git.libre-soc.org Git - gem5.git/log

arch,sim: Replace setuidFunc with ignoreFunc.

The setuidFunc just ignores the call and warns about it, and that's
what ignoreFunc already does.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I7655863ed6fe200ff3ac087be3218d49c3c43061
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23194
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Convert most of the common syscalls to use the guest ABI.

A couple tricky instances were left alone for now, specifically one
place where the size of the argument is specified explicitly (the
default ABI always leaves off the size), and two places where the
arguments are variadic which is not yet supported.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I2ec19bea77d329de3575e17e9f7209f4fd871aa6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23193
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Use the Guest ABI mechanism in writeFunc.

This change only modifies the writeFunc since it's easy to test using
the hello world test programs.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ia4a7bacdb9938d9fbe4093fc6958904d6c423360
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23192
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Switch SyscallDescABI in for SyscallDesc.

This lets system calls accept arguments by putting them in their
signatures.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ieb32b8b5592d894e493466717613ff16e2a03768
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23191
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a transitional syscall ABI which defers to Process.

This change adds a transitional ABI which just falls back to the
existing Process syscall arg getters. It should be phased out once each
ISA implements its own actual ABI.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ic40bd924989f91de70bbce59fda888b79bbbfca4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23190
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Simplify the SyscallDesc tables.

By using braced initializer lists and dropping the default
unimplementedFunc implementation function, the SyscallDesc tables
become a lot less crowded, and it's now very obvious which syscalls
are implemented just by quickly visually scanning the table.

This will also make it a lot easier to change the underlying type
stored in the table without having to adjust all of the instances
within them.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I7821de74812e1c02ca4550fc9c46cc2188cf1bd0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23189
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Handle m5 op accesses directly in the mmapped IPR handlers.

The common handlers only handle the m5ops, and it takes more plumbing
to get to them than to just handle the m5ops directly from x86.

Also, centralizing the call to PseudoInst::pseudoInst prevents
specializing the ABI per-ISA.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ife9cf0d61ac87605ddc9cf9c84feebb8b23cc33a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23184
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a function for decoding the field(s) of an m5op address.

These have at one time included both a func and subfunc, although the
subfunc was unused and is now excluded.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ic35ced7a012aa72af5454768f3cbd11b431b061a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23183
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Marjan Fariborz <mfariborz@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

x86: Use the m5 op range in the system.

Don't hard code a range into the TLB.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I0ead4353672ccf6e3e51ddbb4676be3a09f1136a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23182
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch,sim: Use _m5opRange in System::allocPhysPages.

This removes the hardcoded assumption that the m5 ops live at the
address they use in x86.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: Ia551d7cf5b08f926c7756541c92a2af9bb73b88a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23181
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a typetraits style mechanism to test for VarArgs.

This family of types can be cumbersome to check for when building
ABI rules. This struct template makes that a little easier.

Change-Id: Ic3a1b8424f8ca04564f8228365371b357f33276c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23750
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Implement ARMv8.3-JSConv

This commit implements Armv8 javascript float point convertion instructions
VJVCT and FJCVTZS.

Change-Id: I1b24839daef775bbb1eb9da5f32c4bb3843e0b28
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25023
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: This commit adds Pointer Authentication feature.

+ ArmISA.py: Enabling the feature adding  QARMA algorithm as default.
+ faults.cc/faults.hh: Add PACTrapFault
+ includes/insts.isa: Adding new isa files.
+ aarch64.isa: Add decode part for PAC instructions
+ pauth.isa: Isa for PAC instructions
+ misc64.isa: PAC instructions templates
+ miscregs.cc/hh/types: New Registers for PAC Key low/high.
+ types.hh: Modification of system registers that were incomplete
            for ARMv8
+ utility.hh: Add isSecureEL2 enabled. The function is there but will
              always return false for now.
+ pauth_helpers.hh/cc: Implementation of auxiliar functions and derivates.
+ qarma.hh/cc: This functions follow ARMv8 reference pseudo code
              implementing QARMA block cipher algorithms.

Change-Id: I3095a1279204206d9a816a4fb7fc176c18f9680b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25024
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Move old quick regressions back into their original set

realview64-simple-atomic and realview64-simple-timing had been moved
to the long list by:

https://gem5-review.googlesource.com/c/public/gem5/+/22686

in order to reduce computation time.
Since the timeout has been increased on kokoro we can safely put them
back where they were

Change-Id: Ib86f02b8ef493f450509b9f826a80faaec9ef579
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25025
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Make it possible for a GuestABI to init its Position based on a TC.

