Alyssa Rosenzweig [Wed, 15 Jul 2020 01:39:06 +0000 (21:39 -0400)]
pan/mdg: Identify per-sample interpolation mode
So this is what .interp0 was this whole time.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5929>
Alyssa Rosenzweig [Fri, 10 Jul 2020 19:56:17 +0000 (15:56 -0400)]
pan/mdg: Bump compiler RT maximum
We don't actually support MRT 8x yet but we would like to soon, so bump
it in the compiler.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5929>
Roman Stratiienko [Wed, 15 Jul 2020 19:26:44 +0000 (22:26 +0300)]
Android: Fixes for Q and R
Fix Android-Q build:
- Use AOSP prebuilt bison by specifying $(BISON) variable
- Use AOSP prebuilt flex by specifying $(LEX) variable
Fix Android-R build:
- Add M4 environmet variable for Android R and higher (See [1])
[1] - https://cs.android.com/android/_/android/platform/build/+/
2bfffb9f48a78de12faf5da77424c0cecb70d6eb:Changes.md;dlc=
997661002af1282d938e88c3c723037e42e5d283
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5894>
Dave Airlie [Tue, 14 Apr 2020 04:00:11 +0000 (14:00 +1000)]
llvmpipe/format: fix snorm conversion
This fixes:
GTF-GL45.gtf33.GL3Tests.vertex_type_2_10_10_10_rev.vertex_type_2_10_10_10_rev_conversion
and
piglit
spec/arb_texture_view/rendering-formats/clear gl_rgba8_snorm as gl_r32f
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5820>
Dave Airlie [Tue, 14 Apr 2020 05:28:05 +0000 (15:28 +1000)]
gallivm/sample: always square rho before fast log2
The fast log2 works better if rho is squared, i.e.
fast_log2(sqrt(2)) == 0.4
0.5 * fast_log2(2) == 0.5
so just square rho, and always divide by 2 afterwards.
Fixes:
GTF-GL45.gtf30.GL3Tests.sgis_texture_lod.sgis_texture_lod_basic_lod_selection
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5820>
Rhys Kidd [Wed, 15 Jul 2020 13:04:32 +0000 (23:04 +1000)]
nv50_2d: regenerate envytools-based rnndb headers
The headers hadn't been regenerated from envytools in a long time,
and there were a few minor divergences.
Based on envytools commit
c20929ed0f3be18b8419f7332ee22d905feb6589
Among other things, rnndb has changed naming to G80/etc, for now
I've not tackled switching that over and replaced the nvidia
codenames back to the chip ids that mesa uses with the following:
$ sed -i 's/G80_2D/NV50_2D/g' rnndb/graph/g80_2d.xml.h
$ sed -i 's/GF100_2D/NVC0_2D/g' rnndb/graph/g80_2d.xml.h
No other modifications of the headergen'd headers was done, which
was helped by the differing #define's being unutilised presently.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5920>
Samuel Pitoiset [Sun, 12 Jul 2020 11:40:14 +0000 (13:40 +0200)]
radv: destroy the base object if VkCreateInstance() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Sun, 12 Jul 2020 11:34:39 +0000 (13:34 +0200)]
radv: destroy the base object if VkAllocateCommandBuffers() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 15:29:21 +0000 (17:29 +0200)]
radv: destroy the base object if VkCreateFence() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 15:25:00 +0000 (17:25 +0200)]
radv: destroy the base object if VkCreateSemaphore() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 15:14:30 +0000 (17:14 +0200)]
radv: destroy the base object if VkCreateEvent() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 15:11:10 +0000 (17:11 +0200)]
radv: destroy the base object if VkCreateBuffer() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 14:18:37 +0000 (16:18 +0200)]
radv: destroy the base object if VkCreateImage() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 14:04:26 +0000 (16:04 +0200)]
radv: destroy the base object if VkCreateRenderPass*() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Samuel Pitoiset [Fri, 10 Jul 2020 13:52:38 +0000 (15:52 +0200)]
radv: destroy the base object if VkCreateQueryPool() failed
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5868>
Pierre-Eric Pelloux-Prayer [Tue, 7 Jul 2020 09:08:50 +0000 (11:08 +0200)]
mesa/st: release debug_output after destroying the context
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3230
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2218
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5789>
Pierre-Eric Pelloux-Prayer [Tue, 7 Jul 2020 09:06:21 +0000 (11:06 +0200)]
mesa: add bool param to _mesa_free_context_data
The param controls whether _mesa_destroy_debug_output should be called or not.
