intel/blorp: Check for layer fast-clear restriction

v2: Update commit title (Jason Ekstrand)

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/blorp: Assert levels and layers are in range

v2 (Jason Ekstrand):
- Update commit title.
- Check aux level and layer as well.
v3 (Jason Ekstrand):
- Move the non-aux layer check.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

etnaviv: only flush resource to self if no scanout buffer exists

Currently a resource flush may trigger a self resolve, even if a scanout buffer
exists, but is up to date. If a scanout buffer exists we only ever want to
flush the resource to the scanout buffer. This fixes a performance regression.

Fixes: dda956340ce9 (etnaviv: resolve tile status when flushing resource)
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: add support for snorm textures

Based on a patch from Wladimir J. van der Laan and untested due
to lack of hardware. Binary blob emits those formats if GPU supports
HALTI1 (faked with ibvivhook).

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

etnaviv: add R8G8 texture support

Passes texwrap GL_ARB_texture_rg piglit (with faked full texture rg support).

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

etnaviv: add support for swizzled texture formats

Passes all ext_texture_swizzle piglits.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>

etnaviv: add support for extended texture formats

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

glapi: Fix -Wduplicate-decl-specifier due to double-const

Fix all lines in src/mesa/main/marshal_generated.c that declare
double-const variables. Below is all such lines, with duplicates
removed:

   $ grep 'const const' marshal_generated.c | sort -u
   const const GLboolean * pointer = cmd->pointer;
   const const GLvoid * indices = cmd->indices;
   const const GLvoid * pointer = cmd->pointer;

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv: use Mesa's u_atomic.h header

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radv: use Mesa's u_atomic.h header

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

swr: set an explicit clear_rect if scissor is not enabled.

Fix regression of "no rendering" on simple apps like glxgears by
setting an explicit full surface clear_rect when scissor is not
enabled.

This regressed with commit 00173d91 "st/mesa: don't set 16
scissors and 16 viewports if they're unused" due to an assumption
that a default scissor rect is always set, which was the case prior
to this optimization.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>

swr/rast: adjust std::string usage to fix build

Some combinations of c++ compilers and standard libraries had problems
with the string::replace code we were using previously.

This should fix the travis-ci system.

Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

travis: add missing libs: xdamage + xfixes

> configure: error: Package requirements (x11 xext xdamage >= 1.1 xfixes
> x11-xcb xcb xcb-glx >= 1.8.1 xcb-dri2 >= 1.8) were not met:
> No package 'xdamage' found
> No package 'xfixes' found

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

radeonsi: support indirect indexing in INTERP_* opcodes

The hardware doesn't support it, so we just interpolate all array elements
and then use indirect indexing on the resulting vector.

Clearly, this is not very efficient. There is an argument to be had for
adding if/else, or perhaps even pulling the data out of LDS directly.
Both don't really seem worth the effort, considering that it seems nobody
actually uses this feature.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

egl_dri2: swrastGetDrawableInfo: set *x, *y [v2]

In swrastGetDrawableInfo, set *x and *y, not just *w and *h;
this fixes a crash later in drisw_update_tex_buffer when the
(formerly) uninitialized x and y values are used to construct
an address in a call to llvmpipe_transfer_map.

Fixes crash in Piglit test
"spec@egl 1.4@eglcreatepbuffersurface and then glclear"
(<piglit dir>/bin/egl-create-pbuffer-surface -auto)
that occurred intermittently, e.g. when the uninitialized x and y in
drisw_update_tex_buffer just happened to contain absurd non-zero values.

v2: Initialize in case if function succeeds or fails, just like *w/*h.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl: fold _eglError() + return EGL_FALSE

The function _eglError() already explicitly returns EGL_FALSE,
explicitly to simplify the callers. Make use of it.

While EGL_FALSE is numerically identical to false, NULL, EGL_NO_FOO,
storage is not the same so we cannot use it for "everything".

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

egl: drop _eglInitImage() return type

Function cannot fail and always returns true.

v2: Inline the one line function in the header

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

glsl: do not call link_xfb_stride_layout_qualifiers() for fragment shaders

xfb only applies to the latest stage before the fragment shader, so
there is no need to invoke it in the fragment shader.

