Christian Gmeiner [Sat, 21 Mar 2020 10:16:37 +0000 (11:16 +0100)]
etnaviv: get rid of SE_CLIP_*
The only difference between e.g. SE_SCISSOR_RIGHT and SE_CLIP_RIGHT
is the used margin value. With that information we can remove
SE_CLIP_* and apply the different margins during emit time.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Jose Fonseca [Sat, 28 Mar 2020 10:36:28 +0000 (10:36 +0000)]
gitlab-ci: Prune all SCons jobs except scons-win64, and allows failures.
Based on the discussion in https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4352
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4363>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4363>
Samuel Pitoiset [Fri, 27 Mar 2020 15:40:38 +0000 (16:40 +0100)]
nir/algebraic: add fexp2(fmul(flog2(a), 0.5) -> fsqrt(a) optimization
Helps some Wolfenstein II and Wolfenstein Youngblood shaders.
pipeline-db (VEGA10/ACO):
Totals from affected shaders:
SGPRS: 17904 -> 17904 (0.00 %)
VGPRS: 14492 -> 14492 (0.00 %)
Spilled SGPRs: 20 -> 20 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
1753152 ->
1749708 (-0.20 %) bytes
Max Waves: 2581 -> 2581 (0.00 %)
pipeline-db (VEGA10/LLVM):
Totals from affected shaders:
SGPRS: 26656 -> 26656 (0.00 %)
VGPRS: 23780 -> 23780 (0.00 %)
Spilled SGPRs: 2112 -> 2112 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
2552712 ->
2549236 (-0.14 %) bytes
Max Waves: 3359 -> 3359 (0.00 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4353>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4353>
Jose Fonseca [Fri, 27 Mar 2020 15:07:32 +0000 (15:07 +0000)]
scons: Prune out unnecessary targets.
This prunes out all targets except libgl-gdi, libgl-xlib, and svga, as
suggested by Marek Olšák.
libgl-xlib will be remove once I have had time to confirm no automated
tests we have rely upon it.
There are also a bunch of Makefile.sources which become orphaned as
result, that are not taken care of in this change.
v2: Prune remainders of swr support.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Timur Kristóf [Thu, 26 Mar 2020 18:36:05 +0000 (19:36 +0100)]
aco: Don't store LS VS outputs to LDS when TCS doesn't need them.
Totals:
Code Size:
254764624 ->
254745104 (-0.01 %) bytes
Totals from affected shaders:
VGPRS: 12132 -> 12112 (-0.16 %)
Code Size: 573364 -> 553844 (-3.40 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 16:45:55 +0000 (17:45 +0100)]
aco: When LS and HS invocations are the same, pass LS outputs in temps.
We know that in this case, the LS and HS invocations are working
on the exact same vertex, so it's safe to skip the LDS.
Totals:
VGPRS:
3960744 ->
3961844 (0.03 %)
Code Size:
254824300 ->
254764624 (-0.02 %) bytes
Max Waves:
1053748 ->
1053574 (-0.02 %)
Totals from affected shaders:
VGPRS: 26152 -> 27252 (4.21 %)
Code Size:
1496600 ->
1436924 (-3.99 %) bytes
Max Waves: 4860 -> 4686 (-3.58 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 16:30:16 +0000 (17:30 +0100)]
aco: Extract store_output_to_temps into a separate function.
Will be used by LS output stores.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 12 Mar 2020 15:28:48 +0000 (16:28 +0100)]
aco: Fix workgroup size calculation.
Clear the workgroup size for all supported shader stages.
Also, unify the workgroup size calculation accross various places.
As a result, insert_waitcnt can use the proper workgroup size
which means that some waits can be dropped from tessellation
shaders. Also, in cases where the previous calculation was wrong,
we now insert s_barrier instructions.
Totals from affected shaders (GFX10):
Code Size: 340116 -> 338484 (-0.48 %) bytes
Fixes: a8d15ab6daf0a07476e9dfabe513c0f1e0f3bf82
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 16:17:38 +0000 (17:17 +0100)]
aco: Extract setup_tcs_info to a separate function.
