dev,cpu: Make two very generic enums ScopedEnums.

Two python Enum parameter types had some very generic elements which
both include one named "none". When headers for both are included that
creates a conflict which breaks the build. Enums which such extremely
generic names need to be scoped so that they don't invite these sorts
of collisions.

This change converts them from Enum to ScopedEnum in python, and also
makes a few small changes to where they're used in c++ to match.

Issue-on: https://gem5.atlassian.net/browse/GEM5-447

Change-Id: Ibda6e6cfcd700a618f8c68d174f33ec1e178b9ac
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27950
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Rename the ruby Prefetcher class RubyPrefetcher.

A new Prefetcher namespace was added which holds the gem5 prefetchers
and means they don't all need a "Prefetcher" in their name. Unfortunately
that means that there is now both a Prefetcher namespace and a
Prefetcher class which conflict with each other.

This change tries to resolve the conflict with as little disruption as
possible by simply renaming the c++ ruby Pretcher class RubyPrefetcher,
leaving the python name alone so that configs aren't affected.

Issue-on: https://gem5.atlassian.net/browse/GEM5-447

Change-Id: I7afdf5dbc57dbf46d82552113c52f3a9207870f2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27949
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Use six.input instead of raw_input.

raw_input is not defined in python 3.x and has been replaced by "input".
The "six" compatiblity module defines its own "input" method which
figures out which to use under the covers.

Change-Id: I13a885dd45ec0160c7b46e334b06aae239e3c836
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27948
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Import "sys" which is used in an exception handler.

If the call to "raw_input" fails (it does in python 3.x), then the
"except" runs and will also fail because sys hasn't been imported.

Change-Id: Ibf5778a893a5bd8aad17f4aee544ddcfe5085cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27947
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

fastmodel: Enable semihosting, including pseudo insts.

It is assumed that the semihosting configuration uses the semihosting
number which includes gem5's pseudo insts.

Given the complexity and likely limitted value of letting the user
arbitrarily configure fast model's semihosting, and the fact that that
semihosting implementation would compete with gem5's own, those
parameters should be removed from python and set purely within C++.

Also note that if this semihosting support is used, the System object
needs to have an ArmSemihosting object installed to handle the calls.

Change-Id: I8e1de7717c9784dc7873795acd0a06389ec527b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25623
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-sparc: MAP_32BIT does not exist on solaris

Judging by the mmap documentation for solaris:

https://docs.oracle.com/cd/E88353_01/html/E37841/mmap-2.html

MAP_32BIT is not defined. Instead it is using a MAP_LOW32 field
which is explicitly described as different from the MAP_32BIT
field in Linux distributions.

The patch is removing the mapping since:

* As mentioned solaris doesn't implement MAP_32BIT (Target)
* Not every host supports MAP_32BIT.
    ** http://man7.org/linux/man-pages/man2/mmap.2.html

In fact, assuming a Linux host, MAP_32BIT is defined for
x86-64 only, which means it is not possible to compile
gem5-SPARC on a (e.g.) Arm host.

Change-Id: Ibf234754941ae915e728db5fbc4ba1db3aaa1c81
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27647
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Use off_t for mmap offset arguments

The GuestABI used to call the system-calls infers the size of values
read from the registers based on the function signature of the system
call. For mmap this was causing offset to be truncated to a 32-bit
value. In the GPUComputeDriver mmap, the offset must be a 64-bit
value. This fixes a bug where the doorbell memory was not setup and
causing GPU applications to fail.

Change-Id: I75d9b32c0470d1907c68826ef81cf6cd46f60ea7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27367
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

mem-cache: Create Prefetcher namespace

Create a namespace for the Prefetcher classes.

As a side effect the Prefetcher suffix has been removed from the
C++'s classes names, and the memory leaking destructor overrides
have been fixed.

Change-Id: I9bae492d2fd4734bcdfb68c164345898e65102b2
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24537
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: add missing path redirection to mmap createObjectFile

The redirection call was mistakenly removed at:
Ide158e69cdff19bc81157e3e9826bcabc2a51140 and that breaks running
cross compiled dynamically linked executables in SE.

JIRA: https://gem5.atlassian.net/browse/GEM5-430

Change-Id: I33419c78fbf183cda0bba98f7035a2b25ebc6fa3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27887
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

configs: make --disk-images optional in fs.py

The main applications are to run baremetal programs and initramfs Linux
kernel.

Before this patch, disks() calls in makeArmSystem would throw:

IOError: Can't find file 'linux-aarch32-ael.img' on M5_PATH.

In order to achieve this, this commit also removes the default hardcoded
disk image basenames.

For example, before this commit, running without a --disk-image in X86
would automatically search for an image with basename x86root.img in
M5_PATH, which means we would either have to ignore any disk image error,
or else running without disk images would fail.

After this commit, you would have to pass --disk-image x86root.img to
achieve the old behaviour.

Change-Id: I0ae8c4b3b93d0074fd4fca0d5ed52181c50b6c04
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27867
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

sparc,configs: Initialize ROMs directly, not with the workload.

This simplifies the SPARC FS workload significantly, and removes
assumptions about what ROMs exist, where they go, etc. It removes
other components from the loop which don't have anything to contribute
as far as setting up the ROMs.

One side effect of this is that there isn't specialized support for
adding PC based events which would fire in the ROMs, but that was never
done and the files that were being used were flat binary blobs with no
symbols in the first place.