It may be necessary to initialize the GuestABI Position type based on
the current state of the thread, for instance by reading the current
stack pointer.

This change makes it possible (but not mandantory) for an ABI to supply
a constructor for Position which accepts a ThreadContext * which it can
use to intiialize itself.

Change-Id: I5609b185f746368c5f9eb2a04074dcafa088f925
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23749
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Ensure unset vec reg bits are zero/false.

These bits won't be overwritten with values from IRIS, and so we should
make sure they're cleared and don't have old values or junk.

Change-Id: Ib81780ab523f00d6a4d31841d68a3d83924982a9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24327
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Implement flattened int reg reading and writing.

Because the fast models (or at least the one we've looked at) give
access to the integer registers mostly based on the current view of
those registers, it does its own flattening and prevents accessing most
of the raw storage locations without this extra level of mapping. To
store to the flattened locations, we need to unflatten the indexes and
in one case shift the mode so that we get the right values.

Some registers which have irrelevant values for fast model (the "PC"
which is actually diverted elsewhere, the zero register, microcode
registers, and the "dummy" register), and those are left out of the
mapping so that they return 0 and blow up gem5 when someone attempts to
set them.

Change-Id: Ia2d315d5ca4c8a65b17ad52beff3a366ca8b3d46
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23791
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-arm: make MicroUopSetPCCPSR SerializeAfter

Updating CPSR needs to be SerializeAfter to ensure that all following
instructions are executed with the new CPSR. Otherwise, for example,
the following instructions will access the banked registers from the
previous mode.

The missing IsSerializeAfter had the consequence that the instruction
rfe (return from exception) did not work correctly with the DerivO3CPU
model.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-303

Change-Id: I999623c0fc92cfcd4c3550b9cb34e8564a92e3e6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24943
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
(cherry picked from commit 0d665d4f9893320db4f3b5f7014a6e10c3420b69)
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25013
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

cpu: Make getIsaPtr return a BaseISA pointer.

This isolates the architecture specific ISA types a little bit, and
means that ThreadContexts don't *have* to find an architecture specific
class to return, even if they don't naturally have one lying around.

Change-Id: Ide10b5d945ec6076947b2ccdea87c86e96e40857
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25008
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch: Introduce a base class for ISA classes.

These don't have anything in them at the moment since making some ISA
methods virtual and not inlined will likely add overhead, specifically
the ones for flattening registers. Some code may need to be rearranged
to minimize that overhead before the ISA objects can be truly put
behind a generic interface.

Change-Id: Ie36a771e977535a7996fdff701ce202bb95c8c58
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25007
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>

arm: Use static_cast to get access the ARM specific ISA functions.

Change-Id: I8d237fa60c0fc17c97ed351afd0fa3c623262f0d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25006
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: AArch64 reg access HCR_EL2.E2H filter

Some AArch64 system registers report UNDEFINED behaviours if accessed
from EL2 or EL3 in a non-EL2 Host enabled (HCR_EL2.E2H == 0) environment.
Examples of these are seen in the Generic Timer system registers,
namely CNTP_CTL_EL02 or CNTKCTL_EL12.
This patch provides an ISA filter for specifying the above condition.

Change-Id: I240f9afdb000faf5d3c9274ba12bd4cc41fe8604
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24664
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: reg access permissions highest EL helper

This patch implements a helper function to filter a register access
permissions by the highest EL implemented by the system.
This filtering is convenient to follow the architecture pseudocode.

Change-Id: Iedfb2d8624c926f2f0a9326f8b1b073ea9424ab9
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24663
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Split translateFs to distinguish when MMU is on/off

This patch is splitting the big translateFs method so that it is
using different methods when the MMU is on/off

Change-Id: I198851bdbedf8a8e69730693ff87ffb9ed535ea3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24985
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch,sim: Merge initCPU into the ISA System classes.

Those classes are already ISA specific, so we can just move initCPU's
contents there and take it out of utility.hh, utility.cc, and the base
System's initState.

Change-Id: I28f0d0b50d83efe5116b0b24d20f8182a02823e7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24905
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch,sim: Merge initCPU and startupCPU.

These two functions were called in exactly one place one right after
the other, and served similar purposes.

This change merges them together, and cleans them up slightly. It also
removes checks for FullSystem, since those functions are only called
in full system to begin with.

Change-Id: I214f7d2d3f88960dccb5895c1241f61cd78716a8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24904
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim,cpu: Move the call to initCPU into System.

The call to initCPU was moved into initState in the base CPU class
since it should only really be called when starting a simulation
fresh. Otherwise checkpointed state will be loaded over the state of
the CPU anyway, so there's no reason to set up anything else.

