radv: Don't set a new subpass on compute resolve.

We don't use the render path so totally unneeded.

Fixes: 19be95f71e6 "radv: add subpass resolve compute path"
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Remove some intel comments from the resolve code.

These are clearly not applicable to radv.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

egl/drm: Don't "fall back" to /dev/dri/card0 if the first open fails

The snprintf stuff here already constructs the right name for the device
node, and if it doesn't, you configured Mesa wrong, don't do that.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Use GEN_GEN and GEN_IS_HASWELL in genX_state_upload.c code.

We were using brw->gen, brw->is_haswell, and devinfo->gen in a few
places, when we could just use GEN_GEN and GEN_IS_HASWELL, which are
evaluated at compile time.

Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>

i965: Do not store SRC after 0 on component control.

The PRM SKL-Vol 2b-05.16 says:

   "Within a VERTEX_ELEMENT_STATE structure, if a Component Control
   field is set to something other than VFCOMP_STORE_SRC, no
   higher-numbered Component Control fields may be set to
   VFCOMP_STORE_SRC. In other words, only trailing components can be set
   to something other than VFCOMP_STORE_SRC."

Since we set the component 1 to VFCOMP_STORE_0 on gen8+, and
VFCOMP_STORE_IID on gen5+, and we are not using components 2 and 3,
let's also set them to VFCOMP_STORE_0.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

mesa: Implement GL_ARB_polygon_offset_clamp

Semantically identical to the EXT version (whose string is still valid
for GLES), so rename the bit but expose both extension strings.
(Suggested by Ilia Mirkin and Ian Romanick.)

v3: Fix the entrypoint alias in GL4x.xml (Ilia)

Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: Implement GL_ARB_texture_filter_anisotropic

The only difference from the EXT version is bumping the minmax to 16, so
just hit all the drivers at once.

v2: Fix driver names, add to 17.3 release notes (Ilia Mirkin)

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/u_threaded: fix a typo

khronos/egl: remove dependency on Android NDK header

Khronos: https://github.com/KhronosGroup/EGL-Registry/pull/22
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

Revert "egl/android: add missing include"

This reverts commit 688d866eca8943f09cd846ffb045e18f6ec0677c.

The include I added in 688d866eca isn't actually useful, as it only
declares the opaque struct ANativeWindow.
However, this caused build issues for android-x86 [1] due to the header
being moved in Android O.

[1] https://lists.freedesktop.org/archives/mesa-dev/2017-August/167626.html

Fixes: 688d866eca8943f09cd8 "egl/android: add missing include"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

mesa: add KHR_no_error support to glBindBufferOffsetEXT()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add bind_buffer_offset() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glTransformFeedbackVaryings()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add transform_feedback_varyings() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glResumeTransformFeedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add resume_transform_feedback() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glPauseTransformFeedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add pause_transform_feedback() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glEndTransformFeedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add end_transform_feedback() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glBeginTransformFeedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add begin_transform_feedback() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add KHR_no_error support to glBindTransformFeedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add bind_transform_feedback() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: port the LastLookedUpVAO optimisation to _mesa_lookup_vao()

It was only used in the errors path.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: don't error check the default buffer object in glBindBufferOffsetEXT()

An allocation check is already done when the buffer is created at
context creation.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add _fallback suffix to the default transform feedback functions

In preparation for KHR_no_error support.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: remove unnecessary check in _mesa_init_transform_feedback_object()

All callers already check that, and the common behaviour is to
check in the _mesa_new_XXX() helpers anyway.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: check allocation failures in new_transform_feedback()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: remove unused _mesa_validate_transform_feedback_buffers()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

egl/wayland: Use roundtrips when awaiting buffer release

In get_back_bo, we use wl_display_dispatch_queue() to block and wait for
a buffer release event. However, not all Wayland compositors flush the
client socket on posting a buffer-release event, so by only blocking
client-side, we may block indefinitely, or at least need to wait for an
input event / frame completion to arrive for the compositor to flush.