This also necessitates building a unified image which goes into the single
8MB ROM that is located at address 0xfff0000000. That is simply done
with the following commands:

dd if=/dev/zero of=t1000_rom.bin bs=1024 count=8192
dd if=reset_new.bin of=t1000_rom.bin
dd if=q_new.bin of=t1000_rom.bin bs=1024 seek=64
dd if=openboot_new.bin of=t1000_rom.bin bs=1024 seek=512

This results in an 8MB blob which can be loaded verbatim into the ROM.
Alternatively, and with some extra effort, an ELF file could be
constructed which had each of these components as segments, offset to the
right location in the ELF header. That would be slightly more work to set up,
but wouldn't waste space on regions of the image that are all zeroes.

Change-Id: Id4e08f4e047e7bd36a416c197a36be841eba4a15
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27268
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>

mem: Support initializing a memory with an image file.

This is particularly useful for ROMs. It avoids forcing other components
of the simulation (the System object, the Workload object) from having
to know what ROMs exist, where they are, and what goes on them, and
leaves that to the config script.

Change-Id: Ibbcffffcb82e0d289f0b3942728c30b8f69d28ba
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27267
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Add config files for crosstool-ng toolchains.

There is one for each arch gem5 supports, except RISCV which is not
supported by crosstool-ng at the moment. All configs are for Linux, also
because that's what crosstool-ng tends to support.

Change-Id: I898a9e8c7b144c3d690c232fd4fb20ede5430def
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27758
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch-x86: Change insertBits in TLB translateFunctional

x86 TLB::translateFunctional inserts one too many bits from the virtual
address leading to an incorrect physical address occasionally.

Change-Id: I2cc551c496f7ce729ea440ef01a680c0de257269
JIRA: https://gem5.atlassian.net/browse/GEM5-442
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27827
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util,scons: Generalize the aarch64 scons for the m5 util.

Slightly parameterize it so it can be used with the other versions of
the utility.

All build products for a given variant will now go under
build/${VARIANT}. The primary build outputs will go under
build/${VARIANT}/out so that they're easy to distinguish.

Change-Id: Idd244cc2a6c08ec8e4d67de3d0bae604c0611220
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27217
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

tests: Run realview(64) tests with VExpress_GEM5_Foundation

This patch is updating the arm regression configs so that the newer
VExpress_GEM5_Foundation platform is used instead VExpress_GEM5_V1
for running regressions.
The platform has the same memory map as V1, except for a different
position of PCI regions in the memory map and more importantly
the use of GICv3 instead of GICv2

Change-Id: I48ff56dce38d482be7f1acf162f17725286f54fe
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27714
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>

arch-arm: Override ISA::takeOverFrom for the Arm ISA

This is fixing switcheroo tests when using a PMU/GICv3.  When you switch
cpus you usually instantiate multiple cpus at the beginning and you
switch them at runtime with the m5.switchCpus function.

Every cpu will have its own set of ThreadContexts/ISAs.
When you switch cpu/tc/isa, you need to update the tc/isa pointer
cached in the device model otherwise those will still reference
the switched out cpu.

Change-Id: I3aeee890286851189c3a8a4d378c83f32e973361
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27713
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch, cpu: Add a takeOverFrom method for switching ISAs

This will be used by architectures to handle the m5.switchCpus at the
ISA level since some ISA specific fields might need to be aware of the
TC change.

Change-Id: If8d50c5c80bc3458d5f1d14cf93ae107314c98cf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27712
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Remove unnecessary haveGICv3CPUInterface

This is not needed since the ISA class could just check if
the gicv3CpuInterface ptr is different than nullptr

Change-Id: I6d562a5d9ff2568774b6958f03f04d878266ca8f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27711
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: In build_cross_gcc, set LIMITS_H_TEST=true.

This forces a test in the gcc Makefile to pick the right answer, where
its own check will not. Without this fix, installing libsanitizer fails
to build while installing the c++ headers because it can't find a
definition for PATH_MAX. Disabling building libsanitizer seems to work
around the problem, but other problems crop up later when using the
cross compiler, specifically when trying to build the googletest
library.

The chrome authors apparently ran into a similar problem when building
the native client tool chain as described in this bug:

https://bugs.chromium.org/p/nativeclient/issues/detail?id=3190

The CL which fixed the issue is here:

https://codereview.chromium.org/11462002/patch/1/2.

With a similar fix applied to build_cross_gcc.py, the cross compilers
build without issue, and are then able to build the googletest library
without issue.

Change-Id: Ia6869d3dc523cb0d964e82bb300f8b092693739b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27489
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

tests: Fail checkpoint regressions if no cpt has been taken

This is to avoid the scenario where a wrong interval is chosen
and no checkpoint is taken.

Change-Id: I524d797048ab04799555aaf7a051241b2917ad95
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27710
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>

tests: Reduce checkpoint interval used by realview regressions

With the current interval, the realview(64)-simple-atomic-checkpoint
regressions are not actually checkpointing since they finish boot
(and hit m5 exit) before creating the first checkpoint.

Change-Id: I297864ccb7ec8a818c9eccd94406b69d89d1f8d3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27709
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix checkpointing for the GenericTimer

The revamp of the GenericTimer was not taking into account:

* The name of the variable will be printed on the checkpoint to label the
data. It is not possible to use different variable names when
serializing/unserializing, and it is not possible to use the same
temporary variable to serialize/unserialize different values.

