populate pLastIndex, even for the non-indexed case. An zero pLastIndex
can cause the index offsets inside the fetcher to have non-sensical values
that can be either very large positive or very large negative numbers.
Reviewed-By: Bruce Cherniak <bruce.cherniak@intel.com>
Roland Scheidegger [Wed, 28 Feb 2018 03:28:29 +0000 (04:28 +0100)]
softpipe: don't iterate through PIPE_MAX_SHADER_SAMPLER_VIEWS
We were setting view to NULL if the iteration was larger than i.
But in fact if the view is NULL the code did nothing anyway...
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Roland Scheidegger [Wed, 28 Feb 2018 02:01:23 +0000 (03:01 +0100)]
cso: don't cycle through PIPE_MAX_SHADER_SAMPLER_VIEWS on context destroy
There's no point, we know the highest non-null one.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Roland Scheidegger [Sun, 25 Feb 2018 03:26:37 +0000 (04:26 +0100)]
draw: don't needlessly iterate through all sampler view slots
We already stored the highest (potentially) used number.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tapani Pälli [Tue, 23 Jan 2018 12:01:00 +0000 (14:01 +0200)]
anv: implement VK_EXT_global_priority extension
v2: add ANV_CONTEXT_REALTIME_PRIORITY (Chris)
use unreachable with unknown priority (Samuel)
v3: add stubs in gem_stubs.c (Emil)
use priority defines from gen_defines.h
v4: cleanup, add anv_gem_set_context_param (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (v2)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v3)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tapani Pälli [Mon, 22 Jan 2018 06:22:53 +0000 (08:22 +0200)]
i965: use context priority definitions from gen_defines.h
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tapani Pälli [Mon, 22 Jan 2018 06:17:50 +0000 (08:17 +0200)]
intel: add new common header gen_defines.h
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Christian König [Mon, 26 Feb 2018 13:13:28 +0000 (14:13 +0100)]
winsys/amdgpu: request high addresses
We now have hopefully fixed all bugs regarding high addresses on Vega10 and
Raven. Start to use the high range to make room for SVM in the low
range.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Samuel Pitoiset [Mon, 26 Feb 2018 11:14:35 +0000 (12:14 +0100)]
ac/shader: move scanning some info about input PS declarations
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Samuel Iglesias Gonsálvez [Mon, 29 Jan 2018 12:46:28 +0000 (13:46 +0100)]
glsl/linker: fix bug when checking precision qualifier
According to GLSL ES 3.2 spec, see table in 9.2.1 "Linked Shaders"
section, the precision qualifier should match for uniform variables.
This also applies to previous GLSL ES 3.x specs.
This 'if' checks the condition for uniform variables, while for UBOs
it is checked in link_interface_blocks.cpp.
Fixes: b50b82b8a553
("glsl/es31: precision qualifier doesn't need to match in shader interface block members")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Samuel Iglesias Gonsálvez [Mon, 26 Feb 2018 07:26:24 +0000 (08:26 +0100)]
anv: set maxResourceSize to the respective value for each generation
v2:
- Add the proper values to gen9+ (Jason)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Dave Airlie [Wed, 28 Feb 2018 04:37:45 +0000 (04:37 +0000)]
r600: partly revert disabling tiling for 1d texture.
Previously we had a check for 1d of narrow 2D textures, however
narrow 2d textures caused gpu hangs, but it was correct for 1d
textures.
This fixes a bunch of 1D image piglits for me.
Fixes: 7b8e1c089d (r600/texture: drop lowering 1d/2d images to linear.)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Timothy Arceri [Wed, 28 Feb 2018 03:33:55 +0000 (14:33 +1100)]
nir: fix interger divide by zero crash during constant folding
From the GLSL 4.60 spec Section 5.9 (Expressions):
"Dividing by zero does not cause an exception but does result in
an unspecified value."
Fixes: 89285e4d47a6 "nir: add new constant folding infrastructure"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105271
Ilia Mirkin [Tue, 27 Feb 2018 00:31:12 +0000 (19:31 -0500)]
st/mesa: ensure that images don't try to reference non-existent levels
Ideally the st_finalize_texture call would take care of that, but it
doesn't seem to with KHR-GL45.shader_image_size.advanced-nonMS-*. This
assertion makes sure that no such values are passed to the driver.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Dave Airlie [Tue, 27 Feb 2018 23:53:51 +0000 (09:53 +1000)]
ac/radv: move load base vertex abi setup to vertex shader.
