gallivm: Minor comment cleanup

Signed-off-by: Adam Jackson <ajax@redhat.com>

mesa: fix texture storage multisample prototypes harder.

I just noticed the warnings since I fixed the other bit.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g/llvm: Update LLVM_REVISION

r600g/llvm: use native encode for tex

glapi: fix storage multisample build errors

Reported on #radeon by udovdh

Signed-off-by: Dave Airlie <airlied@redhat.com>

docs: mark ARB_texture_storage_multisample done

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

i965: enable ARB_texture_storage_multisample on Gen6+

This can be enabled everywhere that ARB_texture_multisample is
supported -- ARB_texture_storage is supported on everything.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: allow multisample texture targets in [Get]TexParameter*

ARB_texture_storage_multisample allows texture parameters to be
queried for TEXTURE_2D_MULTISAMPLE and TEXTURE_2D_MULTISAMPLE_ARRAY
targets.

Some parameters may also be set, with the following exceptions:

- TEXTURE_BASE_LEVEL may not be set to a nonzero value; generates
   INVALID_OPERATION

- any state which appears in the `per-sampler` state table may not
  be set; generates INVALID_OPERATION

V2: Don't introduce bogus handling of TEXTURE_MAX_LEVEL

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: improve reported function name in Tex*Multisample

Now that there are 4 variants, just pass the function name into
teximagemultisample rather than reconstructing it.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: add enable bit for ARB_texture_storage_multisample

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

glapi: add definition of ARB_texture_storage_multisample

Adds XML for the extension, dispatch_sanity enabling, and the two new
entrypoints. These are both implemented by calling the shared
teximagemultisample() with immutable=GL_TRUE.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: add support for immutable textures to teximagemultisample()

The new entrypoints will come later, but this adds the actual logic for
supporting immutable multisample textures:

- The immutability flag is set as desired.
- Attempting to modify an immutable multisample texture produces
  INVALID_OPERATION.

Note: The extension spec does not mention adding this behavior to
TexImage*Multisample, but it seems like the reasonable thing to do.

V2: - Cover missing error cases (unsized formats; texture object zero)

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
[V1] Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: extract _mesa_is_legal_tex_storage_format helper

This is about to be used in teximagemultisample() when immutable=true.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Delete VERT_ATTRIB_GENERIC_NV and VERT_BIT_GENERIC_NV macros.

These haven't been used since we deleted NV_vertex_program support.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Fix an inconsistency inb the VUE map with gl_ClipVertex on gen4/5.

We are intentionally not allocating a slot for gl_ClipVertex.  But by
leaving the bit set in the slots_valid, the fragment shader's computation
of where varyings are in urb entry coming out of the SF would be off by
one.  Fixes rendering in Freespace 2 SCP, and improves rendering in TF2.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62830
Tested-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
NOTE: This is a candidate for the 9.1 branch.
Reviewed-and-tested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

intel: Remove a never-taken debug print path.

Alessandro Pignotti noted when I added this code in commit
0e723b135bfd59868c92c3ae243f1adaedaec3a5 that it's in the else block for
"if (busy)", so this debug print couldn't happen.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/mesa: add ir_lod case in GLSL->TGSI code to silence warning

glsl: Generated masked write instead of vector array index for UBO lowering

When reading a column from a row-major matrix, we would slot the single
value read into the vector using an ir_dereference_array of the vector
with a constant index.  This will (eventually) get optimized to a
masked-write, so just generate the masked write in the first place.

v2: Remove unused variable 'chan'.  Suggested by Ken.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eric Anholt <eric@anholt.net>

glsl: Replace open-coded dot-product with dot

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Paul Berry <stereotype441@gmail.com>

glsl: Replace constant-index vector array accesses with swizzles

Search and replace:

    ][0] -> ].x
    ][1] -> ].y
    ][2] -> ].z
    ][3] -> ].w

Fixes piglit tests inverse-mat[234].{vert,frag}.  These tests call the
inverse function with constant parameters and expect proper constant
folding to happen.  My suspicion is that this patch papers over some bug
in constant propagation involving array accesses.

Either way, all of these accesses eventually get lowered to swizzles.
This cuts out the middle man (saving a trivial amount of CPU).

NOTE: This is a candidate for the 9.1 branch.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Paul Berry <stereotype441@gmail.com>

glsl: Add missing bool case in glsl_type::get_scalar_type

Since the case was missing bec4->get_scalar_type() would return bvec4,
but vec4->get_scalar_type() would return float.

