gallium: make pipe_context::begin_query return a boolean

GL_AMD_performance_monitor must return an error when a monitoring
session cannot be started.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>

gallium: replace pipe_driver_query_info::max_value by a union

This allows queries to return different numeric types.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>

gallium: add new numeric types to pipe_query_result

This will be used by GL_AMD_performance_monitor.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>

gallium: add new fields to pipe_driver_query_info

According to the spec of GL_AMD_performance_monitor, valid type values
returned are UNSIGNED_INT, UNSIGNED_INT64_AMD, PERCENTAGE_AMD, FLOAT.
This also introduces the new field group_id in order to categorize
queries into groups.

v2: add PIPE_DRIVER_QUERY_TYPE_BYTES

v3: fix incorrect query type for radeon and svga drivers

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>

gallium: add pipe_screen::get_driver_query_group_info

Driver queries are organized as a single hierarchy where queries are
categorized into groups. Each group has a list of queries and a maximum
number of queries that can be sampled. The list of available groups can
be obtained using pipe_screen::get_driver_query_group_info.

This will be used by GL_AMD_performance monitor.

v2: add group type (CPU/GPU)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>

mesa: fix shininess check for ffvertex_prog v2

Switch to using VERT_BIT_GENERIC macro, as varying_vp_inputs is a
bitmask.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

i965/aa: fixing anti-aliasing bug for thinnest width lines - GEN7

On SNB and IVB hw, for 1 pixel line thickness or less,
the general anti-aliasing algorithm give up - garbage line is generated.
Setting a Line Width of 0.0 specifies the rasterization of
the “thinnest” (one-pixel-wide), non-antialiased lines.
Lines rendered with zero Line Width are rasterized using
Grid Intersection Quantization rules as specified
by bspec section 6.3.12.1 Zero-Width (Cosmetic) Line Rasterization.

v2: Daniel Stone: Fix = used instead of == in an if-statement.
v3: Ian Romanick: Use "._Enabled" flag insteed ".Enabled".
    Add code comments. re-word wrap the commit message.
    Add a complete bugzillia list.
    Improve the hardcoded values to produce better results.
v4: Matt Turner: typo fixes and adjust <= 1.49 to become < 1.5

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28832
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=9951
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27007
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60797
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15006

Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Marius Predut <marius.predut@intel.com>

i965: Fix missing type in local variable declaration.

Trivial.  Fixes the following compiler warning (from GCC 5.1.0):

brw_context.c:629:10: warning: type defaults to ‘int’ in declaration
of ‘simd_size’ [-Wimplicit-int]

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Use same type for immediate, for compaction.

i965/aa: fixing anti-aliasing bug for thinnest width lines - GEN6

On SNB and IVB hw, for 1 pixel line thickness or less,
the general anti-aliasing algorithm give up - garbage line is generated.
Setting a Line Width of 0.0 specifies the rasterization of
the “thinnest” (one-pixel-wide), non-antialiased lines.
Lines rendered with zero Line Width are rasterized using
Grid Intersection Quantization rules as specified
by bspec section 6.3.12.1 Zero-Width (Cosmetic) Line Rasterization.

v2: Daniel Stone: Fix = used instead of == in an if-statement.
v3: Ian Romanick: Use "._Enabled" flag insteed ".Enabled".
    Add code comments. re-word wrap the commit message.
    Add a complete bugzillia list.
    Improve the hardcoded values to produce better results.
v4: Matt Turner: typo fixes and adjust <= 1.49 to become < 1.5

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28832
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=9951
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27007
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60797
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15006

Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Marius Predut <marius.predut@intel.com>

i965: Remove end-of-thread SEND alignment code.

This was present in Eric's initial implementation of the compaction code
for Sandybridge (commit 077d01b6). There is no documentation saying this
is necessary, and removing it causes no regressions in piglit on any
platform.

i965: Add XRGB8888 format to intel_screen_make_configs

Some application, such as drm backend of weston, uses XRGB8888 config as
default. i965 doesn't provide this format, but before commit 65c8965d,
the drm platform of EGL takes ARGB8888 as XRGB8888. Now that commit
65c8965d makes EGL recognize format correctly so weston won't start
because it can't find XRGB8888. Add XRGB8888 format to i965 just as
other drivers do.

Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89689
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

nir: add nir_array.h to the sources list

Otherwise `make distcheck' will fail.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

glsl: don't lower fragdata array if the output data types don't match

Commit 7e414b58640aee6e243d337e72cea290c354f632 broke the gl_FragData array
into separate gl_FragData[i] variables, so drivers can eliminate useless
writes to gl_FragData improving their performance.

The problem occurs when GLSL IR code is linked in the following case:

* The FS output variable base data type does not match gl_FragData one (float
  vector)
* The FS output variable is replaced by gl_out_FragDataX because of commit
  7e414b58640aee6 with X from 0 to GL_MAX_DRAW_BUFFERS.

Then the FS output variable base data type is lost in the resulting GLSL IR,
making that the driver does a wrong assignment to gl_out_FragData components
because of unmatching data types.

This patch reverts the fragdata array lowering when the output var base data type
doesn't match gl_out_FragData, i.e., when output variable base data type is
not a float or a float vector.

This patch fixes 250 dEQP tests (tested in an Intel Haswell machine)

dEQP-GLES3.functional.fragment_out.random.* (22 failed tests)
dEQP-GLES3.functional.fragment_out.array.uint.* (120 failed tests)
dEQP-GLES3.functional.fragment_out.array.int.* (108 failed tests)

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/skl: Align compressed textures to four times the block size

On Skylake it is possible to choose your own alignment values for
compressed textures but they are expressed as a multiple of the block
size. The minimum alignment value we can use is 4 so we effectively
have to align to 4 times the block size. This patch makes it initially
set mt->align_[wh] to the large alignment value and then later divides
it by the block size so that it can be uploaded as part of the surface
state.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

egl: image_dma_buf_export - use KHR 64-bit type

After talking to Jon Leech he suggested this should be fine.

update spec to the version in the registry.

Signed-off-by: Dave Airlie <airlied@redhat.com>

glapi/es3.1: Add support for GLES versions > 3.0

Make the checks in the Python script and the generated code more generic
to support arbitrary GLES versions >= 2.0.

The updated dispatch_sanity.cpp test discovered this problem.  Without
this, the next patch would erroneously enable GLES 3.1 functions in GLES
2.0 and GLES 3.0.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

glsl/es3.1: Allow misc ARB_gpu_shader5 built-ins in GLSL ES 3.10

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl/es3.1: Allow textureGather and textureGatherOffset in GLSL ES 3.10

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl/es3.1: Allow enhnaced packing functions in GLSL ES 3.10

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl/es3.1: Allow interger mix built-ins in GLSL ES 3.10

v2: Add missing lexer support.  Noticed by Tapani.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> [v1]

glsl/es3.1: Allow separate shader objects in GLSL ES 3.10

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl/es3.1: Allow explicit uniform locations in GLSL ES 3.10

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl/es3.1: Allow 3.10 ES shaders in a GLES 3.1 context

Currently no 3.10 ES features (beyond 3.00 ES) are enabled.  That will
come later.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

mesa/es3.1: Add _mesa_is_gles31 helper

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

docs/GL3: Update GLES 3.1 dependencies

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: Add glsl_parser_state::has_atomic_counters helper

v2: Change GL version from 400 to 420.  Noticed by Tapani and Ilia.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

mesa: Use bool in _mesa_is_ helpers instead of GLboolean

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

mesa: Trivial coding standards cleanups

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

mesa: Use bool instead of GLboolean

v2: Squash in whitespace fixes.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

glsl: Silence unused parameter warnings

I opted to comment out "last_field" because it was not obvious what the
meaning of the dangling bool would be.  For the other parameters, the
meaning was more intuitive without the name.