No functional changes; this will be used by the next commit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5789>
Pierre-Eric Pelloux-Prayer [Tue, 7 Jul 2020 09:00:58 +0000 (11:00 +0200)]
mesa: rename _mesa_free_errors_data
Use the _mesa_init_XXX / _mesa_destroy_XXX pattern to clearly associate
the 2 functions.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5789>
Michel Dänzer [Tue, 14 Jul 2020 09:12:19 +0000 (11:12 +0200)]
gitlab-ci: Fix "triggered by Marge for a merge request" rule
The commit below changed the rule such that it accidentally also applied
to the non-MR pipelines created by Marge, resulting in Marge triggering
twice as many jobs as necessary.
Fixes: 549b4a3dd4ab "gitlab-ci: Automatically run pipelines for Marge
Bot pre-merge only"
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5898>
Anuj Phogat [Thu, 9 Jul 2020 22:56:25 +0000 (15:56 -0700)]
intel/ehl: Add new PCI-IDs
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Anuj Phogat [Thu, 9 Jul 2020 22:15:13 +0000 (15:15 -0700)]
intel/ehl: Rename gen_device_info struct
Renaming makes it easier to relate a pciid with device configuration.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Anuj Phogat [Thu, 9 Jul 2020 22:47:36 +0000 (15:47 -0700)]
intel/ehl: Use macro GEN11_LP_FEATURES in device info
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Anuj Phogat [Thu, 9 Jul 2020 22:00:21 +0000 (15:00 -0700)]
intel/ehl: Use GEN11_URB_MIN_MAX_ENTRIES in device info
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Icecream95 [Thu, 25 Jun 2020 10:56:14 +0000 (22:56 +1200)]
panfrost: Dual source blend support
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Icecream95 [Fri, 10 Jul 2020 11:28:21 +0000 (23:28 +1200)]
pan/mdg: Skip z/s combining for dual-source writes
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Icecream95 [Thu, 25 Jun 2020 10:21:50 +0000 (22:21 +1200)]
pan/mdg: Dual source blend input/writeout support
We write to r2, which is preseved through to the blend shader, from
where it is read. We won't worry about MRT to keep things simple.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Icecream95 [Mon, 6 Jul 2020 11:52:40 +0000 (23:52 +1200)]
pan/mdg: Add a nir pass to reorder store_output intrinsics
Real writeout stores, which break execution, need to be moved to after
dual-source stores, which are just standard register writes.
v2: Don't move stores forward, to avoid moving them to before where
their source is written.
v3: Only reorder past dual-source stores.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Icecream95 [Thu, 25 Jun 2020 10:50:15 +0000 (22:50 +1200)]
gallium: Dual source support in blend_factor_to_shader
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Icecream95 [Thu, 25 Jun 2020 10:48:32 +0000 (22:48 +1200)]
compiler: Add dual-source factors to blend_factor
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5620>
Rob Clark [Tue, 14 Jul 2020 17:36:04 +0000 (10:36 -0700)]
freedreno/ir3: DCE unused arrays
Letting unused arrays stick around confuses RA, which assigns vreg names
to the unused arrays, but then does not precolor them (because they are
unused). This leads to an assert in ra_select_reg_merged():
skqp: ../src/freedreno/ir3/ir3_ra.c:589: name_to_instr: Assertion '!name_is_array(ctx, name)' failed.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3262
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Rob Clark [Mon, 13 Jul 2020 21:49:01 +0000 (14:49 -0700)]
freedreno/a6xx: don't enable early-z/lrz if no z-test
But if shader explicitly asks for early-fragment-tests, obey it's
wishes.
