mesa: Prepare for the MESA_FORMAT_* enum to be sparse.

To redefine MESA_FORMAT in terms of PIPE_FORMAT enums, we need to fix
places where we iterated up to MESA_FORMAT_COUNT.  I use
_mesa_get_format_name(f) == NULL as the signal that it's not an enum
value with a MESA_FORMAT.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa/st: Test round-tripping of all compressed formats.

We checked round-tripping of formats without fallbacks, but weren't
setting the compression support flags in the mock context and thus
needed to skip testing those.  Just set all the flags and assert that
no fallbacks are triggered, so we get full test coverage.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Stop defining a full separate format for RGBA_UINT8.

We have packed formats for RGBA and ABGR already, so we can just
pack/unpack code.

v2: Rebase on endianness macro rename

Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)

gallium: Add equivalents of packed MESA_FORMAT_*UINT formats.

These are the last formats that MESA_FORMAT had and PIPE_FORMAT
didn't.  The .csv entries channel sizes and swizzles all came from the
corresponding UNORM format.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: Add an equivalent of MESA_FORMAT_BGR_UNORM8.

This is the last unorm format that MESA_FORMAT had and PIPE_FORMAT
didn't.  Note that it's an array format on gallium's side as well,
since it's a NPOT pixel size.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: Add some more channel orderings of packed formats.

This covers everything that MESA_FORMAT had for packed unorm.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: Add defines for FXT1 texture compression.

This texture compression is exposed by 830 and 915, and to make
MESA_FORMAT match PIPE_FORMAT defines I need a corresponding
PIPE_FORMAT.

v2: Set is_hand_written so we don't try to generate pack/unpack code.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa/st: Add mapping of MESA_FORMAT_RGB_SNORM16 to gallium.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv/gfx10: fix primitive indices orientation for NGG GS

The primitive indices have to be swapped to follow the drawing
order.

This fixes corruption with Overwatch when NGG GS is force enabled.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

Revert "intel/blorp: Fix usage of uninitialized memory in key hashing"

This reverts commit 4432a2d14d80081d062f7939a950d65ea3a16eed.

Pretty much every SKQP test dies with this assertion:
skqp: ../src/mesa/drivers/dri/i965/brw_program_cache.c:102: hash_key: Assertion `item->key_size % 4 == 0' failed.

intel/blorp: Fix usage of uninitialized memory in key hashing

The automatically generated padding in structs contains
undefined values, force pack the structs to eliminate the
padding. Otherwise structs with the same values may generate
different hashes.

Valgrind output:

Conditional jump or move depends on uninitialised value(s)
 util_fast_urem32 (fast_urem_by_const.h:71)
 hash_table_search (hash_table.c:262)
 _mesa_hash_table_search (hash_table.c:296)
 anv_pipeline_cache_search_locked (anv_pipeline_cache.c:318)
 anv_pipeline_cache_search (anv_pipeline_cache.c:335)
 lookup_blorp_shader (anv_blorp.c:38)
 blorp_params_get_mcs_partial_resolve_kernel (blorp_clear.c:1112)
 blorp_mcs_partial_resolve (blorp_clear.c:1205)
 anv_image_mcs_op (anv_blorp.c:1742)
 anv_cmd_predicated_mcs_resolve (genX_cmd_buffer.c:774)
 transition_color_buffer (genX_cmd_buffer.c:1159)
 cmd_buffer_end_subpass (genX_cmd_buffer.c:4840)

Uninitialised value was created by a stack allocation
 blorp_params_get_mcs_partial_resolve_kernel (blorp_clear.c:1103)

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

osmesa/tests: Extend render test to cover other working cases

Only the GL_UNSIGNED_BYTE cases actually work, the rest all fail, but we
should test the working cases to ensure that they continue to work.

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/osmesa: Convert osmesa test to gtest

This uses a bunch of additional C++ features for niceness and safety.

Reviewed-by: Brian Paul <brianp@vmware.com>

meson: gtest needs pthreads

Reviewed-by: Brian Paul <brianp@vmware.com>

panfrost: Pipe the GPU ID into compiler and disassembler

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

aco: workaround Tonga/Iceland hardware bug

The workaround got accidentally moved to the wrong place

Fixes: 08d510010b7586387e363460b98e6a45bbe97164 aco: increase accuracy of SGPR limits
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

panfrost: Release the ctx->pipe_framebuffer ref

ctx->pipe_framebuffer contains the last bound FB state, let's release
resources pointed by this FB state when the context is destroyed.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Destroy the upload manager allocated in panfrost_create_context()

pipe->stream_uploader has been allocated with u_upload_create_default()
in panfrost_create_context(), let's destroy it in the context destroy
path.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

intel/gen_decoder: Fix unused-but-set-variable warning

This commit fixes the following warning:
../src/intel/common/gen_decoder.c: In function ‘gen_spec_load_from_path’:
../src/intel/common/gen_decoder.c:741:11: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
  741 |    size_t len, filename_len = strlen(path) + 20;
      |           ^~~

Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir: fix unused function warning in src/compiler/nir/nir.c

This commit fixes the following warning:
../src/compiler/nir/nir.c:1827:1: warning: ‘dest_is_ssa’ defined but not used [-Wunused-function]
 1827 | dest_is_ssa(nir_dest *dest, void *_state)
      | ^~~~~~~~~~~

Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: fix unused variable warning in find_and_update_previous_uniform_storage

This commit fixes the following warning:
../src/compiler/glsl/gl_nir_link_uniforms.c: In function ‘find_and_update_previous_uniform_storage’:
../src/compiler/glsl/gl_nir_link_uniforms.c:166:16: warning: unused variable ‘num_blks’ [-Wunused-variable]
  166 |       unsigned num_blks = nir_variable_is_in_ubo(var) ?
      |                ^~~~~~~~

Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: fix unused variable warning in nir_lower_vars_to_explicit_types

This commit fixes the following warning:
../src/compiler/nir/nir_lower_io.c: In function ‘nir_lower_vars_to_explicit_types’:
../src/compiler/nir/nir_lower_io.c:1435:22: warning: unused variable ‘supported’ [-Wunused-variable]
 1435 |    nir_variable_mode supported = nir_var_mem_shared | nir_var_shader_temp | nir_var_function_temp;
      |                      ^~~~~~~~~

Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

gallium: dri2: Use index as plane number.

This fix wrong color when playing video under Android + virgl
configuration.

Fixes: 2decad495f3 ("gallium/dri2: Support images with multiple planes for modifiers")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Lepton Wu <lepton@chromium.org>

anv: implement VK_KHR_separate_depth_stencil_layouts

v2: Use ternary to simplify code (Jason)

v3: Reorder switch cases to follow existing section ordering (Nanley)
    Add missing comment in cmd_buffer_end_subpass() about new layout (Nanley)

v4: Fix layout comparison for stencil case (Nanley)
    Update a few more comments (Nanley)
    Move VK_IMAGE_LAYOUT_STENCIL_ATTACHMENT_OPTIMAL_KHR in color
    attachment case for future stencil-CCS support (Nanley)

v5: Missed comments update (Nanley)
    Updated relnotes.txt (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

Revert "ci: Switch over to an autoscaling GKE cluster for builds."

This reverts commit c9df92bf795af878c38538c85f781291c78ec513.

It turns out that gitlab-runner uses kubernetes all wrong, spawning Pods
and sshing into them to run the script instead of Jobs containing the
script to run.  This means that when anything goes wrong with the pod
(autoscale, preemption, VM maintenance, cluster reconfiguration), the job
fails and only sometimes gets handled as a runner system failure.  Even
worse, due to bugs in either the runner or k8s itself, some classes of
timeout-related failure end up not being reported as failures, and the job
will incorrectly report success!

Disable using the "autoscale" cluster until we can do something else
(docker-machine instead of k8s, or the custom third-party k8s-native
runner).

Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>

panfrost: Print the right zero field

Copy paste error.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

docs: update calendar, add news item and link release notes for 19.2.2

docs: add sha256 sum to 19.2.3 release notes

docs: add release notes for 19.2.3

panfrost: Generate polygon list manually for SFBD

On clears without draws, the SFBD GPUs need for userspace to generate
the trivial polygon list.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Decode blend shaders for SFBD

Also set MALI_HAS_BLEND_SHADER as needed.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Take into account texture layers in SFBD

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Rework format encoding on SFBD

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Set 0x10 bit on mali_shader_meta.unknown2_4 on T720

Testing shows that it's needed.

Also remove ctx->is_t6xx as it was the last use of it.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Add checksum fields to SFBD descriptor

During tests on T720, these fields were discovered.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

zink: do advertize integer support in shaders

This is supported, so let's correct this.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>

zink/spirv: implement ball_fequal[2-4]

zink/spirv: implement ball_iequal[2-4]

zink/spirv: implement bany_inequal[2-4]

zink/spirv: implement bany_fnequal[2-4]

zink/spirv: support loading bool constants

Seems I missed this before; let's add support for this.

zink/spirv: drop temp-array for component-count

gitlab-ci: Don't build libdrm for ARM

The Debian packages work fine. Saves a little bit of time and disk
space.

Reviewed-by: Eric Anholt <eric@anholt.net>

gitlab-ci: Use separate arm64 build/test docker images

The image used for test jobs is only about 1/6 as big as before, which
may help avoid some issues with some of the test boards.