We now use dispatch_queue as a first pass, but if our entire buffer pool
is exhausted, use a roundtrip (an immediately-triggered wl_callback) to
ensure that the compositor flushes out our release event immediately.

[daniels: Modified comment and commit message.]

Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
CC: <mesa-stable@lists.freedesktop.org>

glsl: fix glsl_struct_field size calculations for shader cache

Found by address sanitizer:

==22621==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61400000cbd8 at pc 0x7f561610a4ff bp 0x7ffca85f9d50 sp 0x7ffca85f94f8
READ of size 344 at 0x61400000cbd8 thread T0
    #0 0x7f561610a4fe  (/usr/lib/x86_64-linux-gnu/libasan.so.3+0x5f4fe)
    #1 0x7f560bb305a5 in memcpy /usr/include/x86_64-linux-gnu/bits/string3.h:53
    #2 0x7f560bb305a5 in blob_write_bytes ../../../mesa-src/src/compiler/glsl/blob.c:136
    #3 0x7f560be7d7ff in encode_type_to_blob ../../../mesa-src/src/compiler/glsl/shader_cache.cpp:153
    #4 0x7f560be81222 in write_program_resource_data ../../../mesa-src/src/compiler/glsl/shader_cache.cpp:950
    #5 0x7f560be81222 in write_program_resource_list ../../../mesa-src/src/compiler/glsl/shader_cache.cpp:1118
    #6 0x7f560be81222 in shader_cache_write_program_metadata(gl_context*, gl_shader_program*) ../../../mesa-src/src/compiler/glsl/shader_cache.cpp:1407
    #7 0x7f560b825fdb in link_program ../../../mesa-src/src/mesa/main/shaderapi.c:1163

Fixes: 073a84ff60db ("glsl: stop adding pointers from glsl_struct_field to the cache")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

a2xx: fix DST_ALPHA blending for non-alpha formats

If we're rendering to a format without alpha, convert DST_ALPHA blend to
a ONE so that factors are properly computed. This same workaround is
done on a3xx+ as well.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

a2xx: set constant blend color

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

radeonsi: set IF_THRESHOLD to 4

In 74e39de9324d it was set to 3 and it was reported that 4 caused
tesseract to start spilling VGPRs. This no longer seems to be the
case.

Totals:
SGPRS: 2787844 -> 2787764 (-0.00 %)
VGPRS: 1713121 -> 1712717 (-0.02 %)
Spilled SGPRs: 7532 -> 7532 (0.00 %)
Spilled VGPRs: 49 -> 33 (-32.65 %)
Private memory VGPRs: 2060 -> 2060 (0.00 %)
Scratch size: 2200 -> 2180 (-0.91 %) dwords per thread
Code Size: 79265520 -> 79248360 (-0.02 %) bytes
LDS: 436 -> 436 (0.00 %) blocks
Max Waves: 670535 -> 670608 (0.01 %)
Wait states: 0 -> 0 (0.00 %)

Before:
 VGPR SPILLING APPS   Shaders SpillVGPR  PrivVGPR ScratchSize
 EffectsCaveDemo          301         0       256       264
 ReflectionsSubwayDemo    264         0       256       264
 VehicleGame              295         0       128       132
 bioshock-infinite       1140         0       448       516
 dirt-showdown            453        33         0        28
 gang-beasts              364         0       500       496
 kerbal-space-program    1228         0       472       480
 tomb-raider-ultra       1199        16         0        20

After:
 VGPR SPILLING APPS   Shaders SpillVGPR  PrivVGPR ScratchSize
 EffectsCaveDemo          301         0       256       264
 ReflectionsSubwayDemo    264         0       256       264
 VehicleGame              295         0       128       132
 bioshock-infinite       1140         0       448       516
 dirt-showdown            453        33         0        28
 gang-beasts              364         0       500       496
 kerbal-space-program    1228         0       472       480

The only change in VGPR spills is the elimination of all spills
in Tomb Raider at Ultra settings. Closer examination shows that
the shaders go over the limit because they contain three
expressions a mul, rcp and ubo load. The ubo load is actually
used elsewhere and is therefore stored in a temp already in IR
such as tgsi but glsl ir counts it agaist the if cost.

Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>

util/disk_cache: write cache item metadata to disk

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: pass shader source keys to the disk cache

We don't actually write them to disk here. That will happen in the
following commit.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

util/disk_cache: add struct cache_item_metadata

This will be used to store more information about the cache item
in it's header. This information is intended for 3rd party and
cache analysis use but can also be used for detecting the unlikely
scenario of cache collisions.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

disk_cache: enable limited hash collision detection in release builds

It really doesn't cost us much and will stop strange crashes should
the stars align.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

util/disk_cache: rename mesa cache dir and introduce cache versioning

Steam is already analysing cache items, unfortunatly we did not
introduce a versioning mechanism for identifying structural changes
to cache entries earlier so the only way to do so is to rename the
cache directory.

Since we are renaming it we take the opportunity to give the directory
a more meaningful name.

Adding a version field to the header of cache entries will help us to
avoid having to rename the directory in future. Please note this is
versioning for the internal structure of the entries as defined in
disk_cache.{c,h} as opposed to the structure of the data provided to
the disk cache by the GLSL compiler and the various driver backends.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radv: don't crash if we have no framebuffer

Recording secondaries with no framebuffer attachment may
make this happen, though this might not be the complete solution.

(esp if someone does meta stuff in there, would we have to
save things, not sure).

Fixes: f4e499ec791 ("radv: add initial non-conformant radv vulkan driver")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: gfx9 has buffer sizing rules like pre-VI.

This fixes:
dEQP-VK.robustness.buffer_access.* on GFX9.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: fix predication on gfx9

When I added gfx9 I did it wrong, this fixes it.

Fixes: 5247b311e9 "radv/gfx9: fix set predication packet."
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

anv,i965: Move CS shared lowering into anv

Right now, OpenGL uses the GLSL lowering for shared variables and anv
uses NIR to lower them.  For a long time, we've done this weird thing
where we do the NIR lowering unconditionally and then add the SLM sizes
from the two together.  This works because one of them will always be 0
but it's a bit sketchy.  Let's just move the NIR-based lowering into
anv_pipeline and get rid of the sketch.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

ac/debug: use util_strchrnul() to fix android build error

Similar to e09d04cd56 "radeonsi: use util_strchrnul() to fix android build error"

Android Bionic does not support strchrnul() string function,
gallium auxiliary util/u_string.h provides util_strchrnul()

This change avoids the following warning and error:

external/mesa/src/amd/common/ac_debug.c:501:15: warning: implicit declaration of function 'strchrnul' is invalid in C99
                char *end = strchrnul(out, '\n');
                            ^
external/mesa/src/amd/common/ac_debug.c:501:9: error: incompatible integer to pointer conversion initializing 'char *' with an expression of type 'int'
                char *end = strchrnul(out, '\n');
                      ^     ~~~~~~~~~~~~~~~~~~~~
1 warning and 1 error generated.

Fixes: c2c3912410 "ac/debug: annotate IB dumps with the raw values"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>

radeonsi: get the raster config from AMDGPU on SI

Not sure yet if we wanna do this on CIK and VI too.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: clean up setting GRBM_GFX_INDEX

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move PA_SC_RASTER_CONFIG emission into a separate function

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Android: fix Android O version check for LLVM

With the release of O, the MESA_ANDROID_MAJOR_VERSION has changed to 8.
Change the LLVM check to match. There's no point to continue to support 'O'
as no one is going to use an old AOSP master.

Presumably, we'll be back here again to fix things again for P (or 9).

Reviewed-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Rob Herring <robh@kernel.org>

include: Sync Khronos headers for OpenGL 4.6

Taken from c21e602b9fda1d3bbaecb08194592f67e6a0649b from
OpenGL-Registry. (This time without breaking glext.h.)

Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>

radv: Expose VK_KHX_multiview.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Implement multiview draws.

v2: - Use for_each_bit.
    - split emitting the draw packets out to separate functions.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Implement determining the has_multiview_view_index key.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: Add shader support for multiviews.