This was segfaulting:
dEQP-VK.memory.pipeline_barrier.host_write_index_buffer.1024
Fixes: 8de6f797070 (ac/radeonsi: add load_base_vertex() to the abi)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 27 Feb 2018 02:34:54 +0000 (12:34 +1000)]
ac/shader: fix vertex input with components.
This fixes:
dEQP-VK.glsl.440.linkage.varying.component.*
Fixes: 1c57a6da5e3 (ac/shader: scan vertex inputs usage mask)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 27 Feb 2018 04:31:31 +0000 (14:31 +1000)]
radv: remove device pointer from buffer.
This is never used.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Timothy Arceri [Tue, 27 Feb 2018 08:19:21 +0000 (19:19 +1100)]
nir: add lower_ldexp to nir compiler options
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Tue, 27 Feb 2018 08:37:59 +0000 (19:37 +1100)]
ac: implement nir_op_ldexp
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Tue, 27 Feb 2018 05:08:40 +0000 (16:08 +1100)]
ac: fix nir_op_fdd{x,y} handling
radeonsi, i965 and anv all treat fdd{x,y} opcodes the same as
fdd{x,y}_coarse by default. The SPIR-V spec lets the implementation
decide how it should be handled and radv was previously going
for the higher quality option. Here we change the shared amd
code to match how nir_op_fdd{x,y} is expected to be handled
by the other NIR drivers.
Fixes piglit test:
./bin/arb_shader_texture_lod-texgrad -auto
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Mon, 26 Feb 2018 11:11:53 +0000 (22:11 +1100)]
ac/radeonsi: add load_base_vertex() to the abi
Fixes the following piglit tests:
./bin/arb_shader_draw_parameters-basevertex basevertex -auto -fbo
./bin/arb_shader_draw_parameters-basevertex basevertex-baseinstance -auto -fbo
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Mon, 26 Feb 2018 10:59:43 +0000 (21:59 +1100)]
radeonsi: create get_base_vertex() helper
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Tue, 27 Feb 2018 01:48:11 +0000 (12:48 +1100)]
radeonsi/nir: disable vertex_id_zero_based lowering
The lowering is incompatible with how the radeonsi backend works.
Fixes piglit test:
./bin/arb_shader_draw_parameters-basevertex vertexid-zerobased -auto
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Tue, 27 Feb 2018 01:47:00 +0000 (12:47 +1100)]
ac: add support for handling nir_intrinsic_load_vertex_id
This will be used by radeonsi.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Mon, 26 Feb 2018 05:12:41 +0000 (16:12 +1100)]
ac: fix f2b and i2b for doubles
Without this llvm was asserting in debug builds.
V2: use LLVMConstNull()
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Francisco Jerez [Fri, 26 Jan 2018 19:48:02 +0000 (11:48 -0800)]
intel/ir: Fix invalid type aliasing with undefined behavior in test_eu_compact.
test_fuzz_compact_instruction() was attempting to modify the uint64_t
data array of a brw_inst through a pointer to uint32_t, which has
undefined behavior. This was causing the test_eu_compact unit test to
fail mysteriously for me on GCC 7 with some additional
harmless-looking changes I had applied to my tree, which happened to
affect the order instructions are emitted by GCC causing the bit
twiddling to be done after the clear_pad_bits() call which is supposed
to overwrite the same data through a pointer of different type,
leading to data corruption. A similar failure has been reported by
Vinson Lee on the master branch built with GCC 8.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105052
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Francisco Jerez [Sun, 25 Feb 2018 02:37:34 +0000 (18:37 -0800)]
util/bitset: Make C++ wrapper trivially constructible.
In order to fix a build failure on compilers not implementing
unrestricted unions, which is a C++11 feature.
v2: Provide signed integer comparison and assignment operators instead
of BITSET_WORD ones to avoid spurious ambiguity warnings on
comparisons with a signed integer literal.
