broadcom/vc5: Drop padding bits from the texture shader state's address.

broadcom/vc5: Drop alignment bits from texture P1's address.

broadcom/vc5: Drop alignment bits from Z/S rendering mode config address.

Improves CLIF dumping output.

broadcom/xml: Fix address packing for address with >= 8 alignment bits.

We were handing the intra-byte padding fine, but with a 24-bit address
(bottom 8 bits implied 0) we would end up off by 8 bytes in our shift,
impacting vc5's load/store general packets (all other packets we have had
<8 bits of padding).

broadcom/clif: Print out the contents of the generic tile list.

This is the real meat of the RCL, so let's get it printed again.

broadcom/clif: Move the CL printing part of CL dumps to a helper.

This will let me reuse the printing for processing branches to other CLs.

broadcom/vc5: Lower unpack_*_4x8 to normal math.

We only have 2x16 unpacking in our ALUs.  To enable this, we also need
lower_fdiv for its new instructions, which had been handled at a higher
level previously.

broadcom/vc5: Add PIPE_TEX_WRAP_CLAMP support for linear-filtered textures.

I already had the texture's wrapping set up to use different behavior for
nearest or linear, so we just needed to saturate the coordinates in linear
mode to get the "proper" blend between the edge and border values.

broadcom/vc5: Disable GL_ARB_transform_feedback3.

We don't seem to have a way to generally handle gl_SkipComponents.

broadcom/vc5: Fix gl_FragCoord pixel center setup.

Fixes glsl-arb-fragment-coord-conventions.

broadcom/vc5: Always set up 1D textures as raster order.

1D is the exception to "all V3D textures are tiled", since tiling 1D
textures would just waste memory and cache space.  This ended up being a
problem once we started actually marking 1D textures as 1D instead of 2D.

broadcom/xml: Throw an #error in XML-based codegen for a >1bit bool

I've debugged two nasty errors now due to copy-and-pasting a bool type
when writing a uint field.  Make sure I don't do that again.

broadcom/vc4: Fix bool marking on Rasterizer Oversample Mode.

We don't set this field using the XML codegen, but this would help us
decode the right value in case of 16x (VG) oversampling.

broadcom/vc5: Mark lookup type as uint, not bool.

Fixes non-2D texturing.

broadcom/vc5: Fix GPU hang with no vertex elements used by the VS.

Like VC4, we need to at least have one element set up, but unlike VC4 it
seems we don't need to read it to keep the HW happy.  Fixes GPU hangs with
glsl-no-vertex-attribs.shader_test.

git_sha1_gen: create empty file in fallback path

I missed this part in my conversion, the old stream redirection meant
the file was always created.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103496
Fixes: 7088622e5fb506b64c90 "buildsys: move file regeneration logic to
       the script itself"
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

intel: common: silence compiler warning

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

glsl/linker: Check that re-declared, inter-shader built-in blocks match

>From GLSL 4.5 spec, section "7.1 Built-In Language Variables", page 130 of
the PDF states:

    "If multiple shaders using members of a built-in block belonging to
     the same interface are linked together in the same program, they must
     all redeclare the built-in block in the same way, as described in
     section 4.3.9 “Interface Blocks” for interface-block matching, or a
     link-time error will result."

Fixes:
* GL45-CTS.CommonBugs.CommonBug_PerVertexValidation

v2 (Neil Roberts):
Explicitly look for gl_PerVertex in the symbol tables instead of
waiting to find a variable in the interface.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102677
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>

glsl: Use the utility function to copy symbols between symbol tables

This effectively factorizes a couple of similar routines.

v2 (Neil Roberts): Non-trivial rebase on master

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>

glsl_parser_extra: Add utility to copy symbols between symbol tables

Some symbols gathered in the symbols table during parsing are needed
later for the compile and link stages, so they are moved along the
process. Currently, only functions and non-temporary variables are
copied between symbol tables. However, the built-in gl_PerVertex
interface blocks are also needed during the linking stage (the last
step), to match re-declared blocks of inter-stage shaders.

This patch adds a new utility function that will factorize current code
that copies functions and variables between two symbol tables, and in
addition will copy explicitly declared gl_PerVertex blocks too.

