anv/clear: Disable the scissor operation

Since the scissor rectangle always matches that of the framebuffer,
this operation isn't needed.

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Kristian Høgsberg Kristensen <kristian.h.kristensen@intel.com>

util: Fix race condition on libgcrypt initialization

Fixes intermittent Vulkan CTS failures within the test groups:
dEQP-VK.api.object_management.multithreaded_per_thread_device
dEQP-VK.api.object_management.multithreaded_per_thread_resources
dEQP-VK.api.object_management.multithreaded_shared_resources

Signed-off-by: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94904

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/lower_system_values: Simplify the computation of LocalInvocationIndex

anv/pipeline: Set up flat enables correctly

genxml: Fix the name of a 3DSTATE_SF/SBE field on gen6-7.5

genxml: Break output detail of 3DSTATE_SF on gen7 into a struct

This makes it work like 3DSTATE_SBE[_SWIZ] on gen7+

genxml: Fix up MOCS in RENDER_SURFACE_STATE on gen6 to match gen7

anv/meta: Make clflushes conditional on !devinfo->has_llc

anv/formats: Advertise blit support for stencil

Thanks to advances in the blit code, we can do this now.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Add support for W-tiled destinations

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl/surface_state: Set the correct pitch for W-tiled surfaces

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Add another passthrough varying to the VS

We need the VS to provide some setup data for other stages.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/image: Remove the offset parameter from image_view_init

The only place we were using this was in meta_blit2d which always creates a
new image anyway so we can just use the image offset.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Add a bind_dst helper function

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Simplify create_iview

Now it just creates the image and view.  The caller is responsible for
handling the offset calculations.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

nir/gather_info: Handle discard_if

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/meta2d: Add support for blitting from W-tiled sources on gen7

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Remove surf_get_intratile_offset_el

The intratile offset may not be a multiple of the element size so this
calculation is invalid.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

isl: Rework the get_intratile_offset function

The old function tried to work in elements which isn't, strictly speaking,
a valid thing to do.  In the case of a non-power-of-two format, there is no
guarantee that the x offset into the tile is a multiple of the format
block size.  This commit refactors it to work entirely in terms of a tiling
(not a surface) and bytes/rows.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/image: Expose the guts of CreateBufferView for meta

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Refactor in preparation for different src/dst types

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Add layouts for using a texel buffer source

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Rename the descriptor set and pipeline layouts

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Enhance teardown and clean up init error paths

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Factor binding the source image into a helper

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Inline meta_emit_blit2d

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Pass the source pitch into the shader

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Break the texelfetch portion of shader building into a helper

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Fix whitespace

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Fix a NIR writemask

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/meta2d: Don't declare an array sampler in the fragment shader

With the new blit framework we aren't using array textures and, from
talking with Nanley, we don't think it's going to be useful in the future
either.  Just get rid of it for now.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

anv/blit2d: Remove the tex_dim parameter from copy_fragment_shader

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

Merge remote-tracking branch 'public/master' into vulkan

i965/fs: Use the scale helper in surface_builder

As requested by Curro

radeonsi: do per-pixel clipping based on viewport states

In other words, vport scissors are derived from viewport states.
If the scissor test is enabled, the intersection of both is used.

The guard band will disable clipping, so we have to clip per-pixel.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

nv50/ir: do not try to attach JOIN ops to ATOM

This might result in an INVALID_OPCODE dmesg error in case a join is
attached to an atomic operation.

Spotted with arb_shader_image_load_store-host-mem-barrier on GK104.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

radeonsi: raise number of samplers per shader to 32

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94835
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: expand the compressed color and depth texture masks to 64 bits

This is in preparation of raising the number of exposed sampler views to 32
bits, which will raise the total number of sampler views to 33 for the
polygon stipple texture. That texture should never be compressed (and it's
certainly not a depth texture), but this approach seems cleaner to me than
special-casing the last slot in all affected code paths.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: replace magic 16 by SI_NUM_USER_SAMPLERS

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: raise PIPE_MAX_SAMPLERS to 32

The previous value of 18 was motivated by having drivers that want to expose
16 samplers but also use some additional samplers for internal use. Raising
the value even higher isn't going to hurt that case.