Fixes:
KHR-GL45.enhanced_layouts.xfb_stride_of_empty_list
KHR-GL45.enhanced_layouts.xfb_stride_of_empty_list_and_api

v2: do reset only if shaders provide an explicit stride

v3: do not call link_xfb_stride_layout_qualifiers() for fragment shaders
(Timothy)

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>

r600g: fix crash when file in R600_TRACE doesn't exist

…and print error in such case. Which probably is not a rare event btw
because fopen doesn't expand ~ to $HOME.

Also get rid of unused "bool ret" variable.

Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g: take into account offset to system inputs at tgsi_interp_egcm()

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100785
v2: I was too much twiddling whether to initialize nsys_inputs at the beginning of shader initialization or for allocation of system values, and by the time I decided to go with the first one, I forgot to change it back.

Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g: get rid of trailing whitespace

Signed-off-by: Constantine Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/asm: add support for other GDS operations.

This adds support for the GDS operations needed to do atomic
counters.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: don't merge GDS into VTX

We don't want vtx/tex instructions ending up in GDS sections.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: for memory instructions dump index gpr for read indirects also.

This just makes sure we can see the index gpr in the asm dumps.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: add support for vertex fetches via texture cache

On evergreen we can route vertex fetches via the texture cache,
and this is required for some images support. So add support
to the asm builder for it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: route indirect address register correctly for vtx fetches.

This was found during writing the images code, we need to
make sure we route the correct index register.

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: don't need vertex info for resolve shader.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drirc: whitelist glthread for a few games

Performance deltas:
    Alien Isolation: +17% (it varies depending on the location)
    Borderlands 2: +50% (it varies depending on the location)
    BioShock Infinite: +76% (benchmark)
    Civilization 6: +20% (benchmark)

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa/glthread: decrease the batch size for better perf scaling

This is the key to better performance.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gallium/hud: add glthread counters

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gallium/hud: add API-thread-busy for monitoring the thread load

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gallium/hud: add hud_pane::hud pointer

for later use

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa/glthread: add glthread "perf" counters and pass them to gallium HUD

for HUD integration in following commits. This valuable profiling data
will allow us to see on the HUD how well glthread is able to utilize
parallelism. This is better than benchmarking, because you can see
exactly what's happening and you don't have to be CPU-bound.

u_threaded_context has the same counters.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gallium/hud: move struct hud_context to hud_private.h

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

gallium/hud: rename API-thread-busy to main-thread-busy

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa/glthread: switch to u_queue and redesign the batch management

This mirrors exactly how u_threaded_context works.
If you understand this, you also understand u_threaded_context.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa/glthread: remove HAVE_PTHREAD guards

we are switching to util_queue.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

util: move pipe_thread_is_self from gallium to src/util

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radv: Remove unused args of radv_image_view_init.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Use correct image layout for blit based copies.

v2: Don't pass layout to image view usage mask.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 0628580eff6 "radv: Specify semantics of HTILE layout helpers."

mesa/marshal: add custom marshalling for glNamedBuffer(Sub)Data

These entry points are used by Alien Isolation and caused
synchronization with glthread. The async marshalling implementation
is similar to glBuffer(Sub)Data. However unlike Buffer(Sub)Data
we don't need to worry about EXTERNAL_VIRTUAL_MEMORY_BUFFER_AMD,
as this isn't applicable to these DSA variants.

Results in an approximately 6x drop in glthread synchronizations and a
~30% FPS jump in Alien Isolation (Medium preset, Athlon 860K, RX 480).

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radv: handle primitive id input into fragment shader with no geom shader

Fixes:
dEQP-VK.pipeline.framebuffer_attachment.no_attachments
dEQP-VK.pipeline.framebuffer_attachment.no_attachments_ms

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: compile fragment shader first.

This reorders things as we need something from the fs for the vs key.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: set prim_id for geometry shaders

Noticed in passing.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: set use_prim_id for tess shaders correctly.

