Hal Gentz [Fri, 11 Oct 2019 00:35:50 +0000 (18:35 -0600)]
egl: Puts RGBA visuals in the second config selection group.
That way applications don't get windows that are compositor alpha-blended
accidentally.
In the ideal world, this would be done by the xserver, as it does for
GLX, however, an appropriate place could not be found, so it's being
placed here instead.
Fixes: 049f343e8ac "egl: Allow 24-bit visuals for 32-bit RGBA8888 configs"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67676
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hal Gentz <zegentzy@protonmail.com>
Hal Gentz [Fri, 11 Oct 2019 00:35:50 +0000 (18:35 -0600)]
egl: Fixes transparency with EGL and X11.
This commit does this by allowing both RGB and RGBA visuals to match with
EGL configs. We also expose the `EGL_MESA_config_select_group` egl
extension, which is similar to GLX's visual select group extension, to
allow the RGBA visuals to get less priority.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67676
Fixes: 049f343e8ac "egl: Allow 24-bit visuals for 32-bit RGBA8888 configs"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hal Gentz <zegentzy@protonmail.com>
Hal Gentz [Fri, 11 Oct 2019 00:35:50 +0000 (18:35 -0600)]
egl: Add EGL_CONFIG_SELECT_GROUP_MESA ext.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67676
Fixes: 049f343e8ac "egl: Allow 24-bit visuals for 32-bit RGBA8888 configs"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Hal Gentz <zegentzy@protonmail.com>
Kenneth Graunke [Fri, 3 May 2019 23:39:18 +0000 (16:39 -0700)]
intel/fs/gen12: Use TCS 8_PATCH mode.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Jason Ekstrand [Tue, 12 Jun 2018 06:21:57 +0000 (23:21 -0700)]
intel/fs/gen12: Implement gl_FrontFacing on gen12+.
The bit moved on gen12 in order to prepare for dual-SIMD8 dispatch.
This implementation isn't an entirely complete as it only works on SIMD8
and SIMD16 and not dual-SIMD8.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Sat, 28 Sep 2019 02:13:11 +0000 (19:13 -0700)]
intel/fs/gen11+: Fix CS_OPCODE_CS_TERMINATE codegen.
Apparently the ts_request_type and ts_resource_select thread spawner
message descriptor bits were removed from the hardware at least since
ICL. Drop them in order to avoid assertion failures on Gen12+
platforms which don't have any encoding for this. On Gen9+ these are
probably just ignored by the hardware, so this is unlikely to have had
any functional implications prior to Gen12.
v2: Mark TS message fields as non-existing in brw_inst.h on ICL. (Caio)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Wed, 4 Sep 2019 00:31:37 +0000 (17:31 -0700)]
intel/fs/gen12: Fix barrier codegen.
The WAIT instruction has been removed, but SYNC.bar can be used
instead to wait for a notification on n0.0.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 4 Sep 2019 00:29:11 +0000 (17:29 -0700)]
intel/eu: Don't set notify descriptor field of gateway barrier message.
Apparently this field was removed on SKL, and according to the
hardware docs for previous platforms "This field is only valid for a
ForwardMsg message. It is ignored for other messages. The BarrierMsg
message always increments the N0 notification counter".
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Thu, 22 Aug 2019 23:16:26 +0000 (16:16 -0700)]
intel/ir/gen12: Update assert in brw_stage_has_packed_dispatch().
Confirmed no regressions after a full Piglit run on TGL with the
brw_fs_test_dispatch_packing() test enabled.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Jason Ekstrand [Wed, 18 Apr 2018 00:12:05 +0000 (17:12 -0700)]
intel/eu/validate/gen12: Don't blow up on indirect src0.
They look like a NULL source if you don't look at the address mode.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 6 Feb 2019 05:54:38 +0000 (21:54 -0800)]
intel/eu/validate/gen12: Validation fixes for SEND instruction.