On the other hand, some drivers actually use PIPE_MAX_SAMPLERS as the number
of samplers they expose externally, so raising this number above 32 is fragile
(because several places in the code use bitfields, and tracking down and
widening all of them is prone to miss some case).

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/glsl_to_tgsi: make samplers_used an uint32_t (v2)

It is used as a bitfield, so it seems cleaner to keep it unsigned.

The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.

v2: add an assert for bitfield size and use 1u << idx

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)

tgsi/scan: add an assert for the size of the samplers_declared bitfield

The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.

Reviewed-by: Brian Paul <brianp@vmware.com>

draw/aaline: stronger guard against no free samplers (v2)

Line anti-aliasing will fail when there is no free sampler available. Make
the corresponding guard more robust in preparation of raising
PIPE_MAX_SAMPLERS to 32.

The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.

v2: add an assert for bitfield size and use 1u << idx

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)

util/pstipple: stronger guard against no free samplers (v2)

When hasFixedUnit is false, polygon stippling will fail when there is no free
sampler available. Make the corresponding guard more robust in preparation
of raising PIPE_MAX_SAMPLERS to 32.

The literal 1 is a (signed) int, and shifting into the sign bit is undefined
in C, so change occurences of 1 to 1u.

v2: add an assert for bitfield size and use 1u << idx

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)

svga: new SVGA_MSAA env var to disable/enable MSAA pixel formats

On by default.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

svga: add some trivial null pointer checks

These small mallocs will probably never fail, but static analysis tools
may complain about the missing checks.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

trace: add missing set_shader_images()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: disable perfect ZPASS counts for PIPE_QUERY_OCCLUSION_PREDICATE

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't use the real barrier instruction in tess ctrl shaders

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Revert "clover: Fix build against clang SVN >= r265359"

This reverts commit 0daab9878d2b96356cf667591a2c877d912be52d.

The corresponding clang change was reverted.

Trivial.

nir/types: Add a wrapper for count_attribute_slots

Reviewed-by: Rob Clark <robdclark@gmail.com>

genxml: Add GEN6 genxml

Not used yet, but let's put it here for now.

r600: use radeon_emit in a few more places in evergreen_compute

This is just a cleanup of the code.

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: make compute global buffer functions static.

This moves things around so that the global buffer handling
functions in evergreen_compute.c are static.

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: make two compute functions static.

These aren't used outside evergreen_compute.c

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: using pipe_grid_info more in evergreen_compute.

No reason to pull the pieces apart here, also make
one of the functions static as it's unused outside this.

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: in evergreen_compute use ctx consistently instead of ctx_

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: use rctx consistently in evergreen_compute.c

Another step towards cleaning this up.

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: cleanup whitespace in evergreen_compute.c

This aligns the code with the style of the rest of the driver.

Makes editing it a lot less painful.

Acked-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

GL3.txt: Mark ARB_framebuffer_no_attachments as done

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

r600g: Enable ARB_framebuffer_no_attachments

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Enable ARB_framebuffer_no_attachments

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Improve assert info out of si_set_framebuffer_state()

Lets give the developer a little hand if we are going to assert
on a zero literal at the end of a branch.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Allow 16 samples MSAA mode for PIPE_FORMAT_NONE

For ARB_framebuffer_no_attachment; A is_format_supported() query
with 'PIPE_FORMAT_NONE' passed implies a query of the number of
samples supported from the framebuffer with no attachment.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

softpipe: Set samples and layers in set_framebuffer_state() cb

Carries across the number of samples and layers state in the
'softpipe_set_framebuffer_state()' callback. This state is
part of 'ARB_framebuffer_no_attachments' support.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa/st: Update framebuffer state with no.of samples,layers

Handle the case of ARB_framebuffer_no_attachment.
Also, kill off a dead debug printf() call while we are here.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/trace: Dump no.of samples and layers in fb state

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: Put no.of {samples,layers} into pipe_framebuffer_state

Here we store the number of samples and layers directly in the
pipe_framebuffer_state so that in the case of
ARB_framebuffer_no_attachment we may make use of them directly.

Further, we adjust various gallium/auxiliary helper functions
accordingly.

V2:
  Convert branches in util_framebuffer_get_num_layers() and
  util_framebuffer_get_num_samples() to their canonical form.

