st/mesa: add atomic AoA support

reuse the sampler deref handling code to do the same
thing for atomics.

Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: drop unused nonconst sampler functions.

Since we fixed the glsl->tgsi conversion we no longer need
this function.

Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: handle indirect samplers in arrays/structs properly (v4.1)

The state tracker never handled this properly, and it finally
annoyed me for the second time so I decided to fix it properly.

This is inspired by the NIR sampler lowering code and I only realised
NIR seems to do its deref ordering different to GLSL at the last
minute, once I got that things got much easier.

it fixes a bunch of tests in
tests/spec/arb_gpu_shader5/execution/sampler_array_indexing/

v2: fix AoA tests when forced on.
I was right I didn't need all that code, fixing the AoA code
meant cleaning up a chunk of code I didn't like in the array
handling.

v3: start generalising the code a bit more for atomics.
v3.1: use UniformRemapTable

v4: handle uniforms differently using the param_index,
and go back to UniformStorage
fix issues identified by Timothy with deref handling.
v4.1: squash const fix and move handling 1D const out
of recursive function.

Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl/ir: add param index to variable.

We have a requirement to store the index into the mesa parameterlist
for uniforms. Up until now we've overwritten var->data.location with
this info. However this then stops us accessing UniformStorage,
which is needed to do proper dereferencing.

Add a new variable to ir_variable to store this value in, and change
the two uses to use it correctly.

Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965: Rename define for the PIPE_CONTROL DC flush bit.

Its previous name was somewhat misleading, this really behaves like a
RW cache flush rather than an invalidation.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Invalidate state cache before L3 partitioning set-up.

The state cache is also L3-backed so it seems sensible to make sure
it's clean as we do for other RO caches before repartitioning the L3.
This wasn't part of my original L3 partitioning code because I was
able to reproduce hangs on Gen7 hardware when the state cache
invalidation happened asynchronously with previous 3D rendering, which
should no longer be possible after the previous change.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix cache pollution race during L3 partitioning set-up.

We need to split the stalling flush from the RO cache invalidation
into a different PIPE_CONTROL command to make sure that the top of the
pipe invalidation happens after any previous rendering is complete.
Otherwise it's possible for previous rendering to pollute the L3 cache
in the short window of time between RO invalidation and the completion
of the stalling flush.  Fixes rendering artifacts on Unigine Heaven,
Metro Last Light Redux and Metro 2033 Redux.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93540
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93599
Tested-by: Darius Spitznagel <d.spitznagel@goodbytez.de>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Don't emit unnecessary SEL instruction from emit_image_atomic().

The SEL instruction with predication mode NONE emitted when the atomic
operation doesn't need to be predicated is a no-op and might rely on
undocumented hardware behaviour.  Noticed by chance while looking at
the assembly output.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: Update vec4 unit tests for commit 01dacc83ff.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94050

dri/common: include debug_output.h to silence warning

tgsi: minor whitespace fixes in tgsi_scan.c

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

tgsi: s/true/TRUE/ in tgsi_scan.c

Just to be consistent.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

tgsi: use switches instead of big if/else ifs

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

tgsi: break gigantic tgsi_scan_shader() function into pieces

New functions for examining instructions, declarations, etc.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

st/mesa: minor formatting fixes in st_cb_bitmap.c

mesa: move GL_ARB_debug_output code into new debug_output.c file

The errors.c file had grown quite large so split off this extension
code into its own file.  This involved making a handful of functions
non-static.

Acked-by: Timothy Arceri <timothy.arceri@collabora.com>

gallium/util: whitespace, formatting fixes in u_debug_stack.c

gallium/util: whitespace, formatting fixes in u_staging.[ch] files

Still some nonsensical comments.

gallium/util: switch over to new u_debug_image.[ch] code

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/util: put image dumping functions into separate file

To try to reduce the clutter in u_debug.[ch]

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/util: whitespace, formatting fixes in u_debug.c

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

trace: add missing pipe_context::clear_texture()

This fixes a crash with bin/arb_clear_texture-base-formats and
probably some other tests which use clear_texture().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

trace: remove useless MALLOC() in trace_context_draw_vbo()

There is no need to allocate memory when unwrapping the indirect buf.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/extensions: Fix NVX_gpu_memory_info lexicographical order.

Fixes MesaExtensionsTest.AlphabeticallySorted.

