iris: Enable non coherent framebuffer fetch on broadwell

v2: Use GEN_GEN in iris_state (Kenneth Graunke)

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Free resource if failed to allocate surface state

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Pass isl_surf to fill_surface_state

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Add infrastructure to support non coherent framebuffer fetch

Create separate SURFACE_STATE for render target read in order to support
non coherent framebuffer fetch on broadwell.

Also we need to resolve framebuffer in order to support CCS_D.

v2: Add outputs_read check (Kenneth Graunke)

v3: 1) Import Curro's comment from get_isl_surf
    2) Rename get_isl_surf method
    3) Clean up allocation in case of failure

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Add helper functions to get tile offset

All helper functions are ported from i965 driver.

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Add helper function to get isl dim layout

v2: Add missing space (Caio)

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Add render target read entry in binding table

This will be used in next patches for supporting non coherent
framebuffer fetch on Broadwell.

v2: Fix comment (Kenneth Graunke)

v3: 1) Fix a few nits (Caio)
    2) Add comment (Caio)

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

build: Bump C++ standard requirement to C++14 to fix FTBFS with LLVM 10

When building Mesa against a recent LLVM 10 with C++11, the build fails
if the AMD common code is built as well due to "std::index_sequence"
being undeclared.

LLVM requires a minimum of C++14.

Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Acked-by: Eric Engestrom <eric@engestrom.ch>

panfrost: Add madvise support to BO cache

The kernel now supports madvise ioctl to indicate which BOs can be freed
when there is memory pressure. Mark BOs purgeable when they are in the
BO cache. The BOs must also be munmapped when they are in the cache or
they cannot be purged.

We could optimize avoiding the madvise ioctl on older kernels once the
driver version bump lands, but probably not worth it given the other
driver features also being added.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

panfrost: Sync UAPI header from kernel

Sync the panfrost_drm.h UAPI header with the latest from the kernel.
This adds madvise ioctl and GPU feature params.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

mesa: add ext_dsa GetMultiTexLevelParameterEXT

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glCompressedMultiTex* functions display list support

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glCompressedMultiTex* functions

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glCompressedTex* functions display list support

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add EXT_dsa glCompressedTexture(Sub)Image1D/2D/3D functions

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: refactor compressed_tex_sub_image function

Combine compressed_tex_sub_image, compressed_tex_sub_image_error and
compressed_tex_sub_image_no_error in a single function.

The added "enum tex_mode mode" parameter allows to implement the
DSA / non-DSA variants and their error/no_error combination.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv: Add Renoir support.

Took the freedom to enable dfsm even though I don't have benchmark
results yet, but it seems Raven-like.

Rest is from radeonsi.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/nir: always lower ballot masks as 64-bit, codegen handles it

This fixes KHR-GL45.shader_ballot_tests.ShaderBallotBitmasks.

This solution is better, because the IR isn't dependent on wave32.

radeonsi: remove the unsafemath debug option

unlikely to be used in the future

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/nir: fix counting shader inputs & outputs

radeonsi/nir: fix assertion in si_nir_load_sampler_desc

radeonsi: clean up si_llvm_context_set_tgsi

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: allocate and resize global_buffers as needed

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: don't set PA_SC_TILE_STEERING_OVERRIDE if CLEAR_STATE sets it

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: don't emit PKT3_CONTEXT_CONTROL on amdgpu

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: fix an assertion failure: assert(!res->b.is_shared)

This only appears to happen on Raven2.

Possible way to reproduce:

resource_get_handle(WINSYS_HANDLE_TYPE_KMS) --> sets is_shared = true
resource_get_handle(WINSYS_HANDLE_TYPE_DMABUF) --> fail

Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org>

radeonsi: handle the use_ngg_streamout flag in si_update_ngg

radeonsi: move the tess factor ring size assertion to a place where it matters

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac/nir: set image=true when loading FMASK for images

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

etnaviv: rs: add support for 64bpp clears

Starting with HALTI2 the RS supports 64bpp clears.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>

etnaviv: update headers from rnndb

Update to etna_viv commit c51353e.

Signed-off-by: Christian GMEINER <christian.GMEINER@bachmann.info>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>

swrast: Make the fetch funcs table sparse.

This shrinks the table, avoids needing to update the table with NULL
entries on every MESA_FORMAT addition, and removes a surprising,
non-unit-tested format number ordering dependency.

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

gallium: Remove manual defining of PIPE_FORMAT enum values.