The following fix-up by Jordan Justen is squashed in:
intel/eu/validate: gen12 send instruction doesn't have a dst type field
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 6 Feb 2019 05:54:54 +0000 (21:54 -0800)]
intel/eu/validate/gen12: Fix validation of SYNC instruction.
src0 will typically be null for this instruction.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 7 Dec 2018 22:09:25 +0000 (14:09 -0800)]
intel/eu/validate/gen12: Implement integer multiply restrictions in EU validator.
Due to hardware bug filed as HSDES#
1604601757.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Jordan Justen [Wed, 13 Dec 2017 03:01:44 +0000 (19:01 -0800)]
intel/ir: Lower fpow on Gen12.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 7 Dec 2018 22:13:53 +0000 (14:13 -0800)]
intel/fs/gen12: Don't support source mods for 32x16 integer multiply.
Due to hardware bug filed as HSDES#
1604601757.
v2: Only return if result of fs_inst::can_do_source_mods() is known to
be false for the case new orthogonal restrictions are implemented
below in the future. (Caio)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Wed, 28 Aug 2019 05:02:49 +0000 (22:02 -0700)]
intel/disasm: Disassemble register file of split SEND sources.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 28 Aug 2019 05:02:19 +0000 (22:02 -0700)]
intel/disasm: Don't disassemble saturate control on SEND instructions.
The field is gone on Gen12+ and it was illegal on previous
generations.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 28 Aug 2019 04:52:51 +0000 (21:52 -0700)]
intel/disasm/gen12: Disassemble Gen12 SEND instructions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Sat, 27 Apr 2019 00:08:25 +0000 (17:08 -0700)]
intel/disasm/gen12: Disassemble Gen12 SYNC instruction.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:37 +0000 (14:13 -0800)]
intel/disasm/gen12: Disassemble three-source instruction source and destination regions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:38 +0000 (14:13 -0800)]
intel/disasm/gen12: Fix disassembly of some common instruction controls.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:38 +0000 (14:13 -0800)]
intel/disasm/gen12: Disassemble software scoreboard information.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Thu, 10 Oct 2019 01:47:29 +0000 (18:47 -0700)]
intel/fs/gen12: Demodernize software scoreboard lowering pass.
Kept as a separate commit in order to avoid distracting reviewers of
the software scoreboard pass with memory management boilerplate.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:37 +0000 (14:13 -0800)]
intel/fs/gen12: Introduce software scoreboard lowering pass.
Gen12+ hardware lacks the register scoreboard logic that used to
guarantee data coherency between register reads and writes in previous
generations. This lowering pass runs after register allocation in
order to make up for it.
It works by performing global dataflow analysis in order to determine
the set of potential dependencies of every instruction in the shader,
and then inserts any required SWSB annotations and additional SYNC
instructions in order to guarantee data coherency.
v2: Drop unnecessary _safe list iteration (Caio).
v3: Temporarily workaround potential WaR hazard between FPU
instruction and subsequent out-of-order write, pending
clarification from the hardware team. Drop redundant tracking of
implicit access of acc0-1, since the hardware guarantees coherency
of these (but not the other accumulators...).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:37 +0000 (14:13 -0800)]
intel/fs/gen12: Add scheduling information to the IR.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 27 Sep 2019 06:38:24 +0000 (23:38 -0700)]
intel/eu/gen12: Set SWSB annotations in hand-crafted assembly.
Reviewers are encouraged to audit the code generation pass
independently for the case I missed some potential data hazard or new
code has been added in the meantime.
v2: Add SYNC instruction to cr0 workaround in brw_float_controls_mode().
v3: Drop likely redundant (and potentially harmful) RegDist SWSB
annotation from ce0 read in brw_find_live_channel() (Caio).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:36 +0000 (14:13 -0800)]
intel/eu/gen12: Add tracking of default SWSB state to the current brw_codegen instruction.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:36 +0000 (14:13 -0800)]
intel/eu/gen12: Add auxiliary type to represent SWSB information during codegen.
v2: Introduce extra tgl_swsb_sbid() constructor (Caio).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Wed, 4 Sep 2019 00:51:17 +0000 (17:51 -0700)]
intel/fs/gen12: Add codegen support for the SYNC instruction.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 6 Feb 2019 04:53:06 +0000 (20:53 -0800)]
intel/ir/gen12: Add SYNC hardware instruction.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 27 Sep 2019 06:36:58 +0000 (23:36 -0700)]
intel/eu/gen12: Don't set thread control, it's gone.