The function will be used in a subsequent patch.

v2 (Neil Roberts):
Allow the src symbol table to be NULL and explicitly copy the
gl_PerVertex symbols in case they are not referenced in the exec_list.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eduardo Lima Mitev <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com>

i965: remove unused variable

Fixes: 2c873060d3578c7004c0 "i965: Delete unused
       brw_vs_prog_data::nr_attributes field."
Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>

meson: wire up egl/android

Cc: Rob Herring <robh@kernel.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

glsl: Remove ir_binop_greater and ir_binop_lequal expressions

NIR does not have these instructions.  TGSI and Mesa IR both implement
them using < and >=, repsectively.  Removing them deletes a bunch of
code and means I don't have to add code to the SPIR-V generator for
them.

v2: Rebase on 2+ years of change... and fix a major bug added in the
rebase.

   text    data     bss     dec     hex filename
8255291  268856  294072 8818219  868e2b 32-bit i965_dri.so before
8254235  268856  294072 8817163  868a0b 32-bit i965_dri.so after
7815339  345592  420592 8581523  82f193 64-bit i965_dri.so before
7813995  345560  420592 8580147  82ec33 64-bit i965_dri.so after

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/parser: Track built-in types using the glsl_type directly

Without the lexer changes, tests/glslparsertest/glsl2/tex_rect-02.frag
fails.  Before this change, the parser would determine that
sampler2DRect is not a valid type because the call to
state->symbols->get_type() in ast_type_specifier::glsl_type() would
return NULL.  Since ast_type_specifier::glsl_type() is now going to
return the glsl_type pointer that it received from the lexer, it doesn't
have an opportunity to generate an error.

   text    data     bss     dec     hex filename
8255243  268856  294072 8818171  868dfb 32-bit i965_dri.so before
8255291  268856  294072 8818219  868e2b 32-bit i965_dri.so after
7815195  345592  420592 8581379  82f103 64-bit i965_dri.so before
7815339  345592  420592 8581523  82f193 64-bit i965_dri.so after

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/parser: Return the glsl_type object from the lexer

This allows us to use a single token for every built-in type except void.

   text    data     bss     dec     hex filename
8275163  269336  294072 8838571  86ddab 32-bit i965_dri.so before
8255243  268856  294072 8818171  868dfb 32-bit i965_dri.so after
7836963  346552  420592 8604107  8349cb 64-bit i965_dri.so before
7815195  345592  420592 8581379  82f103 64-bit i965_dri.so after

Yes, the 64-bit binary shrinks by 21k.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/parser: Allocate identifier inside classify_identifier

Passing YYSTYPE into classify_identifier enables a later patch.

   text    data     bss     dec     hex filename
8310339  269336  294072 8873747  876713 32-bit i965_dri.so before
8275163  269336  294072 8838571  86ddab 32-bit i965_dri.so after
7845579  346552  420592 8612723  836b73 64-bit i965_dri.so before
7836963  346552  420592 8604107  8349cb 64-bit i965_dri.so after

Yes, the 64-bit binary shrinks by 8k.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/parser: Move anonymous struct name handling to the parser

There are two callers of the constructor, and they are right next to
each other.  Move the "#anon_struct" name handling to the parser so that
the conditional can be removed.

I've also deleted part of the comment (about the memory leak) because I
don't think it's quite accurate or relevant.

   text    data     bss     dec     hex filename
8310399  269336  294072 8873807  87674f 32-bit i965_dri.so before
8310339  269336  294072 8873747  876713 32-bit i965_dri.so after
7845611  346552  420592 8612755  836b93 64-bit i965_dri.so before
7845579  346552  420592 8612723  836b73 64-bit i965_dri.so after

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl/parser: Silence unused parameter warning

glsl/glsl_parser_extras.cpp: In constructor ‘ast_struct_specifier::ast_struct_specifier(void*, const char*, ast_declarator_list*)’:
glsl/glsl_parser_extras.cpp:1675:50: warning: unused parameter ‘lin_ctx’ [-Wunused-parameter]
 ast_struct_specifier::ast_struct_specifier(void *lin_ctx, const char *identifier,
                                                  ^~~~~~~