Now that SVGA doesn't have a table that has to be in PIPE_FORMAT
order, we can let the enums have whatever values they naturally would
without worrying about holes.

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: Drop unsupported formats from the format table.

Now that we're using the array initializers, we don't need to manually
fill out all these stub entries.

Produced with "sed -i '/.*INVALID.*INVALID.*INVALID/d'
src/gallium/drivers/svga/svga_format.c"

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: Remove duplication in the format table.

By using the [ ] = {} array initializer syntax, we no longer need the
entries to be listed in PIPE_FORMAT_* value order.  This means that
people adding new gallium formats don't need to cargo-cult changes to
this driver or regress that non-unit-tested requirement.

While I'm here, drop the lines for formats that no longer exist (the
numbered ones in the table).

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

svga: Factor out the format conversion table entry lookup.

Seemed like a sensible cleanup, while I was looking at whether I could
make the table sparse.

To make the svga table not require fixups on every new gallium format,
we may want to change how it's populated.

Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>

nir: Add more source types to nir_tex_instr_src_type

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Compute liveness per-block

Rather than using a regalloc based on live internals, computed hastily
with repeated invocations of a forward-analysis pass, we switch to
compute liveness information on a per-block basis.

Within a given basic block, we compute liveness backwards with a
linear-time algorithm; for common shaders, this may help RA terminate
quicker.

Across blocks, we use a work list (really a work set) and check if we're
making progress. This isn't terribly efficient, but it gets the job
done. Point is, we get the live_in/live_out for each block.

From there, it's simple to rerun the linear-time update algorithm to
compute the interference graph.

The benefit of this technique is the ability to ignore "gaps" in
liveness across intermediate blocks that are never executed. On simple
shaders like the loops in glmark, this results in a minor reduction in
register pressure. The motivation was a complex shader in Krita that
failed register allocation due to an unfortunate interaction between
texture pipeline registers and control flow. This shader now compiles
successfully.

total instructions in shared programs: 3439 -> 3438 (-0.03%)
instructions in affected programs: 22 -> 21 (-4.55%)
helped: 1
HURT: 0

total bundles in shared programs: 2077 -> 2076 (-0.05%)
bundles in affected programs: 12 -> 11 (-8.33%)
helped: 1
HURT: 0

total quadwords in shared programs: 3457 -> 3456 (-0.03%)
quadwords in affected programs: 20 -> 19 (-5.00%)
helped: 1
HURT: 0

total registers in shared programs: 341 -> 338 (-0.88%)
registers in affected programs: 9 -> 6 (-33.33%)
helped: 3
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 33.33% max: 33.33% x̄: 33.33% x̃: 33.33%

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Analyze load/store for swizzle propagation

If there's a nontrivial swizzle fed into an extra (shortened) argument,
we bail on copyprop. No glmark changes (since it doesn't use fancy
texturing/loads).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Treat cubemaps "stores" as loads

It's always been ambiguous which they are, but their primary register is
their output, not their input; therefore, they are loads.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Clamp cubemap swizzle to XYXX

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Clamp st_vary swizzle by number of components

Same issue with liveness analysis. If we store out a vec3, we should not
reference the .w component.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Use type-appropriate swizzle for texture coordinate

The texture coordinate for a 2D texture could be a vec2 or a vec3,
depending if it's an array texture or not. If it's vec2 (non-array
texture), we should not reference the z component; otherwise, liveness
analysis will get very confused when z is never written.

v2: Fix typo (Ilia).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Set mask for lowered read-hazard moves

If we need to lower a move for a read from a vec2 texture coordinate, we
shouldn't write zw, even incidentally.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Fix texw lowering with complex control flow

Fixes shaders with control flow like:

   out = 0;

   if (A) {
      if (B)
         out = texture(A, ...)
   } else {
      out = texture(B, ...)
   }

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_rewrite_index_dst_single helper

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Print predecessors in MIR

Just as a sanity check.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Index blocks for printing

Better than having pointers flying about.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_foreach_src

This is repeated often enough.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_foreach_instr_in_block_rev

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_foreach_successor helper

Now we should be able to walk the control-flow graph naturally.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_foreach_predecessor utility

It's ugly, but c'est la vie.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Link exit block

The exit block has been 'dangling' in the successors graph, so let's
ensure it's linked in.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_exit_block helper

The exit block is gauranteed to be empty, signaling the end of the
program.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Maintain block predecessor set

While we already compute the successors array, for backwards data flow
analysis, it is useful to walk the control flow graph backwards based on
predecessors, so let's compute that information as well.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Use ralloc on ctx/blocks

This will allow us to get some level of automatic memory management.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Shrink successors[] to 2 length

A block can't have more.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

nir: Add missing dependency in Android.nir.gen.mk

Fixes incremental build with Android

Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

meson: build lima tools as part of 'all' tools

This is primarily so that this build gets tested in CI and we don't
break it again.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

ac/nir: Fix store_scratch with a non-full writemask

By adding one more helper to ac_llvm_build, we can also easily keep
vector stores together.