Unfortunately that made it possible for the System level initialization
and the CPU initialization to happen out of order, effectively letting
initCPU clobber the state the System might have set up to prepare for
executing a kernel for instance.

To work around that issue, the call was moved to init which would
necessarily happen before initState, restoring the original ordering.

This change moves the change *back* into initState, but of the System
class instead of the CPU class. This makes it possible to guarantee
that OS initialization happens after initCPU since that's also done
by System subclasses, and they control when they call initCPU of the
base class.

This also slightly simmplifies when initCPU is called since we
shouldn't need to check whether a context is switched out or not. If
it's registered with the System object, then it should be in a
currently swapped in CPU.

This also puts the initCPU and startupCPU calls right next to each
other. A future change will take advantage of that and merge the
calls together.

Also, because there are already ISA specific subclasses of System
which already have specialized versions of initState, we should be
able to move the code in initCPU and startupCPU directly into those
subclasses. That will give those subclasses more flexibilty if, for
instance, they want all CPUs to start running in the BIOS like they
would on a real system, or if they want only the BSP to be active
as if the BIOS had already paused the APs before passing control to
a bootloader or OS.

This will also remove another two TheISA:: style functions, reducing
the number of global dependencies on a single ISA.

Change-Id: Ic56924660a5b575a07844a198f69a0e7fa212b52
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24903
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch,base,cpu: Add some default constructors/operators explicitly.

Having them implicitly is apparently deprecated and throws a warning
in gcc 9, breaking the build.

Change-Id: Id4e3074966d1ffc6dd1aed9397de5eea84400027
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24926
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Delete an inet.hh accessor which is unused and makes gcc 9 upset.

This accessor will return a pointer to an unaligned uint32_t. Since
it's not used and it's not clear how to fix it trivially, this change
just deletes it.

Change-Id: I08bc62276d639cc728411f3a8a23be385000ebab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24925
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Disable spurious "array-bounds" warnings for protobuf cc files.

These files are generated and so, even if they're wrong, there isn't
anything we can do about it.

Change-Id: I933057a04f09dd1c22b525a102278bbdc5fbc22b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24924
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Add a mechanism to append flags when building particular files.

This could be used to tweak settings for a particular file if it needed
special treatment. I plan to use this for protobuf files which generate
code that produce a warning in gcc 9 which turns into an error.

Change-Id: I53e2dac48cd68f0cc8ad9031d8484c5036d6e4a6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24923
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: allow fs.py and fs_bigLITTLE.py to work without M5_PATH

The requirement to have an environment variable exported to run a program
is not common, and many new users trip up on it.

Before this commit, M5_PATH was a requirement to run those scripts, or
else simulation would fail with:

IOError: Can't find a path to system files.

After this patch, as long as users indicate all required files with
command line options, M5_PATH is not needed.

This patch changes the M5_PATH semantics slightly to more closely match
PATH and so be more intuitive to users: after this commit, if the
given path contains a slash /, then the path is not searched for inside
M5_PATH, which is exactly how PATH works. Users can then select images
in the CWD with a leading ./ just as done for executables.

This is backwards incompatible if users were already specifying their paths
as ./, but this interface feels saner, because otherwise writing on the CLI
e.g.:

--disk-image path/to/my.disk

would previously fail to find the disk, even if it existed, which is very
counter-intuitive. The following will still fail however:

--disk-image my.disk

which is not ideal, but for now is a comprise between backwards
compatibility of having an M5_PATH and what users expect from CLI
interfaces.

Change-Id: Ic91e1cc20557b35b69490b6dc420e7d324fae1fc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23672
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: fs.py can take multiple disk images on most ISAs

All ISAs except SPARC can now take multiple disk images by passing
the --disk-image option multiple times.

Before this patch, several ISAs automatically mounted a secondary disk
called "linux-bigswap2.img", which had to be in M5_PATH even if the end
user did not want more than one disk. This was the case for for example
for X86 but not ARM.

This change was done to:

* allow ARM to have a second disk image in fs.py, which was not possible,
  and allow other ISAs like X86 and ARM to take any number of disk images

* provide a simpler, more intuitive CLI interface that does not require
  magic disk images to be present in M5_PATH to work for ISAs such as X86.

  Linux does not need that secondary image to boot correctly, so it is
  more friendly to support a minimal setup that requires the least amount
  of binaries to boot, and let supply the second image manually only if
  they need it.

* make fs.py --disk-image work more similarly across all ISAs

SPARC was left with a single disk only because its setup was a bit more
complex and would require further testing.