* the serializeSection is creating a new sub section in the
checkpoint. Doing the following:

void
GenericTimerFrame::serialize(CheckpointOut &cp) const
{
    physTimer.serializeSection(cp, "phys_timer");
    virtTimer.serializeSection(cp, "virt_timer");
    SERIALIZE_SCALAR(accessBits);
}

will serialize the accessBits under the virt_timer subsection
rather than the parent generic_timer_frame.

JIRA: https://gem5.atlassian.net/projects/GEM5/issues/GEM5-426

Change-Id: I7676309965a33156789d2ef13e966c7a4ad88a71
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27708
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Handle empty object_file scenario in ArmFsWorkload

At the moment it is actually possible to pass en empty object file
to the ArmFsWorkload (OsKernel) class. We need to handle this
situation as well.
In case no bootloader nor object file is passed, we default to
AArch64 (default value for ArmFsWorkload)

Change-Id: I3b4aa8b8d61a8fac08da218125984b3bb1d38fb9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27707
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>

util: Move m5op_arm_A64.S into an aarch64 subdirectory.

Also rename it to m5op.S. These files will be distinguished by what
directory they're in, rather than by their name.

Change-Id: I3a89d529bb5b760579df22234cf9bf870711b56e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27216
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Delete the aarch64 Makefile for the m5 utility.

Change-Id: I202f2b0986ef12ddb076045673d80405b1afb54a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27215
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util,scons: Detect java and lua51 in the m5 utility scons files.

These will enable or disable the java and lua51 m5 op wrappers depending
on whether the required tools are available on the host system.

Change-Id: I2b11a13a39b2dfd5d45a9ed57702d2e225ef7d2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27214
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>

util: Add SCons build files for the aarch64 verson of the m5 utility.

These are currently specific to aarch64, but will be expanded to cover
all other versions of the utility as well.

The intention of these new files is to centralize the build mechanism
for the different versions of the utility so that they have consistent
features, mechanisms, and targets, and so that new features will
automatically be shared by all versions without having to be implemented
in each.

This also sets up a separate build directory which will keep the source
tree clean, and will (with some more development) make it possible to
build multiple versions of the m5 utility at the same time without them
running into each other.

Change-Id: I10018eef6beb4af30a8d3bbab8b82cabd2b3f22c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27213
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86: Do not fixup faults in TLB

Faults in the TLB ought to cause a page walk. Force that by removing
the fixup in X86 TLB.

This fixes rare race conditions where a timing page walk is
intercepted by a TLB miss which fixes up the fault resulting in
double calls to allocateMem in Process class.

Change-Id: Iaef4d636cd2997144d8bc5012cd7c2a0a97102e5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27507
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

mem: Modify DRAM controller for flexibility and new memories

This change includes:
1) Verify available command bandwidth
2) Add support for multi-cycle commands
3) Add new timing parameters
4) Add ability to interleave bursts
5) Add LPDDR5 configurations

The DRAM controller historically does not verify contention on the
command bus and if there is adaquate command bandwidth to issue a
new command. As memory technologies evolve, multiple cycles are becoming
a requirement for some commands.  Depending on the burst length, this
can stress the command bandwidth. A check was added to verify command
issue does not exceed a maximum value within a defined window. The
default window is a burst, with the maximum value defined based on the
burst length and media clocking characteristics. When the command bandwidth
is exceeded, commands will be shifted to subsequent burst windows.

Added support for multi-cycle commands, specifically Activate, which
requires a larger address width as capacities grow.  Additionally,
added support for multi-cycle Read / Write bursts for low power
DRAM cases in which additional CLK synchronization may be required
to run at higher speeds.

To support emerging memories, added the following new timing parameters.
1) tPPD -- Precharge-to-Precharge delay
2) tAAD -- Max delay between Activate-1 and Activate-2 commands

I/O data rates are continuing to increase for DRAM but the core frequency
is still fairly stagnant for many technologies. As we increase the burst
length, either the core prefetch needs to increase (for a seamless burst)
or the burst will be transferred with gaps on the data bus. To support
the latter case, added the ability to interleave 2 bursts across bank
groups.

Using the changes above, added an initial set of LPDDR5 configurations.

Change-Id: I1b14fed221350e6e403f7cbf089fe6c7f033c181
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26236
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add VExpress_GEM5_Foundation platform

A new VExpress_GEM5_Foundation platform has been added in order to match
the FVP Armv8-A Foundation Platform described in:

Armv8-A Foundation Platform - User Guide - Version 11.8

The VExpress_GEM5_V1/V2 are already loosely based on the Foundation
platform, however there are some differences in the PCI regions (V1/V2)
and the GICv3 regions (V2).
We hence introduce the VExpress_GEM5_Foundation to match closely the
FVP Foundation Platform

Change-Id: I1604c64ce566308d888c3a630019494b9fae7acf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27388
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>

configs: add option for memory channel intlv.

Current memory channel interleave is hard-coded to be maximum between 128
and system's cache line size. Making this value configurable enables use
cases with DMA masters accessing at higher than 128 block granularity.

Change-Id: I8123fa307efd3fd8f16c815ee74a84844bb51edb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27629
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

util: Implement PIC assembly for the aarch64.

