Fix scons build

mesa: include mtypes.h less

- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h

v2: fix radv build

Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: include dispatch.h less

Reviewed-by: Brian Paul <brianp@vmware.com>

radv: Implement VK_EXT_vertex_attribute_divisor.

Pretty straight forward, just pass the divisors through the shader
key and then do a LLVM divide.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac/surface: Allow S swizzle for displayable surfaces.

For dcn1 && < 64 bpp displayable surfaces, addrlib only accepts
S swizzles.

At the same time addrlib prefers D swizzles is allowed, so we can
just allow S swizzles as fallback.

Fixes: b64b712558 "ac/surface/gfx9: request desired micro tile mode explicitly"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

broadcom/vc5: Fix a stray '`' in a comment.

broadcom/vc5: Update the UABI for in/out syncobjs

This is the ABI I'm hoping to stabilize for merging the driver.  seqnos
are eliminated, which allows for the GPU scheduler to task-switch between
DRM fds even after submission to the kernel.  In/out sync objects are
introduced, to allow the Android fencing extension (not yet implemented,
but should be trivial), and to also allow the driver to tell the kernel to
not start a bin until a previous render is complete.

broadcom/vc5: Drop the finished_seqno optimization.

With the DRM scheduler changes, I'm about to remove all seqnos from the
UABI.

broadcom/vc5: Drop the throttling code.

Since I'll be using the DRM scheduler, we won't run into the problem of a
runaway client starving other clients of GPU time.

broadcom/vc5: Move flush_last_load into load_general, like for stores.

This should avoid mistakes with not flushing as we change the series of
loads.  Already, it fixes a hopefully unreachable case where we were
emitting just the TILE_COORDINATES and not the dummy store that needs to
go with it.

broadcom/vc5: Rename read_but_not_cleared to loads_pending.

This is a more obvious name for what the variable means, and matches what
it's called for stores.

broadcom/vc5: Refactor the implicit coords/stores_pending logic.

Since I just fixed a bug due to forgetting to do these right, do it once
in the helper func.

broadcom/vc5: Emit missing TILE_COORDINATES_IMPLICIT in separate z/s stores.

Fixes a simulator assertion failure in
KHR-GLES3.packed_depth_stencil.blit.depth32f_stencil8

broadcom/vc5: Add checks that we don't try to do raw Z+S load/stores.

This was dying in the simulator on
GTF-GLES3.gtf.GL3Tests.packed_depth_stencil.packed_depth_stencil_blit.
We'll need to do basically the same thing as Z32F/S8 does in the MSAA
Z24S8 case.

broadcom/vc5: Fix MSAA depth/stencil size setup.

The v3dX(get_internal_type_bpp_for_output_format)() call only handles
color output formats (which overlap in enum numbers with depth output
formats), so for depth we just need to take the normal cpp times the
number of samples.

st/va: add VP9 config to enable profile2

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: use PIPE_FORMAT_P016 format for VP9 profile2

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 profile2 support

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

vl: add VP9 profile2 support

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add VP9 config to enable profile0

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: parse VP9 uncompressed frame header

To get some of UVD required parameters.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add slice parameter handling for VP9

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add picture parameter handling for VP9

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add handles for VP9 buffers

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

st/va: add VP9 picture to context

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: cap VP9 support to progressive buffer

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: cap VP9 support to Raven

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 context buffer

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: get VP9 msg buffer

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: fill probability table to prob buffers

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 message buffer interface

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 prob table buffer

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

vl: add VP9 probability tables

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 dpb buffer size

The current FW has restricted the size to the worse case,
and the new dynamic dpb buffer support is on the way from
firmware side, we will change accordingly.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeon/vcn: add VP9 stream type for decoder

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

vl: add VP9 picture description

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

vl: add VP9 profile0 and format

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radv: fix radv_layout_dcc_compressed() when image doesn't have DCC

num_dcc_levels means that DCC is supported, but this doesn't
mean that it's enabled by the driver. Instead, we should rely
on radv_image_has_dcc().