Fixes: ba79a90fb52e1e81fb "glsl: Switch ast_type_qualifier to a 128-bit bitset."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105238
Tested-by: Roland Scheidegger <sroland@vmware.com>
Tested-By: George Kyriazis <george.kyriazis@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Jordan Justen [Sat, 10 Feb 2018 03:06:43 +0000 (19:06 -0800)]
intel/tools: Use gen_device_name_to_pci_device_id in aubinator
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Jordan Justen [Sat, 10 Feb 2018 03:06:12 +0000 (19:06 -0800)]
intel/common: Add gen_device_name_to_pci_device_id
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Jordan Justen [Sat, 10 Feb 2018 02:38:28 +0000 (18:38 -0800)]
intel/vulkan: Support INTEL_DEVID_OVERRIDE environment variable
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Jordan Justen [Sat, 10 Feb 2018 02:48:18 +0000 (18:48 -0800)]
i965: Use gen_get_pci_device_id_override
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Jordan Justen [Sat, 10 Feb 2018 01:12:05 +0000 (17:12 -0800)]
intel/common: Add gen_get_pci_device_id_override
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Jordan Justen [Sat, 10 Feb 2018 02:36:43 +0000 (18:36 -0800)]
intel/vulkan: Support INTEL_NO_HW environment variable
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Harish Krupo [Tue, 27 Feb 2018 06:44:00 +0000 (12:14 +0530)]
android: fix source files path for libmesa_anv_gen11
Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Eric Engestrom [Fri, 23 Feb 2018 17:08:45 +0000 (17:08 +0000)]
meson: avoid changing types for the dri3 option
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Eric Engestrom [Fri, 23 Feb 2018 17:08:20 +0000 (17:08 +0000)]
meson: simplify the gbm option code, and avoid changing types
v2: drop gallium comment (Dylan)
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Samuel Pitoiset [Mon, 26 Feb 2018 13:05:05 +0000 (14:05 +0100)]
ac/nir: clean up a hack about rounding 2nd coord component
It's basically just the opposite, and it only makes sense to
round the layer for 2D texture arrays.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Ilia Mirkin [Mon, 5 Feb 2018 05:15:58 +0000 (00:15 -0500)]
nvc0: collapse output slots to have adjacent registers
The hardware skips over unallocated slots, so we have to make sure those
registers are packed together.
Fixes KHR-GL45.enhanced_layouts.fragment_data_location_api
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>
Dave Airlie [Mon, 26 Feb 2018 20:51:55 +0000 (20:51 +0000)]
radv: expose async compute on SI
It looks like we had all the pieces in place for this,
just never tested it and turned it on.
I don't see any CTS regressions and the computeshader
demo runs.
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Sun, 25 Feb 2018 23:23:45 +0000 (23:23 +0000)]
radv: merge tess rings into a single bo
Inspired by a passing commit to radeonsi.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Emil Velikov [Tue, 27 Feb 2018 00:32:14 +0000 (00:32 +0000)]
docs: update calendar, add news and link release notes to 17.3.6
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Emil Velikov [Tue, 27 Feb 2018 00:28:54 +0000 (00:28 +0000)]
docs: add sha256 checksums for 17.3.6
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit
b00880973eeab5d29413eb8a27707f62904723ea)
Emil Velikov [Tue, 27 Feb 2018 00:18:33 +0000 (00:18 +0000)]
docs: add release notes for 17.3.6
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit
b3e5a3f35bfe5b69758ceb90f93fffbee01a5682)
Dylan Baker [Mon, 26 Feb 2018 16:43:54 +0000 (08:43 -0800)]
meson: fix building without GL
libgl will be undefined _glx, so move that check inside the
`if with_glx != 'disabled'` block.
v2: - Simplify commit message (Eric, Emil)
Fixes: 5c460337fd9c109 ("meson: Fix GL and EGL pkg-config files with glvnd")
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
CC: Daniel Stone <daniels@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Untested-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Lionel Landwerlin [Thu, 22 Feb 2018 13:41:10 +0000 (13:41 +0000)]
intel: aubinator_error_decode: fix segfault on missing register
Some register might be missing in our genxmls. Don't try to decode
them.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Engestrom [Fri, 23 Feb 2018 17:02:08 +0000 (17:02 +0000)]
*-symbol-check: use correct `nm` path when cross-compiling
Inspired-by: a similar patch for libdrm by Heiko Becker
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Karol Herbst [Tue, 5 Dec 2017 10:09:54 +0000 (11:09 +0100)]
nvir/gm107: consider FILE_FLAGS dependencies in SchedDataCalculatorGM107
currently while insterting barriers, writes and reads to FILE_FLAGS aren't
considered. This can lead to WaR hazards in some situations.