Fixes the
tests/spec/glsl-1.30/execution/fs-large-local-array-vec4.shader_test
piglit test.

Fixes: 74470baebbd ("ac/nir: Lower large indirect variables to scratch")
Reviewed-by: Marek Olšák <marek.olsak@amd.com

glsl/standalone: init shader stage in init_gl_program()

Otherwise lima standalone compiler fails when trying to compile fragment
shader with:

lima_compiler: ../src/compiler/nir/nir.c:55: nir_shader_create: Assertion `si->stage == stage' failed

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

iris: Only request an input mask if the shader needs it

Fixes: aebca3961b "iris: Fix handling of SIMD32 fragment shaders"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium: add back YVU support

PIPE_FORMAT_YV12 is not handled so switching to PIPE_FORMAT_IYUV and
adding back YVU support.

Signed-off-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

lima: actually wait for bo in lima_bo_wait

PIPE_TIMEOUT_INFINITE is unsigned and gets assigned to signed fields
where it ends up as -1. When this reaches the kernel as a timeout it
gets translated as no timeout, which cause the waiting functions to
return immediately and not actually wait for a completion.

This seems to cause unstable results with lima where even piglit tests
randomly fail.

Handle this by setting the signed max value in case of infinite timeout.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

nir/algebraic: add a few masking-before-unpack optimizations

Helps some Dawn of War 3 and F1 2017 shaders with ACO:
Totals from affected shaders:
SGPRS: 2136 -> 2128 (-0.37 %)
VGPRS: 1624 -> 1628 (0.25 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 168068 -> 164332 (-2.22 %) bytes
LDS: 44 -> 44 (0.00 %) blocks
Max Waves: 222 -> 221 (-0.45 %)
Wait states: 0 -> 0 (0.00 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

lima: fix compilation of standalone compiler

Fixes: e0aeee946004("lima: add summary report for shader-db")
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

Revert "radv/gfx10: Enable DCC for storage images."

Quite useless without DCC for LAYOUT_GENERAL.

Fixes: b4dad3afaa0 Revert "radv: Do not decompress on LAYOUT_GENERAL."
Acked-by: Dave Airlie <airlied@redhat.com>

Revert "radv: Do not decompress on LAYOUT_GENERAL."

Causes issues with a bunch of games with DXVK.

Fixes: 50add1b33ae "radv: Do not decompress on LAYOUT_GENERAL."
Acked-by: Dave Airlie <airlied@redhat.com>

mesa: add support for CET to x86/x86-64 asm files.

Control-flow enforcement technology is a new instructions on x86
processors to denote where indirect jumps can land. Gcc auto adds
the instruction (which encodes as a NOP on older CPUs) to entrypoints
but assembler files need manual adding. This adds it to all the
entry points in the mesa x86/x86-64 assembler files.

This will only happen if mesa is built with the -fcf-protection flag
to gcc as some distros are wanting to do.

Acked-by: Eric Anholt <eric@anholt.net>

pan/bifrost: Manually constant fold register class

Fixes errors for some people building Mesa:

../src/panfrost/bifrost/bifrost_sched.c:32:31: error: initializer
element is not constant
 const unsigned max_vec2_reg = max_primary_reg / 2;

../src/panfrost/bifrost/bifrost_sched.c:33:31: error: initializer
element is not constant
 const unsigned max_vec3_reg = max_primary_reg / 4; // XXX: Do we need
to align vec3 to vec4 boundary?