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: Silence unused parameter warnings

glsl/standalone_scaffolding.cpp: In function ‘GLbitfield _mesa_program_state_flags(const gl_state_index*)’:
glsl/standalone_scaffolding.cpp:103:66: warning: unused parameter ‘state’ [-Wunused-parameter]
 _mesa_program_state_flags(const gl_state_index state[STATE_LENGTH])
                                                                  ^
glsl/standalone_scaffolding.cpp: In function ‘char* _mesa_program_state_string(const gl_state_index*)’:
glsl/standalone_scaffolding.cpp:109:67: warning: unused parameter ‘state’ [-Wunused-parameter]
 _mesa_program_state_string(const gl_state_index state[STATE_LENGTH])
                                                                   ^
glsl/standalone_scaffolding.cpp: In function ‘void _mesa_delete_shader(gl_context*, gl_shader*)’:
glsl/standalone_scaffolding.cpp:115:40: warning: unused parameter ‘ctx’ [-Wunused-parameter]
 _mesa_delete_shader(struct gl_context *ctx, struct gl_shader *sh)
                                        ^~~
glsl/standalone_scaffolding.cpp: In function ‘void _mesa_delete_linked_shader(gl_context*, gl_linked_shader*)’:
glsl/standalone_scaffolding.cpp:123:47: warning: unused parameter ‘ctx’ [-Wunused-parameter]
 _mesa_delete_linked_shader(struct gl_context *ctx,
                                               ^~~

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Android: move drivers' symlinks to /vendor (v2)

Having moved gallium_dri.so library to /vendor/lib/dri
also symlinks need to be coherently created using TARGET_OUT_VENDOR instead of TARGET_OUT
or all non Intel drivers will not be loaded with Android N and earlier,
thus causing SurfaceFlinger SIGABRT

(v2) simplification of post install command

Fixes: c3f75d483c ("Android: move libraries to /vendor")
Cc: 17.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Rob Herring <robh@kernel.org> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Revert "foo"

This reverts commit 27d5a7bce09aef83d3349cca5f3777007b3b94b6.

I fat fingered it, failing to reset the checkout before applying the
sequential commit.

docs/release-calendar: update - 17.3.0-rc2 is out

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

foo

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

util: hashtable: make hashing prototypes match

It seems nobody's using the string hashing function. If you try to
pass it directly to the hashtable creation function, you'll get
compiler warning for non matching prototypes. Let's make them match.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

docs: update calendar, add news item and link release notes for 17.2.4

Signed-off-by: Andres Gomez <agomez@igalia.com>

docs: add sha256 checksums for 17.2.4

Signed-off-by: Andres Gomez <agomez@igalia.com>

docs: add release notes for 17.2.4

Signed-off-by: Andres Gomez <agomez@igalia.com>

radv: Fix -Wformat-security issue

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103513
Fixes: de889794134e ("radv: Implement VK_AMD_shader_info")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv: add cache items to in memory cache when reading from disk

Otherwise we will leak them, load duplicates from disk rather
than memory and never write items loaded from disk to the apps
pipeline cache.

Fixes: fd24be134ffd 'radv: make use of on-disk cache'
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: fix blorp stage_prog_data->param leak

Patch uses mem_ctx for allocation to ensure param array gets freed
later.

==6164== 48 bytes in 1 blocks are definitely lost in loss record 61 of 193
==6164==    at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==6164==    by 0x12E31C6C: ralloc_size (ralloc.c:121)
==6164==    by 0x130189F1: fs_visitor::assign_constant_locations() (brw_fs.cpp:2095)
==6164==    by 0x13022D32: fs_visitor::optimize() (brw_fs.cpp:5715)
==6164==    by 0x13024D5A: fs_visitor::run_fs(bool, bool) (brw_fs.cpp:6229)
==6164==    by 0x1302549A: brw_compile_fs (brw_fs.cpp:6570)
==6164==    by 0x130C4B07: blorp_compile_fs (blorp.c:194)
==6164==    by 0x130D384B: blorp_params_get_clear_kernel (blorp_clear.c:79)
==6164==    by 0x130D3C56: blorp_fast_clear (blorp_clear.c:332)
==6164==    by 0x12EFA439: do_single_blorp_clear (brw_blorp.c:1261)
==6164==    by 0x12EFC4AF: brw_blorp_clear_color (brw_blorp.c:1326)
==6164==    by 0x12EFF72B: brw_clear (brw_clear.c:297)

Fixes: 8d90e28839 ("intel/compiler: Allocate pull_param in assign_constant_locations")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org

i965: correctly assign SamplerCount of INTERFACE_DESCRIPTOR_DATA

We were dividing by 4 twice.  This also papered over a bug where we
were neglecting to clamp the sampler count to the [0, 16] range.

This should have no functional impact, it only affects prefetching.

v2 [Kenneth Graunke]:
 - Clamp sampler_count to [0, 16] to avoid overflowing the valid values
   for this field.  Write a commit message.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Only set key->high_quality_derivatives when it matters.