When accessing m5_mem and building PIC code, we need to get the address
of m5_mem out of the global offset table, and then load the value from
there. If we try to load from m5_mem directly, the assembled code has a
relocation type the linker can't handle when building a shared object.

Change-Id: Ieb19c3d17c37ef810559ee24b68886b18ddcc869
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27212
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Replace SLICC queueMemory calls with enqueue

Calls to queueMemoryRead and queueMemoryWrite do not consider the size
of the queue between ruby directories and DRAMCtrl which causes infinite
buffering in the queued port between the two. This adds a MessageBuffer
in between which uses enqueues in SLICC and is therefore size checked
before any SLICC transaction pushing to the buffer can occur, removing
the infinite buffering between the two.

Change-Id: Iedb9070844e4f6c8532a9c914d126105ec98d0bc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27427
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>

arch-arm, dev-arm: Autogen PSCI node in DTB

This is controlled via the python only _have_psci parameter
This flag will be checked when auto-generarting a PSCI node. A client
(e.g Linux) would then be able to know if it can use the PSCI APIs

Change-Id: I16c4a67bd358eca3dfff6c98ab8a602a31e1c751
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27387
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: CNTHCTL trap to EL2 only if ARMv8.6-ECV implemented

In condGenericTimerCommonEL1SystemAccessTrapEL2 we were trapping
accesses to the EL1 virtual timer/counter registers to EL2, not
considering that this feature is part of ARMv8.6-ECV only
(not supported at the moment)

Change-Id: Ic03bcae436a105fb139a74126881b665ee08c912
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Adrian Herrera <adrian.herrera@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27408
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Fix undefined behavior in mask generation

When generating a mask, if the number of bits is greater than
the maximum shift distance (63), the shift will have undefined
behavior. Previously the branch was taking care of a single
trespassing case, and it has been fixed to cover the remaining.

Issue-on: https://gem5.atlassian.net/browse/GEM5-205

Change-Id: Ib5a00917c8d2b23ffdb710c2f9673d956cd9f43e
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27104
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

base,arch-hsail: Fix GPU build

The GPU build is currently broken due to recent changes. This fixes
the build after changes to local access, removal of getSyscallArg,
and creating of AMO header in base.

Change-Id: I43506f6fb0a92a61a50ecb9efa7ee279ecb21d98
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27136
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>

scons: Fix an exception in the DictImporter on scons shutdown.

The DictImporter's __del__ method calls unload, and that imports
sys.modules so that it can remove the modules that the DictImporter had
set up as the importer goes away.

Unfortunately, the importer only goes away when python is shutting down,
and at that time some aspects of the system, namely sys.meta_path, have
been cleaned up. When unload tries to import sys, that causes an
exception which scons/python reports but which doesn't do anything bad
otherwise.

In all of the examples of this older style of import object online, none
had a __del__ method, and none worried about cleaning up sys.modules
when they went away. In light of that, I've removed the __del__ method
entirely.

Another reason I think it's safe to remove __del__ is that the importer
was not actually being deleted even when it was removed from
sys.meta_path, and all the modules it had loaded where removed from
sys.modules. I think that was because the SimObject classes that it had
set up still had references (they are used later in the SConscript), and
those would, either directly or indirectly, refer back to the modules
and the importer. Those remaining references kept the importer alive,
preventing __del__ from being called before all those other objects were
cleaned up.

I think in python 2, the order things were cleaned up just so happened
to avoid trying to import sys when it was no longer possible, but in
python 3 that changed and resulted in this exception being thrown.

I've tried building gem5 with scons running under python 2 and python 3,
and with this change there is no error at shutdown. Both also produce a
gem5 binary which can run hello world without problems.

Change-Id: Ib1f5c7403df57fc420cec7ec0fef20a164a06991
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27247
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

arch-arm: Add missing include in QARMA implementation

Change-Id: Ic8a0146968d45ab1007687686eb73639a1c85513
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27407
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>

configs: Enabling SimObj CLI for baremetal platform

Change-Id: I0d4059976c8fb6a1d796998af302eaa764609f86
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27347
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Update jni_gem5Op.c so it will compile again.

The header for the m5op entry points had moved. Also the names of the
entry points had been normalized to have a consistent structure. Neither
of those changes were ported to this file, making it no longer compile.

Change-Id: I890c0486bd19fe2692cce92983290e854dc87afa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27211
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>

util: Update the m5 util Makefiles to not use javah.

In more recent versions of the JDK, the javah tool has been dropped. The
same job can be accomplished by passing a -h option to javac, telling it
where to put the header files javah would have generated.

Change-Id: Ibc543d5fa222848458f45b1945f8050b85b77ca2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27210
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>

util: Move source files into a src directory.

This also moves the Makefiles, which will still produce build output in
the src directory. This is to prepare for a scons based build system
which will create a separate build directory with build artifacts.

Change-Id: I7c6d325e1d0a428656b2e3070b5e942515543696
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27209
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

util,x86: Use M5OP_FOREACH to define the m5op entry points for x86.

Change-Id: Idbfa3341a5e0d2cf57ce7dbe8cf45834b3aa067a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27208
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

util,sparc: Use M5OP_FOREACH to define the m5op entry points for sparc.

Change-Id: I9b125c843425ef4a7a59061d5897dd8e83e06abb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27207
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

util: Undef M5OP at the end of assembly files that use M5OP_FOREACH.