Fixes: 1d79b9958090 ("mesa: implement GL_NVX_gpu_memory_info (v2)")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94016
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: return cloned signature, not the builtin one

The builtin data can get released with a glReleaseShaderCompiler call.
We're careful everywhere to clone everything that comes out of builtins
except here, where we accidentally return the signature belonging to the
builtin version, rather than the locally-cloned one.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org

glsl: make sure builtins are initialized before getting the shader

The builtin function shader is part of the builtin state, released
when glReleaseShaderCompiler is called. We must ensure that the
builtins have been (re)initialized before attempting to link with the
builtin shader.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Tested-by: Rob Herring <robh@kernel.org>
Cc: mesa-stable@lists.freedesktop.org

tgsi: use TGSI_WRITEMASK_XYZW instead of hardcoding the mask

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Serge Martin <edb+mesa@sigluy.net>

glsl: don't generate transform feedback candidate when not required

If we are not even looking for one don't bother generating a candidate
list.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: replace unreachable code with an assert()

All interface blocks will have been lowered by this point so just
use an assert. Returning false would have caused all sorts of
problems if they were not lowered yet and there is an assert to
catch this later anyway.

We also update the tests to reflect this change.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

r600, compute: Do not overwrite pipe_resource.screen

found by inspection.

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

r600g: Ignore format for PIPE_BUFFER targets

Fixes compute since 7dd31b81fee7fe40bd09cf3fbc324fcc32782479
gallium/radeon: support PIPE_CAP_SURFACE_REINTERPRET_BLOCKS

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

mesa/get: fix a breakage after rebase

trivial.

i965/vec4: don't copy ATTR into 3src instructions with complex swizzles

The vec4 backend, at the end, does this:

    if (inst->is_3src()) {
       for (int i = 0; i < 3; i++) {
          if (inst->src[i].vstride == BRW_VERTICAL_STRIDE_0)
             assert(brw_is_single_value_swizzle(inst->src[i].swizzle));

So make sure that we use the same conditions when trying to
copy-propagate. UNIFORMs will be converted to vstride 0 in
convert_to_hw_regs, but so will ATTRs when interleaved (as will happen
in a GS with multiple attributes). Since the vstride is not set at
copy-prop time, infer it by inspecting dispatch_mode and reject ATTRs if
they have non-scalar swizzles and are interleaved.

Fixes assertion errors in dolphin-generated geometry shaders (or
misrendering on opt builds) on Sandybridge or on IVB/HSW with
INTEL_DEBUG=nodualobj.

Co-authored-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93418
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>

docs/relnotes: document memory info extensions

gallium/radeon: implement query_memory_info (v2)

v2: don't use DIV_ROUND_UP (no so useful)
    also return eviction stats

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

st/mesa: implement and enable memory info extensions (v2)

v2: assert and return if query_memory_info is not set
    rebase

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

mesa: implement GL_ATI_meminfo (v2)

v2: rebase

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

mesa: implement GL_NVX_gpu_memory_info (v2)

v2: implement eviction queries properly
    add gl_memory_info structure

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gallium: add interface for querying memory usage and sizes (v2)

If you're worried about the duplication of some CAPs, we can remove them
later.

v2: add fields for memory eviction stats

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gallium/radeon: remove radeon_info::r600_tiling_config

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: get pipe_interleave_bytes AKA group_bytes from the winsys

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: set num_banks in the winsys

amdgpu doesn't have to set this, because radeonsi gets it from tile mode
arrays by default.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: just get num_tile_pipes from the winsys

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: add an assertion to cik_get_num_tile_pipes (v2)

v2: print an error to stderr

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: remove an r600-only setting

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: rename & reorder members of radeon_info

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

mesa: Fix locking of GLsync objects.

GLsync objects had a race condition when used from multiple threads
(which is the main point of the extension, really); it could be
validated as a sync object at the beginning of the function, and then
deleted by another thread before use, causing crashes. Fix this by
changing all casts from GLsync to struct gl_sync_object to a new
function _mesa_get_and_ref_sync() that validates and increases
the refcount.

In a similar vein, validation itself uses _mesa_set_search(), which
requires synchronization -- it was called without a mutex held, causing
spurious error returns and other issues. Since _mesa_get_and_ref_sync()
now takes the shared context mutex, this problem is also resolved.