With the previous commit fixes shaders with intstructions like this:
mad u32 $r2 $r4 $r11 $r2
mad u32 { $r5 $c0 } $r4 $r10 $r6
mad (SUBOP:1) u32 $r3 $r4 $r10 $r2 $c0
Affects OpenCL CTS tests on Maxwell+:
basic/test_basic intmath_long
basic/test_basic intmath_long2
basic/test_basic intmath_long4
v2: only put barriers on instructions which actually read flags
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Karol Herbst [Tue, 5 Dec 2017 09:32:25 +0000 (10:32 +0100)]
nvir/gm107: iterate over all defs in SchedDataCalculatorGM107::findFirstUse
In the sched data calculator we have to track first use of defs by iterating
over all defs of an instruction, not just the first one.
v2: fix minGRP and maxGRP values
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Samuel Pitoiset [Fri, 23 Feb 2018 13:21:06 +0000 (14:21 +0100)]
ac/nir: use ordered float comparisons except for not equal
Original patch from Timothy Arceri, I have just fixed the
not equal case locally.
This fixes one important rendering issue in Wolfenstein 2
(the cutscene transition issue).
RadeonSI uses the same ordered comparisons, so I guess that
what we should do as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104302
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104905
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Mauro Rossi [Sun, 4 Feb 2018 21:57:11 +0000 (22:57 +0100)]
android: vulkan/util: add dependency on libnativewindow for O and later
Similar to
90dd6e5 ("Android: egl: add dependency on libnativewindow")
Fixes the following building error:
In file included from out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_vulkan_util_intermediates/util/vk_enum_to_str.c:26:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Mauro Rossi [Mon, 26 Feb 2018 12:42:47 +0000 (14:42 +0200)]
android: anv: add dependency on libnativewindow for O and later
Similar to
90dd6e5 ("Android: egl: add dependency on libnativewindow")
Fixes the following building errors:
In file included from external/mesa/src/intel/vulkan/gen7_cmd_buffer.c:30:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
...
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Mauro Rossi [Sun, 4 Feb 2018 21:57:09 +0000 (22:57 +0100)]
android: anv/extensions: fix generated sources build
Building rules are aligned to automake ones
The correct script to build anv_extensions.{c,h} is anv_extensions_gen.py
Generation rules for anv_extensions.c requires --out-c option
Generation rules for anv_extensions.h were missing
Necessary include paths are added to avoid following build errors:
cp: cannot stat '.../gen/STATIC_LIBRARIES/libmesa_vulkan_common_intermediates/vulkan/anv_extensions.c':
No such file or directory
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
In file included from external/mesa/src/intel/vulkan/anv_batch_chain.c:30:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: dd088d4bec7 ("anv/extensions: Generate a header file with extension tables")
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Marek Olšák [Thu, 8 Feb 2018 16:26:16 +0000 (17:26 +0100)]
radeonsi: remove 2 unused user SGPRs from merged TES-GS with 32-bit pointers
The effect of the last 13 commits on user SGPR counts:
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sun, 8 Oct 2017 17:38:37 +0000 (19:38 +0200)]
radeonsi: make SI_SGPR_VERTEX_BUFFERS the last user SGPR input
so that it can be removed and replaced with inline VBO descriptors,
and the pointer can be packed in unused bits of VBO descriptors.
This also removes the pointer from merged TES-GS where it's useless.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 7 Feb 2018 00:11:10 +0000 (01:11 +0100)]
radeonsi: set correct num_input_sgprs for VS prolog in merged shaders
We need to take num_input_sgprs from VS, not the second shader.
No apps suffered from this.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Wed, 7 Feb 2018 00:09:32 +0000 (01:09 +0100)]
radeonsi: allow fewer input SGPRs in 2nd shader of merged shaders
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Marek Olšák [Sat, 3 Feb 2018 15:10:25 +0000 (16:10 +0100)]
radeonsi: don't use struct si_descriptors for vertex buffer descriptors
VBO descriptor code will change a lot one day.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Daniel Stone [Thu, 22 Feb 2018 09:22:36 +0000 (09:22 +0000)]
build: Move wayland-scanner check into platform
Also only check for wayland-scanner if building for the Wayland
platform.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
Daniel Stone [Thu, 22 Feb 2018 09:21:00 +0000 (09:21 +0000)]
build: Move wayland-protocols check into platform
In line with wayland-client and wayland-server, move the check for
wayland-protocols into the wayland platform branch.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
Daniel Stone [Fri, 23 Feb 2018 11:15:11 +0000 (11:15 +0000)]
vulkan/wsi/wayland: Move Wayland protocol from BUILT_SOURCES
autotools wants to have the BUILT_SOURCES ready as soon as it enters the
directory, even if they are not used. This meant the build failed if
wayland-protocols was not available on the system, even if it was not
enabled.