Will be required by the workgroup size calculation.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 11:19:32 +0000 (12:19 +0100)]
aco: Zero-fill undefined elements in create_vec_from_array.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Tue, 24 Mar 2020 14:46:55 +0000 (15:46 +0100)]
aco: Change isel inputs/outputs to a flat array.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Tue, 17 Mar 2020 12:43:08 +0000 (13:43 +0100)]
aco: Treat outputs of the previous stage as inputs of the next stage.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Fri, 13 Mar 2020 09:14:37 +0000 (10:14 +0100)]
nir: Collect if shader uses cross-invocation or indirect I/O.
The following new fields are added to tess shader info:
* `tcs_cross_invocation_inputs_read`
* `tcs_cross_invocation_outputs_read`
These are I/O masks that are a subset of inputs_read and outputs_read
and they contain which per-vertex inputs and outputs are read
cross-invocation.
Additionall, the following new fields are added to shader_info:
* `inputs_read_indirectly`
* `outputs_accessed_indirectly`
* `patch_inputs_read_indirectly`
* `patch_outputs_accessed_indirectly`
These new fields can be used for optimizing TCS in a back-end compiler.
If you can be sure that the TCS doesn't use cross-invocation inputs
or outputs, you can choose a different strategy for storing VS and TCS
outputs. However, such optimizations might need to be disabled when
the inputs/outputs are accessed indirectly due to backend limitations,
so this information is also collected.
Example: RADV currently has to store all VS and TCS outputs in LDS, but
for shaders when only inputs and/or outputs belonging to the current
invocation ID are used, it could skip storing these in LDS entirely.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Fri, 13 Mar 2020 11:39:23 +0000 (12:39 +0100)]
aco: Use more optimal sequence at the beginning of merged shaders.
It can be further optimized in the future, but
the new sequence already has a few advantages:
* Uses fewer instructions
* Uses even fewer instructions in wave32 mode
* Doesn't use the VALU at all
Totals from affected shaders (GFX10):
VGPRS: 43504 -> 43496 (-0.02 %)
Code Size:
2436000 ->
2423688 (-0.51 %) bytes
Max Waves: 8704 -> 8705 (0.01 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 12 Mar 2020 18:54:16 +0000 (19:54 +0100)]
aco: Skip 2nd read of merged wave info when TCS in/out vertices are equal.
When TCS has an equal number of input and output, it means that the
number of VS and TCS invocations (LS and HS) are the same; and that
the HS invocations operate on the same vertices as the LS.
When this is the case, this commit removes the else-if between
the merged VS and TCS halves, making it possible to schedule
and optimize the code accross the two halves.
Totals:
SGPRS:
5577367 ->
5581735 (0.08 %)
VGPRS:
3958592 ->
3960752 (0.05 %)
Code Size:
254867144 ->
254838244 (-0.01 %) bytes
Max Waves:
1053887 ->
1053747 (-0.01 %)
Totals from affected shaders:
SGPRS: 29032 -> 33400 (15.05 %)
VGPRS: 35664 -> 37824 (6.06 %)
Code Size:
1979028 ->
1950128 (-1.46 %) bytes
Max Waves: 7310 -> 7170 (-1.92 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 12 Mar 2020 15:55:19 +0000 (16:55 +0100)]
aco: Allow combining LDS loads when loading tess factors.
Previously the tess factors were loaded individually, but now they can
be loaded using a single LDS load instruction.
Note that the inner and outer tess factors are not yet combined.
Totals (GFX10):
Code Size:
254896008 ->
254879212 (-0.01 %) bytes
Totals from affected shaders (GFX10):
Code Size:
2028352 ->
2011556 (-0.83 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 12 Mar 2020 15:30:58 +0000 (16:30 +0100)]
aco: Allow combining TCS output VMEM stores.
Some copypasta may have stuck in the code.
This was left on false by mistake.
Totals (GFX10):
Code Size:
254939248 ->
254896008 (-0.02 %) bytes
Totals from affected shaders (GFX10):
VGPRS: 16196 -> 16212 (0.10 %)
Code Size:
1126332 ->
1083092 (-3.84 %) bytes
Max Waves: 2336 -> 2334 (-0.09 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 17:36:07 +0000 (18:36 +0100)]
aco: Fix handling of tess factors.
There is no need to check whether they are written using indirect
indices, because all tess factors should be written to VMEM only
at the end of the shader.
No pipeline db changes.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 17:14:43 +0000 (18:14 +0100)]
aco: Extract tcs_driver_location_matches_api_mask to separate function.