This avoids recompiles for shaders that don't use explicit derivatives
when ctx->Hint.FragmentShaderDerivative == GL_NICEST.

For example, GFXBench 5 Aztec Ruins sets the GL_NICEST hint before
compiling any shaders, but none of them use dFdx() or dFdy() - only
implicit derivatives.  This doesn't eliminate any recompiles, but
does eliminate one of the reasons for doing so.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Make nir_gather_info collect a uses_fddx_fddy flag.

i965 turns fddx/fddy into their coarse/fine variants based on the
ctx->Hint.FragmentShaderDerivative setting.  It needs to know whether
this can impact a shader in order to better guess NOS settings.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Update brw_wm_debug_recompile() for newer key entries.

Also, reorder them to match the structure's field order, to make it
easier to check that they're all present.

Acked-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Delete brw_wm_prog_key::drawable_height.

This has been unused since we switched to nir_lower_wpos_ytransform.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: Implement VK_AMD_shader_info

This allows an app to query shader statistics and get a disassembly of
a shader. RenderDoc git has support for it, so this allows you to view
shader disassembly from a capture.

When this extension is enabled on a device (or when tracing), we now
disable pipeline caching, since we don't get the shader debug info when
we retrieve cached shaders.

v2: Improvements to resource usage reporting
v3: Disassembly string must be null terminated (string_buffer's length
    does not include the terminator)
v4: Fixed LDS reporting. (Bas)

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

etnaviv: add ext_texture_srgb support

Following piglits are passing:
 - glean@texture_srgb
 - spec@ext_texture_srgb@fbo-srgb
 - spec@ext_texture_srgb@tex-srgb
 - spec@ext_texture_srgb@texwrap formats
 - spec@ext_texture_srgb@texwrap formats-s3tc

Btw. this enables GL 2.1 :-)

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>

intel/compiler/gen9: Pixel shader header only workaround

Fixes intermittent GPU hangs on Broxton with an Intel internal
test case.

There are plenty of similar fragment shaders in piglit that do
not use any varyings and any uniforms. According to the
documentation special timing is needed between pipeline stages.
Apparently we just don't hit that with piglit. Even with the
failing test case one doesn't always get the hang.

Moreover, according to the error states the hang happens
significantly later than the execution of the problematic shader.
There are multiple render cycles (primitive submissions) in between.
I've also seen error states where the ACTHD points outside the
batch. Almost as if the hardware writes somewhere that gets used
later on. That would also explain why piglit doesn't suffer from
this - most tests kick off one render cycle and any corruption
is left unseen.

v2 (Ken): Instead of enabling push constants, enable one of the
          inputs (PSIZ).
v3 (Ken, Jason): Use LAYER instead making vulkan emit_3dstate_sbe()
                 happy.

Cc: "17.3 17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

scons: fix OSMesa driver build

Fixes: ea53d9a8eb5d4b2 "glapi: include generated headers without path"
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

scons: fix scons build to find generated glapitable.h

Fixes: ea53d9a8eb5d4b2 "glapi: include generated headers without path"
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

gallium: s/unsigned/enum pipe_prim_type/

In the vbuf_render::set_primitive() functions.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

draw: don't cull tris with zero area

Culling tris with zero area seems like a great idea, but apparently with
fill mode line (and point) we're supposed to draw them, at least some tests
for some other state tracker complained otherwise.
Such tris also always seem to be back facing (not sure if this can be
inferred from anything, since in a mathematical sense it cannot really be
determined), so make sure to account for this when filling in the face
information.
(For solid tris, this is of course unnecessary, drivers will throw the tris
away later in any case.)

Reviewed-by: Brian Paul <brianp@vmware.com>

meson: Add a dependency on nir_opcodes_h for freedreno

This fixes a race condition in the build.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>

meson: build gallium based osmesa

This has been tested with the osdemo from mesa-demos

v2: - Add SELinux dependency
    - fix typo GALLIUM_LLVM -> GALLIUM_LLVMPIPE

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build classic osmesa

This builds the classic (non-gallium) osmesa with meson. This has been
tested with the osdemo application from mesa-demos.

v2: - Remove unrelated change
    - Add SELinux dependency to osmesa

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: Add generated files to non-shared glapi

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

glapi: include generated headers without path

This has been tested wtih make dist-check and with meson.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

osmesa: Include generated headers without path

This makes things much easier to ensure correctness with meson. Tested
with make dist-check and with meson.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: move gallium include declarations to src

These are used by non-gallium osmesa, so they need to be defined outside
of the gallium subdirectory.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: fix glprocs.h generator

There was a typo that causes the generated file to be called gl_procs.h
instead.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: rename all instances of xf86vm to xxf86vm

Because consistency

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: fix pkg-config Gl Require.Private

xf86vm -> xxf86vm

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

mesa: Accept GL_BACK in get_fb0_attachment with ARB_ES3_1_compatibility.