Fixes a handful of skia (skqp) CTS fails (9.0_r12)
* gles_bug593049
* gles_circular_arcs_fill
* gles_circular_arcs_stroke_and_fill_square
* gles_clippedcubic2
* gles_complexclip2_path_bw
* gles_complexclip2_rrect_bw
* gles_complexclip3_complex
* gles_complexclip3_simple
* gles_crbug_691386
* gles_cubicclosepath
* gles_cubicpath
* gles_degeneratesegments
* gles_filltypespersp
* gles_innershapes_bw
* gles_inverse_paths
* gles_mixedtextblobs
* gles_onebadarc
* gles_quadclosepath
* gles_quadpath
* gles_rrect_clip_bw
* gles_scale-pixels
* gles_scaledstrokes
* gles_squarehair
* gles_strokes_zoomed
* gles_windowrectangles
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Rob Clark [Sat, 11 Jul 2020 21:22:08 +0000 (14:22 -0700)]
freedreno/ir3/ra: be better at failing
It doesn't happen much. But it's annoying when we hit an impossible
condition deep in RA 90% thru a long test run. Add some ra_assert()/
ra_unreachable() helper macros so we can bail cleanly and fail RA.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Rob Clark [Sat, 11 Jul 2020 20:27:36 +0000 (13:27 -0700)]
freedreno/a6xx: bail instead of crash for compile fails
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Rob Clark [Sat, 11 Jul 2020 20:21:36 +0000 (13:21 -0700)]
freedreno/ir3: make compile fails more visible
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Rob Clark [Sat, 11 Jul 2020 20:21:57 +0000 (13:21 -0700)]
freedreno/ir3: add missing VS driver params
Some of these only used by turnip so far, this is just for clarity.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5907>
Mike Blumenkrantz [Wed, 17 Jun 2020 21:40:04 +0000 (17:40 -0400)]
zink: enable tgsi texcoord pipe cap
this requires some modifications to the ntv slot remapping, as we definitely
don't want to reserve another 25% of the available slots for the (deprecated)
texcoord varyings
now we remap VARYING_SLOT_TEX[n] to the last available slots, which lets us avoid
needing to do permanent reservation, and we check to make sure that we haven't
seen the corresponding texcoord varying any time we emit a non-texcoord varying in
that slot
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5551>
Karol Herbst [Tue, 5 Jun 2018 12:12:55 +0000 (14:12 +0200)]
nouveau: expose HMM
v2: moved caps
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Karol Herbst [Wed, 27 May 2020 14:29:06 +0000 (16:29 +0200)]
nvc0: support PIPE_CAP_RESOURCE_FROM_USER_MEMORY_COMPUTE_ONLY
v2: rework by adding a new buffer status
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Karol Herbst [Tue, 5 May 2020 13:09:50 +0000 (15:09 +0200)]
gallium: add PIPE_CAP_RESOURCE_FROM_USER_MEMORY_COMPUTE_ONLY
With the current UAPI we only support user pointers from the compute
engines, so we need a way to express that in gallium.