Also clear up should_write_tcs_output_to_lds a little bit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 12 Mar 2020 16:20:16 +0000 (17:20 +0100)]
aco: Create null exports in instruction selection instead of assembler.
This allows the passes after isel to assume that the exports are
always correct, and also allows to schedule these null exports later.
Additionally, it ensures that the correct exec mask is used for
these exports.
Totals from affected shaders (GFX10):
SGPRS: 84224 -> 84344 (0.14 %)
VGPRS: 23088 -> 23076 (-0.05 %)
Code Size: 882892 -> 894368 (1.30 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Danylo Piliaiev [Fri, 13 Mar 2020 14:06:07 +0000 (16:06 +0200)]
nir: Fix breakage of foreach_list_typed_safe assumptions in loop unrolling
foreach_list_typed_safe works with assumption that even if current node
becomes invalid, the next will be still valid.
However process_loops broke this assumption, because during iteration
when immediate child is unrolled - not only current node could be removed
but also the one after it.
This doesn't cause issues now but it will cause issues when undefined
behaviour in foreach* macros is fixed.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4189>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4189>
Pierre-Eric Pelloux-Prayer [Fri, 27 Mar 2020 19:42:29 +0000 (20:42 +0100)]
radeon: switch to 3-spaces style
For clang-format config see the previous commit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4319>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4319>
Pierre-Eric Pelloux-Prayer [Fri, 27 Mar 2020 18:32:38 +0000 (19:32 +0100)]
radeonsi: switch to 3-spaces style
Generated automatically using clang-format and the following config:
AlignAfterOpenBracket: true
AlignConsecutiveMacros: true
AllowAllArgumentsOnNextLine: false
AllowShortCaseLabelsOnASingleLine: false
AllowShortFunctionsOnASingleLine: false
AlwaysBreakAfterReturnType: None
BasedOnStyle: LLVM
BraceWrapping:
AfterControlStatement: false
AfterEnum: true
AfterFunction: true
AfterStruct: false
BeforeElse: false
SplitEmptyFunction: true
BinPackArguments: true
BinPackParameters: true
BreakBeforeBraces: Custom
ColumnLimit: 100
ContinuationIndentWidth: 3
Cpp11BracedListStyle: false
Cpp11BracedListStyle: true
ForEachMacros:
- LIST_FOR_EACH_ENTRY
- LIST_FOR_EACH_ENTRY_SAFE
- util_dynarray_foreach
- nir_foreach_variable
- nir_foreach_variable_safe
- nir_foreach_register
- nir_foreach_register_safe
- nir_foreach_use
- nir_foreach_use_safe
- nir_foreach_if_use
- nir_foreach_if_use_safe
- nir_foreach_def
- nir_foreach_def_safe
- nir_foreach_phi_src
- nir_foreach_phi_src_safe
- nir_foreach_parallel_copy_entry
- nir_foreach_instr
- nir_foreach_instr_reverse
- nir_foreach_instr_safe
- nir_foreach_instr_reverse_safe
- nir_foreach_function
- nir_foreach_block
- nir_foreach_block_safe
- nir_foreach_block_reverse
- nir_foreach_block_reverse_safe
- nir_foreach_block_in_cf_node
IncludeBlocks: Regroup
IncludeCategories:
- Regex: '<[[:alnum:].]+>'
Priority: 2
- Regex: '.*'
Priority: 1
IndentWidth: 3
PenaltyBreakBeforeFirstCallParameter: 1
PenaltyExcessCharacter: 100
SpaceAfterCStyleCast: false
SpaceBeforeCpp11BracedList: false
SpaceBeforeCtorInitializerColon: false
SpacesInContainerLiterals: false
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4319>
Pierre-Eric Pelloux-Prayer [Fri, 27 Mar 2020 19:33:13 +0000 (20:33 +0100)]
radeon: fix includes
And add required forward declarations.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4319>
Pierre-Eric Pelloux-Prayer [Fri, 27 Mar 2020 19:34:09 +0000 (20:34 +0100)]
ddebug: add missing forward declaration
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4319>
Daniel Stone [Tue, 28 Jan 2020 12:47:20 +0000 (12:47 +0000)]
meson: Add VS 4624 warning exclusion to remove piles of LLVM warnings
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4343>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4343>
Erik Faye-Lund [Tue, 14 Jan 2020 10:56:13 +0000 (11:56 +0100)]
meson: disable some more warnings on msvc
These warnings triggers for me, and they are harmless as-is. Let's
disable them to avoid hiding actually scary warnings.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4343>
Daniel Stone [Mon, 30 Mar 2020 09:16:18 +0000 (10:16 +0100)]
CI: Avoid htz4 runner for VS2019
The htz4 runner needs to be updated in order for our support binaries