Just noticed in passing.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nv50/ir: Properly fold constants in SPLIT operation

Fixes: b7d9677d ("nv50/ir: constant fold OP_SPLIT")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

radeonsi/gfx9: don't overallocate shader binaries

It's not needed. The hw doesn't fetch ahead over page boundaries.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/dri2: implement image offset query

This trivially adds support for the image offset query, which is needed
for the zwp_linux_dmabuf based EGL platform wayland implementation.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Daniel Stone <daniels@collabora.com>

mesa: only flush vertices when the viewport is different

This prevents glViewport() and friends to always flush and
trigger _NEW_VIEWPORT.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: remove useless comments in the viewport code path

No need to explain why calling a driver callback is needed.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

llvmpipe: initialize default fb correctly in setup

If lp_setup_bind_framebuffer() is never called, then setup fb x1/y1 was not
correctly initialized. This can happen if there's never a fb set - both
cso and llvmpipe would consider setting this with no cbufs and no zsbuf a
redundant change and therefore it would never get set.
We rely on this setup fb rect being initialized correctly for the tri intersect
tests, throwing away tris which don't intersect. Not initializing it meant
we'd then say it intersected, and we'd try to bin that despite that we have
no actual tiles to bin it to, leading to assertion failures (pretty harmless
since tile 0/0 always exists nevertheless as tiles are statically allocated,
albeit that should change at some point).
(Note probably not an issue with gl state tracker)

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

i965/miptree: Rework aux enabling

This commit replaces the complex and confusing set of disable flags with
two fairly straightforward fields which describe the intended auxiliary
surface usage and whether or not the miptree supports fast clears.
Right now, supports_fast_clear can be entirely derived from aux_usage
but that will not always be the case.

This commit makes functional changes.  One of these changes is that it
re-enables multisampled fast-clears which were accidentally disabled in
cec30a666930ddb8476a9452a89364a24979ff62 around a year ago.  Fixing this
improves the SynMark v7 DeferredAA test by around ~3% on some gen9
hardware.  This commit also gets us closer to enabling CCS_E for
window-system buffers which are Y-tiled.

Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Clamp clear colors to the representable range

Starting with Sky Lake, we can clear to arbitrary floats or integers.
Unfortunately, the hardware isn't particularly smart when it comes
sampling from that clear color.  If the clear color is out of range for
the surface format, it will happily return whatever we put in the
surface state packet unmodified.  In order to avoid returning bogus
values for surfaces with a limited range, we need to do some clamping.

Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>

i965: Don't bother with HiZ in renderbuffer_move_to_temp

This function is only used on gen4-5 which don't support HiZ.

Reviewed-by: Chad Versace <chadversary@chromium.org>

i965/miptree: Rename the non_msrt_mcs functions to _ccs

While we're here, we also make the two support checks static since there
are no users outside intel_mipmap_tree.c.

Reviewed-by: Chad Versace <chadversary@chromium.org>

i965/miptree: Delete the layered rendering resolve

We never fast-clear more than the base slice (LOD 0, layer 0) anyway, so
layered rendering without a resolve is always perfectly safe.  Should
this ever change in the future, we'll have to put some sort of resolve
back in but we can cross that bridge when we come to it.

Reviewed-by: Chad Versace <chadversary@chromium.org>

anv/cnl: Don't write to Cache Mode Register 1 on gen10+

For PartialResolveDisableInVC field recommendation is to
always set this to 0 and that's the default value of the bit.
So, we have nothing left to write to CACHE_MODE_1.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cnl: Don't write to Cache Mode Register 1 on gen10+

With below optimizations gone in gen10+ we have nothing left out to
write to CACHE_MODE_1:
Float Blend Optimization Enable: This bit have been removed in gen10+
Partial Resolve Disable in VC: Recommendation is to always set this
field to 0 in gen10+ and that's the default value of the bit.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeonsi: unreference vertex buffers when destroying the context

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

drirc: Add glsl_correct_derivatives_after_discard for The Witcher 2

This fixes the long-standing problem with black transitions in The Wicher 2.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98238

Signed-off-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: implement the workaround for Rocket League - postponed TGSI kill

Do KILL at the end of shaders so as not to break WQM.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100070

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: pass create_screen flags to r600_common_screen_init

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/dri: add a drirc workaround for Rocket League

This needs to be passed to gallium drivers.

No game fix is planned at this time.

The addition of glsl_correct_derivatives_after_discard is
generally a good thing for mesa compatibility with the broader GL
driver ecosystem.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100070

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/dri: get drirc options before creating pipe_screen

dri_init_options_get_screen_flags will return the flags for create_screen().

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium: allow passing 'unsigned flags' to create_screen()

for drirc options

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: don't flush vertices in glClientActiveTexture

Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: don't flag _NEW_ARRAY for GL_PRIMITIVE_RESTART_NV

Reviewed-by: Brian Paul <brianp@vmware.com>

llvmpipe:fix using 32bit rasterization mistakenly, causing overflows

We use the bounding box (triangle extents) to figure out if 32bit rasterization
could potentially overflow. However, we used the bounding box which already got
rounded up to 0 for negative coords for this, which is incorrect, leading to
overflows and hence bogus rendering in some of our private use.