V3:
  'git stash pop' the typo fix of 'cbufs' which should be
  'nr_cbufs' that was missing in V2, woops! Thanks Marek for
  pointing this out yet again.

V4:
  Squash in the following patch:

  'gallium/util: Ensure util_framebuffer_get_num_samples() is valid'

   Upon context creation, internal driver structures are malloc()'ed
   and memset() to zero them. This results in a invalid number of
   samples 'by default'. Handle this in the simplest way to avoid
   elaborate and probably equally sub-optimial solutions.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa/st: Set _NumSamples in update_framebuffer_state()

Using PIPE_FORMAT_NONE to indicate what MSAA modes are supported
with a framebuffer using no attachment.

V.2:
 Rewrite MSAA mode loop to be more general.
V.3:
 Move comment to right place after loop was rewritten.
V.4: [airlied]
 remove unneeded variable, and assert, and unneeded pipe assignment

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

gallium: Obtain ARB_framebuffer_no_attachment constants

Set default values for the constants required in
ARB_framebuffer_no_attachments and obtained the number
of layers from ``PIPE_CAP_MAX_TEXTURE_ARRAY_LAYERS``.

We also obtain the MaxFramebufferSamples value using
a query back to the driver for PIPE_FORMAT_NONE.

V.1:
 Merge if branch predicates into one branch.
 Move const init into st_init_limits()

[airlied: whitespace fixup]
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium: Add PIPE_CAP_FRAMEBUFFER_NO_ATTACHMENT

Add PIPE_CAP to determine if the GL extension
'GL_ARB_framebuffer_no_attachments' shall be
supported.

The driver is required to support 'PIPE_FORMAT_NONE'
via its 'is_format_supported()' callback in order
to determine the MSAA modes the hardware supports so
that values requested from the application using
'GL_ARB_framebuffer_no_attachments' may be quantized
to what the hardware expects.

V.2:
 Fix doc for a more detailed description of the PIPE_CAP
 and the corresponding GL constant.

V.3:
 Renamed and repurposed once again.

V.4:
 Remove CAP from cap_mapping array.

[airlied: fix damaged whitespace]

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/st: Use _mesa_geometric_ functions appropriately

Change references to gl_framebuffer::Width, Height, MaxNumLayers
and Visual::samples to use the _mesa_geometric_ convenience functions
for those places where the geometry of the gl_framebuffer is needed.
This is in contrast to the geometry of the intersection of the
attachments of the gl_framebuffer.

This patch paves the way to enable GL_ARB_framebuffer_no_attachements
for all gallium drivers.

V.2:
 Remove itermeditate variable state.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: Add comment to framebuffer_parameteri()

V.2:
 Change 'N.B.,' to 'NOTE:'.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/sf_state: Pull flat_enables out of prog_data

Previously, we were walking over the shader source to figure out which
inputs should be marked flat.  Now, we can just pull it out of prog_data.
This is needed for properly setting up 3DSTATE_SF/SBE for Vulkan and it
also means that it will get properly cached.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Add a flat_inputs field to prog_data

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

brw/device_info: Add a helper for getting a device name

This is needed by the Vulkan driver

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs_surface_builder: Mask signed integers after conversion

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965/fs: Make the repclear shader support either a uniform or a flat input

In the Vulkan driver we use a single flat input instead of a uniform
because setting up push constants is more disruptive to the pipeline than
setting up another vertex input.  This uses the number of uniforms as a key
to keep it working for the GL driver.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move get_hw_prim_for_gl_prim to brw_util.c

It's used by brw_compile_gs in brw_vec4_gs_visitor.cpp so it needs to be in
a file that's linked into libi965_compiler.la.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeonsi: set shader calling conventions

Note that old mesa + new LLVM or new mesa + old LLVM breaks
with this change and the corresponding LLVM change (D18559).

For LLVM version <= 3.8 we use the old method, but we can't detect
people using a post 3.8 svn version that is still too old.