According to the ARB_ES3_1_compatibility specification,
glGetFramebufferAttachmentParameteriv is supposed to accept BACK,
and it behaves exactly like BACK_LEFT.

Fixes a GL error in GFXBench 5 Aztec Ruins.

Cc: "17.3 17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

gallium/os: fix align_malloc() / os_malloc_aligned() comment mix-up

os_free_aligned() is the counterpart to os_malloc_aligned().
Trivial.

formatquery: use correct target check for IMAGE_FORMAT_COMPATIBILITY_TYPE

From the spec:
   "IMAGE_FORMAT_COMPATIBILITY_TYPE: The matching criteria use for the
    resource when used as an image textures is returned in
    <params>. This is equivalent to calling GetTexParameter"

So we would need to return None for any target not supported by
GetTexParameter. By mistake, we were using the target check for
GetTexLevelParameter.

v2: fix typo (GetTextParameter vs GetTexParemeter) on comment (Illia Mirkin)

Reviewed-by: Antia Puentes <apuentes@igalia.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

meson: bring MESA_GIT_SHA1 in line with other build systems

Meson's vcs_tag() uses the output of `git describe`, eg.
  17.3-branchpoint-5-gfbf29c3cd15ae831e249+

Whereas the other build systems used a script that outputs only the sha1
of the HEAD commit, eg.
  fbf29c3cd1

Given that this information is used by printing it next to the version
number, there's some redundancy here, and inconsistency between build
systems.

Bring Meson in line by making it use the same script, with the added
advantage of now supporting the MESA_GIT_SHA1_OVERRIDE env var.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

buildsys: move file regeneration logic to the script itself

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

radv: allow to use a compute shader for resetting the query pool

Serious Sam Fusion 2017 uses a huge number of occlusion queries,
and the allocated query pool buffer is greater than 4096 bytes.

This slightly improves performance (tested in Ultra) from
117.2 FPS to 119.7 FPS (~+2%) on my RX480.

This also improves Talos, from 69 FPS to 72/73 FPS (~+5%).

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: make radv_fill_buffer() return the needed flush bits

Only needed when the CS path is used.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

meson: wire up selinux

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

wayland-egl: fix wayland cflags

Fixes: 80bfff5c4f1d4d8c842a0 "wayland-egl: adds CFLAGS for wayland.egl.h include"
Suggested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>

vc4: fix release build

Mesa's DEBUG and assert's NDEBUG are not tied to each other, so we need
to explicitly compile this code out.

Fixes: 3df78928786134874eafa "vc4: Drop reloc_count tracking for debug
       asserts on non-debug builds."
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: unref push_const_bo in intelDestroyContext

Valgrind shows that leak is caused by gen6_upload_push_constant, add
unref push_const_bo per stage to destructor to fix this (like done for
scratch_bo).

   ==10952== 144 bytes in 1 blocks are definitely lost in loss record 44 of 66
   ==10952==    at 0x4C30A1E: calloc (vg_replace_malloc.c:711)
   ==10952==    by 0x8C02847: bo_alloc_internal.constprop.10 (brw_bufmgr.c:344)
   ==10952==    by 0x8C425C4: intel_upload_space (intel_upload.c:101)
   ==10952==    by 0x8C22ED0: gen6_upload_push_constants (gen6_constant_state.c:154)

v2: remove if conditions, brw_bo_unreference handles NULL (Ken, Emil)

Fixes: 24891d7c05 ("i965: Store per-stage push constant BO pointers.")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org

i965: remove if conditions from scratch_bo unref

brw_bo_unreference handles NULL case

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv: Fix assert about source attrs.

Asserting slot >= 2 made sense when the URB read offset was always 1
(pair of slots).  Commit 566a0c43f0b9fbf5106161471dd5061c7275f761 made
it possible to read from the VUE header in slot 0, by adjusting the
offset to be 0.  So, this assert is now bogus.  Use the one from GL.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv: Drop URB entry output read handling in 3DSTATE_XS.