NOTE: This is a candidate for stable branches.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965: Fix INTEL_DEBUG=shader_time for fragment shaders with discards.

"discard" instructions generate HALT instructions which jump to a final
HALT near the end of the shader.  Previously, fs_generator created this
final jump target when it saw the first FS_OPCODE_FB_WRITE, causing it
to jump right before the FB write epilogue.  This is normally good.

However, INTEL_DEBUG=shader_time also has an epilogue section which
records the final timestamp.  The frontend emits IR for this just before
FS_OPCODE_FB_WRITE.  Unfortunately, this led to the following ordering:

1. Shader Time Epilogue
2. Final HALT (where discards jump)
3. Framebuffer Write Epilogue

This meant that discarded pixels completely skipped the shader time
epilogue, causing no ending timestamp to be written.  This obviously
led to inaccurate results.

This patch adds a new FS_OPCODE_PLACEHOLDER_HALT in the IR stream just
before any epilogue sections.  This is where the final HALT should be
generated, and makes it easy to ensure the correct ordering:

1. Final HALT
2. Shader Time Epilogue
3. Framebuffer Write Epilogue

For shaders that don't discard, this opcode compiles away to nothing.
The scheduler adds barrier dependencies to make sure that it doesn't
get moved above any FS_OPCODE_DISCARD_JUMP instructions.

One 8-wide shader in GLBenchmark 2.7 dropped from 2291.67 Gcycles to
a mere 5.13 Gcycles.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Add names for all instructions to dump_instruction() in FS and VS.

I'd previously added the minimum names to understand my dumps, but this
makes dumps in general much easier to read.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Enable ARB_texture_query_lod.

v2: Support Ironlake as well.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Generate LOD sampler message from ir_lod.

v2: Support Ironlake as well.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: Implement ARB_texture_query_lod

v2 [mattst88]:
   - Rebase.
   - #define GL_ARB_texture_query_lod to 1.
   - Remove comma after ir_lod in ir.h for MSVC.
   - Handled ir_lod in ir_hv_accept.cpp, ir_rvalue_visitor.cpp,
     opt_tree_grafting.cpp.
   - Rename textureQueryLOD to textureQueryLod, see
     https://www.khronos.org/bugzilla/show_bug.cgi?id=821
   - Fix ir_reader of (lod ...).
v3 [mattst88]:
   - Rename textureQueryLod to textureQueryLOD, pending resolution of
     Khronos 821.
   - Add ir_lod case to ir_to_mesa.cpp.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Use measured Gen7 instruction timings on Gen6.

x before
+ after
+------------------------------------------------------------------------------+
|   x                                   x   +                                  |
|   xx  ++                              x   +                                  |
|   xx  ++ +                           xx   ++                                 |
|x xxx x+++++          +           xxx x*x+*+++ +         x                   +|
|   |_____|____________A______A____M____M_|_______|                            |
+------------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
    x  23       8083.78       8287.83       8205.55     8162.7461     68.307951
    +  23       8107.56       8358.74       8224.33     8186.1765     71.506301
    No difference proven at 95.0% confidence

Reviewed-by: Eric Anholt <eric@anholt.net>

i965/fs: Increase and document MAD latency on Gen7.

58% of mad(8) generated in shader-db are reading registers from the same
bank.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965/fs: Add LRP instruction latency.

Set its latency to what happens to be the default floating-point
instruction latency. One day we may want to handle latency based on
register bank information.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965/fs: Add Haswell cycle timings

Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Note that write-after-write dependencies are blocking.

Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Reword comment about the shared mathbox.

Reviewed-by: Eric Anholt <eric@anholt.net>

gallivm: consolidate some half-to-float and r11g11b10-to-float code

Similar enough that we can try to use shared code.
v2: fix a stupid bug using wrong variable causing mayhem with Inf and NaNs.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com

mesa: provide default implementation of QuerySamplesForFormat

Previously at least i915 failed to provide an implementation, but
exposed ARB_internalformat_query anyway, leading to crashes when
QueryInternalformativ was called.

Default implementation just returns 1 for everything, so is suitable for
any driver which does not support multisampling.