It uses an user SGPR to pass the view index to the shaders, except
for the fragment shader where we use layer=view (which comes in
handy when we want to do the NV ext that allows us to execute pre-FS
stages once instead of per view).

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Add multiview clears.

v2: Use for_each_bit.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Store multiview info in renderpass.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: Make shader key a struct.

Some bits can be passed to almost every shader, and I don't like
adding 5 variables.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Use 0 for the layer id if the vertex shader does not export it.

To use when we have e.g. input attachments, but there is no layer
export in the previous shader and hence no layered rendering.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: Implement input attachments with layered rendering.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: Determine if input attachments are used in the info pass.

Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: Cast sources of integer ops to int.

The int32->float semantic conversion got dropped in a testcase,
because the src was already float. On closer inspection I decided
to add a few more casts for integer op operands to be safe too.

Cc: 17.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

Revert "include: Sync Khronos headers for OpenGL 4.6"

Broke the BUILDING_MESA bit, oops.

This reverts commit ef1e87e6cdbd80e74a8bc6d48b0b174a0812fe69.

include: Sync Khronos headers for OpenGL 4.6

Taken from c21e602b9fda1d3bbaecb08194592f67e6a0649b from
OpenGL-Registry.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>

dri: fix typo

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: add missing `const` in function signature

Gets rid of a few warnings of the form:
  src/mesa/drivers/dri/i965/intel_screen.c:918:49: warning: passing argument 2 of ‘modifier_is_supported’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
          !modifier_is_supported(&screen->devinfo, f, 0, modifier))
                                                   ^
  src/mesa/drivers/dri/i965/intel_screen.c:301:1: note: expected ‘struct intel_image_format *’ but argument is of type ‘const struct intel_image_format *’

Fixes: 1efd73df39b39589d26f "i965: Advertise the CCS modifier"
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

egl/android: add missing include

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Rob Herring <robh@kernel.org>

vbo: fix glVertexAttrib(index=0)

Depending on which extension or GL spec you read the behavior of
glVertexAttrib(index=0) either sets the current value for generic
attribute 0, or it emits a vertex just like glVertex().  I believe
it should do either, depending on context (see below).

The piglit gl-2.0-vertex-const-attr test declares two vertex attributes:
  attribute vec2 vertex;
  attribute vec4 attr;
and the GLSL linker assigns "vertex" to location 0 and "attr" to location 1.
The test passes.

But if the declarations were reversed such that "attr" was location 0 and
"vertex" was location 1, the test would fail to draw properly.

The problem is the call to glVertexAttrib(index=0) to set attr's value
was interpreted as glVertex() and did not set generic attribute[0]'s value.
Interesting, calling glVertex() outside glBegin/End (which is effectively
what the piglit test does) does not generate a GL error.

I believe the behavior of glVertexAttrib(index=0) should depend on
whether it's called inside or outside of glBegin/glEnd().  If inside
glBegin/End(), it should act like glVertex().  Else, it should behave
like glVertexAttrib(index > 0).  This seems to be what NVIDIA does.

This patch makes two changes:

1. Check if we're inside glBegin/End for glVertexAttrib()
2. Fix the vertex array binding for recalculate_input_bindings().  As it was,
   we were using &vbo->currval[VBO_ATTRIB_POS], but that's interpreted
   as a zero-stride attribute and doesn't make sense for array drawing.

No Piglit regressions.  Fixes updated gl-2.0-vertex-const-attr test and
passes new gl-2.0-vertex-attrib-0 test.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101941
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

gallivm: remove unused variable

Trivial.

st/mesa: add const qualifiers in st_extensions.c

Trivial.

st/mesa: whitespace/indentation fixes in st_init_extensions()

pipe-loader: use MAYBE_UNUSED to silence warning

Trivial.

nv50/ir: properly set sType for TXF ops to U32

All of the coordinates and LOD args are integers for TXF. This mostly
doesn't matter, except for converting into a levelZero=true operation by
removing an explicit zero LOD. For the comparison against zero to work
properly, the sType of the instruction has to be set correctly.