This fixes some multisample regressions since 0babc8e5d66
("radv: fix picking the method for resolve subpass") on Vega.
This is because the resolve method changed from HW to FS, but
those fails are totally unexpected, so there might some
differences between Polaris and Vega here.

Fixes: 44fcf587445 ("radv: Disable DCC for GENERAL layout and compute transfer dest.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add radv_decompress_resolve_{subpass}_src() helpers

This helper shares common code before resolving using either
a fragment or a compute shader.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add radv_init_dcc_control_reg() helper

And add some comments.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

glsl: fix compat shaders in GLSL 1.40

The compatibility and core tokens were not added until GLSL 1.50,
for GLSL 1.40 just assume all shaders built with a compat profile
are compat shaders.

Fixes rendering issues in Dawn of War II on radeonsi which has
enabled OpenGL 3.1 compat support.

Fixes: a0c8b49284ef "mesa: enable OpenGL 3.1 with ARB_compatibility"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105807

mesa: Silence remaining unused parameter warnings in teximage.c

src/mesa/main/teximage.c: In function ‘_mesa_test_proxy_teximage’:
src/mesa/main/teximage.c:1301:51: warning: unused parameter ‘level’ [-Wunused-parameter]
                           GLuint numLevels, GLint level,
                                                   ^~~~~
src/mesa/main/teximage.c: In function ‘texsubimage_error_check’:
src/mesa/main/teximage.c:2186:30: warning: unused parameter ‘dsa’ [-Wunused-parameter]
                         bool dsa, const char *callerName)
                              ^~~
src/mesa/main/teximage.c: In function ‘copytexture_error_check’:
src/mesa/main/teximage.c:2297:32: warning: unused parameter ‘width’ [-Wunused-parameter]
                          GLint width, GLint height, GLint border )
                                ^~~~~
src/mesa/main/teximage.c:2297:45: warning: unused parameter ‘height’ [-Wunused-parameter]
                          GLint width, GLint height, GLint border )
                                             ^~~~~~
src/mesa/main/teximage.c: In function ‘check_rtt_cb’:
src/mesa/main/teximage.c:2679:21: warning: unused parameter ‘key’ [-Wunused-parameter]
 check_rtt_cb(GLuint key, void *data, void *userData)
                     ^~~
src/mesa/main/teximage.c: In function ‘override_internal_format’:
src/mesa/main/teximage.c:2756:55: warning: unused parameter ‘width’ [-Wunused-parameter]
 override_internal_format(GLenum internalFormat, GLint width, GLint height)
                                                       ^~~~~
src/mesa/main/teximage.c:2756:68: warning: unused parameter ‘height’ [-Wunused-parameter]
 override_internal_format(GLenum internalFormat, GLint width, GLint height)
                                                                    ^~~~~~
src/mesa/main/teximage.c: In function ‘texture_sub_image’:
src/mesa/main/teximage.c:3293:24: warning: unused parameter ‘dsa’ [-Wunused-parameter]
                   bool dsa)
                        ^~~
src/mesa/main/teximage.c: In function ‘can_avoid_reallocation’:
src/mesa/main/teximage.c:3788:53: warning: unused parameter ‘x’ [-Wunused-parameter]
                        mesa_format texFormat, GLint x, GLint y, GLsizei width,
                                                     ^
src/mesa/main/teximage.c:3788:62: warning: unused parameter ‘y’ [-Wunused-parameter]
                        mesa_format texFormat, GLint x, GLint y, GLsizei width,
                                                              ^
src/mesa/main/teximage.c: In function ‘valid_texstorage_ms_parameters’:
src/mesa/main/teximage.c:5987:40: warning: unused parameter ‘samples’ [-Wunused-parameter]
                                GLsizei samples, unsigned dims)
                                        ^~~~~~~

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Silence unused parameter warning in compressedteximage_only_format

Passing ctx to compressedteximage_only_format was the only use of the
ctx parameter in _mesa_format_no_online_compression, so that parameter
had to go too.