link_uniform_blocks.cpp:70:65: warning: unused parameter 'name' [-Wunused-parameter]
    virtual void enter_record(const glsl_type *type, const char *name,
                                                                 ^
link_uniform_blocks.cpp:77:65: warning: unused parameter 'name' [-Wunused-parameter]
    virtual void leave_record(const glsl_type *type, const char *name,
                                                                 ^
link_uniform_blocks.cpp:93:62: warning: unused parameter 'record_type' [-Wunused-parameter]
                             bool row_major, const glsl_type *record_type,
                                                              ^
link_uniform_blocks.cpp:94:34: warning: unused parameter 'last_field' [-Wunused-parameter]
                             bool last_field)
                                  ^
link_uniforms.cpp:547:65: warning: unused parameter 'name' [-Wunused-parameter]
    virtual void enter_record(const glsl_type *type, const char *name,
                                                                 ^
link_uniforms.cpp:556:65: warning: unused parameter 'name' [-Wunused-parameter]
    virtual void leave_record(const glsl_type *type, const char *name,
                                                                 ^
link_uniforms.cpp:567:34: warning: unused parameter 'last_field' [-Wunused-parameter]
                             bool last_field)
                                  ^

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Dylan Baker <baker.dylan.c@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

mesa: Restore functionality to dispatch sanity test

Along with a couple secondary goals, the dispatch sanity test had two
major, primary goals.

1. Ensure that all functions part of an API version are set in the
   dispatch table.

2. Ensure that functions that cannot be part of an API version are not
   set in the dispatch table.

Commit 4bdbb58 removed the tests ability to fulfill either of its
primary goals by removing anything that used _mesa_generic_nop().  It
seems like the problem on Windows could have been resolved by adding the
NULL context pointer check from nop_handler to _mesa_generic_nop().
There is, however, some debugging benefit to actually getting the
(supposed) function name logged in the "unsupported function called"
message.

The preceding commit added a function, _glapi_new_nop_table, that
allocates a table of per-entry point no-op functions.  Restore the
ability to actually validate the sanity of the dispatch table by using
_glapi_new_nop_table.

Previous to this commit removing a function from one of the
*_functions_possible lists would not cause the test to fail.  With this
commit removing such a function will result in failure, as is expected.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

i965: Fix variable indexing of sampler arrays under non-uniform control flow.

ARB_gpu_shader5 requires sampler array indexing expressions to be
dynamically uniform, this however doesn't have any implications on the
control flow that leads to the evaluation of that expression being
uniform.  Use emit_uniformize() to obtain an arbitrary live value from
the binding table index calculation instead of assuming that the first
channel is always live.

Fixes the following Piglit test cases:
  arb_gpu_shader5/execution/sampler_array_indexing/fs-nonuniform-control-flow.shader_test
  arb_gpu_shader5/execution/sampler_array_indexing/vs-nonuniform-control-flow.shader_test

part of the series:
  http://lists.freedesktop.org/archives/piglit/2015-February/014615.html

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Fix variable indexing of UBO arrays under non-uniform control flow.

ARB_gpu_shader5 requires UBO array indexing expressions to be
dynamically uniform, this however doesn't have any implications on the
control flow that leads to the evaluation of that expression being
uniform.  Use emit_uniformize() to obtain an arbitrary live value from
the binding table index calculation instead of assuming that the first
channel is always live.

Fixes the following Piglit tests:
  arb_gpu_shader5/execution/ubo_array_indexing/fs-nonuniform-control-flow.shader_test
  arb_gpu_shader5/execution/ubo_array_indexing/vs-nonuniform-control-flow.shader_test

part of the series:
  http://lists.freedesktop.org/archives/piglit/2015-February/014616.html

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Define helper function to copy an arbitrary live component from some register.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Perform basic optimizations on the FIND_LIVE_CHANNEL opcode.

v2: Save some CPU cycles by doing 'return progress' rather than
    'depth++' in the discard jump special case.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Introduce the FIND_LIVE_CHANNEL pseudo-opcode.

This instruction calculates the index of an arbitrary channel enabled
in the current execution mask.  It's expected to be used as input for
the BROADCAST opcode, but it's implemented as a separate instruction
rather than being baked into BROADCAST because FIND_LIVE_CHANNEL has
no dependencies so it can always be CSE'ed with other instances of the
same instruction within a basic block.

v2: Whitespace fixes.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Perform basic optimizations on the BROADCAST opcode.

v2: Style fixes.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Introduce the BROADCAST pseudo-opcode.

The BROADCAST instruction picks the channel from its first source
given by an index passed in as second source.  This will be used in
situations where all channels from the same SIMD thread have to agree
on the value of something, e.g. a surface binding table index.