Change-Id: I8b6e08ae6daf0a5b6cd1d57d285a9677f01eb7ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23671
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

config: add --bootloader to fs.py and fs_bigLITTLE.py

This allows explicitly selecting which bootloader to use.

Before this commit, the bootloader had a fixed basename which
had to be present inside M5_PATH.

Change-Id: I02919207d6f175854017ae7b603d811da63d618e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23670
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

dev-arm: add boot_loader param to RealView setupBootLoader

This serves as a basis to select different bootloaders at runtime in
future commits.

Change-Id: I2ad0006fae9ad38ec1a6b1f11063be955a4dd2ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23669
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

mem: Make slicc generate some default methods explicitly.

Implicitly using the default copy constructor and assignment operator
is apparently deprecated, and gcc 9 will warn about it, breaking the
build.

Change-Id: Ida7a8a577e9d1cde9841eac7eee1af74563f1e27
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24927
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>

misc: Updated old gem5 website URLs with new gem5 website URLs

Jira: https://gem5.atlassian.net/browse/GEM5-272
Change-Id: Ieadb6dd7a44dde4b0be647c91896551822b06a57
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24503
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: move initCPU calls from initState to init

This commit moves the initCPU calls from initState to init
of base cpu (which were added in commit 0b8d02dec492215aa).
This is a temporary fix to solve the problem of X86System
initState getting called before initState of base cpu.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-292

Change-Id: I7434cd811536175562cfa2646f4326907fadad8c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24884
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

system-arm: AArch64 boot, init CNTFRQ_EL0

CNTFRQ_EL0 should be initialised to a uniform value in all cores present
in the system. Previously, this was only done if EL3 was present,
however architecture states CNTFRQ_EL0 may be written from the highest
EL implemented.
This patch moves this initilization outside of the EL3-only one.

Change-Id: Ibaa197de53d531ba898e5137ba4f46a8c9554699
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24683
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a GuestABI mechanism to allocate space for a return value.

Some ABIs (including 32 bit ARM, 64 bit x86) allocate their argument
registers differently depending on their return value. For instance,
if the value needs to be returned in memory because it's too big,
the caller could pass a pointer to where the result should be stored
when the function returns. This pointer acts like an invisible first
argument, offsetting where all the normal arguments actually live.

This change adds a mechanism to handle that case. The Result templates
can now declare an allocate() static method which is given a
ThreadContext *, and a reference to the Position object. It can perform
any adjustment it needs to before the normal argument extraction
starts.

Change-Id: Ibda9095f0e8c9882742d24f5effe309ccb514188
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23747
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

tests: Removed 70.twolf tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/quick/70.twolf` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: I19f2e20298e14a92f49adf0b8369e1fa09e0c1bc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24383
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed old quick/se/00.hello test resources

Change-Id: I0579e2b7a131c679fd7488457595f046702d64ef
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24326
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed the old ALPHA tests

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: Id24c84c70d977f7dbd2815b862af9b7eab638aca
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24388
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed 50.vortex tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/long/se/50.vortex` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: I9c40ca74aad11a80bd2a91bd67c9561ffa76e78f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24387
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed 60.bzip2 tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/quick/60.bzip2` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: I8469814a2f4715655960b9049182e426e10380ed
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24385
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed 30.eon tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/long/se/30.eon` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: Ieb32196a5f0ed3b3375ede5aec6f8fb8d162a865
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24386
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed 40.perlbmk tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/long/se/40.perlbmk` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: I3c7ea79717c90acf0656f30b878eb3f9f33fdb70
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24403
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Removed 20.parser tests

In an effort to cleanup the old tests, and migrate useful tests to be
executed via `test/main.py`, it has been decided that the
`test/long/se/70.twolf` tests should be removed.

Jira: https://gem5.atlassian.net/browse/GEM5-109
Change-Id: Ie0c0cd310ee51a37e80a84af3bf1cb603061da7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24384
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Fix ExeTraceRecord::traceInst.

A recent-ish change modified ExeTraceRecord::traceInst to make it more
consistent with DPRINTF-s by using dprintf_flag to print the trace
string. The generated string was passed as the format however, and that
means that all % characters in the output (from register names, for
example) are interpreted as format characters, mangling the output and
making cprintf angry since there are no corresponding arguments.

This change sets the format to "%s" instead, and passes the trace
string as the first argument. The argument won't be parsed for format
specifiers, and so should no longer get mangled.

Change-Id: I8fa9c2c22179a5b55104a618a4af4080a3931c5f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24643
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Move findFreeContext to System.

This method searches through the ThreadContexts stored in the system,
and has no concrete connection to Process other than it happened to be
used by a Process in the clone system call.