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

drirc: add a workaround for blackness in Warsow

Cc: 11.1 11.2 <mesa-stable@lists.freedesktop.org>

glsl: use has_shader_storage_buffer_objects helper

Replaces open-coded logic with existing helper.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

glsl: remove remaining tabs in link_uniform_blocks.cpp

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

mesa: remove unused IsShaderStorage field

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

glsl: fully split apart buffer block arrays

With this change we create the UBO and SSBO arrays separately from the
beginning rather than putting them into a combined array and splitting
it apart later.

A bug is with UBO and SSBO stage reference querying is also fixed as
we now use the block index to lookup the references in the separate arrays
not the combined buffer block array.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

freedreno/ir3: insert extra move into phi

We had an implicit assumption that the phi src was assigned in it's
source (pred) block leading into the phi.  But this is not true with
NIR, so we can't just ignore the source block specified in the
nir_phi_src.  Insert an extra mov in the source block.  If it is not
required the CP pass will take it back out again.

Fixes:

  ./tests/spec/glsl-1.10/execution/vs-call-in-nested-loop.shader_test
  ./tests/spec/glsl-1.10/execution/vs-inner-loop-modifies-outer-loop-var.shader_test

and probably others.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: eliminate unnecessary absneg's

The frontend inserts (abs) and (neg)'s to convert between NIR boolean
(~0/0) and native boolean (1/0).  So we'd end up with things like:

   cmps.s.ge r1.x, ...
   absneg.s r1.x, (neg)r1.x
   absneg.s r1.x, (abs)r1.x
   sel.b32 r2.x, r0.x, r1.x, r0.y

The (neg) already gets collapsed due to the following (abs).  Now by
realizing that r1.x comes from a cmps.s instruction, we can drop the
(abs) as well.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

clover: Fix build against clang SVN >= r265359

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

radeonsi: use bounded indexing for samplers

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: use bounded indexing for constant buffers

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: allow multiple exports of the same texture with different usage

Instead of failing an assertion, disable DCC and CMASK on the first export
that needs it, and merge the external usage flags.

v2: clear the EXPLICIT_FLUSH flag if it's not set; whitespace fixes

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

docs/relnotes: document EGL_KHR_reusable_sync

egl: add EGL_KHR_reusable_sync to egl_dri

This patch enables an EGL extension, EGL_KHR_reusable_sync.
This new extension basically provides a way for multiple APIs or
threads to be excuted synchronously via a "reusable sync"
primitive shared by those threads/API calls.

This was implemented based on the specification at

https://www.khronos.org/registry/egl/extensions/KHR/EGL_KHR_reusable_sync.txt

v2
- use thread functions defined in C11/threads.h instead of
  using direct pthread calls
- make the timeout set with reference to CLOCK_MONOTONIC
- cleaned up the way expiration time is calculated
- (bug fix) in dri2_client_wait_sync, case EGL_SYNC_CL_EVENT_KHR
  has been added.
- (bug fix) in dri2_destroy_sync, return from cond_broadcast
  call is now stored in 'err' intead of 'ret' to prevent 'ret'
  from being reset to 'EGL_FALSE' even in successful case
- corrected minor syntax problems

v3
- dri2_egl_unref_sync now became 'void' type. No more error check
  is needed for this function call as a result.
- (bug fix) resolved issue with duplicated unlocking of display in
  eglClientWaitSync when type of sync is "EGL_KHR_REUSABLE_SYNC"

Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

freedreno/ir3: deal with duplicate phi sources

Otherwise we end up with funny things like:

  mov.f32f32 r0.x, r1.y
  mov.f32f32 r0.x, r1.y

(It doesn't happen as much after fixing the problem w/ CP into phi src,
but it can still happen since we aren't too clever about generating phi
sources in the first place.)

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: fix silly brain-fart in RA

We want to consider all the vars, not 1/32nd of them, when extending
live-ranges.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: don't cp into phi's

The block defining a phi source might not have been executed.  If we
allow copy propagation, we could end up pointing to a src instruction in
the wrong block.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: we can't store immediate values

Fixes some transform-feedback piglits, like:

bin/ext_transform_feedback-nonflat-integral

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: add dumping for use/def/live-in/live-out

Turned out to be useful to debug an issue in RA.  Let's keep it.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: drop unused instr category arg

No longer used, so drop the extra arg to ir3_instr_create()

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/ir3: remove ir3_instruction::category

Signed-off-by: Rob Clark <robclark@freedesktop.org>