This is in particular the case for UBO, sampler and image arrays,
which can be indexed dynamically with the restriction that all active
SIMD channels access the same index, provided to the shared unit as
part of a single scalar field of the message descriptor.  Simply
taking the index value from the first channel as we were doing until
now is incorrect, because it might contain an uninitialized value if
the channel had previously been disabled by non-uniform control flow.

v2: Minor style fixes.  Improve commit message.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Keep track of the early_fragment_tests flag in gl_shader.

And rename _mesa_glsl_parse_state::early_fragment_tests to
fs_early_fragment_tests for consistency with other FS-specific flags in the
same struct.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Error out on invalid uses of the early_fragment_tests layout qualifier.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Forbid use of image qualifiers in declarations of type other than image.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Split off memory qualifiers from storage qualifiers.

Image memory qualifiers (coherent, volatile, restrict, readonly and writeonly)
follow slightly different rules from storage qualifiers, e.g. the uniqueness
rule doesn't apply.  Make them a separate non-terminal.

Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Forbid opaque variables as operands of the ternary operator.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Update image unit state when glBindImageTexture is called with texture=0.

There's no indication in the spec that the image unit state other than the
bound texture object shouldn't be updated when glBindImageTexture() is called
passing the zero texture as argument.  It's very unlikely that any application
would ever have relied on this, but it's easy to get right, and it fixes the
"state" ARB_shader_image_load_store piglit test.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Initialize image units to default state on context creation.

This is the required initial image unit state according to "Table 23.45. Image
State (state per image unit)" of the OpenGL 4.3 specification.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Implement image uniform queries.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Validate original image internal format rather than derived mesa format.

This matches what _mesa_BindImageTextures() does.  The derived image format
(gl_texture_image::TexFormat) isn't necessarily equivalent to the internal
format of the texture image.  If a forbidden internal format has been
specified we need to mark the image unit as invalid as required by the spec,
regardless of the derived format.  Fixes the "invalid"
ARB_shader_image_load_store piglit test.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Call _mesa_test_texobj_completeness() before using _MaxLevel in image validation.

gl_texture_object::_MaxLevel doesn't have any meaningful value until
_mesa_test_texobj_completeness() has been run.  Fixes the "level"
ARB_shader_image_load_store piglit test.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Add support for binding a buffer texture to a shader image unit.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Add extern "C" guards to shaderimage.h to allow inclusion from C++ code.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Export shader image format to mesa format conversion function.

This function will be useful for back-ends to translate an image internal
format as specified in GLSL code into a mesa format.

Reviewed-by: Matt Turner <mattst88@gmail.com>

swrast: Fix rgba_draw_pixels with GL_COLOR_INDEX

When we implemented the format conversion rewrite we forgot to handle
GL_COLOR_INDEX here, which needs special handling.

Fixes the following piglit test:
bin/gl-1.0-drawpixels-color-index -auto -fbo

Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90213

Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: Add memory fence opcode.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Add typed surface access opcodes.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Add untyped surface write opcode.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Reorder sources of the untyped atomic opcode.

This is consistent with the untyped surface read opcode.  From now on
all typed and untyped surface access opcodes will follow the same
pattern: src[0] will be the message payload, src[1] will be the
surface index and src[2] will be a control immediate (atomic operation
for atomic opcodes and number of vector components for surface read
and write opcodes).

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Pass the number of components as a source of the untyped surface read opcode.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Add support for untyped surface message sends from GRF.

This doesn't actually enable untyped surface message sends from GRF
yet, the upcoming atomic counter and image intrinsic lowering code
will.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Don't request untyped atomic writeback message if the destination is null.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Simplify generator code for untyped surface messages.

The generate_untyped_*() methods do nothing useful other than calling
the corresponding function from brw_eu_emit.c.  The calls to
brw_mark_surface_used() will go away too in a future commit.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix the untyped surface opcodes to deal with indirect surface access.

Change brw_untyped_atomic() and brw_untyped_surface_read() to take the
surface index as a register instead of a constant and to use
brw_send_indirect_message() to emit the indirect variant of send with
a dynamically calculated message descriptor.  This will be required to
support variable indexing of image arrays for
ARB_shader_image_load_store.