like Chocolatey to work. Temporarily restrict jobs to the EC2 runner
until this has happened.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4371>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4371>
Eric Engestrom [Fri, 27 Mar 2020 23:28:33 +0000 (00:28 +0100)]
intel: drop unused include directories
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Eric Engestrom [Tue, 5 Mar 2019 16:55:02 +0000 (16:55 +0000)]
vulkan: drop unused include directories
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Eric Engestrom [Tue, 5 Mar 2019 16:21:47 +0000 (16:21 +0000)]
meson: inline `inc_common`
Let's make it clear what includes are being added everywhere, so that
they can be cleaned up.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Eric Engestrom [Tue, 5 Mar 2019 10:40:51 +0000 (10:40 +0000)]
meson: use existing variables in inc_common
Stepping stone to make review of the next commits easier.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Vinson Lee [Sat, 28 Mar 2020 02:56:10 +0000 (19:56 -0700)]
mesa: Change _mesa_exec_malloc argument type.
Fix build error.
In file included from ../src/mesa/x86/rtasm/x86sse.c:7:0:
../src/mesa/main/execmem.h:31:19: error: unknown type name ‘GLuint’; did you mean ‘uint’?
_mesa_exec_malloc(GLuint size);
^~~~~~
uint
Suggested-by: Marek Olšák <marek.olsak@amd.com>
Fixes: e5339fe4a47c ("Move compiler.h and imports.h/c from src/mesa/main into src/util")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4361>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4361>
Michel Dänzer [Mon, 23 Mar 2020 17:16:07 +0000 (18:16 +0100)]
gitlab-ci: Update to current templates
The .fdo.container-ifnot-exists template has been replaced by
.fdo.container-build.
We need to include "debian/" in FDO_REPO_SUFFIX for now, we can drop it
for individual images when their tags are bumped if we want.
Miscellaneous other goodies this gets us:
* The templates now add some labels to images which may be useful for
garbage collecting unused tags in the future.
* The templates now copy the current tag from the main project
registry to the forked project's if it already exists in the latter
but points to a different image hash. This will avoid false failures
(or passes) due to using the wrong image.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4286>
Tomeu Vizoso [Fri, 27 Mar 2020 14:31:45 +0000 (15:31 +0100)]
Revert "gitlab-ci: Disable jobs for Collabora's LAVA lab"
Lab is online again.
This reverts commit
1351ee03352b12690233a73e160f92da2edecf16.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4347>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4347>
Marek Olšák [Fri, 20 Mar 2020 21:34:15 +0000 (17:34 -0400)]
radeonsi/gfx10: fix descriptors and compute registers for compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:35:56 +0000 (17:35 -0400)]
radeonsi/gfx10: fix the wave size for compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:34:59 +0000 (17:34 -0400)]
radeonsi/gfx10: user correct ACQUIRE_MEM packet for compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:30:33 +0000 (17:30 -0400)]
radeonsi/gfx10: fix ds.ordered.add intrinsic for compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:45:17 +0000 (17:45 -0400)]
radeonsi/gfx10: don't use NGG culling if compute-based culling is used
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Sat, 21 Mar 2020 01:12:38 +0000 (21:12 -0400)]
radeonsi: add num_vbos_in_user_sgprs into the shader cache key
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 22:20:52 +0000 (18:20 -0400)]
radeonsi: always create wait_mem_scratch for compute-based culling
used by the primitive restart emulation
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 22:02:20 +0000 (18:02 -0400)]
radeonsi: set amdgpu-gds-size for mode == 2 of compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:32:11 +0000 (17:32 -0400)]
radeonsi: fix incorrect ordered_wave_id initilization for compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Marek Olšák [Fri, 20 Mar 2020 21:30:10 +0000 (17:30 -0400)]
radeonsi: remove obsolete TODO comment related to compute-based culling
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4269>
Vasily Khoruzhick [Mon, 23 Mar 2020 06:12:06 +0000 (23:12 -0700)]
lima: Implement lima_texture_subdata
We can avoid intermediate copy if we implement it ourselves.