Commit 566a0c43f0b9fbf5106161471dd5061c7275f761 started setting the
3DSTATE_SBE bit to override these values with the one calculated there.

So, they're dead.  Stop setting them.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Delete unused brw_vs_prog_data::nr_attributes field.

Reviewed-by: Matt Turner <mattst88@gmail.com>

radeonsi: update hack for HTILE corruption in ARK: Survival Evolved

It appears that flushing the DB metadata is actually not sufficient
since the driver uses the new VS blit shaders. This looks quite
strange though, but it seems like we need to flush DB for fixing
the corruption.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102955
Fixes: 69ccb9dae7 (radeonsi: use new VS blit shaders (VS inputs in SGPRs)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv: add support for local bos. (v3)

This uses the new kernel interfaces for reduced cs overhead,
We only set the local flag for memory allocations that don't have
 a dedicated allocation and ones that aren't imports.

v2: add to all the internal buffer creation paths.
v3: missed some command submission paths, handle 0/empty bo lists.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/miptree: Take an isl_format in render_aux_usage

Not all rendering matches the miptree format.  We allow rendering to
texture views so there are cases where it may not match.  In those
cases, our current scheme of just passing the value of ctx->sRGBEnabled
isn't viable.  Instead, just do what we do for texturing and pass the
view format in directly.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: mesa-stable@lists.freedesktop.org

i965/blorp: Use more temporary isl_format variables

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: mesa-stable@lists.freedesktop.org

i965/blorp: Use blorp_to_isl_format for src_isl_format in blit_miptrees

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: mesa-stable@lists.freedesktop.org

spirv: Claim support for the simple memory model

It's rather surprising that we've never actually hit this before.
Aparently, Ian's SPIR-V generator currently claims the Simple when you
don't do anything complex.  We really shouldn't assert-fail on it.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: mesa-stable@lists.freedesktop.org

Android: egl: add dependency on libnativewindow

system/window.h is no longer available by default and is part of
libnativewindow, so add it to the shared libraries. It has to be conditional
because the library is only present in O and later.

Really, we should only be depending on vndk/window.h now, but that's only
in O and changing would be pretty invasive.

Signed-off-by: Rob Herring <robh@kernel.org>

meson: build nouveau vieux driver

Build tested only.

v2: - fix spelling error (veaux -> vieux)

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

meson: build r200 driver

v2: - remove TODO that is done

Build tested only

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

meson: build r100 driver

build tested only

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

install_megadrivers: print the full path with driver name

Instead of just the path.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

intel/tools/disasm: correctly observe FILE *out parameter

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/compiler: brw_validate_instructions to take const void* instead of void*

The disassembler does not (and should not) be modifying the data.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

loader: drop empty function alias

While at it, drop the duplicate return.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>

radeonsi: add a workaround for weird s_buffer_load_dword behavior on SI

See my LLVM patch which fixes the root cause.

Users have to apply this patch and then they have 2 choices:
- Downgrade to LLVM 5.0
- Update to LLVM git after my LLVM patch is pushed.

It won't be possible to use current and earlier development version
of LLVM 6.0.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: 17.3 <mesa-stable@lists.freedesktop.org>

util: use OpenBSD/NetBSD code on FreeBSD/DragonFly

Obtained from: FreeBSD ports

Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
[Emil Velikov: wrap long line]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

winsys/svga/drm: add ERESTART define for *BSD

Obtained from: FreeBSD ports

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

loader: use drmGetDeviceNameFromFd2 from libdrm

Reduce code duplication and automatically benefit from OS-specific
fixes to libdrm (e.g. in FreeBSD ports).

API was introduced with 2.4.74 and we already require 2.4.75 globally.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103283
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

meson: wayland-egl depends on wayland-client

Since wayland-egl.h is currently provided by the core Wayland package,
depend on wayland-client to make sure we get it in our include path.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 108d257a16 ("meson: build libEGL")
Cc: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: Dylan Baker <dylan@pnwbakers.com>
Cc: Gert Wollny <gw.fossdev@gmail.com>

freedreno: implement pipe->invalidate_resource()

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: GL_ARB_texture_barrier

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a5xx: rename invalidate_resource()

This is different from pipe->invalidate_resource()..

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a5xx: mem2gmem is read-only for BO

This should be OUT_RELOC() since the operation isn't writing to the
buffer.  Technically it doesn't matter much currently, since we'd
anyways to a gmem2mem later.  But that will change.

Signed-off-by: Rob Clark <robdclark@gmail.com>