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

ilo: use ilo_image exclusively in core

Initialize ilo_view_surface and ilo_zs_surface from ilo_image instead of
ilo_texture.

ilo: add ilo_image_can_enable_aux()

It replaces ilo_texture_can_enable_hiz().

ilo: make ilo_image more self-contained

Add depth0, sample_count, and scanout to ilo_image.

ilo: add ilo_image_init_for_imported()

It replaces ilo_image_update_for_imported_bo() and enables more error
checkings for imported textures.

ilo: prepare for image init for imported bo

Refactoring in prepraration for ilo_image_init_for_imported().

ilo: constify ilo_image_params

Make ilo_image_params const in functions that do not modify it.

ilo: improve readability of ilo_image

Improve docs, rename struct fields, and reorder walk types.  No real changes.

ilo: move command builder to core

ilo: move ilo_state_3d* to core

ilo state structs (struct ilo_xxx_state) are moved as well.

ilo: add ilo_buffer.h to core

Rename the original ilo_buffer to ilo_buffer_resource to avoid name conflict.

ilo: move BOs from ilo_texture to ilo_image

We want to work with ilo_image instead of ilo_texture in core.

ilo: move ilo_layout.[ch] to core as ilo_image.[ch]

Move files and s/layout/image/.

ilo: add ilo_format.[ch] to core

The original ilo_format.[ch] are removed.

ilo: add ilo_fence.h to core

Implement pipe_fence_handle on top of ilo_fence.

ilo: add ilo_dev_init() to core

Move init_dev() from ilo_screen.c to core.

ilo: rename ilo_dev_info to ilo_dev

With intel_winsys being embedded in it, drop the "_info" suffix.

ilo: move intel_winsys to ilo_dev_info

We want to use ilo_dev_info instead of ilo_screen in core.

ilo: add ilo_dev.h to core

Move what are remaining in ilo_common.h (that is, ilo_dev_*) to ilo_dev.h.

ilo: add ilo_debug.[ch] to core

They consist of the debug helpers that used to live in ilo_common.h and
ilo_screen.c.

ilo: add ilo_core.h to core

ilo_core.h includes the common gallium headers that were included in
ilo_common.h.

ilo: move intel_winsys.h to core

Add a new subdirectory and start moving files that do not depend on
ilo_screen/ilo_context to it.

i965: Upload atomic buffer state for compute shaders

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Emit MEDIA_STATE_FLUSH after WALKER

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Implement brw_emit_gpgpu_walker

Tested on Ivybridge, Haswell and Broadwell.

v2:
 * Use SET_FIELD. (Ken)
 * Use simd_size / 16 to support SIMD8/16/32. Ken suggested
   that we might be able to do it arithmetically rather than just
   supporting SIMD8 and SIMD16 with a conditional.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/state: Emit pipeline select when changing pipelines

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Implement DispatchCompute() back-end

brw_emit_gpgpu_walker will be implemented in a subsequent patch.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

main/cs: Implement front end code for glDispatchCompute().

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa/cs: Add DispatchCompute() to driver function table.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Emit state base address

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Add CS shader time support

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Upload brw_cs_state

v3:
 * Add defines. Misc cleanup suggestions. (Ken)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Support CS program precompile

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add brw_setup_tex_for_precompile. Use in VS, GS & FS.

Suggested-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Emit compute shader code and upload programs

v2:
 * Don't bother checking for 'gen > 5' (krh)
 * Populate sampler data in key (krh)

v3:
 * Drop no8 support, and simplify code in several places (Ken)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Set invocation counts based on max_cs_threads

For ES, we set the max counts based on SIMD8, which is currently
accurate.

For desktop GL, we set the max counts based on SIMD16, which can fail
in some cases where a SIMD16 program is not currently supported.
Therefore, this value is not currently accurate, but will work fine in
many cases, and lets us run more test cases. Eventually we want to
always be able to generate a SIMD16 program.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/cs: Add max_cs_threads

Add values for gen7 & gen8. These are the number threads in a
subslice.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove comment about chv device numbers being preliminary

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Support compute programs in fs_visitor

v2:
 * Clean out some unneeded code copied from run_fs (krh)
 * Always use NIR
 * Split shader time out into a separate commit

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>