Improves x11perf -shmput500 from 199.0/s to 283.0/s
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4281>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4281>
Rob Clark [Fri, 27 Mar 2020 23:34:27 +0000 (16:34 -0700)]
gitlab-ci: disable vs2019 build
Seems to be broken atm and blocking merging anything.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 26 Mar 2020 17:45:54 +0000 (10:45 -0700)]
freedreno/ir3/ra: re-work a6xx merged register file conflicts
In particular setup the full/half conflicts first. This avoids spurious
conflicts that where causing RA to place vecN half-regs poorly.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 26 Mar 2020 17:25:04 +0000 (10:25 -0700)]
freedreno/ir3/ra: split building regs/classes and conflicts
Split out the construction of registers and classes (which is the same
on all gens) from setting up conflicts. Prep to re-work how we setup
conflicts on a6xx+ which merged half/full register file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Mon, 23 Mar 2020 17:25:38 +0000 (10:25 -0700)]
freedreno/ir3/ra: pick higher numbered scalars in first pass
Since we are re-assigning the scalars anyways in the second pass, assign
them to the highest free reg in the first pass (rather than lowest) to
allow packing vecN regs as low as possible.
Note this required some changes specifically for tex instructions with a
single component writemask that is not necessarily .x, as previously
these would get assigned in the first RA pass, and since they are still
scalar, we'd end up w/ some r47.* and other similarly way-to-high
assignments after the 2nd pass.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 20 Mar 2020 16:14:36 +0000 (09:14 -0700)]
freedreno/ir3/ra: compute register target from liveranges
Using the output of the first pass isn't ideal, as it can bake in the
losses from fragmentation which the scalar pass is intended to fill in.
This gets worse when we start using "vectorish" instructions, due to
higher use of vecN values.
Instead, we can just use the outputs of the liveness analysis to get a
more accurate # of maximum live values at any point.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sun, 22 Mar 2020 19:37:12 +0000 (12:37 -0700)]
freedreno/ir3/ra: fix array liveranges
Fixes: 1b658533e11 ("freedreno/ir3: extend liverange of arrays")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 21:44:44 +0000 (14:44 -0700)]
freedreno/ir3/ra: add def/use iterators
Decouple the messy logic of figuring out vreg names defined/used by an
instruction from the logic of what to do about it by introducing
iterators. There is still *some* array vs ssa special casing in
ra_block_compute_live_ranges(), but less than before. And this will
avoid introducing a second copy of the def/use logic in a following
patch which uses the liveranges to calculate the maximum # of live
values (which is the optimal target for max physical register window
to round-robin within).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 20:29:37 +0000 (13:29 -0700)]
freedreno/ir3/ra: drop extending output live-ranges
This is no longer needed as we create meta:collect instructions in the
end block, which achieves the same result.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:25:36 +0000 (11:25 -0700)]
freedreno/ir3/ra: add helper to map name to array
For vreg names that refer to arrays rather than SSA values, this is the
counterpart to name_to_instr().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:07:35 +0000 (11:07 -0700)]
freedreno/ir3/ra: fix target register calculation
Account for the # of regs an instruction writes, and fix an off-by-one.
(We are about to replace this with calculating the register target using
the live-ranges, but in debugging that it was useful to assert() if it
chose a higher target.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 19 Mar 2020 23:29:57 +0000 (16:29 -0700)]
freedreno/ir3/ra: add helper to map name to instruction
Extract out a helper from the select_reg callback. And include all the
instructions in the hashtable, not just SFU. This will be useful in the
following commits.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 17:33:48 +0000 (10:33 -0700)]
freedreno/ir3/ra: split-up
Split out regset and shared header, since the RA pass is already getting
large-ish.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Mon, 23 Mar 2020 15:58:07 +0000 (08:58 -0700)]
freedreno/ir3/ra: add debug option for RA debug msgs
Similar to the debug switch for sched debug msgs
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 6 Mar 2020 16:46:43 +0000 (08:46 -0800)]
freedreno/ir3: convert debug bitfield to BITFIELD_BIT()
(Little more verbose than the kernel's BIT())
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 6 Mar 2020 16:43:35 +0000 (08:43 -0800)]
freedreno/ir3: reformat disasm output
In particular, make sure we see all the shader-db stats. The format
(order) is the sameish, except split across multiple lines to make it
easier to read.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 20:13:34 +0000 (13:13 -0700)]
freedreno/ir3: fix bogus register footprint with tess/gs
When we have a tess or gs stage, VS outputs aren't normal varyings, so
regid is r63.x.. we shouldn't extend our registerfootprint to 64!