v2: fix typos
v3: add allows_user_pointers helper
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Karol Herbst [Sun, 29 Jul 2018 20:06:18 +0000 (22:06 +0200)]
nouveau: enable HMM
v2: move declarations into libdrm
v3: fix typos
rework handling of how much memory to reserve
v4: remove unused parameter
unmap cutout on error and when the screen is destroyed
v5: move into screen_create
enable HMM only if CL gets enabled
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Karol Herbst [Tue, 30 Jun 2020 10:26:43 +0000 (12:26 +0200)]
ci: bump libdrm to 2.4.102
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Karol Herbst [Tue, 14 Jul 2020 15:49:00 +0000 (17:49 +0200)]
ci: need to install wget in order to download libdrm
Fixes: dcd171f5e9b ("gitlab-ci: More stable URL for kernel and ramdisk artifacts, for LAVA")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Jesse Natalie [Tue, 26 May 2020 19:21:33 +0000 (12:21 -0700)]
nir: Support load/store of temps as scratch in nir_lower_explicit_io
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5889>
Jesse Natalie [Tue, 26 May 2020 19:20:20 +0000 (12:20 -0700)]
nir: When nir_lower_vars_to_explicit_types is run on temps, update scratch_size
To allow interop with other scratch ops, append any remaining temp vars
to the end of any already-allocated scratch space.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5889>
Jesse Natalie [Tue, 14 Jul 2020 17:38:32 +0000 (10:38 -0700)]
nir_lower_io: Add addr_format_is_offset helper
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5889>
Jonathan Marek [Sat, 11 Jul 2020 19:55:12 +0000 (15:55 -0400)]
freedreno/regs: update a6xx PC regs
Update some registers in the 0x9800-0xa000 range.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5870>
Jonathan Marek [Sat, 11 Jul 2020 17:03:41 +0000 (13:03 -0400)]
freedreno/regs: update a6xx VPC regs
Update some registers in the 0x9000-0x95ff range.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5870>
Jonathan Marek [Sat, 11 Jul 2020 16:29:38 +0000 (12:29 -0400)]
freedreno/regs: update a6xx RB regs
Update some registers in the 0x8c00-0x8dff range.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5870>
Jonathan Marek [Thu, 9 Jul 2020 18:59:04 +0000 (14:59 -0400)]
freedreno/regs: update a6xx GRAS registers
Update some registers in the 0x8000-0x87ff range.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5870>
Jonathan Marek [Tue, 14 Jul 2020 14:58:56 +0000 (10:58 -0400)]
gitlab-ci: re-enable arm64_a630_vk
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5904>
Jonathan Marek [Thu, 18 Jun 2020 20:24:26 +0000 (16:24 -0400)]
turnip: remove use of tu_cs_entry for draw states
The tu_cs_entry struct doesn't match well what we want for SET_DRAW_STATE
and CP_INDIRECT_BUFFER (requires extra steps to get iova and size), so
start phasing it out.
Additionally, use newly added tu_cs_draw_state where it doesn't require any
effort (it requires a fixed size, but gets rid of the extra end_sub_stream)
Note this also changes the behavior of CmdBindDescriptorSets for compute to
emit directly in cmd->cs instead of doing through a CP_INDIRECT.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5558>
Jonathan Marek [Sat, 20 Jun 2020 00:43:50 +0000 (20:43 -0400)]
turnip: fix inconsistencies with tu6_load_state_size
The next patch assumes the correct size is returned in tu6_emit_load_state.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5558>
Jonathan Marek [Thu, 18 Jun 2020 19:41:31 +0000 (15:41 -0400)]
turnip: emit compute pipeline directly in CmdBindPipeline
There's no need to defer it, and can get rid DIRTY_COMPUTE_PIPELINE.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5558>
Jonathan Marek [Thu, 18 Jun 2020 17:07:48 +0000 (13:07 -0400)]
turnip: use DIRTY SDS bit to avoid making copies of pipeline load state ib
Some testing showed that the DIRTY bit has the desired behavior, so use it
to make things a bit simpler.
