spirv: Rename get_shared_nir_atomic_op to get_var_nir_atomic_op

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Add theoretical support for single component pointers

Up until now, all pointers have been ivec2s.  We're about to add support
for pointers to workgroup storage and those are going to be uints.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Use offset_pointer_dereference to instead of get_vulkan_resource_index

There is no good reason why we should have the same logic repeated in
get_vulkan_resource_index and vtn_ssa_offset_pointer_dereference.  If
we're a bit more careful about how we do things, we can just use the one
function and get rid of the other entirely.  This also makes the push
constant special case a lot more clear.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Refactor a couple of pointer query helpers

This commit moves them both into vtn_variables.c towards the top, makes
them take a vtn_builder, and replaces a hand-rolled instance of
is_external_block with a function call.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Refactor the base case of offset_pointer_dereference

This makes us key off of !offset instead of !block_index.  It also puts
the guts inside a switch statement so that we can handle more than just
UBOs and SSBOs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Add a switch statement for the block store opcode

This parallels what we do for vtn_block_load except that we don't yet
support anything except SSBO loads through this path.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

spirv: Use a dereference instead of vtn_variable_resource_index

This is equivalent and means we don't have resource index code scattered
about.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

mesa: add const qualifier on _mesa_is_renderable_texture_format()

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: add const qualifier on _mesa_base_fbo_format()

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

mesa: s/%u/%d/ in _mesa_error() call in check_layer()

The layer parameter is signed.  Fixes the error message seen when
running the arb_texture_multisample-errors test which checks a
negative layer value.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: simplify/improve some _mesa_error() calls in teximage.c

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: trivial whitespace fixes in transformfeedback.c

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add const qualifier in test_attachment_completeness()

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: remove unneeded #include in st_format.h

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: rename a few vars to 'bindings'

To be consistent.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: whitespace fixes in st_format.c

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

freedreno/a5xx: hide ARB_base_instance

Grrr..

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: handle input/output component

After the mesa/st nir linking support, we start to see inputs/outputs
like:

   decl_var shader_out INTERP_MODE_NONE float packed:uv (VARYING_SLOT_VAR9.x, 1, 0)
   decl_var shader_out INTERP_MODE_NONE float packed:uv@0 (VARYING_SLOT_VAR9.y, 1, 0)

(ie. were location_frac != .x)

Unfortunately I overlooked the addition of the component parameter to
load_input/store_output, so when we started encountering inputs/outputs
with component other than .x, we'd end up loading/storing the wrong
input/output.

Signed-off-by: Rob Clark <robdclark@gmail.com>

mesa/st: move cloning of NIR shader for compute

Since in the NIR case, driver takes ownership of the NIR shader, we need
to clone what is passed to the driver.  Normally this is done as part of
creating the shader variant (where is clone is anyways needed).  But
compute shaders have no variants, so we were cloning earlier.

The problem is that after the NIR linking optimizations, we ended up
cloning *before* all the lowering passes where done.

So move this into st_get_cp_variant(), to make compute shaders work more
like other shader stages.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

r600: refactor and export some shader selector code for compute

This just moves some code around to make it easier to add compute.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: add compute support to compressed resource handling.

This just adds support for decompressing compute resources.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: update max threads per block for evergreen compute

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/shader: add local memory support to shader assembler.

This is needed for compute shaders.

v1.1: make work for vectors, fix missing lds ops.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/cs: add support for compute to image/buffers/atomics state

This just adds the compute paths to state handling for the
main objects

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: handle compute null key shader state

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: add some missing cayman register defines

These are just taken from the kernel, and were seen in some fglrx dumps.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: don't set EOP on pop or loop end

This appears to bad, compute shaders hang without it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/ssbo: refactor out buffer coord calcs and use for atomic path.

The atomic rat path has a bug in the ssbo path, refactor out the
address calcs from the load/store paths and reuse to fix the bug
in the buffer rat atomic path.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/ssbo: fix multi-dword buffer loads.