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Thu, 12 Mar 2020 21:16:38 +0000 (14:16 -0700)]
freedreno/ir3: remove unused helper
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Fri, 20 Mar 2020 18:50:46 +0000 (11:50 -0700)]
freedreno/ir3: add bary_ij as src for meta:tex_prefetch
This way RA doesn't have to special case it in use/def accounting..
This gets rid of an extra level of split/collect, which shouldn't be
needed. And interferes with scheduler trying to put tex-prefetches
after inputs but before other instructions. (Otherwise it would have
to figure out which split/collects need to go before the tex-prefetch)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 18:06:59 +0000 (11:06 -0700)]
freedreno/ir3: small cleanup and comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Rob Clark [Sat, 21 Mar 2020 16:49:27 +0000 (09:49 -0700)]
freedreno/a6xx: register update
No functional change, and this register isn't used in userspace. Just
syncing from envytools tree to eliminate the delta.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4272>
Daniel Stone [Fri, 27 Mar 2020 21:20:11 +0000 (21:20 +0000)]
CI: Disable Panfrost Mali-T820 jobs
The BayLibre T820 runners appear to be unhealthy.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4359>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4359>
Marek Olšák [Thu, 26 Mar 2020 03:47:36 +0000 (23:47 -0400)]
util: remove duplicated MALLOC_STRUCT and CALLOC_STRUCT
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 03:44:59 +0000 (23:44 -0400)]
util: don't include p_defines.h and u_pointer.h from gallium
It's a mess, but this is what I arrived at.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:30:55 +0000 (21:30 -0400)]
radv: stop including files from mesa/main
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:26:24 +0000 (21:26 -0400)]
util: stop including files from mesa/main
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:13:48 +0000 (21:13 -0400)]
mesa: don't use <> for including internal headers
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Marek Olšák [Thu, 26 Mar 2020 01:11:44 +0000 (21:11 -0400)]
Move compiler.h and imports.h/c from src/mesa/main into src/util
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4324>
Jesse Natalie [Tue, 17 Mar 2020 17:53:33 +0000 (10:53 -0700)]
wgl: use gldrv.h instead of stw_icd.h
Now that we have the official header, let's use that instead of
stw_icd.h.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Jesse Natalie [Tue, 17 Mar 2020 17:53:33 +0000 (10:53 -0700)]
wgl: add official gldrv.h header-file
This is the official, Microsoft-provided gldrv.h that describes the
driver-interface for OpenGL drivers on Windows.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4305>
Karol Herbst [Fri, 20 Sep 2019 18:27:20 +0000 (20:27 +0200)]
nv50, nvc0: fix must_check warning of util_dynarray_resize_bytes
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Erik Faye-Lund [Thu, 26 Mar 2020 10:50:10 +0000 (11:50 +0100)]
nv50: remove unused variable
This isn't used anymore, so let's get rid of it to silence a warning.
Fixes: c574cda3c6a ("util: Make helper functions for pack/unpacking pixel rows.")
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4330>
Lionel Landwerlin [Mon, 2 Mar 2020 12:00:55 +0000 (14:00 +0200)]
intel/perf: store the probed i915-perf version
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Mon, 2 Mar 2020 11:52:49 +0000 (13:52 +0200)]
intel/perf: document meaning of query field
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 4 Sep 2019 11:10:22 +0000 (14:10 +0300)]
intel/perf: move mdapi query definitions to their own file
Where they belong.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 4 Sep 2019 10:52:13 +0000 (13:52 +0300)]
intel/perf: break GL query stuff away
This stuff is somewhat specific to the GL extension & drivers. On
Vulkan we won't use this, it also made a rather large file.
v2: Fix Android build (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Lionel Landwerlin [Wed, 13 Nov 2019 13:21:00 +0000 (15:21 +0200)]
intel/perf: move register definition to special file
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
Andres Gomez [Sun, 8 Mar 2020 00:05:08 +0000 (02:05 +0200)]
gitlab-ci/traces: Add D3D11 sample entry for POLARIS10
v2:
- Updated traces-db commit.