An effect similar to the one formerly provided by setting thread
control to "switch" can be achieved now by setting a RegDist of 1 on
the SWSB field.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:36 +0000 (14:13 -0800)]
intel/eu/gen12: Don't set DD control, it's gone.
A future lowering pass will simulate the same behavior originally
provided by NoDDChk/NoDDClr at the IR level by using appropriate SWSB
annotations.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Mon, 26 Aug 2019 01:12:35 +0000 (18:12 -0700)]
intel/eu/gen12: Use SEND instruction for split sends.
The new SEND instruction behaves like the former SENDS instruction.
The original single-payload SEND instruction is gone.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Tue, 3 Sep 2019 19:18:38 +0000 (12:18 -0700)]
intel/eu/gen12: Codegen SEND descriptor regions correctly.
The SEND instruction is now four-source. The descriptor is no longer
part of source 1, so avoid touching it to avoid corruption while
initializing the descriptor.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Mon, 26 Aug 2019 01:13:42 +0000 (18:13 -0700)]
intel/eu/gen12: Codegen pathological SEND source and destination regions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:35 +0000 (14:13 -0800)]
intel/eu/gen12: Codegen control flow instructions correctly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:35 +0000 (14:13 -0800)]
intel/eu/gen12: Codegen three-source instruction source and destination regions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Mon, 26 Aug 2019 00:52:54 +0000 (17:52 -0700)]
intel/eu/gen12: Fix codegen of immediate source regions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:35 +0000 (14:13 -0800)]
intel/eu/gen12: Add Gen12 opcode descriptions to the table.
Quite a lot of churn because the encoding of most hardware opcodes has
changed unfortunately.
v2: Split dot-product description fixes to separate patch (Caio).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 27 Sep 2019 22:52:31 +0000 (15:52 -0700)]
intel/eu/gen11+: Mark dot product opcodes as unsupported on opcode_descs table.
These instructions have been removed from the hardware.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:35 +0000 (14:13 -0800)]
intel/eu/gen12: Implement datatype binary encoding.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Sagar Ghuge [Fri, 16 Nov 2018 00:19:39 +0000 (16:19 -0800)]
intel/eu/gen12: Implement immediate 64 bit constant encoding.
On Gen12, 64 bit immediate constants are loaded in reverse order. Lower
32 bit gets loaded from bit 96-127 and higher 32 bits from 64-95 in
instruction encoding.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Co-authored-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:34 +0000 (14:13 -0800)]
intel/eu/gen12: Implement compact instruction binary encoding.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Francisco Jerez [Fri, 9 Nov 2018 22:13:34 +0000 (14:13 -0800)]
intel/eu/gen12: Implement indirect region binary encoding.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Francisco Jerez [Sat, 24 Aug 2019 22:28:08 +0000 (15:28 -0700)]
intel/eu/gen12: Implement SEND instruction binary encoding.
v2: Fix off-by-one upper GET_BITS() bound, combine 25-29 and 30-31
descriptor fields (Ken). Shorten name of GEN12_MD() macro, drop
some removed TS message descriptor fields (Jordan).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 23 Aug 2019 01:14:12 +0000 (18:14 -0700)]
intel/eu/gen12: Implement control flow instruction binary encoding.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Sun, 25 Aug 2019 01:12:43 +0000 (18:12 -0700)]
intel/eu/gen12: Implement three-source instruction binary encoding.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Sat, 24 Aug 2019 05:49:08 +0000 (22:49 -0700)]
intel/eu/gen12: Implement basic instruction binary encoding.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:35 +0000 (14:13 -0800)]
intel/eu/gen12: Add sanity-check asserts to brw_inst_bits() and brw_inst_set_bits().
These caught a few bugs during the development of this series.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 23 Aug 2019 00:52:11 +0000 (17:52 -0700)]
intel/eu/gen12: Extend brw_inst.h macros for Gen12 support.