This fixes loading from different channels.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/ssbo: use r32ui format for ssbo resources.

This works best for returning the correct values and sizes in
tests.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: refactor out the immediate setup code.

This just refactors the same code out of the images/buffers paths.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/shader: fix ssbo atomic operations formats.

Don't try and use the image format for ssbo, just 32-bit uint.

Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/shader: fix thread id loading.

This just changes how thread id loading is done, it makes
smaller shaders if we don't use thread id gprs.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Android: enable noreturn and returns_nonnull attributes

Commit 94ca8e04adf6 ("spirv: Add vtn_fail and vtn_assert helpers") broke
Android builds which have -Werror enabled with the following errors:

external/mesa3d/src/compiler/spirv/spirv_to_nir.c:272:1: error: control may reach end of non-void function [-Werror,-Wreturn-type]
external/mesa3d/src/compiler/spirv/spirv_to_nir.c:810:1: error: control may reach end of non-void function [-Werror,-Wreturn-type]
...

The problem is the noreturn attribute is not enabled and we to define
HAVE_FUNC_ATTRIBUTE_NORETURN.

Auditing src/util/macros.h, we're also missing
HAVE_FUNC_ATTRIBUTE_RETURNS_NONNULL and HAVE_FUNC_ATTRIBUTE_WARN_UNUSED_RESULT,
so add them too.

Fixes: 94ca8e04adf6 ("spirv: Add vtn_fail and vtn_assert helpers")
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

gallium/u_upload_mgr: allow drivers to specify pipe_resource::flags

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

winsys/amdgpu: add RADEON_FLAG_READ_ONLY

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: remove RADEON_HEAP_VRAM_GTT

Only winsyses can set VRAM|GTT. Drivers shouldn't if they want to use
winsys allocators.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: move setting VRAM|GTT into winsyses

The combined VRAM|GTT heap will be removed.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: flush the context after resource_copy_region for buffer exports

Cc: 17.2 17.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

Android: gallium/radeon: fix libmesa_amd_common dependency

libmesa_amd_common static dependency is added in Android build
to avoid the following building errors:

In file included from external/mesa/src/gallium/drivers/radeon/r600_buffer_common.c:24:
In file included from external/mesa/src/gallium/drivers/radeonsi/si_pipe.h:26:
external/mesa/src/gallium/drivers/radeonsi/si_shader.h:138:10: fatal error: 'ac_binary.h' file not found
         ^~~~~~~~~~~~~
1 error generated.
...
In file included from external/mesa/src/gallium/drivers/radeon/r600_gpu_load.c:34:
In file included from external/mesa/src/gallium/drivers/radeonsi/si_pipe.h:26:
external/mesa/src/gallium/drivers/radeonsi/si_shader.h:138:10: fatal error: 'ac_binary.h' file not found
         ^~~~~~~~~~~~~
1 error generated.

Fixes: 950221f923 ("radeonsi: remove r600_common_screen")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/mesa: handle compute atomics

Just reuse the cs atomics bit and emit the hw atomic state.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/atomic: add cayman version of atomic save/restore from GDS (v2)

On Cayman we don't use the append/consume counters (fglrx doesn't)
and they don't seem to work well with compute shaders.

This just uses GDS instead to do the atomic operations.

v1.1: remove unused line.
v2: use EOS on cayman, it appears to work.

Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600/atomic: refactor out evergreen atomic setup/save code.

For cayman we want to use different code paths.