- Changed the reference DXVK trace.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Fri, 20 Mar 2020 18:26:48 +0000 (20:26 +0200)]
gitlab-ci: add Wine and DXVK env variables to Vulkan's tracie runner
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Wed, 18 Mar 2020 14:39:49 +0000 (16:39 +0200)]
gitlab-ci: replay apitrace traces in headless mode
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Sun, 8 Mar 2020 21:40:04 +0000 (23:40 +0200)]
gitlab-ci: add apitrace's DXGI traces support
v2:
- Pass the whole retrace command for apitrace traces (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Sun, 8 Mar 2020 21:37:23 +0000 (23:37 +0200)]
gitlab-ci: add Wine, win64's apitrace and DXVK to the Vulkan testing container
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Andres Gomez [Thu, 26 Mar 2020 21:00:15 +0000 (23:00 +0200)]
gitlab-ci: Don't use buster-backports packages by default for x86_test-vk
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
Daniel Stone [Fri, 27 Mar 2020 13:22:37 +0000 (13:22 +0000)]
CI: Windows: Fix Docker tag argument inversion
docker tag takes its arguments as source and dest, not dest and source.
Went unnoticed as the host already had a tag for my image when I was
testing.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4346>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4346>
Daniel Stone [Tue, 24 Mar 2020 11:11:36 +0000 (11:11 +0000)]
CI: Add native Windows VS2019 build
Adds a native build of Mesa using Meson with the Visual Studio 2019
toolchain on a Windows host.
Though Docker is supported on Windows, Docker-in-Docker is not possible,
nor are podman and skopeo available. We handle this by creating the
container from a shell-executor Windows machine, which gives us a native
PowerShell that we can execute Docker from. This attempts to do the same
copy-from-upstream-or-create-if-not-exists optimisation as the
ci-templates do for our Linux builds, albeit open-coded in PowerShell.
The Mesa build itself is executed inside a container, using Meson and
Ninja.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Daniel Stone [Thu, 26 Mar 2020 13:01:58 +0000 (13:01 +0000)]
util/test: Use MAX_PATH on Windows
Windows provides MAX_PATH rather than PATH_MAX for the maximum allowable
path length. This is not a limit on the length of filename which can
exist on the filesystem, but a length on the length of path which can be
passed to Win32 API calls.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Fixes: f8f1413070a ("util/u_process: add util_get_process_exec_path")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Pierre-Eric Pelloux-Prayer [Thu, 26 Mar 2020 13:07:39 +0000 (14:07 +0100)]
util: fix process_test path
Make sure we only use winepath when needed.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Fixes: f8f1413070a ("util/u_process: add util_get_process_exec_path")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2690
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4304>
Tomeu Vizoso [Fri, 27 Mar 2020 08:25:17 +0000 (09:25 +0100)]
gitlab-ci: Disable jobs for Collabora's LAVA lab
The lab is going down for a few hours to upgrade the LAVA installation
to the latest stable release.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4342>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4342>
Timothy Arceri [Thu, 26 Mar 2020 01:23:23 +0000 (12:23 +1100)]
nir: fix packing of TCS varyings not read by the TES
Unlike other stages TCS outputs not read by the TES cannot always
be demoted to globals e.g. when they are read by other TCS
invocations.
We were not taking these outputs into account when packing which
could result in other outputs being assigned to the same location.
Here we make sure to gather information on these outputs and group
them together when packing.
This fixes rendering issues in QUBE 2 via Proton.
Closes: #2653
Fixes: 26aa460940f6 ("nir: rewrite varying component packing")
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Timothy Arceri [Thu, 26 Mar 2020 08:03:51 +0000 (19:03 +1100)]
glsl: fix varying packing for 64bit integers
Without this we can incorrectly end up marking things as making
use of ARB_enhanced_layouts style packing.