Note in CmdBindPipeline, having the TU_CMD_DIRTY_DESCRIPTOR_SETS behind a
if(pipeline->layout->dynamic_offset_count) was wrong.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5558>
Mike Blumenkrantz [Mon, 13 Jul 2020 20:35:10 +0000 (16:35 -0400)]
zink: try to handle multisampled null buffers
I don't have any tests for this that I've run into yet, so this is mostly
just guessing
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5686>
Mike Blumenkrantz [Fri, 29 May 2020 20:23:49 +0000 (16:23 -0400)]
zink: handle empty attachments
create an empty buffer and surface to reuse for the fb attachment here
this fixes most of the arb_framebuffer_object tests in piglit
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5686>
Icecream95 [Tue, 14 Jul 2020 03:06:09 +0000 (15:06 +1200)]
pan/mdg: Fix non-debug compiliation
Fixes error when the assert is optimized out:
../src/panfrost/midgard/midgard_compile.c: In function ‘output_load_rt_addr’:
../src/panfrost/midgard/midgard_compile.c:1644:1: error: control reaches end of non-void function [-Werror=return-type]
}
Closes #3270
Fixes: 7781d2c2ead ("pan/mdg: Support MRT in output load lowering")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5895>
Michel Dänzer [Tue, 14 Jul 2020 15:08:10 +0000 (17:08 +0200)]
Revert https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580
It broke the CI pipeline on master:
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/
3604314
https://gitlab.freedesktop.org/mesa/mesa/-/jobs/
3604315
Revert for now, to allow other MRs to be merged.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5905>
Karol Herbst [Tue, 5 Jun 2018 12:12:55 +0000 (14:12 +0200)]
nouveau: expose HMM
v2: moved caps
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Karol Herbst [Wed, 27 May 2020 14:29:06 +0000 (16:29 +0200)]
nvc0: support PIPE_CAP_RESOURCE_FROM_USER_MEMORY_COMPUTE_ONLY
v2: rework by adding a new buffer status
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Karol Herbst [Tue, 5 May 2020 13:09:50 +0000 (15:09 +0200)]
gallium: add PIPE_CAP_RESOURCE_FROM_USER_MEMORY_COMPUTE_ONLY
With the current UAPI we only support user pointers from the compute
engines, so we need a way to express that in gallium.
v2: fix typos
v3: add allows_user_pointers helper
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Karol Herbst [Sun, 29 Jul 2018 20:06:18 +0000 (22:06 +0200)]
nouveau: enable HMM
v2: move declarations into libdrm
v3: fix typos
rework handling of how much memory to reserve
v4: remove unused parameter
unmap cutout on error and when the screen is destroyed
v5: move into screen_create
enable HMM only if CL gets enabled
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Karol Herbst [Tue, 30 Jun 2020 10:26:43 +0000 (12:26 +0200)]
ci: bump libdrm to 2.4.102
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Mike Blumenkrantz [Sun, 14 Jun 2020 05:44:38 +0000 (01:44 -0400)]
zink: block resolve blits for depth/stencil buffers
"The format features of dstImage must contain VK_FORMAT_FEATURE_COLOR_ATTACHMENT_BIT"
- vkCmdResolveImage spec
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5888>
Mike Blumenkrantz [Sun, 14 Jun 2020 04:30:55 +0000 (00:30 -0400)]
zink: block vkCmdBlitImage usage for multi sampled blits
this is prohibited by spec
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5888>
Mike Blumenkrantz [Sun, 14 Jun 2020 04:03:31 +0000 (00:03 -0400)]
zink: try copy_region hook for blits where we can't do a regular blit or resolve
in cases where the formats match, we can likely just pass this through for now
fixes a ton of spec@!opengl 1.1@depthstencil-default_fb-blit piglit tests
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5888>
Erik Faye-Lund [Fri, 10 Jul 2020 11:08:30 +0000 (13:08 +0200)]
mesa/main: use call_once instead of open-coding
We already have a utility for this, so let's use that instead.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5879>
Erik Faye-Lund [Fri, 10 Jul 2020 11:05:32 +0000 (13:05 +0200)]
mesa/main: factor out one-time-init into a helper
This will make the next commit a bit cleaner.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5879>
Karol Herbst [Mon, 13 Jul 2020 14:24:20 +0000 (16:24 +0200)]
gv100/ir: set ftz bit on floating point operations
Fixes Unigine Heavens ambient occlusion
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5881>
Eric Engestrom [Sat, 11 Jul 2020 08:17:30 +0000 (10:17 +0200)]
meson: fix android vulkan build
Android doesn't have `pthread_cancel()` and is unlikely to ever
implement it [1], but `wsi_common_display.c` needs it (or an
alternative).
Let's just disable the platform on Android (as it used to be
before
448eb19158f483d807ef).