This may not be necessary since M5OP is defined/used at the end of the
function, but it's best to clean up after ourselves.

Change-Id: I524d92cb8dc44c6004dfa8109f3b17f56dba763e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27206
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

util: Remove the subfunc arg from M5OP_FOREACH.

Now that the annotation pseudo ops are removed, the subfunction is
always zero. It is no longer decoded within gem5 either. The format of
the pseudo op func/subfunc mechanism is unchanged for compatibility, but
the subfunc field will always be zero now.

Change-Id: I2167571577b6557d06aa26d8aecaca78797f5f59
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27205
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

misc: Remove the now unused M5OP_FOREACH_ANNOTATION macro.

Change-Id: I33827c923cf02c94fea2df972919636961f3dd94
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27204
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

arch-arm, dev-arm: WakeRequest implementation

This patch provides a GIC WakeRequest implementation based on GICv3 and
FVPBasePwrCtrl models. When GICR_WAKER.ProcessorSleep is set to 1 for a
certain PE, any pending interrupt coming from the Redistributor asserts
a WakeRequest signal; if PwrStatus.WEN is set, this brings up the PE.

Change-Id: I5e8b7f0e9f7706dfcc7d2e0857f4c3b86cdc04ca
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26810
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

util: Remove the annotation pseudo ops symbols from the m5 utility.

These pseudo ops have been removed and will no longer work with gem5.

Change-Id: Ie07a320db528cb5c628f2c194fb1672b1fcae39a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27203
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>

configs: Add --wait-gdb as option to se.py

I switch between waiting and non-waiting scenario many times per day.
The BaseCPU.wait_for_remote_gdb attribute, introduced in c2baaab0ed,
makes it much less painful by saving many recompiles.
The present commit tries to go a bit further: the se.py script is
under version control, and changing it interferes with smooth git
workflow.

Change-Id: Ie65ffc44b11d78d5e7878f81f2fcdafa143c20a8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27287
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

mem: Get rid of the now unused SecurePortProxy class.

This proxy was only used by the ARM semihosting interface which can now
use a tweaked regular TranslatingPortProxy or SETranslatingPortProxy
instead of this special purpose class.

This sort of class would still be necessary if you wanted to use
physical addresses and not virtual addresses, but presently there is no
such use. This code can be retrieved from history if it's needed in the
future.

Change-Id: Ie47a8b4bb173cba1a06bd3ca60391081987936b8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26625
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arm: Make semihosting use virtual addresses.

This is in accordance with the spec. To successfully translate requests
which need their secure flag set, build a translating port proxy with
that flag enabled.

Change-Id: I6ceec12aed297c57831a368a74d8b4e41f86f4c9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26624
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Adjust idreg value in RealViewCtrl

This is to match the FVP Foundation platform.
Priviledged software could query the SYS_ID register in the V2m
Motherboard controller to extract platform information:

https://
static.docs.arm.com/100961/1110/armv8_a_fp_ug_100961_1110_00_en.pdf

In particular:

* SYS_ID[31:28] (REV) = Revision Number
** Value = 0x3 -> FVP Foundation v9.6

* SYS_ID[27:16] (HBI) = Board Number
** Value = 0x010 -> FVP Foundation platform

* SYS_ID[15:12] (BLD) = Which variant of the GIC memory is implemented
in the model
** Value = 0x1 -> (!= legacy VE memory map)

* SYS_ID[11:8] (Arch) = Architecture
** Value = 0x1 -> Architectural model (FVP)

Change-Id: Ib9395eb872cb925c029077acfdd18e48478f779b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27184
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix pci_mem_base setting in VExpress_GEM5_Base

This was not actually used and DTB was generated using an hardcoded
value.

Change-Id: Ie8fd63495df5cb56418593cf0dd5432dc2992eac
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27288
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

arch-arm: ARMv8.3 CompNum, SIMD complex number support

This patch implements the CompNum SIMD instruction for armv8.3.
This instructions are Fcadd, Fcmla(vector and element) and
Vcadd, Vcmla ( vector and element).

+ isa/decoder/thumb.isa: Decoding changes for SIMD instructions in T32
+ isa/formats/fp.isa: Decoding changes for SIMD instructions in A32
+ isa/formats/uncond.isa: Decoding changes for SIMD instructions in A32
+ isa/formats/aarch64.isa: Decoding changes for SIMD instructions in A64
+ isa/formats/neon64.isa: Decoding changes for SIMD instructions in A64
+ isa/insts/neon.isa: Vcadd, Vcmla instruction implementation
+ isa/insts/neon64.isa: Fcadd, Fcmla instruction implementation
+ isa/templates/neon.isa: Modify templates for adding byElement support

Change-Id: I7f11ce88137dad077d2cad698dcaa9a79a3f317b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27183
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

scons: Enable LTO and partial linking with gcc >= 8.1.

The bug(s) which prevented LTO and partial linking from working with gcc
have been fixed in my local version (9.3), and according to one of the
original bug reports:

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69866

A fix was committed in gcc version 8.1.

The original code left in the SConstruct describing the problem with
versions greated than 6.0 also enabled an -flinker-output option and set
it to "rel". That option doesn't show up in the gcc 8.4 documentation
even though it was added in 6.0, but in the 9.3 documentation it
describes it and says that it defaults to "rel" when the -r (partial
linking) option is used.