It might be possible to simplify this somehow (we're now using 3 different
boxes for binning) but I don't quite see how.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

llvmpipe: fill in debug vertex info for tri rasterization

This is pretty useful for debugging rasterization issues, so turn it on
based on DEBUG (the actual existence of the fields is also conditionalized
on DEBUG, lines fill it out the same too).

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

Revert "radeonsi: don't emit partial flushes at the end of IBs (v2)"

This reverts commit c9040dc9e75c81024f88f3f1bab821ad2bc73db3.

People have reported it causes corruption on VI, and I see GPU hangs
on GFX9.

mesa: remove spurious flush in _mesa_Viewport()

I don't think this is actually required, if the viewport
values are different from the ones stored in the context, we
already flush and trigger _NEW_VIEWPORT in
set_viewport_no_notify().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: remove spurious flush in _mesa_DepthRange()

I don't think this is actually required, if the depth range
values are different from the ones stored in the context, we
already flush and trigger _NEW_VIEWPORT in
set_depth_range_no_notify().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: do not trigger _NEW_TEXTURE_STATE in glActiveTexture()

This looks like useless because gl_context::Texture::CurrentUnit
is not used by _mesa_update_texture_state() and friends.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: add KHR_no_error support for glViewport()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add viewport() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glViewportArrayv()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add viewport_array() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glViewportIndexed*()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename ViewportIndexedf() to viewport_indexed_err()

While are at it, add a 'context' parameter for consistency.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glClipControl()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add clip_control() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

i965: Convert upload_default_color to genxml.

This function was moved to genX_state_upload.c but was still not using genxml.
By converting it to genxml, we make some things simpler, like setting
haswell's border color state, but others are more complex, since the structs
used by each gen are different.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Remove unused code and delete file.

The sampler state code was all moved to genxml, so we can get rid of these
functions and delete the file.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Convert vs, gs, tcs, tes and cs samplers to genxml.

Since they just use the code that is already available in genX_state_upload.c,
convert them in one batch.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Convert fs sampler state to use genxml.

Also convert some auxiliary functions used by it, and copy
upload_default_color to genX_state_upload.c.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

genxml: fix gen5 sampler border color state.

Based on the current code, gen5 and gen6 have the same sampler border color
state struct. So fix the gen5 one to match gen6.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

aubinator: Dump sampler state pointers on gen6 too.

We already have a function to dump sampler states, so do that for gen6
too.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Fix -Wswitch in anv_layout_to_aux_usage()

anv_layout_to_aux_usage() lacked a case for
VK_IMAGE_LAYOUT_SHARED_PRESENT_KHR. Add an unreachable case, because we
don't support the extension.

Acked-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Fix -Wunused-variable in gen8_write_pma_stall_bits()

Trivial fix.  'ctx' was unused.

i965/CFL: Add PCI Ids for Coffee Lake.

Coffee Lake has a gen9 graphics following KBL.
From 3D perspective, CFL is a clone of KBL/SKL features.

v2: Change commit message, correct alignment <Anuj Phogat>
v3: Update IDs.
v4: Initialize l3_banks, correct nomenclature <Anuj>

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Benjamin Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

intel: Enable vulkan build for gen10

This patch just enables building Vulkan libs for gen10. We
still don't have gen 10 support enabled on Vulkan.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cnl: Generate and use gen10 functions

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cnl: Don't set FloatBlendOptimizationEnable{Mask}

This field is remove from CACHE_MODE_1 register in gen10.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cnl: Use GENX(xx) in place of GEN9_xx

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cnl: Add #defines for MOCS and genX(x)

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/genxml: Add Gen10 CACHE_MODE_1 definitions

Few of the fields in this register are changed as compared
to gen9.xml.

V2: Remove some fields which are not valid anymore.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel/genxml: Rename StartInstanceLocation to StartingInstanceLocation

This is required because we already have a macro defined with
the name StartInstanceLocation.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel/genxml: Rename IndirectStatePointer to BorderColorPointer

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel/genxml: Combine DataDWord{0, 1} fields in to ImmediateData field

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel/genxml: Add INSTDONE registers in gen10

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>