nir: Add pass to combine adjacent scoped memory barriers

SPIR-V generates very granular barriers, however HW and backends might
not necessarily take advantage of those.  This pass provides a general
mechanism to combine such barriers.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3224>

nir: Reorder nir_scopes so wider scope has larger numeric value

Makes code comparing and combining scopes slightly more readable.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3224>

nir: Don't skip a bit in nir_memory_semantics

There was another enum entry in the draft versions of
nir_memory_semantics, but when it got dropped the entries were not
updated.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3224>

radv: use ac_gpu_info::use_late_alloc

Based on PAL and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>

radv: rewrite late alloc computation

Based on PAL and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>

radv: tune primitive binning for small chips

Based on PAL and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>

radv: use better tessellation tunables on GFX9+

Based on PAL and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>

radv/gfx10: cache metadata in L2 on small chips

Based on PAL and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4144>

intel/isl: Set DepthStencilResource based on aux usage

In ISL, usage flags only carry intent and not semantic meaning.  We
don't have a bulletproof way in ISL to specify that an image is of
depth/stencil type.  The usage flags are great but blorp, for instance,
loves to disrespect them.  One proposed solution to this problem is to
add explicit depth/stencil formats which are distinct from the
corresponding color formats.

Fortunately, however, empirical evidence suggests that this bit only
affects the sampler's interpretation of the CCS data.  Therefore, we can
set the bit based off of the aux_usage which is now very specific and
does carry semantic meaning.  In particular, aux_usage now makes a
distinction between color CCS and depth/stencil CCS which appears to be
exactly what the DepthStencilResource bit is for.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel: Require ISL_AUX_USAGE_STC_CCS for stencil CCS

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

iris: Use ISL_AUX_USAGE_STC_CCS for stencil CCS

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/blorp: Allow STC_CCS in blit sources

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/isl: Add a separate ISL_AUX_USAGE_STC_CCS

Stencil CCS is slightly different from color CCS.  Using a color CCS
resolve with stencil CCS doesn't do the right thing and you can't sample
from a stencil CCS image without the DepthStencilResource bit set or you
will get the wrong data.  Stencil CCS also has it's own rules such as it
doesn't support fast-clear and has no partial resolve.  This seems to
indicate that it should probably be its own isl_aux_usage.  Now that
adding new isl_aux_usage values is pretty cheap, let's split stencil CCS
out on its own.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/isl: Require ISL_AUX_USAGE_HIZ_CCS_WT for HZ+CCS WT mode

We also delete the badly named isl_surf_supports_hiz_ccs_wt.  The name
is misleading because it doesn't return whether or not the surface
supports HiZ+CCS in write-through mode (any single-sampled HiZ+CCS
capable surface does) but rather a heuristic decision about whether or
not we want to enable write-through mode based on the usage flags in the
isl_surf.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

iris: Use ISL_AUX_USAGE_HIZ_CCS_WT to indicate write-through HiZ

Previously, we always set the aux_usage to ISL_AUX_USAGE_HIZ_CCS and let
ISL choose write-through based on isl_surf_supports_hiz_ccs_wt.  This
commit makes us choose explicitly at surface creation time whether to
use HIZ_CCS or HIZ_CCS_WT based on the same set of conditions.  This is
more explicit and should be more robust as it lets us choose WT mode in
one place rather than trusting isl_surf_supports_hiz_ccs_wt to return
the same thing every time.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/blorp: Allow HIZ_CCS_WT in copy sources

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/isl: Add a separate ISL_AUX_USAGE_HIZ_CCS_WT

This is distinct from ISL_AUX_USAGE_HIZ_CCS in that the HiZ surface
operates in write-through mode which means that the HiZ surface is only
used for depth-testing acceleration and the CCS-compressed main surface
is always valid so we can texture from it.

Separating full HiZ from write-through mode at the isl_aux_usage level
has a couple of advantages:

 1. It's more explicit.  Instead of write-through mode depending on the
    heuristic decision in isl_surf_supports_hiz_ccs_wt, it's now
    something that's explicitly requested by the driver.  This should be
    more robust than hoping isl_surf_supports_hiz_ccs_wt always returns
    the same thing every time.  If someone (say BLORP) ever drops a
    usage flag on the isl_surf, there's a chance it could return a
    different value without us noticing leading to corruptions.