../../SOURCE/master/src/mesa/main/teximage.c: In function ‘compressedteximage_only_format’:
../../SOURCE/master/src/mesa/main/teximage.c:1355:57: warning: unused parameter ‘ctx’ [-Wunused-parameter]
 compressedteximage_only_format(const struct gl_context *ctx, GLenum format)
                                                         ^~~

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

blorp: Silence unused function warnings

vulkan/genX_blorp_exec.c:69:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
 blorp_get_surface_base_address(struct blorp_batch *batch)
 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from vulkan/genX_blorp_exec.c:35:0:
./blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
 blorp_emit_memcpy(struct blorp_batch *batch,
 ^~~~~~~~~~~~~~~~~
genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
 blorp_get_surface_base_address(struct blorp_batch *batch)
 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from genX_blorp_exec.c:33:0:
../../../../../src/intel/blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
 blorp_emit_memcpy(struct blorp_batch *batch,
 ^~~~~~~~~~~~~~~~~

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir/vars_to_ssa: Simplify node matching code

The matching code doesn't make real use of the return value. The main
function return value is ignored, and while the worker function
propagate its return value, the actual callback never returns false.

v2: Style fixes. (Jason)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/vars_to_ssa: Remove an unnecessary deref_arry_type check

Only fully-qualified direct derefs, collected in direct_deref_nodes,
are checked for aliasing, so it is already known up front that they
have only array derefs of type direct.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/vars_to_ssa: Rework register_variable_uses()

The return value was needed to make use of the old nir_foreach_block
helper, but not needed anymore with the macro version. Then go one
step further and move the foreach directly into the register variable
uses function.

v2: Move foreach to register_variable_uses(). (Jason)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Use nir_builder in lower_io_to_temporaries

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

radv: Enable RB+ on Raven.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

vulkan: fix build issue on android (both anv/radv)

Fixes linking errors against:

   anv_GetPhysicalDeviceImageFormatProperties2KHR
   radv_GetPhysicalDeviceImageFormatProperties2KHR

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: correctly parse disassembly with labels

LLVM now emits labels as part of the disassembly string, which is very
useful but breaks the old parsing approach.

Use the semicolon to detect the boundary of instructions instead of going
by line breaks.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: pass -O halt_waves to umr for hang debugging

This will give us meaningful wave information in the case of a hang where
shaders are still running in an infinite loop.

Note that we call umr multiple times for different sections of the ddebug
hang dump, and so the wave information will not necessarily match up
between sections.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

vulkan: Drop vk_android_native_buffer.xml

All the information in vk_android_native_buffer.xml is now in vk.xml.
The only exception is the extension type attribute which we can work
around in the generators while we wait for the XML to be fixed.

Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

nir/lower_atomics: Rework the main walker loop a bit

This replaces some "if (...} { }" with "if (...) continue;" to reduce
nesting depth and makes nir_metadata_preserve conditional on progress
for the given impl.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

radv: Enable RB+ where possible.

According to Marek, not enabling it on Stoney has a significant
negative performance impact. (And I guess this might impact
performance on Raven as well)

The register settings are pretty much copied from radeonsi. I did
not put this in the pipeline as that would make the pipeline more
dependent on the format which mean we would have to have more
pipelines for the meta shaders.

v2: Don't clear RB+ regs if not enabled as the CLEAR_STATE packet
    does already.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nir: Check if u_vector_init() succeeds

However, it only fails when running out of memory. Now, if we
are about to check that, we should be consistent and check
the allocation of the worklist as well.

CID: 1433512
Fixes: edb18564c7 nir: Initial implementation of a nir_instr_worklist
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

mesa: Assert base format before truncating to unsigned short

CID: 1433709
Fixes: ca721b3d8: mesa: use GLenum16 in a few more places
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

intel/dev: Assert the number of slices is not zero

Fixes: c1900f5b intel: devinfo: add helper functions to fill...
CID: 1433511
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Remove brw_bo_alloc_tiled_2d from intel_detect_swizzling.

I'd like to drop this pre-isl function.  This drops one of the two uses.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

mesa: fix glsl version mismatch in compat profile

Drivers that only support compat 3.0 were reporting GLSL 1.40
support. This fixes issues with the menu of Dawn of War II.