V2: - Move from intel to core mesa.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nvc0: implement MP performance counters

There's more, but this only adds (most) of the counters that are
handled directly by the shader processors.
The other counter domains are not handled on the multiprocessor and
there are no FIFO object methods for configuring them.
Instead, they have to be programmed by the kernel via PCOUNTER, and
the interface for this isn't in place yet.

nvc0: enable compression when supported

nvc0: use NOUVEAU_GETPARAM_GRAPH_UNITS to get MP count

nv50,nvc0: fix 3d blits, restore viewport after blit

nv50: fix 3D render target setup

llvmpipe: put .bmp extension on dumped image files

llvmpipe: add 'f' suffix to 1.0 in fixed_to_float()

draw: fix some build breakage when LLVM is not used

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62883
Tested-by: Vinson Lee <vlee@freedesktop.org>

mesa: handle STATE_CURRENT_ATTRIB_MAYBE_VP_CLAMPED for parameter printing

Reviewed-by: Brian Paul <brianp@vmware.com>

i965: Tidy shader time printing code by using printf's field widths.

We can use %-6s%-6s rather than manually counting characters, resulting
in much more readable code.

This necessitates a small secondary change: using "total fs16" and ""
now causes the "" string to be padded out to 6 characters, resulting in
too much whitespace.  Splitting it into "total" and "fs16" produces the
same output as before.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vs: Include URB payload setup in shader_time.

This much more accurately reflects the cost of the vertex shader, since
the payload setup is often a significant fraction of the instructions in
the VS.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vs: Use a send from a 2-register VGRF for shader time writes.

This will let us emit it later, after we're setting up MRFs for the
URB write.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vs: Teach copy propagation about sends from GRFs.

This incidentally also teaches it a bit about gen6 math -- we now allow
unswizzled, unmodified GRF temps as the sources for math.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vs: Prepare split_virtual_grfs() for the presence of SENDs from GRFs.

v2: Fix silly bool handling, and don't add new tabs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Include everything but the final FB write in shader_time.

Previously, if you just wrote a constant color to the render target, no
time got noted at all.  This is convenient for doing single-instruction
timings, but not so much for actual program analysis.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Switch shader_time writes to using GRFs.

This avoids conflicts between shader_time and FB writes, so we can include
more of the program under our profiling.  This does mean hiding more of
the message setup from the optimizer, which doesn't have a way to handle
multi-reg sends from GRFs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Provide more detailed information to match shader_time to programs.

Ken asked me the other day what -1 vs 0 vs 3 vs other meant in our shader
names, and I realized that it was really unclear.  I'd like to do even
better, like noting which one is the clear shader, but that would require
exposing the metaops struct to the driver.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Track ARB program state along with GLSL state for shader_time.

This will let us do much better printouts for non-GLSL programs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/dri: fix crash with HUD and single buffering

st/mesa: remove leftover printfs from ReadPixels

Oops, I thought I had removed all debugging code.

i965/fs: Improve performance of copy propagation dataflow using bitsets.

Reduces compile time of l4d2's slowest shader by 17.8% +/- 1.3% (n=10).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

llvmpipe/draw: Fix texture sampling in geometry shaders

We weren't correctly propagating the samplers and sampler views
when they were related to geometry shaders.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

draw/llvm: Cleanup the store debugging code

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

draw: Allocate the output buffer for output primitives

We were allocating the output buffer but using the input
primitives. We need to allocate that buffer using the
maximum number of output, not input, primitives.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

gallivm: Implement the breakc instruction

Required by more modern examples. Like BRK but with a condition.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

gallivm: implement implicit primitive flushing

TGSI semantics currently require an implicit endprim at the end
of GS if an ending primitive hasn't been emitted.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

gallium/llvm: implement geometry shaders in the llvm paths

This commits implements code generation of the geometry shaders in
the SOA paths. All the code is there but bugs are likely present.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

draw/gs: Fetch more than one primitive per invocation

Allows executing gs on up to 4 primitives at a time. Will also be
required by the llvm code because there we definitely don't want
to flush with just a single primitive.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

draw/gs: Abstract the portions of GS that are tgsi specific

To be able to add llvm paths later on we need to have some common
interface for them.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

draw/llvm: Remove unused gs_constants from jit_context

The member was never used and we'll need to handle it differently
because gs will also need samplers/textures setup.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

graw/gs: add missing max output vertices to all tests

A few tests were missing this crucial property.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

radeonsi: add cs tracing v3

Same as on r600, trace cs execution by writting cs offset after each
states, this allow to pin point lockup inside command stream and
narrow down the scope of lockup investigation.

v2: Use WRITE_DATA packet instead of WRITE_MEM
v3: Remove useless nop packet

Signed-off-by: Jerome Glisse <jglisse@redhat.com>

mesa: only check sample count if we actually wanted multisampling

Fixes various test fallout from 90b5a2425a on Pineview, which claims to
support ARB_internalformat_query but doesn't actually provide the
driverfunc.

