i965: Move the pre-depth-clear flush/stalls to intel_hiz_exec

Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/blorp: Take a layer range in intel_hiz_exec

Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/miptree: Store fast clear colors in an isl_color_value

This commit, out of necessity, makes a number of changes at once:

 1) Changes intel_mipmap_tree to store the clear color for both color
    and depth as an isl_color_value.

 2) Changes the depth/stencil emit code to do the format conversion of
    the depth clear value on Haswell and earlier instead of pulling a
    uint32_t directly from the miptree.

 3) Changes ISL's depth/stencil emit code to perform the format
    conversion of the depth clear value on Haswell and earlier instead
    of assuming that the depth value in the float is pre-converted.

 4) Changes blorp to pass the depth value through as a float.

 5) Changes the Vulkan driver to pass the depth value to blorp as a
    float rather than a uint.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chadversary@chromium.org>

dri3/GLX: Fix drawable invalidation v2

A number of internal VMware apitrace traces image comparisons fail with
dri3 because the viewport transformation becomes incorrect after an X
drawable resize. The incorrect viewport transformation sometimes persist
until the second draw-call after a swapBuffer.

Comparing with the dri2 glx code there are a couple of places where dri2
invalidates the drawable in the absence of server-triggered invalidation,
where dri3 doesn't do that. When these invalidation points are added to
dri3, the image comparisons become correct.

v2:
Addressed review comment by Michel Dänzer.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-and-tested-by: Michel Dänzer <michel.daenzer@amd.com>

i965: Fix alpha to one with dual color blending.

The BLEND_STATE documentation says that alpha to one must be disabled
when dual color blending is enabled.  However, it appears that it simply
fails to override src1 alpha to one.

We can work around this by leaving alpha to one enabled, but overriding
SRC1_ALPHA to ONE and ONE_MINUS_SRC1_ALPHA to ZERO.  This appears to be
what the other driver does, and it looks like it works despite the
documentation saying not to do it.

Fixes spec/ext_framebuffer_multisample/alpha-to-one-dual-src-blend *
Piglit tests.

v2: Add UNUSED to shut up warning on generations which don't use this.

Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: add KHR_no_error support for glTexSubImage*D()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add texsubimage() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: make _mesa_texture_sub_image() static

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename texsubimage() to texsubimage_err()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glCopyImageSubData()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add copy_image_subdata() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add prepare_target() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename prepare_target() to prepare_target_err()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBlitNamedFramebuffer()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add blit_named_framebuffer() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBlitFramebuffer()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add validate_depth_buffer() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add validate_stencil_buffer() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add validate_color_buffer() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: wrap blit_framebuffer() into blit_framebuffer_err()

Also add ALWAYS_INLINE to blit_framebuffer().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add 'no_error' parameter to blit_framebuffer()

The whole GLES3 block has been moved before the buffer validation
checks.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: make _mesa_blit_framebuffer() static

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBindBuffer()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glInvalidateBufferData()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glInvalidateBufferSubData()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add invalidate_buffer_subdata() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glBindVertexBuffers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glVertexArrayVertexBuffers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add vertex_array_vertex_buffers_err() helper

This also adds a 'no_error' parameter to vertex_array_vertex_buffer()
to be used in a following patch.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support for glScissor*()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add scissor() and scissor_array() helpers

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: rename ScissorIndexed() to scissor_indexed_err()

And move GET_CURRENT_CONTEXT() into the APIENTRY calls
for consistency.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: use _mesa_set_scissor() in ScissorIndexed()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: make _mesa_scissor_bounding_box() static

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: inline update_image_transfer_state() into _mesa_update_pixel()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: remove useless check in _mesa_update_pixel()

The only caller is _mesa_update_state_locked() which already
checks if _NEW_PIXEL is set before calling _mesa_update_pixel().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glcpp: fix #undef to match latest spec update and GLSLang implementation

GLSL ES spec includes the following:

   "It is an error to undefine or to redefine a built-in
    (pre-defined) macro name."