Inspired by https://gitlab.freedesktop.org/mesa/mesa/issues/2046 .

v2:
* Leave LIBDRM_VERSION at 2.4.99 (Daniel Stone)
* Delete more build artifacts from dEQP tree (Daniel Stone)
v3:
* Set LD_LIBRARY_PATH for ldd

Acked-by: Daniel Stone <daniels@collabora.com> # v2
Reviewed-by: Eric Anholt <eric@anholt.net> # Except for the ldd line

zink: use u_blitter when format-reinterpreting

zink: always allow sampling of images

This is required if we're going to blit from/to it using u_blitter.

zink: transition resources before resolving

zink: disable fragment-shader texture-lod

We don't support nir_texop_txd, which is required by this cap. So let's
disable it for now.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16e ("zink: introduce opengl over vulkan")

zink: make sure src image is transfer-src-optimal

Fixes: d2bb63c8d4c ("zink: Use optimal layout instead of general. Reduces valid layer warnings. Fixes RADV image noise.")

zink: do not advertize coherent mapping

We do not support them yet, so let's not pretend.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16e ("zink: introduce opengl over vulkan")

zink: always allow mutating the format

There's no good way to know if a texture-view will be created, so we
just have to accept it for all resources.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16e ("zink: introduce opengl over vulkan")

zink: use actual format for render-pass

We should use the format derived from the image-view here, not from the
image itselt. Otherwise, we'll end up with incompatible render-passes.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 8d46e35d16e ("zink: introduce opengl over vulkan")

radeonsi: fix shader disk cache key

Use unsigned values otherwise signed extension will produce a 64 bits value where
the 32 left-most bits are 1.

Fixes: 2afeed30101 ("radeonsi: tell the shader disk cache what IR is used")

radv: implement VK_EXT_subgroup_size_control

This extension allows to control the subgroup size by allowing a
varying subgroup size and also specifying a required subgroup size.

This implementation only allows to specify a required subgroup
size for compute shaders because there is some caveats with
other shader stages (eg. NGG with geometry shader). This
basically allows apps to use Wave32 for compute shaders.

This extension is enabled for all chips but only GFX10 supports
Wave32. ACO doesn't support it.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: rely on shader's wavesize when computing NGG info

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: determine shaders wavesize at pipeline level

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: hardcode the number of waves for the GFX6 LS-HS bug

It's always 64.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/gfx10: enable wave32 for compute based on shader's wavesize

This will allow to change wavesize on-demand.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir: fix packing of nir_variable

The maximum number of descriptor sets is indeed 32 but without
the sign bit.

The maximum number of bindings for RADV is way larger, keep it
as 32-bit.

Fixes: 96e6ef80d93 ("nir: pack the rest of nir_variable::data")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>

radv: fix 32-bit compiler warnings

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2031
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add a note about perftest/debug options

Now that all environment variables are documented, it would be
appreciated if we can keep this up-to-date.

[skip ci]

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

docs: document all RADV environment variables

Requested by https://gitlab.freedesktop.org/mesa/mesa/issues/2022

[skip ci]

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir/serialize: pack nir_variable flags

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/serialize: store 32-bit object IDs instead of 64-bit

That means we have only 30 bits for object IDs, because 2 bits are
sometimes used for something else.

This decrease the uncompressed shader size for the biggest Borderlands 2
shader from 33.6 KB to 23.2 KB. (31% decrease)

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/serialize: don't expand 16-bit variable state slots to 32 bits

the swizzle also needs only 16 bits

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: pack the rest of nir_variable::data

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

radeonsi: keep serialized NIR instead of nir_shader in si_shader_selector

This decreases memory usage, because serialized NIR is more compact.

The main shader part is compiled from nir_shader.
Monolithic shader variants are compiled from nir_binary.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radeonsi: don't keep compute shader IR after compilation

not needed. We also need to free TGSI in the destroy function for the case
when an app is terminated and si_create_compute_state_async is never
executed because of util_queue_drop_job.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radeonsi: use IR SHA1 as the cache key for the in-memory shader cache

instead of using whole IR binaries. This saves some memory.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

lima: add support for gl_PointSize

GP handles gl_PointSize similar to gl_Position, i.e. it needs
separate buffer and it has special type in varying descriptors, also
for indexed draw we need to emit special PLBU command to pass
address of gl_PointSize buffer.

Blob also clamps gl_PointSize to 1 .. 100 (as well as line width),
so let's do the same.

Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

mesa/imports: let the build system detect strtok_r()

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2013
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Prodea Alexandru-Liviu <liviuprodea@yahoo.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

meson: require `nm` again on Unix systems

This was made optional in ff9bf223c24143260a97 ("meson: make nm binary optional")
for Windows, but proper windows has been added and `nm` is now only used
on Unix systems.