This *should* mean that LTO and partial linking can be used together
with no issues after version 8.1, and at most by version 9.3. If someone
finds that that isn't true, then the range of bad versions can be
expanded.

Change-Id: Ie0529d077a0042ef55e2af995d01430d1695c031
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27131
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Call summarize_warnings() when scons finishes building.

This will ensure that warnings are not all shoved off the end of the
scrollback buffer or lost in a sea of compiler lines, and that the user
will actually have a chance to see and read them.

Change-Id: I7129560482ebca903ec597f8b1cf8a9a84d98c9c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27130
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arm: Add a callSemihosting method that figures out the width.

Change-Id: Ic94987fffd04648932e5dd085ffeef8500e335cf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25951
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arm: Add a gem5 specific pseudo op semihosting call.

This is in the range of call numbers set aside for extensions. When
called, it will extract the function to use from the first argument
slot. Then it calls the pseudoInst dispatching function using an ABI
which drops the return value (which is handled by semihosting itself)
and which extracts arguments from the remaining slots in the param
structure.

This makes gem5 pseudo ops available on CPU models which support
semihosting but not instruction based or address based "magic"
operations, aka hypercalls. This includes the fast model CPUs.

Change-Id: Ic4817f2b1e6aad7784af77a1a494cf614d4d4c6c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25950
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

riscv: Fix RISCV builds by updating its use of pseudoInst().

The signature of the function and RISCV's use of it changed
simultaneously, were independently verified, and then separately merged.
The combination of the two does not build successfully.

This change updates RISCV so it uses the new signature.

Change-Id: I6a944e664640c9086583d546870ed1fbfa84a3e7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27163
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nils Asmussen <nils.asmussen@barkhauseninstitut.org>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Add a mechanism to accumulate warnings to reprint at the end.

When building gem5, it's possible for warnings printed early in the
build to be quickly wisked away in a see of compile lines, never to be
seen again (or driven off the end of the scrollback buffer).

To avoid those messages getting lost or ignored, this change adds a
mechanism to aggregate them into a list so that they can be summarized
at the end of the build, successful or not.

Change-Id: Ie13320717698fcbcd3a8f8d1c062467e8d6d2914
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27129
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>

scons: Use the textwrap module to wrap warnings/errors neatly.

Otherwise the error and warning messages get chopped off and wrapped by
the terminal wherever they happened to end. That's ugly and hard to
read.

This mechanism attempts to wrap the text using the console width which
it attempts to determine in two ways, first with shutil which should
work in python 3.3 and above, and then with the curses python module. If
neither of those works, it just falls back to 80 columns which is not
ideal but is reasonable.

Change-Id: I961936295505f93f5f36eb6d9cebc5073b5f793b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27128
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Get rid of a redundant "Warning:" in the SConstruct.

The "warning()" method already prints "Warning:", so putting it in the
message itself means it gets printed twice.

Change-Id: Ic157355958fdf56739f865a926ecba071bb25c5e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27127
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Replace find_first_prog() with the built in Detect().

The built in environment method Detect() does the same thing, that is it
finds the first program available from a list of options.

Change-Id: I3763ae5cc9dd22ee322908c0a7a2c037dc91d5a5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27126
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Use the lsan-suppressions file when running internal commands.

These commands (like the marshal binary) might otherwise fail with
spurious leaks detected in the python library.

Change-Id: I042c2a811d465ac03f005672f328c0fb0b594494
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27125
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

misc: Add Gabe Black as the scons and util maintainer.

Change-Id: I222c25ebd7b28ddad4bb903b6fd9e15b429b1039
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27143
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu-o3: Fix unset scoreboard in vector mode switching

This is another fix for the AArch32-AArch64 interprocessing issue
introduced in
3d15150d cpu, arch, arch-arm: Wire unused VecElem code in the O3 model.

Register mapping between AArch32 and AArch64 is explicitly defined in
ARMv8 manual. This allows software to read registers right after a state
switch without writing them first, and it is indeed common for software
to save registers to memory first before using them.

In gem5's implementation of vector mode switching, however, vectors may
not be marked as ready right after a state switch. Software reads toward
vectors at this time will stall O3CPU forever. This patch fixes this by
marking all mapped vectors (or vector elements, depending on AArch32 or
AArch64) as ready right after switching vector mode.

Change-Id: I609552c543dad8da66939c0a3079d73d48e92163
Signed-off-by: Hsuan Hsu <hsuan.hsu@mediatek.com>
Signed-off-by: Howard Wang <Howard.Wang@mediatek.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26203
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Checkpoint from MOESI_hammer Ruby hangs

Fix MOESI_hammer checkpoint hanging.
The function markRemoved() should be called before hitCallback(),
not after it. The reason is that hitCallback() checks if draining is
complete based on the value of "m_outstanding_count". And since
markRemoved() is responsible for decrementing "m_outstanding_count",
hitCallback() does not see that there are no outstanding requests.

Reported by: Timothy Hayes
Jira: https://gem5.atlassian.net/browse/GEM5-331
Change-Id: I14c34be79843b172ae994ab1792fe4ce6cf5cf6e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25683
Reviewed-by: Timothy Hayes <timothy.hayes@arm.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

util: Add a file to suppress spurious lsan leaks in the python lib.

The python interpreter does some fancy things with memory which trips up
the lsan leak checker which comes along with asan. This file simply
tells lsan to ignore those leaks.