But desktop GLSL doesn't. This has sparked some discussion
in Khronos, and the final conclusion was to update the
GLSL 4.50 spec to include the following:

   "By convention, all macro names containing two consecutive
    underscores ( __ ) are reserved for use by underlying
    software layers.  Defining or undefining such a name in a
    shader does not itself result in an error, but may result
    in unintended behaviors that stem from having multiple
    definitions of the same name.  All macro names prefixed
    with “GL_” (“GL” followed by a single underscore) are also
    reserved, and defining or undefining such a name results in
    a compile-time error."

In other words, undefining GL_* names should be an error, but
undefining other names with a double underscore in them is
not strictly prohibited in desktop GLSL.

This patch fixes the preprocessor to apply these rules,
following exactly the implementation already present
in GLSLang. This fixes some tests in CTS.

Khronos bug:
https://cvs.khronos.org/bugzilla/show_bug.cgi?id=16003

Fixes:
KHR-GL45.shaders.preprocessor.definitions.undefine_core_profile_vertex
KHR-GL45.shaders.preprocessor.definitions.undefine_core_profile_fragment

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac/nir: move gpr counting inside argument handling.

This just moves this code in here to it's cleaner.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

ac/nir: assign argument param pointers in one place.

Instead of having the fragile code to do a second pass, just
give the pointers you want params in to the initial code,
then call a later pass to assign them.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

ac/nir: consolidate setting userdata location

Just pass a pointer and increment inside the function,
makes the code less error prone.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glthread: remove extra _mesa_glthread_finish() from generated code

The other user of print_sync_dispatch() was ending up with code that
looked like:

      _mesa_glthread_finish(ctx);
      _mesa_glthread_restore_dispatch(ctx);
      _mesa_glthread_finish(ctx);

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

intel: Fix broxton 2x6 way size computation

This patch is undoing the changes to way size computation
in broxton 2x6, made by below commit:

Commit: 0d576fbfbe912cf3fb9ab594bb31eb58bccf2138
Author:     Anuj Phogat <anuj.phogat@gmail.com>
i965: Simplify l3 way size computations

By making use of l3_banks field in gen_device_info struct
l3_way_size for gen7+ = 2 * l3_banks.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101306
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

radv: move chip_class extraction down further.

This seems to matter here in a profile, without this we spend a lot
more time exiting this function with no flush bits.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: move lots of index related things into the bind.

This just moves lots of stuff to the bind stage rather than
dealing with it in the draw stage.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: move calculating the vertex sgpr to the pipeline.

There is no need to calculate this at draw time.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: rename and make global some functions.

I want to use these in the pipeline setup stage.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

tree-wide: remove trailing backslash

Simple search for a backslash followed by two newlines.
If one of the newlines were to be removed, this would cause issues, so
let's just remove these trailing backslashes.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

radv/gfx9: use correct register setting for uconfig regs

Thanks to Marek for pointing this out.

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Remove SI num RB override for occlusion queries.

radeonsi doesn't have it anymore either.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Split out updating the vertex descriptors.

Simple refactor.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Move pipeline stuff from flush_state to emit_graphics_pipeline.

No functional changes.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Add early exit for cache flushes.

No sense checking each bit separately in the common case of none
being set.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Remove vertex_descriptors_dirty.

Redundant.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Don't use a divide by index_size.

Divides are pretty slow, and this is in the hot path of a draw.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

i965: Explicitly disallow tiled memcpy path on Gen4 with swizzling.

The manual detiling paths are not prepared to handle Gen4-G45 with
swizzling enabled, so explicitly disable them.  (They're already
disabled because these platforms don't have LLC but a future patch could
enable this path).

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove brw_bo_map_unsynchronized()

Call brw_bo_map() directly.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Use unsynchronized mappings for BufferSubData on non-LLC

Now that unsynchronized maps actually work, we can use them, like we do
on LLC platforms.