Fixes: a0c8b49284ef "mesa: enable OpenGL 3.1 with ARB_compatibility"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105807

radv: fix picking the method for resolve subpass

The source and destination image parameters were swapped.

No CTS changes on Polaris10, but I suspect this might
fix something.

Fixes: 2a04f5481df ("radv/meta: select resolve paths")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add shader BOs to the list at pipeline bind time

Otherwise, the shader BOs are not added to the list on SI because
prefetching isn't supported. Calling radv_cs_add_buffer() in the
prefetch codepath was a bad idea.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105952
Fixes: 4ad7595f35 ("radv: rename radv_emit_prefetch() to radv_emit_prefetch_L2")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Turo Lamminen <turo@alternativegames.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/surface: don't set the display flag for obviously unsupported cases (v2)

This enables the tile swizzle for some cases of the displayable micro mode,
and it also fixes an addrlib assertion failure on Vega.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: add shader binary padding for UMR

ac/surface/gfx9: request desired micro tile mode explicitly

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

docs/release-calendar: update to include 18.1 and 18.2

Dylan has kindly stepped up to help with 18.1.0, while I've taken the
liberty to nominate Andres for 18.2.0 ;-)

As always, people are welcome to swap/adjust where needed.

v2: Add Juan for 18.0.x (Juan)

Cc: Andres Gomez <agomez@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Acked-by: Dylan Baker <dylan@pnwbakers.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

glsl: remove unreachable assert()

Earlier commit enforced that we'll bail out if the number of terminators
is different than 2. With that in mind, the assert() will never trigger.

Fixes: 56b867395de ("glsl: fix infinite loop caused by bug in loop
unrolling pass")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

spirv: autotools: add vtn_gather_types_c.py in distribution tarball

Fixes: 042ee4bea26 "(spirv: Move SPIR-V building to Makefile.spirv.am and
spirv/meson.build")

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

radeonsi: autotools: add si_build_pm4.h in dist tarball

Fixes: 5777488406c ("radeonsi: move r600_cs.h contents into si_pipe.h,
si_build_pm4.h")

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

ac/nir: Use an array instead of hashtable for SSA defs.

Saves about 2% of compile time for F1 2017, as well as reduce code
size of an optimized libvulkan_radeon.so by about 1 KiB.

This still keeps the hashtable, as we also stored blocks in there.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

st/mesa: finalise tcs/tes/geom NIR before storing it to the cache

We don't create variants of the NIR so here we finalise it before
caching to avoid unnecessary processing when restoring it.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: exit st_translate_fragment_program() earlier for NIR path

This avoids a bunch of scanning that is only used by the TGSI path.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/nir: tidy up si_nir_load_sampler_desc()

This makes it easier to follow the code, and also initialises
dynamic_index which will be useful for adding bindless textures
support.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/nir: set uses_bindless_images for images

V2: add missing intrinsics (Spotted-by: Samuel Pitoiset)

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

nir: dont lower bindless samplers

We neeed to skip the var if its not a uniform here as well as checking
the bindless flag since UBOs can contain bindless samplers.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/glsl_to_nir: set paramater value offset as driver location for packed uniforms

This allows us to simplify the code and will also be useful for supporting
bindless textures.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/nir: don't add bindless samplers/images to declared bitmasks

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: stop calling _mesa_init_shader_object_functions()

This sets the LinkShader function for the driver, but for the st we
set it properly with the following call to st_init_program_functions().

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

anv/pipeline: Lower more constant initializers earlier

Once we've gotten rid of everything but the main entrypoint, there's no
reason why we should go ahead and lower them all.  This is what radv
does and it will make future work easier.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

spirv: Use the LOCAL_GROUP_SIZE system value

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir/lower_system_values: Support SYSTEM_VALUE_LOCAL_GROUP_SIZE

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

intel: aubinator: print out addresses of invalid instructions

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

radv: Always reset draw user SGPRs after secondary command buffer.

As we sometimes reset them to -1, -1 does not mean that they are
not written by the secondary command buffer.

Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv: Don't set instance count using predication.

The packet can sometimes be skipped, but we still think the change takes effect.