 2. Because ISL_AUX_USAGE_HIZ_CCS_WT is it's own isl_aux_usage flag, we
    can say inside the driver that HIZ_CCS does not support sampling but
    HIZ_CCS_WT does.  We can also pass HIZ_CCS_WT to isl_surf_fill_state
    and it can do some validation for us beyond what we would be able to
    do if we conflate HIZ_CCS_WT and CCS_E.

 3. In the future, we can add new heuristics to the driver which do
    things such as start all depth surfaces (regardless of usage flags)
    off in HIZ_CCS and then do a full resolve and drop to HIZ_CCS_WT the
    first time it gets used by the sampler.  This would potentially let
    us enable the faster HIZ_CCS mode even in cases where it technically
    comes in through the API as a texture.

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

intel/isl: Clean up some aux surface logic

The first check is redundant because the first thing we do in the "emit
the aux surface" section is assert that we actually have an aux_surf.
The second check involves an exclusion list of things which don't have
aux surfaces on Gen12 but an inclusion list is much simpler because it's
just "does it have MCS?".

Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4056>

ac: disable late alloc on small gfx10 chips

same as PAL.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>

ac: add radeon_info::use_late_alloc to control LATE_ALLOC globally

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>

radeonsi: tune primitive binning for small chips

same as PAL

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>

radeonsi: set better tessellation tunables on gfx9 and gfx10

same as PAL

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>

radeonsi/gfx10: cache metadata in L2 on small chips

same as PAL.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4143>

radv/sqtt: describe layout transitions with user markers

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4138>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4138>

radv/sqtt: describe begin/end subpass barriers with user markers

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4138>

nir/algebraic: coalesce fmod lowering

As fmod for 16/32/64 bits lowering does the same, let's merge all of
them in a single case.

Fixes dEQP-VK.glsl.builtin.precision_double.mod.compute.* on ACO.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4118>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4118>

nir/lower_double_ops: relax lower mod()

Currently when lowering mod() we add an extra instruction so if
mod(a,b) == b then 0 is returned instead of b, as mathematically
mod(a,b) is in the interval [0, b).

But Vulkan spec has relaxed this restriction, and allows the result to
be in the interval [0, b].

For the OpenGL case, while the spec does not allow this behaviour, due
the allowed precision errors we can end up having the same result, so
from a practical point of view, this behaviour is allowed (see
https://github.com/KhronosGroup/VK-GL-CTS/issues/51).

This commit takes this in account to remove the extra instruction
required to return 0 instead.

Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4118>

amd/llvm: Fix divergent descriptor indexing. (v3)

There are multiple LLVM passes that very much move the
intrinsic using the descriptor outside of the loop, defeating
the entire point of creating the loop.

Defeat the optimizer by  splitting the break into a separate
if-statement and putting an optimization barrier on the bool
in between.

v2: Move from a callback based system to begin/end loop.
    This does not make it significantly less intrusive but
    is a bit nicer with all the extra struct and callback
    stubs.
v3: Deal with non-divergent values in divergent path.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2160
Fixes: 028ce527395 "radv: Add non-uniform indexing lowering."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4109>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4109>

intel/fs: Fix NULL destinations on 3-source instructions again after late DCE

We considered moving this down near the call to
insert_gen4_send_dependency_workarounds.  By that point it's too late
for a couple reasons.  One, we're potentially increasing resiter
pressure that may lead to anoter spill.  Two, fixup_3src_null_dest tries
to allocate a VGRF, but the post-register allocation shader uses
physical registers.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2621
Fixes: ba2fa1ceaf4 ("intel/fs: Do cmod prop again after scheduling")
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4155>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4155>

radv: Enable subgroup shuffle on GFX10 when ACO is used.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4159>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4159>

radv: Enable lowering dynamic quad broadcasts.

This will lower dynamic quad broadcasts into something that both
LLVM and ACO can understand. On hardware which supports shuffles,
they are lowered to shuffle, on older hardware (GFX6-7) they will
get lowered to constant quad broadcasts.

Fixes dEQP-VK.subgroups.quad.*.subgroupquadbroadcast_nonconst_*

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4147>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4147>

nir: Add ability to lower non-const quad broadcasts to const ones.