To use it when running a binary, set the LSAN_OPTIONS environment
variable to "suppressions=${PATH TO SUPPRESSIONS FILE}". To disable the
a report on the leaks that were suppressed, you should also set
"print_suppressions=0". Multiple options can be set by seperating them
with ":"s.

LSAN_OPTIONS=suppressions=util/lsan-suppressions:print_suppressions=0

Change-Id: Ie4d712c6b95f429e67361c41a9b545a8536f2511
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27124
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

scons: Use the scons environment when marshalling.

scons maintains an environment (in the shell sense) in the ENV
construction variable for use when running external programs. When we
run the "marshal" program which gathers up python objects to embed in
the gem5 binary, it's run by subprocess instead of through scons, and it
uses its own environment inherited from the host system.

Instead, this change makes the subprocess function use the scons
environment when calling "marshal". This ensures the environment is
consistent between this command and other commands scons runs.

This is usually not very important, but some tools like asan take
options set through the environment, and they may need to be adjusted
sometimes.

Change-Id: I671b447657ed8fad45fac7393cc1c09073bf3d3a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27123
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>

tests,misc: Updated presubmit YAML to use main.py '-t' flag

This minor change reduces the presubmit build time by about 10 to 15
minutes.

Change-Id: I3a87d1a720b17fd22a9dbdbeebfb32e4be178c56
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27064
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

tests: Migrated 10.linux-boot scons-based test to testlib

This test has purposely been designed to be easily extendible for future
x86 boot tests. Right now, it only runs two basic Ubuntu boot test
setups.

Change-Id: I81385b5dfc0764af2ec02999eb26e523bd09a595
Issue-on: https://gem5.atlassian.net/browse/GEM5-109
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26324
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Don't use args and kwargs on attachIO

This is matching the attachOnChipIO style, and fixing the error of the
dma_ports kwarg being forwarded to the _attach_mem

Change-Id: Ib3ecf2fc18c488d938bbbf63eab3d7693cdb7d06
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27086
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>

arm: Return whether a semihosting call was recognized/handled.

Otherwise there's no way to determine whether the return value was from
the semihosting mechanism itself, or from one of the calls. There would
also be no way to determine whether a call had actually happened.

Change-Id: Ie2da812172fe2f9c1e2b5be95561863bd12920b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25949
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>

arch-riscv: print information about faults.

Change-Id: Ic69b788d508bab1044b693860c7d942963bed3f9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25646
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

arch-riscv: added support for pseudo instructions.

Change-Id: I4f73f8fcf62def8815e82555fc2a67f89efc09d1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25645
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

arch,sim: Return whether or not a pseudo inst was recognized.

Otherwise there's no way to distinguish whether return values are from
the calls themselves, including what they mean in the context (success
or failure?) or the pseudo inst dispatch function itself.

Change-Id: I3e71c277f175c69af0d1adeb3299d88d095dfa84
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25948
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>

sim-se: Add special paths for MPI, libnuma, ROCm support

Add new pseudo files which are read by various runtime libraries
including MPI, libnuma, and ROCm. New paths include /proc/self/maps,
/dev/urandom, and /sys/devices/system/cpu/online.

Change-Id: I00a82788cff9d6f4f16fc56230b18be9b76c4015
Signed-off-by: Brandon Potter <Brandon.Potter@amd.com>
Signed-off-by: Michael LeBeane <Michael.Lebeane@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25367
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>

arm: Optionally enable gem5 extended semihosting calls.

ARM's semihosting interface defines call numbers up to 0xff to be
for standardized use, and says that custom calls should go above this
number.

This new mechanism will let the caller decide whether it wants to
enable these extended calls, or if they should be ignored and only
standard calls should be recognized.

Change-Id: I34b01a4439c8a88242971ac486e34d810b054baf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25947
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: Update mmap, munmap, mremap to use MemState

This updates the syscalls for mmap, munmap, and mremap. The mmap
changes now create a virtual memory area through the MemState class
to allow for lazy allocation of mmapped regions. This provides
substantial performance boost for sparse usage of mmaps. The munmap
syscall is added to reclaim the virtual memory area reserved for the
mmapped region. The mremap syscall moves or resizes an mmapped region
and updates the corresponding virtual memory area region to keep the
page tables in sync.

Change-Id: Ide158e69cdff19bc81157e3e9826bcabc2a51140
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26863
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

sim-se: Switch to new MemState API

Switch over to the new MemState API by specifying memory regions for
stack in each ISA, changing brkFunc to use MemState for heap memory,
and calling the MemState fixup in fixupStackFault (renamed to just
fixupFault).

Change-Id: Ie3559a68ce476daedf1a3f28b168a8fbc7face5e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25366
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sim-se: Extend MemState API to use VMAs

Extend the MemState API to handle tracking dynamically sized memory
regions of a Process class which may be added, moved, removed, or
change in size during the course of simulation. This utilizes the
virtual memory areas (VMA) class to track individual regions and
provides a fixup method to handle physical page allocation in case of
a page fault. This allows for lazy allocation of the stack, heap, and
mmap regions of memory.

Change-Id: I3ef10657e5f8e8f0e328bdf0aa15a27b1dde39bf
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25483
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

configs: Use ArmFsWorkload for Arm baremetal

Change-Id: Ie6bfdd9b30438bc6eaf22bc79dcc1690ffa039be
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26991
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

cpu: IntrControl, clear all and check helpers

This patch extends the IntrControl to provided additional member
functions for (1) clearing all pending interrupts in a PE and (2)
checking for any pending interrupt in a PE. These are intended to
be used from interrupt management related peripherals.