This just makes the packet always take effect.

Fixes: ad11fc3571 "radv: don't emit unneeded vertex state."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105942
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa/st/nir: fix instruction removal

At one point this kinda worked (or at least didn't cause problems).  But
with deref-instructions it results in dangling deref instructions not
being properly removed.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

mesa/st/nir: fix naked lowering pass call

Not using the macro means no nir_validate in debug builds, resulting in
problems showing up only after later passes.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: add comment about nir_src_copy()

So it is more clear about when to use nir_instr_rewrite_src()

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Make the miptree clear color setter take a gl_color_union

We want to hide the internal details of how the miptree's clear color
is calculated.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/miptree: Move the clear color and value setter implementations

These will get more complex in later commits.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Use the brw_context for the clear color and value setters

Do what all the other functions in the miptree API do.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeonsi: convert dispatch packet to little endian

The parameters for the compute engine are wrong when using
an E8860 on a big endian machine.
To fix this, convert the contents of struct dispatch_packet
to little endian.

This ensures that get_global_id(0) and similar functions
in the OpenCL code get the correct endian values, and
makes my simple OpenCL program work correctly.

Signed-off-by: Bas Vermeulen <bas@daedalean.ai>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: correct si_vgt_param_key on big endian machines

Using mesa OpenCL failed on a big endian PowerPC machine because
si_vgt_param_key is using bitfields and a 32 bit int for an
index into an array.

Fix si_vgt_param_key to work correctly on both little endian
and big endian machines.

Signed-off-by: Bas Vermeulen <bas@daedalean.ai>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: don't set RB+ registers on GFX9 chips without RB+

CLEAR_STATE initializes them properly.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

etnaviv: meson: add etnaviv_query_pm.[ch] to the sources

Otherwise building the driver will fail with unresolved symbols.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105960
Fixes: 72d2043be06 ("etnaviv: add perfmon query implementation")
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Clayton Craft <clayton.a.craft@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

i965: return the fourcc saved in __DRIimage when possible

When creating a image from a texture, the image's dri_format is
set to the first plane's format, and used to look up for the
fourcc. e.g. for FOURCC_NV12 texture, the dri_format is set to
__DRI_IMAGE_FORMAT_R8, we end up with a wrong entry in function
intel_lookup_fourcc():
   { __DRI_IMAGE_FOURCC_R8, __DRI_IMAGE_COMPONENTS_R, 1,
     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 }, } },
instead of the correct one:
   { __DRI_IMAGE_FOURCC_NV12, __DRI_IMAGE_COMPONENTS_Y_UV, 2,
     { { 0, 0, 0, __DRI_IMAGE_FORMAT_R8, 1 },
       { 1, 1, 1, __DRI_IMAGE_FORMAT_GR88, 2 } } },
as a result, a wrong fourcc __DRI_IMAGE_FOURCC_R8 was returned.

To fix this bug, the image inherits the texture's planar_format that
has the original fourcc; Upon querying, if planar_format is set,
return the saved fourcc; Otherwise fall back to the old way.

v3: add a bug description and "cc mesa-stable" tag (Jason)
  remove redundant null pointer check (Tapani)
  squash 2 patches into one (James)
v2: fall back to intel_lookup_fourcc() when planar_format is NULL
  (Dongwon & Matt Roper)

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Xiong, James <james.xiong@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

nir: Fix a typo in src/compiler/Makefile.nir.am

Since 31d91f019b58ca362c05db1fd0c75fedd169cd7b, the makefile tries to
find the file SConstript.spirv instead of SConscript.spirv which breaks
the make dist command.

Reviewed-by: Brian Paul <brianp@vmware.com>

radv: fix prefetching of vertex shader and VBOs on SI

Forgot one check... Too many mistakes for a simple change.

Fixes: f1d7c16e85 ("radv: fix prefetching compute shaders on CIK and older chips")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: implement VK_AMD_shader_core_properties

Simple extension that only returns information for AMD hw.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add RADV_NUM_PHYSICAL_VGPRS constant

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add radv_get_num_physical_sgprs() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>