Some hardware doesn't support subgroup shuffle, and on such hardware
it makes no sense to lower quad broadcasts to shuffle. Instead, let's
lower them to four const quad broadcasts, paired with bcsel instructions.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4147>

gen_release_notes: resolve ambiguity by renaming `version` to `previous_version` and `next_version` to `this_version`

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4113>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4113>

gen_release_notes: fix version in "you should wait" message

Fixes: 86079447da1e00d49db0 ("scripts: Add a gen_release_notes.py script")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4113>

pan/bi: Interpret register allocation results

Once LCRA has run, we have a map from IR indices to byte offsets into
the register file, so we need to "install" these results, rewriting the
IR to use native registers and fixing up writemasks/swizzles to
substitute vectorization for adjacent registers (for LCRA, we're
modeling in terms of real vectors).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

pan/bi: Add register allocator

We model the machine as vector (with restrictions) to natively handle
mixed types and I/O and other goodies. We use LCRA for the heavylifting.
This commit adds only the modeling to feed into LCRA and spit LCRA
solutions back; next commit will integrate it with the IR.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

pan/bi: Fix missing src_types

We want types to be consistent throughout the IR so we don't have to
make exceptions to parse things out. These cases just got missed.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

pan/bi: Fix vector handling of readmasks

The issue was messing with liveness analysis... with Midgard we look at
the writemask to decide how the instruction behaves. Here, since our ALU
is scalar (except for subdivision which doesn't have proper writemasks
anyway) we just look at the component count directly -- either 4 for
vector instructions (essentially - for smaller loads we can replicate
manually without much burden), or 1 for scalar.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

pan/bi: Minor fixes in iteration macros

Found during RA bringup.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

pan/midgard: Remove incorrect comment in RA

Ironically, this comment was mistakenly added by the commit that fixed
the purported issue in the comment (1bce7fdecd86 - found by `git blame`)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

panfrost: Move lcra to panfrost/util

We'll want to use it for the Bifrost RA as well.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4158>

glsl/list: use uintptr_t for exec_node_data()'s subtraction

This fixes UBSan warnings when foreach_list_typed_safe() passes NULL:
pointer index expression with base 0x000000000000 overflowed to 0xffffffffffffffa8

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4157>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4157>

aco: fix uninitialized data error in waitcnt pass

Shouldn't create any incorrect waitcnts but may create suboptimial
waitcnts in rare cases.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4133>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4133>

ac/llvm: add missing optimization barrier for 64-bit readlanes

Otherwise, LLVM optimizes it but it's actually incorrect.

Fixes: 0f45d4dc2b1 ("ac: add ac_build_readlane without optimization barrier")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3585>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3585>

iris: toggle on PIPE_CAP_MIXED_COLOR_DEPTH_BITS

This enables additional EGL configs where we have depth/stencil buffer
with different number of bits per pixel than color buffer has. This
enables some Android games to work that require such config.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4127>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4127>

turnip: Add tu6_control struct.

Follow the way that freedreno is doing so that we could see the whole
layout of the scratch buffer.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Enable VK_EXT_transform_feedback

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Implement an empty function vkCmdDrawIndirectByteCountEXT

TODO. We should implement this since indirect draw is enabled.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Implement stream-out emit and vkApis for transform feedback

1. Implement vkCmdBindTransformFeedbackBuffersEXT,
vkCmdBeginTransformFeedbackEXT and vkCmdEndTransformFeedbackEXT.
 - Not handling counter buffers yet.
2. Implement streamout emit function, mostly taken from fd6_emit.c

v2. Replace emit_pkt4 funcs with emit_regs.

v3. Don't copy the state of stream-output from tu_pipeline.

v4. Set zero to VPC_SO_CNTL/VPC_SO_BUF_CNTL in tu6_init_hw.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Setup stream-output when linking program

Mostly taken from fd6_program.c.

v2. Note that it forces to use full VS instead of binning pass VS if
there's stream output as the binning pass VS will have outputs on
other than position/psize stripped out, which is the same as freedreno.

v3. fix indentation.

v4. Use register index instead of location when setup streamout.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Define structs for transform feedback

Define new structures for streamout buffers and state.
Most members of the state struct are taken from freedreno driver.

v2. Use IR3_MAX_SO_* and avoid using magic values.

v3. Remove the state of stream-output in tu_cmd_state and use one in
tu_pipeline and split out reset and enabled fields.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

turnip: Gather information for transform feedback

- Add one member to the existed ir3_stream_output so that we could
assign location information from nir_xfb_info, rather than defining
new struct.

- Redefine maximum of so buffers, streams and outputs, which will be
used for turnip.