By moving it, we can use its functionality in classes other than
Process.

Change-Id: Ic6899c335dc13841c6fe948ea3a4f8ad67e562bb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24285
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Eliminate the breakAtKernelFunction function.

It looks like this function is supposed to allow you to set up a PC
based event which will trigger when the simulator executes a particular
kernel function. That event doesn't actually do anything, but you can
set a breakpoint there with gdb when debugging gem5 itself.

There are a couple of problems with this function. First, it assumes
that you want to set the breakpoint based on the first system in your
simulation. Frequently simulations have only one system, but there
isn't any rule that says they must, or any way to pick a different
system.

Second, this function assumes that you're in FS mode, that there is a
kernel, and that there is a kernel symbol table to look symbols up in.

On top of that, this function is a bit redundant since you can just use
gdb to debug the kernel inside a simulated system.

Change-Id: I8dadbd42fc7d4ccba2a035a2a72e6ede4b872f3c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24644
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: SP805 peripherals in VExpress_GEM5_Base

This patch adds the SP805 watchdog peripherals to the
VExpress_GEM5_Base platform.

Change-Id: I5c597d4d169359c1bde4bc4c7b3403091c772808
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24206
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

tests: Removing 10.mcf tests

10.mcf depends upon the proprietary SPEC benchmarks. It has been decided
that tests which rely on them should be removed.

Change-Id: If7ce915072643294bb4eb683ca1647d1022ee352
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24325
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Consolidate and move the CPU's calls to TheISA::initCPU.

TheISA::initCPU is basically an ISA specific implementation of reset
logic on architectural state. As such, it only needs to be called if
we're not going to load a checkpoint, ie in initState.

Also, since the implementation was the same across all CPUs, this
change collapses all the individual implementations down into the base
CPU class.

Change-Id: Id68133fd7f31619c90bf7b3aad35ae20871acaa4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24189
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

scons: fix --gold-linker build after --as-needed

The build was failing with:

/usr/bin/ld: unrecognized option '--as-needed -fuse-ld=gold'

and --verbose confirms that a single quoted CLI parameter was being
executed:

"-Wl,--as-needed -fuse-ld=gold"

This happened because at Ifb001786a66b0dd9b29865e39a5740313002f250
--as-needed was added, and because it is the second option to happen before
the following main.subst, it exposed the fact that the existing main.subst
was wrong, because it returns a string instead of the expected array.

Change-Id: I619d242d60fe9d27438638ac11c2b92512881f26
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24624
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: add Watchdog Module SP805 model

This provides a model of the Arm Watchdog Module SP805. This is based
on the public TRM rev. r1p0 (ARM DDI 0270B). Integration test harness
is not supported. Auto-generation of device tree entries is provided.

Change-Id: I6157cec2212d0a1d2685bcfa983d2acbae1f3377
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24205
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: VExpress_GEM5_Base, add refclock 32KHz

This patch adds the reference 32KHz clock to VExpress_GEM5_Base derived
platforms. This is in preparation for supporting the SP805 Watchdog.
I/O voltage domain and platform clock domain coupling is transferred
to the __init__ method for correctness.

Change-Id: Ic743fd986793f1e43b75fa60260c9b43b2737763
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24204
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Fix python line break in m5_exit test

A bug has been introduced with the new test url.
The line break should have used a backslash or (this is the recommended
way by PEP8) the implied line continuation via parenthesis.
This error was preventing the test to be loaded with the error message:

Exception thrown while loading
"/tmpfs/src/git/jenkins-gem5-prod/tests/gem5/m5_util/test_exit.py"
Ignoring all tests in this file.

and was not producing a failure (the test was not run: it was jus
ignored).

Change-Id: I0afe252d66d2f6546caaf5e7be811f34f88df82c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24625
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Implement CC reg accessors.

Change-Id: I4d8a7eaa097446b6aa3483880c2a7ed1a2e0d97c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23790
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Remove checkpointing from the ARM TLBs.

All of the state being checkpointed would either be provided by the
config directly, or would be brought into the TLB through normal fill
operations. Having this state in the checkpoint complicates the
checkpoint and significantly decreases compatibility with other TLB
implementations, or even variations of the same TLB, for instance if
the size was changed.

Change-Id: I4ea079dd01ff18fbc458b3aaaf88519dbcfdd869
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24389
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Get rid of the unused (and mostly undefined) zeroRegisters.