Change-Id: I06b553872ed469e7449b872a0716865773ace154
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26809
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

configs: Initialize atags_addr in baremetal.py

Change-Id: Iec797d4be607526d68a2813e188a32759418dbcc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27023
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

configs: Enable Semihosting for baremetal.py

This is enabled via the --semihosting option

Change-Id: If6961cba8ec4a3aa22e788db6fe0ae54e169bb9c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26993
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

configs: Make --disk-image optional in baremetal.py

Since the script could be used to run baremetal applications, we don't
have to enforce the presence of a disk image

Change-Id: I511515361cfd7a2e06ede0df3ddcc595de15f38b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26992
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>

power: Hook up the readlink system call.

Change-Id: I28dcbd6fb3c54479eefea26d810d10c00195cc08
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26830
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>

power: Add the AT_RANDOM aux vector to the initial stack.

This is blindly used by at least modern glibc-s

Change-Id: I8ee7872c8072ee8aa1b3718e988679968ac172d0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26829
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm: Make the semihosting implementation use GuestABI.

Remove the ability to not have an implementation for a semihosting call
in 32 or 64 bit mode since that was not actually being used. It can be
reintroduced if needed in the future.

Turn the physProxy helper function into a static function which
maintains a single secure port proxy. That makes the proxy available
outside of the ArmSemihosting class itself.

Change-Id: Ie99e7d79c08c039384250fab0c98117554c93128
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25946
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>

arch-arm: Make load_addr_mask=0 for ArmFsLinux only

This is restoring the situaton pre:

https://gem5-review.googlesource.com/c/public/gem5/+/26466

Where load_addr_mask was set to 0 (forcing the loader to discard
the kernel entry point) for LinuxArmSystem only.

With this patch the masking is done for ArmFsLinux workloads
only and it is using the default 0xffffffffffffffff (no masking)
for common ArmFsWorkload

Change-Id: I68970edcac61ad0de79433ffd84fef580a94b480
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27024
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>

arch-arm: Fix aapcs32/aapcs64 compilation issues

Some compilers won't build ARM due to how guest ABI
has been implemented.

The error is: "left shift count >= width of type"
[-Werror=shift-count-overflow]

The error is triggered when there is a left shift > the variable size
(in bits); this leads to undefined behaviour.

This is a compile time vs run time problem; the code is technically
fine, but the compiler is not able to understand this.

For example in aapcs64:

struct Argument<Aapcs64, Integer, typename std::enable_if<
 std::is_integral<Integer>::value>::type> : public Aapcs64ArgumentBase
{
    [...]
    if (sizeof(Integer) == 16 && state.ngrn + 1 <= state.MAX_GRN) {
        Integer low = tc->readIntReg(state.ngrn++);
        Integer high = tc->readIntReg(state.ngrn++);
        high = high << 64;
        return high | low;
    }
}

Even if the sizeof operator will be evaluated at compile time,
the block will be executed at runtime: the block will still be part of
the code if Integer = uint32_t.
The compiler will then throw an error because we are left shifting an
uint32_t by 64 bits.

Error arising on:
Compiler: gcc/5.4.0
Distro: Ubuntu 16.04 LTS

Change-Id: Iaafe030b7262c5fb162afe7118ae592a1a759a58
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26990
Reviewed-by: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Remove a check that the memory size is a multiple of the page size.

There are a few problems with this check.

1. Many ISAs support multiple page sizes.
2. Memories (particularly small ROMs) may not actually be in multiples
   of the page size.
3. In a heterogenous environment, there won't be a single page size even
   if each ISA picks a canonical page size.
4. Other than catching some egregious configuration mistakes, there's
   nothing functionally wrong/different about a memory that isn't evenly
   coverable in pages, especially in systems or configurations that
   don't even use paging.

Change-Id: I3cd241657318d2e3fd5a1226cb54fdebbf172788
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26423
Maintainer: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>

mips: Add the AT_RANDOM aux vector to the initial stack.

This is blindly used by at least modern glibc-s

Change-Id: I8fb904d487d0cb5f7747d063a6ed84894ee6b905
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26828
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Hook up fstat64 for SPARC64.

This seems to be used by a modern gcc toolchain.

Change-Id: Ia776f4d8b3f290336047d3a7e57f1bffac1feaa2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26827
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Add a definition of tgt_stat64 for SPARC64.

Change-Id: Ided4710d47436fbf8e34be2427dc7ed092a69f56
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26826
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Hook up but not implement the get/set context traps.

gem5 will panic if it encounters a trap it doesn't know what to do with.
Newer versions of glibc, gcc, etc., use the getcontext trap in setjmp
during startup.

This change hooks up a function for both the getcontext and setcontext
traps. The getcontext one just warns that it isn't implemented. If the
context it creates is never used (likely) then that should be fine for
now. If we ever try to actually use a context with setcontext, then
something bad will almost certainly happen if it's not implemented, and
we panic.

Change-Id: Id6797ac6955249d299e975c9c30360920d380e60
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26825
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add flash1 memory to VExpress_GEM5 platform

Change-Id: I013241ac99fe42cdef437a396732447726beedd0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26833
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>