[1] https://android-review.googlesource.com/c/platform/bionic/+/
1215779/1/docs/status.md
Fixes: 448eb19158f483d807ef ("vulkan: automatically compile the `display` platform when available")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Nataraj Deshpande <nataraj.deshpande@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5860>
Michel Dänzer [Fri, 10 Jul 2020 15:19:00 +0000 (17:19 +0200)]
gitlab-ci: Drop dependencies:
Artifacts from jobs listed in needs: are downloaded by default, so
there's no need to list them in dependencies: as well (in fact,
https://docs.gitlab.com/ce/ci/yaml/#artifact-downloads-with-needs says
using dependencies: together with needs: is invalid, so we might have
been getting lucky...).
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5845>
Michel Dänzer [Fri, 10 Jul 2020 15:00:14 +0000 (17:00 +0200)]
gitlab-ci: Remove indirect dependencies from needs:
Tomeu discovered that GitLab 12.8 fixed the bug where jobs would
spuriously run even though some of their dependency jobs were skipped.
So we don't need to list indirect dependencies anymore.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5845>
Connor Abbott [Mon, 13 Jul 2020 10:54:36 +0000 (12:54 +0200)]
tu: Don't invalidate irrelevant state when changing pipeline
At least in the future this could let us avoid re-emitting gfx/cs
constants when the other changes. This also matches what the blob does.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5877>
Connor Abbott [Mon, 13 Jul 2020 10:51:43 +0000 (12:51 +0200)]
freedreno/a6xx: Add some documentation for shared consts
I'm not convinced we'll actually want to use this, and there may be
another enable bit in SP_UNKNOWN_AB00, but it's nice to at least write
this down in case we want to try using it in the future.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5877>
Connor Abbott [Mon, 13 Jul 2020 10:22:20 +0000 (12:22 +0200)]
freedreno/a6xx: Rename and document HLSQ_UPDATE_CNTL
It turns out that this clears CP_LOAD_STATE6 packets, including
disabling any pending loads for SS6_INDIRECT/SS6_BINDLESS (these loads
don't actually happen until the draw itself, and I'm not sure if they
happen if the state is unused by the shader) and marking constants and
UBO descriptors loaded with SS6_DIRECT as invalid. It's used very
differently from HLSQ_UPDATE_CNTL on a4xx from whence the name came, and
unlike on a4xx it's not readable, so this probably doesn't line up with
HLSQ_UPDATE_CNTL on a4xx.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5877>
Serge Martin [Sun, 3 May 2020 11:56:15 +0000 (13:56 +0200)]
clover: implements clEnqueueFillBuffer
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5897>
Serge Martin [Tue, 19 May 2020 13:56:15 +0000 (15:56 +0200)]
clover: add more cl_mem_object_type to pipe_texture_target mapping
It avoid unnecessary CL_INVALID_VALUE return from clGetSupportedImageFormats
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5897>
Samuel Pitoiset [Mon, 13 Jul 2020 18:09:15 +0000 (20:09 +0200)]
radv: add the custom border color BO to the list of buffers
The buffer was never added to the list of buffers. This might lead to
VM faults and GPU hangs.
Found this by luck.
Fixes: 57e796a12a8 ("radv: Implement VK_EXT_custom_border_color")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5884>
Kristian H. Kristensen [Tue, 14 Jul 2020 03:06:25 +0000 (20:06 -0700)]
freedreno/registers: Rename SP_2D_SRC_FORMAT
This register contains information about the destination format, so
let's rename to SP_2D_DST_FORMAT.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 23:25:30 +0000 (16:25 -0700)]
freedreno/a6xx: Split clear and blit texture into different functions
Now that most of the state programming is in shareable helpers, we can
split emit_blit_or_clear_texture into emit_blit_texture and
fd6_clear_surface.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:54:33 +0000 (15:54 -0700)]
freedreno/a6xx: Don't take pipe_blit_info in emit_blit_dst
We only need a few fields and we'll want to use this in cases where we
don't have a pipe_blit_info.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:18:32 +0000 (15:18 -0700)]
freedreno/a6xx: Program RB_UNKNOWN_8C01 in setup helper
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:18:01 +0000 (15:18 -0700)]
freedreno/a6xx: Move CP_SET_MARKER to setup helper
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:12:25 +0000 (15:12 -0700)]
freedreno/a6xx: Move REG_A6XX_SP_2D_SRC_FORMAT programming to helper
Rename helper to emit_blit_setup().