On Broxton, the performance of Unigine Valley 1.1-rc1 is improved by
37.6656% +/- 0.401389% (n=20) at 1280x720/QUALITY_LOW, and by
20.862% +/- 2.20901% (n=3) at 1920x1080/QUALITY_LOW.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Make unsynchronized maps unsynchronized on non-LLC

On Broxton, the performance of Unigine Valley 1.0 is improved by
13.3067% +/- 0.144322% (n=40) at 1280x720/QUALITY_LOW, and by
1.68478% +/- 0.484226% (n=3) at 1920x1080/QUALITY_LOW.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Implement brw_bo_map_unsynchronized() with MAP_ASYNC

This way we can let brw_bo_map() choose the best mapping type.

Part of the patch inlines map_gtt() into brw_bo_map_gtt() (and removes
map_gtt()). brw_bo_map_gtt() just wrapped map_gtt() with locking and a
call to set_domain(). map_gtt() is called by brw_bo_map_unsynchronized()
to avoid the call to set_domain(). With the MAP_ASYNC flag, we now have
the same behavior previously provided by brw_bo_map_unsynchronized().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Elide call to set_domain() if MAP_ASYNC

No functional change (no callers currently pass MAP_ASYNC)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add and use brw_bo_map()

We can encapsulate the logic for choosing the mapping type. This will
also help when we add WC mappings.

A few functional changes are made in this patch. On non-LLC, what were
previously WB mappings are now GTT mappings (in the prefilling debug
code in brw_performance_query.c; the shader_time code in brw_program.c;
and in the case of an RW mapping in intel_buffer_objects.c).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Drop MAP_READ from some write-only mappings

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Pass flags to brw_bo_map_*

brw_bo_map_cpu() took a write_enable arg, but it wasn't always clear
whether we were also planning to read from the buffer. I kept everything
semantically identical by passing only MAP_READ or MAP_READ | MAP_WRITE
depending on the write_enable argument.

The other flags are not used yet, but MAP_ASYNC for instance, will be
used in a later patch to remove the need for a separate
brw_bo_map_unsynchronized() function.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Rename brw_bo_map() -> brw_bo_map_cpu()

I'm going to make a new function named brw_bo_map() in a later patch
that is responsible for choosing the mapping type, so this patch clears
the way.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Rename *_virtual -> map_*

I think these are better names, and it reduces the delta between
upstream and Chris Wilson's brw-batch branch.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Pass the map-mode along to intel_mipmap_tree_map_raw()

Since we can distinguish when mapping between READ and WRITE, we can
pass along the map mode to avoid stalls and flushes where possible.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Add a cache_coherent field to brw_bo

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove unused 'use_resource_streamer' field

Missing in the resource streamer removal of commit 951f56cd43bc.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove brw_bo's virtual member

Just return the map from brw_map_bo_*

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Remove unused brw_bo_map__* functions

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv: Set better descriptor set limits

Based on discussions with Jason, Ivy Bridge and Bay Trail only actually
support 16 samplers, while newer hardware can support more than the
current limit of 64. Therefore set the lower limit where needed, and
bump up to 128 for everything else. There is also a limit on the total
number of other resources of around 250.

This allows Dawn of War III to render correctly on ANV.

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv: Set driver version to Mesa version

As already done by RADV.

v2: Move version calculation function to src/vulkan/util to share with
    RADV.

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv/vulkan: Move radv_get_driver_version to src/vulkan/util

This means it can be reused for other Vulkan drivers. Also fix up a
typo, need to search for '.' in the version string rather than ','.

v2: Remove unneeded temporary version variable (Emil, Eric)

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

util/vulkan: Move Vulkan utilities to src/vulkan/util

We have Vulkan utilities in both src/util and src/vulkan/util. The
latter seems a more appropriate place for Vulkan-specific things, so
move them there.

v2: Android build system changes (from Tapani Pälli)

Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>

intel: gen-decoder: rework how we handle groups

The current way of handling groups doesn't seem to be able to handle
MI_LOAD_REGISTER_* with more than one register. This change reworks
the way we handle groups by building a traversal list on loading the
GENXML files.