Change-Id: Iadf56e4e742506af7ae4b617d2dc5a56439aa407
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24188
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Updated CONTRIBUTING.md to discuss branches

There are some circumstances in which branches may be beneficial.
Though, in general, they should be discouraged. Therefore,
CONTRIBUTING.md has been enhanced to outline under what circumstances
creation of new branches is allowed and how they may be created and
used.

Change-Id: I2df8b38868e5c8146b068d9e7e957abbe3cf3b38
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24263
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Add a timeout to getremotetime

The helper is meant to check if the local binary is younger than the
remote binary (on gem5.org). If the call fails it is giving up and
it is just using the local regression (producing a warning).
The code is not handling the blocking behaviour of the connection:
simulaton might stall indefinitely
The patch is addressing this by providing a 10 seconds timeout.

Change-Id: I8f9c2e555c9a55d850a66d02f8e55f56ceda2ca3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24531
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

dev-arm: add FixedClock SimObject

This patch adds a simple fixed-rate clock implementation based on
SrcClockDomain. This provides RealView-derived platform users with
a convenient way for auto-generating their platform clocks in the DTB.

Change-Id: Ifade0cc8ed1b9e3423745698442cac5d8b99ab63
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24223
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Adding --bin-path option to select tests bin directory

So far lots of tests will download binaries inside the gem5 directory.
The path is also specific to the test being run.
This doesn't play well with an environment where gem5 is cloned from
scratch for every build, or if several gem5 are cloned in a single
machine.
Binaries will be automatically downloaded every time this happens.

This patch is adding a --bin-path option, so that it's possible to
setup a fixed directory with all pre-downloaded binaries.
By default it is set to None to preserve original behaviour.

Change-Id: I42fb25e3ce0a495c73672b15a097b1bd2607795c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24525
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: fs/linux/arm passing M5_PATH via commandline

This will make it configurable from the testing framework

Change-Id: If82d5e44927c67a1eaecf41505d1d55a6469a4cf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24524
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

mem-cache: Fix invalidation of prefetchers

Add an invalidation function to the AssociativeSet, so that entries
can be properly invalidated by also invalidating their replacement
data.

Both setInvalid and reset have been merged into invalidate to
indicate users that they are using an incorrect approach by
generating compilation errors, and to match CacheBlk's naming
convention.

Change-Id: I568076a3b5adda8b1311d9498b086c0dab457a14
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24529
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix EL2 target exception level for SP alignment fault.

This commit fixes the target exception Level EL2 for alignmemt fault, it
is based on HCR_EL2.tge bit.

Change-Id: Ief78b2aa0c86f1c3d9a5d3ca00121d163a9d6a86
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24303
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Updated tests to download from dist.gem5.org

Previously some tests, and test resources, downloaded content from
http://gem5.org . This is being migrated to http://dist.gem5.org.
http://dist.gem5.org should be used to store and retrieve resources
going forward.

Change-Id: I7162c76b9b8dc07657a6ba50d643fc93c9824fdf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24548
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Add print function to ReplaceableEntry

Add a basic print function to acquire and display information about
replaceable entries.

Change-Id: I9640113d305fbe086c5bfaf8928a911bfcac50bb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23567
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-cache: Add getter for the number of valid sub-blks

Add a getter function so that the number of valid sub-blocks can be
retrieved. As a side effect, make the respective counter private.

Change-Id: Icef8b51164c8e165872dcaebc65f5c330f16cb29
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22605
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Add multiple eviction stats

Add stats to inform how many blocks were evicted due to a sector
replacement/eviction.

Change-Id: I886365506016d0888f835d182b3b65a808a9dccd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22606
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Make findVictim non-const

In order to acquire stats when a victim is found,
findVictim must be made const.

Change-Id: I493c7849f07625c90b2b95fd220f50751f4d0f52
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22604
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Add more compression stats

Add stats to calculate the total number of compressions, decompressions
and the average compression size, in number of bits.

Change-Id: I5eb563856c1ff54216e1edcd2886332b7481cbfe
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22609
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-cache: Factor out multiple block eviction

Create a function to try to evict multiple blocks while checking for
transient state.

Change-Id: I6a879fa5e793cd92c4bdf4a258a133de4c865012
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22607
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

configs: MESI_Three_level python parameters

Allow specifying the L0 cache parameters via command line in
MESI_Three_Level.

Change-Id: Ie2a7f74790ed4c81c408857eccc2b439c60627f5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24255
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: add Arm build_opts for MESI_Three_Level and MOESI_hammer

Change-Id: I0d1c5671efdd3cb2041805ab615cdff76d3a5e8a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24254
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

util: Add fastmodel in valid tag list

The "fastmodel" tag has been used since 2019-08-22 so it should be an
valid tag in commit header.