- Also enable caps for transform feedback for spirv_to_nir.

v2. Remove redefined maximums and use IR3_MAX_SO_* and add
IR3_MAX_SO_STREAMS.

v3. Remove the newly added location field so that we could keep aligned
with 32 bytes. Instead we create an array mapping between the location
and consecutive index, which is GL driver is doing.

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3942>

egl/android: set window usage flags

When creating an egl surface from an ANativeWindow, the window's usage
flags need to be set so that buffers are allocated properly.

Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lepton Wu <lepton@chromium.org>

ci: Make a simple little bare-metal fastboot mode for db410c.

This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.

I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL.  However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners.  We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.

Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>

ci: Fix installation of firmware for db410c's nic.

The debian firmware package doesn't actually contain it, costing us a
minute of boot time waiting for it to show up.

Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>

ci: Print the renderer/version that our dEQP invocation is using.

This is useful for sanity checking how the driver loads.

Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>

intel/compiler: fix cmod propagation optimisations

Knowing following:
 - CMP writes to flag register the result of
   applying cmod to the `src0 - src1`.
   After that it stores the same value to dst.
   Other instructions first store their result to
   dst, and then store cmod(dst) to the flag
   register.
 - inst is either CMP or MOV
 - inst->dst is null
 - inst->src[0] overlaps with scan_inst->dst
 - inst->src[1] is zero
 - scan_inst wrote to a flag register

There can be three possible paths:

 - scan_inst is CMP:

   Considering that src0 is either 0x0 (false),
   or 0xffffffff (true), and src1 is 0x0:

   - If inst's cmod is NZ, we can always remove
     scan_inst: NZ is invariant for false and true. This
     holds even if src0 is NaN: .nz is the only cmod,
     that returns true for NaN.

   - .g is invariant if src0 has a UD type

   - .l is invariant if src0 has a D type

 - scan_inst and inst have the same cmod:

   If scan_inst is anything than CMP, it already
   wrote the appropriate value to the flag register.

 - else:

   We can change cmod of scan_inst to that of inst,
   and remove inst. It is valid as long as we make
   sure that no instruction uses the flag register
   between scan_inst and inst.

Nine new cmod_propagation unit tests:
 - cmp_cmpnz
 - cmp_cmpg
 - plnnz_cmpnz
 - plnnz_cmpz (*)
 - plnnz_sel_cmpz
 - cmp_cmpg_D
 - cmp_cmpg_UD (*)
 - cmp_cmpl_D (*)
 - cmp_cmpl_UD

(*) this would fail without changes to brw_fs_cmod_propagation.

This fixes optimisation that used to be illegal (see issue #2154)

= Before =
 0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
 1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
 0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F

Now it is optimised as such (note change of cmod in line 0):

= Before =
 0: linterp.z.f0.0(8) vgrf0:F, g2:F, attr0<0>:F
 1: cmp.nz.f0.0(8) null:F, vgrf0:F, 0f
= After =
 0: linterp.nz.f0.0(8) vgrf0:F, g2:F, attr0<0>:F

No shaderdb changes

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2154
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3348>

pan/bi: Fix swizzle for second argument to ST_VARY

Off-by-one.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Implement nir_op_ffma

We have native FMA which works for graphics usage (unlike Midgard where
it's really reserved for compute for various reasons), let's use it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Add dead code elimination pass

Now that we have liveness analysis, we can cleanup the IR considerably.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Add liveness analysis pass

Now that all the guts are shared with Midgard, it's just a matter of
wiring it in.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Add bi_max_temp helper

Instead of trying to reindex all the times, just be okay with consistent
but sparse indices, then figuring out the max index is easy enough.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Add bi_next/prev_op helpers

From Midgard. These are surprisingly helpful.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Add bi_bytemask_of_read_components helpers

Same purpose as the Midgard version, but the implementation is
*dramatically* simpler thanks to our more regular IR.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Paste over bi_has_arg

While we're at it, cleanup the Midgard one.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

panfrost: Sync Midgard/Bifrost control flow

We can move e v e n more code to be shared and let bi_block inherit from
pan_block, which will allow us to use the shared data flow analysis.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

panfrost: Move liveness analysis to root panfrost/

This way we can share the code with Bifrost.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Subclass midgard_block from pan_block

Promote as much as we feasibly can while keeping it Midgard/Bifrost
agnostic.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Sync midgard_block field names with Bifrost

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Decontextualize liveness analysis core