Let's say you have

Instruction {
  Field0
  Field1
  Field2
  Group0 (count=2) {
    Field0-0
    Field0-1
  }
  Group1 (count=4) {
    Field1-0
    Field1-1
  }
}

We build of linked on load that goes :

Instruction -> Group0 -> Group1

All of those are gen_group structures, making the traversal trivial.
We just need to iterate groups for the right number of timers (count
field in genxml).

The more fancy case is when you have only a single group of unknown
size (count=0). In that case we keep on reading that group for as long
as we're within the DWordLength of that instruction.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

radeonsi: fix a GPU hang with tessellation on 2-CU configs

Only harvested Stoney has 2 CUs. Tested on 2-CU Stoney and Fiji forced
to 2 CUs.

Cc: 17.0 17.1 <mesa-stable@lists.freedesktop.org>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

mesa: make use of NewWindowRectangles driver flags

Now, st_update_window_rectangles() won't be called when the
scissor is going to be updated.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add new gl_driver_flags::NewWindowRectangles

This new driver flag will replace _NEW_SCISSOR which is
emitted when setting new window rectangles but it actually
triggers useless changes in the state tracker (like scissor
and rasterizer).

EXT_window_rectangles is currently only supported by Nouveau.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: remove call to Driver.Scissor() in _mesa_WindowRectanglesEXT()

This is actually useless because this driver call is only used
by the classic DRI drivers which don't support that extension
and probably won't never support it.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: only emit _NEW_MULTISAMPLE when min sample shading changes

We usually check that given parameters are different before
updating the state.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: only emit _NEW_MULTISAMPLE when sample mask changes

We usually check that given parameters are different before
updating the state.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: only emit _NEW_MULTISAMPLE when coverage parameters change

We usually check that given parameters are different before
updating the state.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Change INTEL_DEBUG=vec4 to INTEL_SCALAR_VS for consistency.

We moved to INTEL_SCALAR_* when we added more than a single stage, but
never went back and converted the VS to work that way.  Be consistent.

Also update the documentation to actually mention these debug variables.

Acked-by: Jason Ekstrand <jason@jlekstrand.net>

radv: expose integrated device type for APUs.

This just sets the vulkan device type depending on whether
this is an APU or GPU.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"

ac/surface: Fix HTILE for radv.

We always compute HTILE size using addrlib, even when not TC compatible.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlied <airlied@redhat.com>

radv: fix write event eop on vega.

Typo here, fixes command submission hangs on vega

radv: enable GFX9 on radv

I'm open to reverting this closer to release if bad things
happen, but it might be easier to debugging to leave it for now.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: turn off geom/tess for gfx9.

We don't support these yet, and it'll take a bit of work to do so.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: misc GFX9 changes.

These are just some register changes ported from radeonsi for gfx9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add some GFX9 specific events.

These are ported from radeonsi, don't know all the rules for
when they should be inserted.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add IA_MULTI_VGT_PARAM support for GFX9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add rb+ support for GFX9

This adds some rb+ support, as on GFX9 we have to disable
it as per radeonsi.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add GFX9 cache flushing support.

GFX9 needs to write event EOP to a fence buffer, allocate some
space for this, and just write an ever increasing number to it,
this isn't exactly what radeonsi does, but it seems to work.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add texture descriptor/fmask/cmask support for GFX9

This adds gfx9 support for the texture descriptor along
with the fmask/cmask allocation routines.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add GFX9 to initialisation cmd buffer.

This just adds support for initialising some GFX9 registers,
and handles the different init for the VGT reuse reg.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: don't setup raster_config on gfx9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add gfx9 cp dma support.

This adds support to the CP dma code for GFX9, ported from
radeonsi.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add gfx9 depth/stencil surface support.

This is ported from radeonsi.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add GFX9 support for color surfaces.

This is ported from radeonsi.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add some misc gfx9 pieces.

This just adds the strings and includes the gfx9 register defs
in some files that we need them in.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>