Signed-off-by: Dave Airlie <airlied@redhat.com>

radeonsi: pass llvm type directly to buffer_load()

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

meson: build gallium nine state_tracker

v2: - set d3d_drivers_path instead of dri_drivers_path
    - Fix nine guard to check for all relavent gallium drivers
    - Link with libswdri and libswkmsdri when necessary
    - Fix pkg-config generation
    - Add missing comma

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build gallium xa state tracker

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build gallium va state tracker

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build gallium omx state tracker

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build gallium xvmc state tracker

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: build gallium vdpau state tracker

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: drop gallium-media argument

This argument is the wrong approach for handling gallium media state
trackers, since it doesn't allow for an auto option. Instead we'll use
tristates, which do allow for auto.

This option has never been wired to anything anyway.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: extend install_megadrivers script to handle symmlinking

Which is required for the gallium media state trackers.

v2: - Make symlinks local instead of absolute

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: Add osmesa.sym script as a link dependency (gallium-osmesa)

v2: - Add this patch

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: use driver_deps for gallium osmesa

v2: - Put driver_swrast in the correct field (dependencies)
    - Remove unused osmesa_deps

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: Use driver dependencies for libgl-xlib target

v2: - put driver_swrast in the right field
    - add dep_threads (dep_llvm requires threads, so it masked this
      previously)

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: use the driver dependencies for the gallium dri target

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: define driver dependencies

This allow us to encapsulate the compiler and linkage requirements of
each driver in a reusable way. The result will be that each target that
needs a specific driver can simply add `driver_<name>` to its
dependencies line and the necessary libraries and compiler args will be
added. This will allow for a lot of code de-duplication between gallium
targets.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: sort gallium drivers after winsys

This is a requirement of the next patch. Since meson does not have
forward declarations, and we're going to define the driver dependencies
in the drivers folder they need to be after the winsys so that the
winsys libs are defined first.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: Combine gallium target subdirs

So that state trackers, targets, and special winsys requirements are all
in a single if statement. This is a cosmetic only cleanup with no
functional changes.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965/cnl: Avoid fast-clearing sRGB render buffers

Gen10 doesn't automatically decode the clear color of sRGB buffers. To
get correct rendering, avoid fast-clearing such buffers for now.

The driver now passes the following piglit tests:
* spec@arb_framebuffer_srgb@msaa-fast-clear
* spec@ext_texture_srgb@multisample-fast-clear gl_ext_texture_srgb

Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

meson: Fix overlinkage of dri3 loader

This was covering for underinkage elsewhere. With that fixed these can
be removed.

v2: - sort dependencies

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

meson: fix underlinkage without dri3

There are some case where the dri3 loader is covering for underlinkage
for GLX and EGL, provide the linkage that they actually need.

v2: - remove dep_xcb_dri3 from glx. This was an oversight in v1 and is
      not needed.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

meson: Reformat glx code to match more common style

Generally in our meson build large arrays are formated in the form:
[
  ..., ..., ..., $
  ...,
]

So use that form

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

radv: fix a crash in radv_can_dump_shader()

module can be NULL, oops.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

intel/isl: Declare private array as static const

It's array isl_drm.c:modifier_info[] .

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

meson: Install dri.pc file when building gallium dri drivers

Currently this pkg-config file is only installed if a classic dri driver
is built. This is wrong, it should be installed if any dri driver is
installed, which includes the gallium dri target.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

anv: query CS timestamp frequency from the kernel

The reference value in gen_device_info isn't going to be acurate on
Gen10+. We should query it from the kernel, which reads a couple of
register to compute the actual value.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

i965: read CS timestamp frequency from the kernel on Gen10+

We cannot figure this value out of the PCI-id anymore. Let's read it
from the kernel (which computes this from a few registers).