The encoding of almost every instruction field has changed in Gen12,
so this involves adding a Gen12+ bitfield spec to every brw_inst
macro. In addition some new macros are required to handle certain
discontiguous and variable-length fields.
This commit doesn't actually include the Gen12 updated bitfield specs,
only the macros are extended here for reviewability.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Rename FDC() to FFDC() and FDC1() to FDC() for consistency with
the existing F() and FF() macros.
Francisco Jerez [Fri, 27 Sep 2019 21:50:00 +0000 (14:50 -0700)]
intel/ir: Represent physical edge of unconditional CONTINUE instruction.
This edge doesn't exist in the original scalar program, but it
represents a potential control flow path the EU will take in cases
where control flow isn't uniform across channels of the same SIMD
thread.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 27 Sep 2019 21:49:42 +0000 (14:49 -0700)]
intel/ir: Represent physical edge of ELSE instruction.
This edge doesn't exist in the original scalar program, but it
represents a potential control flow path the EU will take in cases
where the condition isn't uniform across channels of the same SIMD
thread.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Tue, 6 Aug 2019 01:21:05 +0000 (18:21 -0700)]
intel/ir: Represent logical edge of BREAK instruction.
Currently only the physical back-edge is represented, which
incidentally also leads to the exit block of the loop, but we need the
direct logical edge in addition for our logical CFG representation to
be complete.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Fri, 27 Sep 2019 21:49:14 +0000 (14:49 -0700)]
intel/ir: Add helper function to push block onto CFG analysis stack.
Requested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Tue, 6 Aug 2019 00:36:40 +0000 (17:36 -0700)]
intel/ir: Represent physical and logical subsets of the CFG.
This represents two control flow graphs in the same cfg_t data
structure: The physical CFG that will include all possible control
flow paths the EU can physically take, and the logical CFG restricted
to the control flow paths that exist in the original scalar program.
The latter is a subset of the former because in case of divergence the
SIMD vectorized program will take control flow paths that aren't part
of the original scalar program.
The bblock_link constructor and bblock_t::add_successor() now take a
"kind" parameter that specifies whether the edge is purely physical or
whether it's part of both the logical and physical CFGs (a logical
edge is of course always guaranteed to be in the physical CFG as
well). bblock_t::is_predecessor_of() and ::is_successor_of() also
take a kind parameter specifying which CFG is being queried. The '~>'
notation will be used now in order to represent purely physical edges
in IR dumps.
This commit doesn't actually add nor remove any edges from the CFG
(the only edges marked as purely physical here are the two WHILE loop
ones that already existed). Optimization passes should continue using
the same (incomplete) physical CFG they were using before until
they're fixed to do something smarter in a later commit, so this
shouldn't lead to any functional changes.
v2: Remove tabs from lines changed in this file (Caio).
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Francisco Jerez [Wed, 24 Jan 2018 03:38:45 +0000 (19:38 -0800)]
intel/ir: Drop hard-coded correspondence between IR and HW opcodes.
Having the IR opcodes locked to their hardware representation is risky
because it causes opcodes as different as BRC and IFF to compare equal
at the IR level (luckily the back-end only ever uses one opcode from
each group, right now), and it prevents us from supporting
instructions that change their hardware representation across
generations, which will become a problem on Gen12+ platforms.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Wed, 24 Jan 2018 03:23:20 +0000 (19:23 -0800)]
intel/eu: Encode and decode native instruction opcodes from/to IR opcodes.
Change brw_inst_set_opcode() and brw_inst_opcode() to call
brw_opcode_encode/decode() transparently in order to translate between
hardware and IR opcodes, and update the EU compaction code in order to
do the same as needed, so we can eventually drop the one-to-one
correspondence between hardware and IR opcodes.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Mon, 11 Jun 2018 19:54:17 +0000 (12:54 -0700)]
intel/eu: Rework opcode description tables to allow efficient look-up by either HW or IR opcode.