Fixes: KHR-GL45.robust_buffer_access_behavior.texel_fetch
Reported-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

mesa: remove duplicate assignments in bind_xfb_buffers()

Useless to do that before checking errors. It's now similar to
the other bind_XXX_buffers() helpers.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: fix debug/error messages in glColorMaski()

Trivial. While we are at it, adjust indentation.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: stop adding pointers from bindless structs to the cache

This is so we always create reproducible cache entries. Consistency
is required for verification of any third party distributed shaders.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: stop adding pointers from shader_info to the cache

This is so we always create reproducible cache entries. Consistency
is required for verification of any third party distributed shaders.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

compiler: move pointers to the start of shader_info

This will allow us to easily skip them when writting the struct
to disk cache.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: always write a name/label string to the cache

In the following patch we will stop writing the pointer to cache.

Unfortunately adding empty strings to that cache seems to be the
only thing we can do here once we no longer have the pointers.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: don't write uniform storage offset if there isn't one

This is so we always create reproducible cache entries. Consistency
is required for verification of any third party distributed shaders.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: add has_uniform_storage() helper to shader cache

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: stop adding pointers from glsl_struct_field to the cache

This is so we always create reproducible cache entries. Consistency
is required for verification of any third party distributed shaders.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: stop adding pointers from gl_shader_variable to the cache

This is so we always create reproducible cache entries. Consistency
is required for verification of any third party distributed shaders.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

glsl: allow NULL to be passed to encode_type_to_blob()

This will be used by the following commit.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv/gfx9: don't expose linear depth on vega.

This just zeros out the linear flags for gfx9 + depth formats.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: don't degrade tiling mode for small compressed or depth texture.

This is what radeonsi does, so we should do the same, also vega
doesn't support linear depth textures anyways.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: only minify image view width/height/depth before gfx9.

For gfx9 the addressing for images has changed, so we need to
provide the hw with the level0, however we still need to scale
for format block differences (so our compressed upload paths still
work).

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/image: don't rescale width/height if the format isn't changing

If the image view has the same format, we don't need to rescale
the w/h.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: cleanup some image view descriptor setup.

Avoid passing the vulkan image creation into the image view descriptor
setup. This cleans up the usage of range inside the init, instead
using the properly inited values in the image view.

This is just a cleanup but some future vega changes will depend on it.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: emit sx_mrt_blend registers

GFX9 needs the SX MRT blend registers programmed, port over
the code from radeonsi to workout the values from the blend
state, and program the registers on rbplus systems.

This fixes lots of:
dEQP-VK.pipeline.blend.*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: bump space check for indexed draw.

For the GFX9 packet we need one more dword.

Fixes an assert in:
dEQP-VK.draw.shader_draw_parameters.base_vertex.draw_indexed

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: fixup db/stencil disable.

This fixes disabled Z/stencil.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: fix level count in color register setup.

There was an off by one here.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/gfx9: use total levels in texture descriptor

We need to use all the levels when filling out the gfx9
descriptor.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Implement bc optimize.

Seems like we actually enabled it already, but did not implement
the shader part. With this patch we do.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/nir: refactor input variable iteration.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

i965: Stop using wm_prog_data->binding_table.render_target_start.

Render target surfaces always start at binding table index 0.
This is required for us to use headerless FB writes, which we
really want to do.  So, we'll never change that.

Given that, it's not necessary to look up a wm_prog_data field
which we already know contains 0.  We can drop the dependency in
brw_renderbuffer_surfaces (Gen4-5)...which was already confusingly
missing from gen6_renderbuffer_surfaces.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Add a brw_wm_prog_data::has_render_target_reads field.

State upload code should use prog_data rather than poking at shader_info
directly.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Inline brw_update_renderbuffer_surfaces().

Less baklava layers.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Pass fb into emit_null_surface instead of dimensions.

We either want the framebuffer dimensions or 1x1x1.  Passing fb and
falling back to 1x1x1 lets us shorten some calls.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965: Devirtualize update_renderbuffer_surface.

Replace piles of my own boilerplate with 1-2 lines of code.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>