As BUILT_SOURCES cannot be used in a conditional (cf.
166852ee957f), do
the same thing as EGL and manually encode the dependencies in the
Makefile.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211
Dave Airlie [Mon, 26 Feb 2018 01:05:45 +0000 (11:05 +1000)]
r600: fix tgsi clock last setting
On cayman this was hitting an assert later, which probably wasn't
see on non-cayman due to having the t slot.
Fixes: 9041730d1 (r600: add support for ARB_shader_clock.)
Dave Airlie [Mon, 26 Feb 2018 01:05:26 +0000 (11:05 +1000)]
r600: add time lo/hi debugging output.
This just adds the these to the debug prints.
Timothy Arceri [Fri, 23 Feb 2018 06:00:01 +0000 (17:00 +1100)]
radeonsi/nir: enable lowering of fpow
Lowering fpow in NIR rather than LLVM can be beneficial.
Polaris results:
Totals from affected shaders:
SGPRS: 124928 -> 124896 (-0.03 %)
VGPRS: 68616 -> 68332 (-0.41 %)
Spilled SGPRs: 394 -> 413 (4.82 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size:
3668912 ->
3658368 (-0.29 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 18575 -> 18593 (0.10 %)
Wait states: 0 -> 0 (0.00 %)
Fixes: d6b753920677 "ac/nir: remove emission of nir_op_fpow"
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Fri, 23 Feb 2018 05:42:04 +0000 (16:42 +1100)]
ac: make use of ac_get_llvm_num_components() helper
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Timothy Arceri [Fri, 23 Feb 2018 02:46:27 +0000 (13:46 +1100)]
gallium/tgsi: remove is_msaa_sampler array from tgsi_shader_info
Seems to have not been used since
16be87c90429
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Timothy Arceri [Mon, 26 Feb 2018 00:36:49 +0000 (11:36 +1100)]
radeonsi/nir: fix loading of doubles for tess varyings
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Timothy Arceri [Mon, 26 Feb 2018 00:36:11 +0000 (11:36 +1100)]
radeonsi/nir: fix lds store in tcs outputs handling
We were ignoring the channel offset.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Gert Wollny [Sat, 24 Feb 2018 10:31:22 +0000 (11:31 +0100)]
r600: Take ALU_EXTENDED into account when evaluating jump offsets
ALU_EXTENDED needs 4 DWORDS instead of the usual 2, hence if the last ALU
clause within a IF-JUMP or ELSE branch is ALU_EXTENDED the target jump
offset needs to be adjusted accordingly.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104654
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Francisco Jerez [Sat, 24 Feb 2018 02:35:59 +0000 (18:35 -0800)]
mesa: Expose EXT_shader_framebuffer_fetch(_non_coherent) on desktop and embedded GL.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Francisco Jerez [Mon, 12 Feb 2018 23:55:13 +0000 (15:55 -0800)]
glsl: Silence warnings when reading from a framebuffer fetch output.
Framebuffer fetch outputs are implicitly initialized upon entry to the
fragment shader.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Francisco Jerez [Wed, 14 Feb 2018 19:53:49 +0000 (11:53 -0800)]
glsl: Specify framebuffer fetch coherency mode in lower_blend_equation_advanced().
This requires passing an extra argument to the lowering pass because
the KHR_blend_equation_advanced specification doesn't seem to define
any mechanism for the implementation to determine at compile-time
whether coherent blending can ever be used (not even an "#extension
KHR_blend_equation_advanced_coherent" directive seems to be required
in the shader source AFAICT).
In the long run we'll probably want to do state-dependent recompiles
based on the value of ctx->Color.BlendCoherent, but right now there
would be no benefit from that because the only driver that supports
coherent framebuffer fetch is i965 on SKL+ hardware, which are unable
to support the non-coherent path for the moment because of texture
layout issues, so framebuffer fetch coherency is always enabled for
them.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>