When running on a (upcoming) 4.16-rc1+ kernel, this will fixes piglit
tests on CNL :

    spec@arb_timer_query@query gl_timestamp
    spec@arb_timer_query@timestamp-get
    spec@ext_timer_query@time-elapsed

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

drm-uapi: Update drm/i915 headers from drm-next

Taken from drm-next ca797d29cd63e7b71b4eea29aff3b1cefd1ecb59

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

radv: Implement VK_KHR_get_surface_capabilities2

The WSI core code does all the hard work.  Just add the wrappers and
turn it on.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Initialize individual WSI interfaces in wsi_device_init

Now that we have anv_device_init/finish functions, there's no reason to
have the individual driver do any more work than that.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Drop some unneeded cruft from the API

This drops the unneeded callbacks struct as well as the queue_get_family
callback we were using before we'd pulled QueuePresent inside.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add wrappers for all of the surface queries

This lets us move wsi_interface to wsi_common_private.h

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Drop the can_handle_different_gpu parameter from get_support

Both anv and radv can handle prime now.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Move wsi_swapchain to wsi_common_private.h

The drivers no longer poke at this directly.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add a helper for AcquireNextImage

Unfortunately, due to the fact that AcquireNextImage does not take a
queue, the ANV trick for triggering the fence won't work in general.  We
leave dealing with the fence up to the caller for now.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: move swapchain create/destroy to common code

v2 (Jason Ekstrand):
 - Rebase
 - Alter the names of the helpers to better match the vulkan entrypoints
 - Use the helpers in anv

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Move prime blitting into queue_present

This lets us save a QueueSubmit and it also makes prime a lot less
X11-specific.  Also, it means we can only wait on the semaphores once
instead of on every blit.

Reviewed-by: Dave Airlie <airlied@redhat.com>

vulkan/wsi: Move get_images into common code

This moves bits out of all four corners (anv, radv, x11, wayland) and
into the wsi common code.  We also switch to using an outarray to ensure
we get our return code right.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv/wsi: Enable prime support

Now that we're using the same common code as radv, we get prime support
for free.  Just enable it.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv/wsi: Use the common QueuePresent code

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Set a proper pWaitDstStageMask on the dummy submit

Neither mesa driver really cares, but we should set it none the less for
the sake of correctness.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Only wait on semaphores on the first swapchain

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Refactor result handling in queue_present

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv/wsi: Move the guts of QueuePresent to wsi common

v2 (Jason Ekstrand):
 - Better comit message
 - Rebase
 - Re-indent to follow wsi_common style
 - Drop the unneeded _swapchain from the newly added helper
 - Make the clone more true to the original (as per the rebase)

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add a WSI_FROM_HANDLE macro

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv/wsi: drop allocate memory special case

Just check if image has scanout flag set

v2 (Jason Ekstrand):
 - Rebase
 - Also drop the now unused radv_mem_flag_bits enum

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Do image creation in common code

This uses the mock extension created in a previous commit to tell the
driver that the image it's just been asked to create is, in fact, a
window system image with whatever assumptions that implies.  There was a
lot of redundant code between the two drivers to do basically exactly
the same thing.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Implement prime in a completely generic way

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv: Move wsi initialization later in physical_device_init

We need it to happen after memory type setup so that we can query memory
types in wsi_device_init.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv/image: Implement the wsi "extension"

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv/image: Implement the wsi "extension"

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv: Require a dedicated allocation for modified images

This lets us set the BO tiling when we allocate the memory.  This is
required for GL to work properly.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv/image: Add a drm_format_mod field

At the moment, this is always initialized to DRM_FORMAT_MOD_INVALID.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

radv: Implement VK_EXT_external_memory_dma_buf

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

anv: Implement VK_EXT_external_memory_dma_buf

This is a modified version of the patch originally sent by Chad Versace.
The primary difference is that this version claims that OPQAUE_FD and
DMA_BUF are compatible handle types.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add a mock image creation extension

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add wsi_swapchain_init/finish functions

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi: Add a wsi_device_init function

This gives the opportunity to collect some function pointers if we'd
like which will be very useful in future.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan/wsi/x11: Handle the geometry check earlier in create_swapchain

This fixes a potential leak if allocating the swapchain fails.  Since
geometry checking and bit-depth fetching is self-contained, it makes
sense to just do it first so we can delete the geometry reply.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>