Change-Id: I0032deaabc94e5896851da9afc28e1b1a699fed3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23923
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: A couple small fixes for the arm64 bootloader makefile.

First, remove a deprecated flag that gcc no longer recognizes.

Second, disable suffix based implicit makefile rules. These, in
combination with the %.o: boot.S rule, were tricking make into deleting
it's own makefile. How, you might ask?

make wants to update its makefile, since that's a thing it does
automatically. This is useful if you, for instance, have computed
header dependencies.

make decides it can make a file called "makefile" from a file called
"makefile.o" by doing a linking step.

make decides it can make makefile.o from boot.S from the %.o: boot.S
rule, which it does.

It then attempts to link makefile.o into makefile, but that fails
because it lacks a "main" function since it's using a built in rule
which doesn't know not to expect main. The makefile is clobbered in the
process.

make then deletes makefile.o because it was an implicit target,
eliminating all the evidence.

Change-Id: Ib0dfc333dc554caf5772dd8468dba6ba821f98ac
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24329
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Renaming tests to include dash between words

In `gem/hello_se/test_hello_se.py`, test suites were being generated
with no space between the word "test" and the test name. A dash has now
been added to make this a more readable.

Change-Id: I9d115a5941cc28af5476175fcbf2bd6940920291
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23025
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Migrated old quick/se/00.hello tests

Migrated old quick/se/00.hello tests over to the new testing frame work
(i.e., that executed via `./tests/main.py run`). These fail, so they are
currently being ignored.

These tests now pull from the http://dist.gem5.org cloud storage.

Change-Id: Iff94cce53655bc629a3deb1e11d8d194824751d4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23024
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: ELIsInHost, check VHE and SecEL2

This patch modifies ELIsInHost to correctly check for VHE
and Secure EL2 implementation.

Change-Id: I947dddfc6761794493fef3d59b3b35754d07ed6b
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24046
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Virtualization Host Extensions checking

This patch adds Armv8.1-VHE checking. This is based on the bit
ID_AA64MMFR1_EL1.VH being 0b1.

Change-Id: Ia3f278c63fe1b5448a686db87a46853fc8b6bea5
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24045
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

system-arm: bigLITTLE with VExpress_GEM5_V2 in dtb

This patch adds targets in the device tree Makefile for using
bigLITTLE DTS with VExpress_GEM5_V2 platform.

Change-Id: I7a424a36c78a24b96224526aa112ac5d060f790b
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24083
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-garnet: Use smart pointers for CrossbarSwitch's members

Use smart pointers for the pointers managed by CrossbarSwitch.

Change-Id: I71958c72cde5981d730aa3f68bba0ffbe4c2506f
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24244
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

x86: Stop clearing RAX for BIST in initCPU.

This doesn't actually change any behavior since RAX was being zeroed
anyway, but since we don't and almost certainly never will have a BIST
and the BIST is optional even in real hardware, we can drop it and
simplify initCPU a little further.

This reduces x86's initCPU function to just an invocation of
InitInterrupt's invoke.

Change-Id: I56b1aae2c1a738ef7ffabcf648dd7d0fb819d4e0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24187
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

x86: Move local APIC initialization out of initCPU.

The APIC can (and probably should) set its version register on its
own. Also it already configures its CPUID register when associated
with a CPU and doesn't need initCPU to do that.

Change-Id: I4611563668d197c48caf2f23fcde9ec2ec101fe7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24186
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

x86: Move miscreg initialization to the ISA class.

The initCPU function was setting a lot of values to zero or other
initial values, but that's something the ISA object can do as part of
its clear() method. This gets rid of a lot of code that was
individually zeroing registers, and also centralizes responsibility
for those registers in the ISA.

Change-Id: Iafcffd3f9329c39f77009b38b1696f91c36c117e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24185
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Remove check for kernel in fs.py.

It is *not* true that a kernel is required in FS mode. For example,
in SPARC, gem5 is set up to run actual system firmware which will load
a kernel from the disk image. Other systems can run in a bare metal
mode where they also have no kernel.

If a configuration requires a kernel, it should check for it in C++
where there context lives, not globally in fs.py.

Change-Id: Ib094c29474c248f866bd08d4f975648a2c707a19
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24284
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a dumpSimcall mechanism to GuestABI.

This dumps a signature for a simcall as if it was going to be invoked,
and can be used for debugging.

Change-Id: I6262b94ad4186bac8dc5a1469e9bb3b8ae9d34e1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23460
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Add a unit test for the GuestABI mechanism.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I76934d94b4c61570a4ca603388012c65280e2b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23197
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim: Implement a varargs like mechanism for GuestABI system.