That driver is still broken [GetInternalformativ will still segfault!]
but it was silly to be going through the sample count logic in the
nonmultisampling case at all.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeon/llvm: document LLVM commit

We need at least that revision to work correctly now.

Signed-off-by: Christian König <christian.koenig@amd.com>

radeonsi: add preloading for all samplers

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: add preloading of all constants

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: mark most intrinsics as readnone/nounwind

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: mark all loads as constant

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: remove wqm intrinsic

Now the backend handles that itself.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeon/llvm: remove uneeded inclusion

The include isn't needed and the file has moved with LLVM master.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

glsl_to_tgsi: avoid creating arrays if driver doesn't support them

Avoid creating arrays if we replace indirect addressing anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>

glsl_to_tgsi: make simplify_cmp work with arrays

Even when we have arrays it is possible for simplify_cmp
to work on temps, just not on arrays.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62696
Signed-off-by: Christian König <christian.koenig@amd.com>

gallium/docs: document get_driver_query_info

r600g: add a driver query returning the amount of requested VRAM and GTT memory

r600g: add a driver query returning the number of draw_vbo calls

between begin_query and end_query

st/dri: integrate the HUD

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium: implement a heads-up display module

Reviewed-by: Brian Paul <brianp@vmware.com>
v2: lots of cosmetic changes

gallium: add interface for driver queries like performance counters, etc.

The pipe query interface is reused. The list of available queries can be
obtained using pipe_screen::get_driver_query_info.

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/tgsi: fix valgrind warning

"Conditional jump or move depends on uninitialised value(s)"

Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: fix crash with blit-based GetTexImage

https://bugs.freedesktop.org/show_bug.cgi?id=62573

Tested-by: Andreas Boll <andreas.boll.dev@gmail.com>

cso: add constant buffer save/restore feature for postprocessing

Postprocessing is an internal meta op and should restore the states
it changes.

radeonsi: fix crash while binding a NULL constant buffer

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

r600g: fix crash while binding a NULL constant buffer

r300g: fix crash while binding a NULL constant buffer

r600g: Use virtual address for PIPE_QUERY_SO* in r600_emit_query_end

Virtual address is used for PIPE_QUERY_SO* queries in
r600_emit_query_begin, but not in r600_emit_query_end.

This will trigger a GPU fault when one of those queries is
made and virtual address is enabled.

Note: this is a candidate for the 9.1 branch

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

freedreno: use u_debug for debug env vars

Signed-off-by: Rob Clark <robdclark@gmail.com>

glsl ir: add as_dereference_record

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium: undef PACKAGE_* macros to silence warnings

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

gallivm: init vars to silence warnings

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

swrast: init vars to silence warnings

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

freedreno: prefer sw upload for textures

Since we are UMA, in most cases the GPU blit doesn't make much sense for
texture upload.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno: track maximal scissor bounds

Optimize out parts of the render target that are scissored out by taking
into account maximal scissor bounds in fd_gmem_render_tiles().

This is a big win on things like gnome-shell which frequently do partial
screen updates.

Signed-off-by: Rob Clark <robdclark@gmail.com>

android: fix Android.mk bug in mesa/drivers/dri/common

target-specific variables are undefined when used as pre-requisites.
instead, use secondary-expansion.

I noticed this when building the patch:
     i965: Add a driconf option to disable flush throttling

Signed-off-by: Adrian Marius Negreanu <adrian.m.negreanu@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

mesa: Disable validate_ir_tree() on release builds.

Since half of ir_validate uses asserts() (the other using printf() then
abort()), there's not much use to calling it in a release build.  Cuts
6.3% of the startup time of TF2.

NOTE: This is a candidate for the stable branches.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallivm: move code for dealing with rgb9e5 and r11g11b10 formats to own file

This is really not generic conversion stuff and the code very particular to
these formats.

llvmpipe: Fix assertions with assignment instead of comparison.

Fixes assign instead of compare defects reported by Coverity.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>