We mostly just need the temp_count from it.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Localize `visited` tracking

Instead of a property on the block, just track it within the function to
minimize IR dependencies.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Implement sysvals

Now that it's all abstracted nicely with an implementation shared with
Midgard, this is pretty easy to get.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/bi: Switch to panfrost_program

...now that it's shared.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

panfrost: Move Midgard sysval code to common Panfrost

We'll use this all as-is in Bifrost.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Remove dest_override sysval argument

Unused, noticed while working on porting over to Bifrost.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Decontextualize midgard_nir_assign_sysval_body

Now all sysval code should be fairly generic.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Remove indexing dependency of sysvals

Ideally we would sync the compilers to use the same indexing scheme but
that's a lot more Midgard refactoring than I have time for right now.
This is good enough honestly.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Adjust sysval-related prototypes

We'd like to share this big chunk of code with Bifrost but that requires
removing the compiler_context parameter... which is totally unused in
fact!

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

pan/midgard: Remove unused iterators

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

panfrost: Promote midgard_program to panfrost/util

We'll want Bifrost to reuse the same linking mechanisms for the most
part.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4150>

gitlab-ci: build RADV in meson-i386 to avoid 32-bit build failures

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>

radv: fix 32-bits build (again)

Fixes: dcfc08f5b8a ("radv/sqtt: describe begin/end command buffers with user markers")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4044>

mesa: don't unroll glMultiDrawElements with user indices for gallium

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>

gallium: add PIPE_CAP_DRAW_INFO_START_WITH_USER_INDICES

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>

vbo: fix vbo_copy_vertices for GL_PATCHES and adjacency primitive types

Fixes: 4c6323c49f1 - vbo: handle GS and tess primitive types when splitting Begin/End
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>

vbo: fix transitions from glVertexN to glVertexM where M < N

Fixes: 1f6e53e2 "vbo: don't store glVertex values temporarily into exec"
Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>

vbo: use vbo_exec_wrap_upgrade_vertex for glVertex in ATTR_UNION

We can't decrease the size for glVertex before a flush,
so use vbo_exec_wrap_upgrade_vertex directly.

Reviewed-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3591>

st/mesa: keep serialized NIR instead of nir_shader in st_program

This decreases memory usage, because serialized NIR is more compact.

The first variant is created from nir_shader for uncached shaders.
All other variants are created from serialized NIR.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2909>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2909>

gitlab-ci: Don't restrict ppc64el/s390x build jobs to gstreamer runners

The packet runners have beefier CPUs now and don't seem to run into
test timeouts anymore.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4128>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4128>

gitlab-ci: Sort packages to install alphabetically

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

gitlab-ci: Remove unneeded python3-pilkit dependency

It was added with tracie, but it doesn't depend on it.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

gitlab-ci: Fix indentation and dangerous "\" in the last multiline line

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

vc4: Fix query_dmabuf_modifiers mis-reporting external_only property

vc4_screen_query_dmabuf_modifiers doesn't consider that the given format
may only be supported by lowering, which only happens for external
textures.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4063>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4063>

aco: Don't store TCS outputs to LDS when we're sure that none are read.

This allows us not to write an output to LDS, even if it has
an indirect offset.

No pipeline DB changes.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

aco: Only write TCS outputs to LDS when they are read by the TCS.

Note that tess factors are always read at the end of the shader,
so those are still always saved to LDS.

Totals from affected shaders:
VGPRS: 25244 -> 25164 (-0.32 %)
Code Size: 1768268 -> 1690804 (-4.38 %) bytes
Max Waves: 4947 -> 4953 (0.12 %)

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

aco: Store tess factors in VMEM only at the end of the shader.

This optimizes out several superfluous stores of the tess factors,
especially if the shader wrote those outputs multiple times.

Pipeline DB changes on GFX10:
Totals from affected shaders:
SGPRS: 30384 -> 29536 (-2.79 %)
Code Size: 2260720 -> 2214484 (-2.05 %) bytes

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

aco: Don't generate an if when the first part of a merged HS or GS is empty.

In some cases (eg. in a few tessellation CTS tests) the VS part of
a merged HS is completely empty. Let's not generate a divergent if
in these cases. (LLVM also doesn't do it.)

No pipeline DB changes, only affects the CTS.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

radv: Enable ACO on all stages.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

aco: Enable running TES as ES, including merged TES+GS.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>

radv: Enable ACO for TES when there is no GS.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3964>