This rewrites the current opcode description tables as a more compact
flat data structure. The purpose is to allow efficient constant-time
look-up by either HW or IR opcode, which will allow us to drop the
hard-coded correspondence between HW and IR opcodes -- See the next
commits for the rationale.
brw_eu.c is now built as C++ source so we can take advantage of
pointers to member in order to make the look-up function work
regardless of the opcode_desc member used as look-up key.
v2: Optimize devinfo struct comparison (Caio)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Thu, 7 Jun 2018 22:32:15 +0000 (15:32 -0700)]
intel/eu: Fix up various type conversions in brw_eu.c that are illegal C++.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Francisco Jerez [Wed, 6 Feb 2019 07:22:06 +0000 (23:22 -0800)]
intel/eu: Split brw_inst ex_desc accessors for SEND(C) vs. SENDS(C).
The brw_inst opcode accessors are going away in one of the following
commits. We could potentially replace them with the new helpers that
do opcode remapping, but that would lead to a circular dependency
between brw_inst.h and brw_eu.h. This way we also avoid ordering
issues that can cause the semantics of the ex_desc accessors to change
depending on whether the ex_desc field is set after or before the
opcode instruction field.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:37 +0000 (14:13 -0800)]
intel/fs: Fix constness of implied_mrf_writes() argument.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Mon, 26 Aug 2019 07:12:26 +0000 (00:12 -0700)]
intel/fs: Define is_send() convenience IR helper.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Fri, 9 Nov 2018 22:13:37 +0000 (14:13 -0800)]
intel/fs: Define is_payload() method of the IR instruction class.
This is required because SEND message payload sources are fetched
asynchronously by the hardware, which can lead to WaR data corruption
on Gen12+ platforms if not handled specially by the compiler to
guarantee proper synchronization.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Francisco Jerez [Sat, 27 Apr 2019 00:11:42 +0000 (17:11 -0700)]
intel/fs: Teach fs_inst::is_send_from_grf() about some missing send-like instructions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Bas Nieuwenhuizen [Fri, 11 Oct 2019 12:49:05 +0000 (14:49 +0200)]
nir/dead_cf: Remove dead control flow after infinite loops.
And after discard-only loops. Otherwise we end up with dead code
which confuses nir_repair_ssa into adding a whole bunch of uses
of undefined. However, for derefs, we sometimes always expect to
get a variable instead of undefined.
Fixes dEQP-VK.graphicsfuzz.write-red-in-loop-nest on radv.
Fixes: c832820ce95 "nir/dead_cf: Repair SSA if the pass makes progress"
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1928
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Rhys Perry [Sat, 21 Sep 2019 14:33:44 +0000 (15:33 +0100)]
aco: don't use p_as_uniform for vgpr sampler/image indices
p_as_uniform can get CSE'd, which can be incorrect and break some
dEQP-VK.descriptor_indexing.* tests.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Rhys Perry [Sat, 21 Sep 2019 13:22:40 +0000 (14:22 +0100)]
aco: implement divergent vulkan_resource_index
Fixes the UBO/SSBO dEQP-VK.descriptor_indexing.* tests
v2: remove bld.copy() usage
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Rhys Perry [Sat, 21 Sep 2019 10:48:27 +0000 (11:48 +0100)]
aco: readfirstlane vgpr pointers in convert_pointer_to_64_bit()
This can happen when bcsel is used between the results of two
vulkan_resource_index. It's also probably needed for non-uniform
descriptor indexing
Fixes dEQP-VK.spirv_assembly.instruction.compute.variable_pointers.compute.reads_opselect_two_buffers
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Rhys Perry [Tue, 24 Sep 2019 12:36:16 +0000 (13:36 +0100)]
aco: use can_accept_constant in valu_can_accept_literal
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Rhys Perry [Tue, 24 Sep 2019 12:32:56 +0000 (13:32 +0100)]
aco: don't apply sgprs/constants to read/write lane instructions
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Rhys Perry [Sat, 21 Sep 2019 14:50:25 +0000 (15:50 +0100)]
nir/lower_input_attachments: pass on non-uniform access flag
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Rhys Perry [Sat, 21 Sep 2019 14:49:18 +0000 (15:49 +0100)]