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:07:39 +0000 (15:07 -0700)]
freedreno/a6xx: Program A6XX_SP_2D_SRC_FORMAT_COLOR_FORMAT based on dst format
It's a badly named register...
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 22:00:34 +0000 (15:00 -0700)]
freedreno/a6xx: Make blit_control helper a little more helpful
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Fri, 3 Jul 2020 21:34:28 +0000 (14:34 -0700)]
freedreno/a6xx: Enable FMT6_10_10_10_2_UNORM blitting
Now that we correctly program the _DEST version for the blit
destination and use float16 internal format, these formats work with
the blitter.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 20:42:58 +0000 (13:42 -0700)]
freedreno/a6xx: Separate stencil sysmem clear fix
We need to clear with PIPE_FORMAT_S8_UINT.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 11:13:27 +0000 (04:13 -0700)]
freedreno/a6xx: Don't emit src state when clearing
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 11:03:16 +0000 (04:03 -0700)]
freedreno/a6xx: Consolidate computing blit_cntl
Compute the blit_cntl value in one place and group it with the
register writes.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 11:00:42 +0000 (04:00 -0700)]
freedreno/a6xx: Program SP_2D_SRC_FORMAT outside blit loop
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 10:54:58 +0000 (03:54 -0700)]
freedreno/a6xx: Set src and dst rects outside blit loop
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 10:49:57 +0000 (03:49 -0700)]
freedreno/a6xx: Don't set unknown bit when tiling differs
There is a bit here that's sometimes set, but it's generally not
related to whether tiling differs between src and dst. Let's stop
setting it until we know more.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 10:42:19 +0000 (03:42 -0700)]
freedreno/a6xx: Split out src and dst setup helpers for blit
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Thu, 2 Jul 2020 10:05:12 +0000 (03:05 -0700)]
freedreno/a6xx: Move fd6_ifmt into fd6_blitter.c
It's only used in this file.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Kristian H. Kristensen [Wed, 1 Jul 2020 21:50:52 +0000 (14:50 -0700)]
freedreno/a6xx: Don't blit with R2D_RAW
Map all formats to a valid ifmt. FMT6_10_10_10_2_UNORM_DEST still
doesn't work on the blitter so keep that one on the u_blitter path.
Fixes
dEQP-GLES31.functional.draw_buffers_indexed.random.max_implementation_draw_buffers.*
with FD_MESA_DEBUG=nogmem.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5717>
Jonathan Marek [Tue, 7 Jul 2020 17:12:14 +0000 (13:12 -0400)]
turnip: drop GS clear path
We didn't know how to write layer id without GS, since that's the only way
to do it through VK/GL, and the blob didn't implement this clear case (and
failed cases where it was absolutely necessary). However now we know how to
set it after some educated guesses and looking at tess/geom traces, so the
GS path can be dropped.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5790>
Jonathan Marek [Tue, 7 Jul 2020 14:37:40 +0000 (10:37 -0400)]
turnip: clean up primitive output state
We only need to emit one set of primitive output registers. This may differ
from the blob, because it seems to try to allow using the same pipeline
with tess/geom enabled/disabled.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5790>
Jonathan Marek [Tue, 7 Jul 2020 04:08:33 +0000 (00:08 -0400)]
freedreno/regs: update primitive output related registers
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5790>
Eric Anholt [Wed, 8 Jul 2020 20:49:31 +0000 (13:49 -0700)]
freedreno/ir3: Fix uninit var warning.
It's a decent bit of analysis to see that the initialization will always
happen, and my compiler isn't doing so in at least one configuration.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5834>
projects / mesa.git / log