Cc: 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4328>
Samuel Pitoiset [Thu, 26 Mar 2020 10:40:35 +0000 (11:40 +0100)]
ac/nir: use llvm.amdgcn.rcp in ac_build_fdiv()
Instead of emitting 1.0 / x which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
No pipeline-db changes with VEGA10/LLVM 9.
pipeline-db (VEGA10/LLVM 10):
Totals from affected shaders:
SGPRS: 6672 -> 6672 (0.00 %)
VGPRS: 6652 -> 6652 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size: 561780 -> 561692 (-0.02 %) bytes
Max Waves: 1043 -> 1043 (0.00 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 84608 -> 83768 (-0.99 %)
VGPRS: 106768 -> 106636 (-0.12 %)
Spilled SGPRs: 1625 -> 1713 (5.42 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
10850936 ->
10726712 (-1.14 %) bytes
Max Waves: 3152 -> 3180 (0.89 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Samuel Pitoiset [Wed, 25 Mar 2020 17:17:38 +0000 (18:17 +0100)]
ac/nir: use llvm.amdgcn.rsq for nir_op_frsq
Instead of emitting 1.0 / sqrt(x) which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
pipeline-db (VEGA10/LLVM 9):
Totals from affected shaders:
SGPRS: 16872 -> 16864 (-0.05 %)
VGPRS: 15320 -> 15464 (0.94 %)
Spilled SGPRs: 2021 -> 2133 (5.54 %)
Code Size:
1915464 ->
1917476 (0.11 %) bytes
Max Waves: 641 -> 639 (-0.31 %)
pipeline-db (VEGA10/LLVM 10):
Totals from affected shaders:
SGPRS: 43936 -> 44120 (0.42 %)
VGPRS: 41776 -> 41972 (0.47 %)
Spilled SGPRs: 875 -> 875 (0.00 %)
Code Size:
4468164 ->
4468120 (-0.00 %) bytes
Max Waves: 2412 -> 2414 (0.08 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 60096 -> 60096 (0.00 %)
VGPRS: 63552 -> 63648 (0.15 %)
Spilled SGPRs: 6135 -> 6117 (-0.29 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
6252996 ->
6249772 (-0.05 %) bytes
Max Waves: 2324 -> 2337 (0.56 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
Samuel Pitoiset [Wed, 25 Mar 2020 17:17:06 +0000 (18:17 +0100)]
ac/nir: use llvm.amdgcn.rcp for nir_op_frcp
Instead of emitting 1.0 / x which includes a slow division that
LLVM doesn't always optimize even if the metadata is correctly set.
pipeline-db (VEG10/LLVM 9):
Totals from affected shaders:
SGPRS: 50384 -> 50312 (-0.14 %)
VGPRS: 42572 -> 42696 (0.29 %)
Spilled SGPRs: 1372 -> 1372 (0.00 %)
Code Size:
5692040 ->
5691428 (-0.01 %) bytes
Max Waves: 3954 -> 3951 (-0.08 %)
pipeline-db (VEG10/LLVM 10):
Totals from affected shaders:
SGPRS: 78512 -> 78464 (-0.06 %)
VGPRS: 62408 -> 62484 (0.12 %)
Spilled SGPRs: 1502 -> 1502 (0.00 %)
Code Size:
8106188 ->
8103372 (-0.03 %) bytes
Max Waves: 7759 -> 7753 (-0.08 %)
pipeline-db (VEGA10/LLVM 11 -
92744f62478):
Totals from affected shaders:
SGPRS: 112760 -> 113232 (0.42 %)
VGPRS: 111132 -> 110568 (-0.51 %)
Spilled SGPRs: 5870 -> 5940 (1.19 %)
Spilled VGPRs: 650 -> 652 (0.31 %)
Code Size:
11887232 ->
11561744 (-2.74 %) bytes
Max Waves: 8964 -> 9015 (0.57 %)
LLVM 11 (master) is more affected than previous versions, but
based on the small impact with LLVM 9/10, I decided to emit it
unconditionally.
Cc: 20.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4326>
H.J. Lu [Tue, 18 Feb 2020 22:05:39 +0000 (14:05 -0800)]
x86: Add ENDBR at function entries
Intel Control-flow Enforcement Technology (CET):
https://software.intel.com/en-us/articles/intel-sdm
contains shadow stack (SHSTK) and indirect branch tracking (IBT).
When IBT is enabled, all indirect branch targets must start with
ENDBR instruction which is a NOP on non-CET processors.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2538
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3865>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3865>
Marek Olšák [Thu, 26 Mar 2020 04:30:53 +0000 (00:30 -0400)]
mesa: try to fix the android build
Fixes: 8a3e2cd9b26
Closes: #2685
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4325>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4325>
projects / mesa.git / log