nir/lower_non_uniform: lower image/texture instructions taking derefs
v2: always assert on the texture/sampler handle's num_components
v3: replicate the deref inside the loop
v4: remove a case of useless line wrapping
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Jonathan Marek [Wed, 24 Jul 2019 14:35:46 +0000 (10:35 -0400)]
etnaviv: rework etna_resource_create tiling choice
Now that the base resource is allowed to be incompatible with PE, we can
make a smarter choice of tiling mode to avoid allocating a PE compatible
base that is never used for regular textures. This affects GPUs like GC2000
where there is no tiling compatible with both PE and TE.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Jonathan Marek [Sat, 10 Aug 2019 21:00:32 +0000 (17:00 -0400)]
etnaviv: rework compatible render base
For PE-incompatible layouts, use a mechanism similar to what texture does
to create a compatible base resource.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Jonathan Marek [Sat, 10 Aug 2019 20:44:07 +0000 (16:44 -0400)]
etnaviv: get addressing mode from tiling layout
Remove the "addressing_mode" state, which is currently set incorrectly, and
instead deduce the addressing mode from the tiling layout.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Jonathan Marek [Tue, 2 Jul 2019 17:34:02 +0000 (13:34 -0400)]
etnaviv: clear texture cache and flush ts when texture is modified
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Christian Gmeiner [Sat, 5 Oct 2019 12:53:46 +0000 (14:53 +0200)]
etnaviv: output the same shader-db format as freedreno, v3d and intel
This lets us reuse their report.py.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Christian Gmeiner [Thu, 3 Oct 2019 20:14:20 +0000 (22:14 +0200)]
etnaviv: nir: start to make use of compile_error(..)
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Michel Dänzer [Fri, 11 Oct 2019 09:10:01 +0000 (11:10 +0200)]
gitlab-ci: Disable meson-mingw32-x86_64 job again for now
The wrapdb.mesonbuild.com SSL certificate expired, causing the job to
fail: https://gitlab.freedesktop.org/mesa/mesa/-/jobs/731864
Switching to http:// doesn't avoid it:
https://gitlab.freedesktop.org/daenzer/mesa/-/jobs/732043
Michel Dänzer [Thu, 10 Oct 2019 13:27:17 +0000 (15:27 +0200)]
gitlab-ci: Add .use-debian-10 template
It simplifies the definitions of jobs using the Debian 10 image.
The needs: was previously missing from the llvmpipe/softpipe test jobs,
so they could spuriously run if the debian-10 job failed or was
cancelled.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Michel Dänzer [Tue, 8 Oct 2019 13:58:27 +0000 (15:58 +0200)]
gitlab-ci: Remove redundant .meson-cross template script
It was identical to the one inherited from the .meson-build template.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Dave Airlie [Thu, 10 Oct 2019 03:27:30 +0000 (13:27 +1000)]
gallivm: fix coroutines on aarch64 with llvm 8
The coroutine split pass is missing a dependency before LLVM 9.0,
and fails to initialise properly if the CallGraphWrapperPass hasn't
be initialised earlier (x86 does it due to some of it's passes
requiring it).
This is a workaround for llvm 8 (coroutines are only supported in 8
and higher). It adds another pass that has a dependency on the pass
the coroutines split requires. This pass shouldn't have any raal
effects.
Fixes: d32690b43c9 (gallivm: add coroutine pass manager support)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Dave Airlie [Wed, 9 Oct 2019 03:12:31 +0000 (13:12 +1000)]
llvmpipe: add support for tg4 component selection.
This is needed as part of GLES3.1 and helps for ARB_gpu_shader5.
Fixes: KHR-GLES31.core.texture_gather.* cases
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Dave Airlie [Wed, 9 Oct 2019 03:09:00 +0000 (13:09 +1000)]
st/glsl: add support for alternate TG4 encoding.
This will encode the component selection value (0, 1, 2, 3) into
the X swizzle of the sampler, if the driver requests it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Dave Airlie [Wed, 9 Oct 2019 03:07:04 +0000 (13:07 +1000)]
gallium: add a a new cap for changing the TGSI TG4 instruction encoding
Accessing the TG4 component via immediates in the llvmpipe backend is quite
messy (like really messy). Roland suggested we change the instruction encoding,
so introduce a cap to allow the component to be selected to be store in the
sampler swizzle, which should be otherwise unused.