This will let a function called with a GuestABI emulate the ...
mechanism available in C. To make that possible without the functions
knowing anything about the ABI and to follow C++'s (sensible)
templating and virtual function rules, you have to tell VarArgs what
types you might want to extract from it, unlike the pure ... varargs
style mechanism.

Also unlike ..., there is no mechanism in place to force the varargs
to appear last in the argument list. It will pick up the progress
through the arguments at the point it's reached, and will ignore any
later arguments. It would be possible to be more rigorous about this
by changing the callFrom templates, but the overhead in complexity
is probably not worth it.

Also, retrieving arguments through a VarArgs happens live, meaning at
the point that the argument is asked for. If the ThreadContext or
memory the argument lives in is modified before that point, the
retrieved value will reflect that modification and not what the
function was originally called with. Care should be taken so that this
doesn't cause corrupted arguments.

Finally, this mechansim (and the Guest ABI mechanism in general) is
complex and should have tests written for it. That should be possible
since ThreadContext is forward declared and so the test can say it
works however it wants or even ignore it completely. If that changes
in the future, we may need a mock ThreadContext implementation.

Jira Issue: https://gem5.atlassian.net/browse/GEM5-187

Change-Id: I37484b50a3e8c0d259d9590e32fecbb5f76670c1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23195
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

systemc: keep SC_CONCAT* macro

Call of TLM_DECLARE_EXTENDED_PHASE requires SC_CONCAT* macros. This change
keeps those macros to avoid compile errors.

Change-Id: I573c4c126a350ef1a752d1c50658e7d9cedaaeae
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24123
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch: Make the generic micropc enabled PCState set nupc to 1.

The default constructor of the micropc enabled generic PCState class
set the next micropc to 0, when the non-default constructor and at
least the x86 initCPU utility function set it to 1. This makes more
sense since either the micropc doesn't matter as a concept if the
instruction isn't microcoded, or, unless redirected by a micropc
branch, you're going to want to execute the next microop and not just
repeat the first one.

Change-Id: I418ea986a071453563c4c8aad4fc4eb4f7beb641
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24184
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: VExpress_GEM5_Base, fix daughterboard reference

VExpress_GEM5_Base states that its memory map is based on
CoreTile Express A15x2 A7x3, while the model used for the
Daughterboard Configuration Controller (DCC) is based on
Coretile Express A15x2.
These two daughterboard specifications differ in both on-chip
memory map and DCC clocks as of the TRMs.

This patch makes the reference consistent to Coretile Express
A15x2 and adds several non-confidential references to aid in
understanding the platform and adding new peripherals.

Change-Id: Ia55e7362bdc9ed6509f8eff4cbd7eb38e538d774
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24203
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests,base: Added GTest for base/socket.cc

It should be noted that some features of this class have not been fully
tested due to interaction with system-calls.

Change-Id: I8315188327e022ac4c98aa9ce4bd38243266ab17
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23984
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Updated gtest/logging.cc to print log rather than fail.

Previously the `GTestExitLogger.log` function utilized GTest's
`ADD_FAILURE_AT` macro. This meant, whenever `GTestExitLogger.log` were
called, the calling test would be fail. This is problematic when
trying to test code we expect to fail (i.e., when testing the error
handling code is working correctly). Therefore, the `log` function now
writes to stderr.

The `GTestExitLogger` class is used by the `panic` and `fatal` loggers
when running GTests. Instead of callnig `exit(1)` they throw a GTest
exception, which can be captured in a test using
`EXPECT_ANY_THROW(expection_thrower())`. Catching and verifying error
logs can be done via:

```
testing::internal::CaptureStderr();
/*
* "exception_thrower()" is a method we'd expect to call `fatal` or
* `panic`, and therefore exit the simulation with a non-zero exit
* code. When running via GTest, an exception is thrown instead.
*/
EXPECT_ANY_THROW(exception_thrower());
EXPECT_EQ("<error message>", testing::internal::GetCapturedStderr()));
```

Change-Id: I84a5f86bc573668d3dd5b40f626b43108dddb8e9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23983
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Include some required headers in amo.hh.

amo.hh was using several non-default definitions including
std::function, uint8_t, and std::array without including any headers
at all, and instead apparently relying on those having already been
brought in by an earlier include.

This change adds those includes explicitly.

Change-Id: I92166ff581e74bd705e10fd4fa454df179ae1a97
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24183
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base, gpu-compute: Move gpu AMOs into the generic header

Change-Id: I10d8aeaae83c232141ddd2fd21ee43bed8712539
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23565
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>