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviwed-by: Dylan Baker <dylan@pnwbakers>

meson: add windows support to symbols checks

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviwed-by: Dylan Baker <dylan@pnwbakers>

meson: move the generic symbols check arguments to a common variable

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviwed-by: Dylan Baker <dylan@pnwbakers>

meson: add variable to control the symbols checks

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviwed-by: Dylan Baker <dylan@pnwbakers>

mesa: fix call to _mesa_lookup_vao_err

Fixes: 3e842a0b0ea ("mesa: rework _mesa_lookup_vao_err to allow usage from EXT_dsa")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2055
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meson: Add dep_glvnd to egl deps when building with glvnd

Otherwise if glvnd is not installed systemwide, but only in a prefix,
it's headers wont be found. This happens because if it's headers are in
/usr/include/ then another dependence will provide the necessary -I
arguments and compilation will work.

Fixes: 035ec7a2bb2d5e413ac945b8f012185a0e187d5e
       ("meson: Add support for EGL glvnd")
Acked-by: Eric Engestrom <eric@engestrom.ch>

util/u_endian: Add error checks

As suggested by Eric Engestrom and Michel Dänzer.

util: rename PIPE_ARCH_*_ENDIAN to UTIL_ARCH_*_ENDIAN

As requested by Tim.

This was generated with:
grep 'PIPE_ARCH_.*_ENDIAN' -rIl | xargs sed -ie 's@PIPE_ARCH_\(.*\)_ENDIAN@UTIL_ARCH_\1_ENDIAN@'g

v2: - add this patch

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

gallium/osmesa: Use PIPE_ARCH_*_ENDIAN instead of little_endian function

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

mesa/main: delete now unused _mesa_little_endian

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

mesa/swrast: replace instances of _mesa_little_endian with preprocessor

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

mesa/main: replace uses of _mesa_little_endian with preprocessor

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

util/u_endian: set PIPE_ARCH_*_ENDIAN to 1

This will allow it to be used as a drop in replacement for
_mesa_little_endian in a number of cases.

v2: - Always define PIPE_ARCH_LITTLE_ENDIAN and PIPE_ARCH_BIG_ENDIAN,
      define the one that reflects the host system to 1 and the other to 0
    - replace all uses of #ifdef, #ifndef, and #if defined() with #if
      and #if ! with PIPE_ARCH_*_ENDIAN

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

util/u_endian: Use _WIN32 instead of _MSC_VER

_WIN32 is defined by basically all windows compilers (MSVC, ICL, MinGW),
wereas _MSC_VER is not defined by MinGW. Without this change MinGW falls
through and doesn't define PIPE_ARCH at all, and is caught by some extra
code in gallium.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

dri/osmesa: use preprocessor for selecting endian code paths

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

r100: Use preprocessor to select big vs little endian paths

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

r200: use preprocessor for big vs little endian checks

Instead of using a function at runtime we can just build the right code
for the right platform.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

svga: check return value of define_query_vgpu{9,10}

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

gitlab-ci: Run only LAVA jobs in special-named branches

Run only jobs needed for testing on LAVA devices if a branch starts with
lava-ci-.

This allows developers to have faster test cycles as these pipelines
take only a bit above 8 minutes. Also has the advantage of conserving
resources.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

mesa: add EXT_dsa glGetVertexArray* 4 functions

The implementation doesn't share much with get.c because:
  * the refactoring needed for get.c to not depend on ctx->Array.VAO would
    be quite large
  * glGetVertexArray* would still need to filter pname to only accept the one
    specified by the spec
  * these functions are getter, the implementation is trivial (the complexity
    is in the correct filtering of pname input)

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: extract helper function from _mesa_GetPointerv

Will be used by EXT_dsa gllGetVertexArrayPointervEXT implementation.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa EnableVertexArrayAttribEXT / DisableVertexArrayAttribEXT

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glEnableVertexArrayEXT / glDisableVertexArrayEXT

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add gl_vertex_array_object parameter to client state helpers

This will allow to use the same helper for the EXT_direct_state_access
implementation.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glVertexArray* functions implementation

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add vao/vbo lookup helper for EXT_dsa

Add a single helper dealing with the lookup of both the vao
and the vbo to avoid duplicating this code in all the
glVertexArray* functions.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: rework _mesa_lookup_vao_err to allow usage from EXT_dsa

ARB_dsa and EXT_dsa slightly differs when an uninitialized VAO
is requested.
In this case ARB_dsa fails while EXT_dsa requires to initialize
the object.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glVertexArray* functions declarations

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: pass vao as a function paramter

This change will allow reusing the same function for the
EXT_direct_state_access implementation.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>