Fixes bug #92757, found while developing Nageru, my live video mixer
(due for release at FOSDEM 2016).

v2: Marek: silence warnings, fix declaration after code

Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: add placeholder MC and SRBM performance counter groups

Yet another change motivated by AMD GPUPerfStudio compatibility. These groups
are not directly accessible from userspace, and AMD GPUPerfStudio does not
actually query them - it just requires them to be there. Hence, adding
a placeholder for now.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: re-order the SQ_xx performance counter blocks

This is yet another change motivated by appeasing AMD GPUPerfStudio's
hardcoding of performance counter group numbers.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: re-order the perfcounter hardware blocks

As documented in the comment, AMD GPUPerfStudio unfortunately hardcodes the
order of performance counter groups. Let's do the pragmatic thing and present
the same order as Catalyst/Crimson.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: add GPIN driver query group

This group was used by older versions of AMD GPUPerfStudio (via
AMD_performance_monitor) to identify the GPU family, and GPUPerfStudio
still complains when it isn't available.

Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Allow dumping LLVM IR before optimization passes

Set R600_DEBUG=preoptir to dump the LLVM IR before optimization passes,
to allow diagnosing problems caused by optimization passes.

Note that in order to compile the resulting IR with llc, you will first
have to run at least the mem2reg pass, e.g.

opt -mem2reg -S < shader.ll | llc -march=amdgcn -mcpu=bonaire

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> (original patch)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (w/ debug flag)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: emit LLVM `ret void` before radeon_llvm_finalize_module

This allows dumping a consumable LLVM module before the initial optimization
passes are run.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: bail out of try_pbo_upload_common when constant upload fails

Also fixes a resource leak when an upload_mgr is used for constants.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: bail out of try_pbo_upload_common when vertex upload fails

At the same time, fix a memory leak noticed by Ilia Mirkin.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: reduce the scope of sampler_view in try_pbo_upload_common

We can get rid of our reference immediately, since the driver will hold
onto it for us.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: do uploads earlier in try_pbo_upload_common

While rather unlikely, uploads _can_ fail. Doing them earlier means
we'll have to restore less state when they do fail, and it's slightly
easier to check the restore code.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

main: Use a derived value for the default sample count

Previously the framebuffer default sample count was taken directly
from the value given by the application. On the i965 driver on HSW if
the value wasn't one that is supported by the hardware it would hit an
assert when it tried to program the state for it. This patch fixes it
by adding a derived sample count to the state for the default
framebuffer. The driver can then quantize this to one of the valid
values in its UpdateState handler when the _NEW_BUFFERS state changes.
_mesa_geometric_samples is changed to use the new derived value.

Fixes the piglit test arb_framebuffer_no_attachments-query

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93957
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

program: Use _mesa_geometric_samples to calculate gl_NumSamples

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

main: Use _mesa_geometric_samples to calculate GL_SAMPLE_BUFFERS

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

main: Use _mesa_geometric_samples to calculate the value of GL_SAMPLES

Otherwise it won't take into account the default samples for
framebuffers with no attachments.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: avoid negatives in PUSH_SPACE argument

Fixup to commit 03b3eb90d - the number of buffers could be larger than
the number of elements, in which case we'd pass a negative argument to
PUSH_SPACE, which would be bad. While we're at it, merge it with the
other PUSH_SPACE at the top of the function.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0: add some missing PUSH_SPACE's

nvc0_vbo has explicit push space checking enabled, so we must run
PUSH_SPACE by hand. A few spots missed that.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0/ir: fix converting between predicate and gpr

The spill logic will insert convert ops when moving between files. It
seems like the emission logic wasn't quite ready for these converts.

Tested on fermi, and visually looked at nvdisasm output for maxwell.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

nvc0: add support for ARB_query_buffer_object

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: add query buffer support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add PIPE_CAP_QUERY_BUFFER_OBJECT

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add a way to store query result into buffer

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add core implementation of ARB_query_buffer_object

Forwards query result writes to drivers.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add driver interface for writing query results to buffers

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Handle QUERY_BUFFER_BINDING in GetIntegerv

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: move to GL/GL_CORE section]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Add QueryBuffer to context

Add QueryBuffer and initialise it to NullBufferObj on start

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: also release QueryBuffer on free]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Add ARB_query_buffer_object extension flag

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: add string to extensions.c]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glapi: Add xml infrastructure for ARB_query_buffer_object

Signed-off-by: Rafal Mielniczuk <rafal.mielniczuk2@gmail.com>
[imirkin: move definition to gl_API.xml as it is very short]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: simplify setting of image access qualifiers

Cc: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

mesa: remove dead program parameter functions

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

st/nine: Use align_free when needed

Use align_free to free memory allocated
with align_malloc.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Disallow non-argb8888 cursors

Only argb8888 cursors are allowed.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Enforce centroid for color input when multisampling is on

The color inputs must automatically use centroid whether
multisampling is used or not.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix centroid flag

sem.reg.mod & NINED3DSPDM_CENTROID is worth 4 when
centroid is requested, whereas
TGSI_INTERPOLATE_LOC_CENTROID is worth 1.

Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Use fast clears more often for MRTs

This enables to use fast clears in the following
case:

pixel shader renders to 1 RT
4 RT bound
clear
new pixel shader bound that renders to 4 RTs

Previously the fast clear path wouldn't be hit,
because when trying the fast clear path,
the framebuffer state would be configured for 1 RT,
instead of 4.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Use linear filtering for shadow mapping

Some docs say linear filtering is always used when
app does shadow mapping.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Respect block alignment on surface lock

Respect block alignment for ATI1/ATI2 format when trying to lock a
surface using LockRect().
Fixes failing WINE tests device.c test_surface_blocks() tests.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Add Render state validation layer

Testing Win behaviour seems to show wrong states
are accepted, but then depending on the states
some specific 'good' behaviours happen.

This adds some validation to catch invalid
states and have these 'good' behaviours
when it happens.

Also reorders SetRenderState to match the expected
optimisation:
(Value == previous Value) => return immediately,
which affects D3D9 hacks too.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Patrick Rudolph <siro@das-labor.org>

DRI_CONFIG: Add option to override vendor id

Add config option override_vendorid to report a fake card in d3dadapter9 drm.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Implement NineDevice9_GetAvailableTextureMem

Implement a device private memory counter similar to Win 7.

Only textures and surfaces increment vidmem and may return
ERR_OUTOFVIDEOMEMORY. Vertexbuffers and indexbuffers creation always
succeedes, even when out of video memory.

Fixes "Vampire: The Masquerade - Bloodlines" allocating resources until crash.
Fixes "Age of Conan" allocating resources until crash.
Fixes failing WINE test device.c test_vidmem_accounting().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Handle Window Occlusion

Apps can know if the window is occluded by checking for
specific error messages. The behaviour is different
for Device9 and Device9Ex.

This allow games to release the mouse and stop rendering
until the focus is restored.

In case of multiple swapchain we do care only of the device one.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Store minor version num

To keep compatible with older ID3DPresent interfaces (used to talk
with Wine), store the minor version num accessible to all
statetracker functions (in the NineDevice9 structure).

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Call flush_resource before flush

flush_resource needs to be called before flush (for
fast clear resolve, etc).

Removes useless computation of resource (it is
already set correctly).

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix remaining swapchain tests

Return D3DERR_INVALIDCALL instead of E_POINTER.
On error set ppBackBuffer to NULL.

Multiple swapchains can only be created in windowed mode as
windowed swapchain.

Set backbuffer to NULL in NineDevice9_GetBackBuffer, but not
in NineSwapChain9_GetBackBuffer.

This fixes all WINE's device.c test_swapchain() tests.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix crash NineDevice9_CreateAdditionalSwapChain

When no window is specified, we should revert to the focus window.

This deserves more tests however (what if the device swapchain is
already using the focus window ?)

Fixes crash for FFXIV

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Fix possible crash on error

In case swapchain creation fails This->swapchains[i] might be NULL and
causes a crash.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Test more presentation params

Return errors in case of invalid presentation parameters.
Fixes failing WINE tests device.c test_swapchain_parameters().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix resource9 private data

Store a copy of GUID in the header that is under our control and use it
as key for the hashtable instead of using the application provided pointer.
The application might change the memory after leaving the function.

Fixes a crash for issue https://github.com/iXit/Mesa-3D/issues/130

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Print GUID instead of pointer

To ease debugging print the GUID instead of the pointer to it.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix use of uninitialized memory

The values of box.z and box.depth weren't set and lead to a crash.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix clear for multisample mismatch depth-stencil

Tests show in case of multisample mismatch between the depth-stencil
buffer and the render target, then it is not cleared.

Fixes failing WINE test visual.c test_multisample_mismatch().

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix Volumetexture9_LockBox

Check for valid locked box dimensions.

Fixes failing wine tests device.c test_lockbox_invalid.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix ATI2 pitch for non-square

Fixes crash for non-square textures.
We were using the height instead of the
width for some calculations.

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

st/nine: Support D3DFMT_R8G8B8

Add support for D3DFMT_R8G8B8. It allows format conversion for
surfaces of pool scratch.

Usually gallium formats equivalents for d3d9 formats
have their names reversed.

The gallium format PIPE_FORMAT_R8G8B8_UNORM is the right
equivalent here, and its name is likely wrong (reversed).

Fixes a crash in TmNationsForever.

Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Axel Davy <axel.davy@ens.fr>