I could probably switch all drivers over, but virgl would need some work that
I'd prefer not to rush it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Dave Airlie [Fri, 30 Aug 2019 00:30:00 +0000 (10:30 +1000)]
gallivm/sample: add gather component selection to the key.
This allows for component selection to work as per ARB_gpu_shader5/GLES3.1
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Roland Scheidegger [Thu, 10 Oct 2019 18:10:34 +0000 (20:10 +0200)]
llvmpipe: increase max texture size to 2GB
The 1GB limit was arbitrary, increase this to 2GB (which is the max
possible without code changes).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Dylan Baker [Thu, 19 Sep 2019 17:21:51 +0000 (10:21 -0700)]
gitlab-ci: Add a mingw x86_64 job
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Wed, 23 Jan 2019 22:21:26 +0000 (14:21 -0800)]
appveyor: Add support for meson as well as scons on windows
This job uses the vs2017 backend of meson (msbuild) as opposed to the
ninja backend used on MacOS and Linux.
v7: - rebase on master
- remove llvm (we'll add that back later)
- remove cygwin (we'll add that back later too)
v6: - rebase on master, including the addition of cygwin
- consolidate 3 appveyor patches into this one patch
v5 - use the new b_vscrt option instead of manually specifying the crt
v4: - rebase on python3 generators
- cache meson wraps
- Build x86 instead of x86_64, since that's what the pre-built LLVM
is
- update to vs2017 from vs2015
- set the default-library to static
- use the new vscrt override
- add the /m switch to msbuild to make the build somewhat faster
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Tue, 11 Jun 2019 18:25:31 +0000 (11:25 -0700)]
docs: update meson docs for windows
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Mon, 7 Oct 2019 20:03:58 +0000 (13:03 -0700)]
glsl/tests: Handle no-exec errors
Currently meson doesn't correctly handle passing compiled binaries to
scripts in tests. This patch looks to the future (0.53) when meson will
have this functionality, but also immediately it fixes these tests in
cross compiles by causing them to return 77, which meson interprets as
skip.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Tue, 8 Oct 2019 20:38:01 +0000 (13:38 -0700)]
meson/util: Don't run string_buffer tests on mingw
They succeed with MSVC but not with MinGW. I don't understand why they
fail.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Fri, 20 Sep 2019 20:09:54 +0000 (13:09 -0700)]
meson: glcpp tests are expected to fail on windows
v2: - Exclude the tests rather than xfail them
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Fri, 20 Sep 2019 19:19:52 +0000 (12:19 -0700)]
meson: only build timspec test if timespec is available
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Thu, 27 Jun 2019 21:52:40 +0000 (14:52 -0700)]
meson: don't error on formaters with mingw
MSVC is generally happy, but mingw errors. I've spent as much time
(several days) trying to squash all of these warnings and I'm done with
it, just leave them as warnings with MinGW.
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Tue, 29 Jan 2019 00:07:20 +0000 (16:07 -0800)]
meson: add msvc compat args to swr
This has always been present in the scons build, so it should be in
the meson build as well.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Tue, 10 Jul 2018 18:09:27 +0000 (11:09 -0700)]
meson: maintain names of shared API libraries
Mesa uses the lib prefix, and doesn't use a version for it's dynamic
libraries, which meson defaults to.
v2: - this patch
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Wed, 23 May 2018 00:32:21 +0000 (17:32 -0700)]
meson: don't build or run mesa-sha1 test on windows
It crashes hard (pop-up window and all).
v2: - Change comment to FIXME
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Wed, 23 May 2018 00:22:45 +0000 (17:22 -0700)]
meson: disable graw tests on mingw
I can't figure out why symbols are being exposed that shouldn't.
v2: - change comment to FIXME
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>
Dylan Baker [Wed, 23 May 2018 00:06:35 +0000 (17:06 -0700)]
meson: don't build gallium trivial tests on windows
They require the pipe-loaders, which require xmlconfig, which doesn't
build with msvc.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Kristian H. Kristensen <hoegsberg@google.com>