../src/panfrost/bifrost/bifrost_sched.c:34:31: error: initializer
element is not constant
 const unsigned max_vec4_reg = max_primary_reg / 4;

../src/panfrost/bifrost/bifrost_sched.c:35:32: error: initializer
element is not constant
 const unsigned max_registers = max_primary_reg +

../src/panfrost/bifrost/bifrost_sched.c:40:28: error: initializer
element is not constant
 const unsigned vec2_base = primary_base + max_primary_reg;

../src/panfrost/bifrost/bifrost_sched.c:41:28: error: initializer
element is not constant
 const unsigned vec3_base = vec2_base + max_vec2_reg;

../src/panfrost/bifrost/bifrost_sched.c:42:28: error: initializer
element is not constant
 const unsigned vec4_base = vec3_base + max_vec3_reg;

../src/panfrost/bifrost/bifrost_sched.c:43:27: error: initializer
element is not constant
 const unsigned vec4_end = vec4_base + max_vec4_reg;

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

gallium/util: widen type before multiplication

This method returns size_t, but the multiplication multiplies two
integers, leading to overflow rather than type widening.

Noticed by compiling with MSVC, which emits a warning.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: avoid warning on Windows

On Windows, p_atomic_inc_return returns an unsigned long long rather
than the type the pointer refers to, so let's make sure we cast the
result to the right type. Otherwise, we'll trigger a warning about
the wrong format-string for the type.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

win32: unify strcasecmp definitions

There was two incompatible definitions of strcasecmp, which lead to a
compiler warning. Let's clean this up by only leaving one of them, and
using that one all the time.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa/main: avoid warning when casting offset to pointer

This generates a warning on some 64-bit systems, so let's cast to a
properly sized integer first.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

nir: avoid warning when casting bogus pointer

This intentionally-bogus pointer generates a warning on some 64-bit
systems, so let's cast to a properly-sized integer first.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: fixup u64-warning

Similarly to the unsigned-version, we need to first cast the result to a
suiting integer before negating the number, otherwise we'll trigger a
warning.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

isl: Enable Unorm Path in Color Pipe

Improves performance on my Icelake 8x8 locked to 700Mhz.  For example,
some GfxBench5 subtests have the following results:

- [i965] gl_manhattan: ................ 7.01119% +/- 0.180971% (n=5)
- [i965] gl_4 (Car Chase):              4.24351% +/- 0.175622% (n=5)
- [i965] gl_blending:  ................ 3.36327% +/- 0.180267% (n=5)
- [i965] gl_5_normal (Aztec Ruins):     1.67962% +/- 0.243534% (n=10)
- [iris] gl_manhattan: ................ 3.92357% +/- 0.073965% (n=25)
- [iris] gl_4 (Car Chase):              2.17746% +/- 0.0826858% (n=5)
- [iris] gl_blending:  ................ 2.79599% +/- 0.803652% (n=15)
- [iris] gl_5_normal (Aztec Ruins):     1.30930% +/- 0.106523% (n=25)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv: Properly initialize device->slice_hash.

When subslices_delta == 0 and we take the early return,
device->slice_hash is not initialized on GEN11. It then causes a
segfault when going through anv_DestroyDevice, if compiled with
valgrind.

Fixes: 7bc022b4bbc ("anv/gen11: Emit SLICE_HASH_TABLE when pipes are
                    unbalanced.)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/compiler: Fix resource leak in error path

CID: 1452261

Fixes: 04a99515 "intel/compiler: add ability to override shader's assembly"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

panfrost: Implement native RECT textures

We started honouring the normalized_coords flag in the texture
descriptor, but a bisection revealed that broke RECT textures -- since
we were *also* lowering them in the shader. So just remove the
shader-based lowering, use native RECT textures, and enjoy the nominal
reduction in complexity and performance boost.

Fixes: 3e47a1181b7 ("panfrost: Add MALI_SAMP_NORM_COORDS flag")
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Add R10G10B10A2_SSCALED vertex format

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Disassemble UBO index explicitly

It's a bit of a special case but that's fine.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Account for unaligned UBOs when promoting uniforms

We only know how to promote aligned accesses, although theoretically we
should be able to promote unaligned to swizzles in the future. Check
this.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add mir_ubo_shift helper

Different UBO reads have different shift requirements.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Address emit_ubo_read offset in bytes

We'll want to be smarter about unaligned reads, so let's get this code
all in one place.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Wire writemask into UBO reads

Helps the disassembly be clearer and maybe regalloc be smarter.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Identify UBO/SSBO op symmetry

It's the same thing, just shifted.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Extend blending to MRT

Our hardware supports independent (per-RT) blending, but we need to
route those settings through from Gallium.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Emit store_output branch just-in-time

We'll need multiple branches for MRT, so we can't defer. Also, we need
to track dependencies to ensure r0 is set to the correct value for each
store_output.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/midgard: Add dont_eliminate flag

We need to treat fragment writes specially.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/mfbd: Stuff in RT count

Fixes DATA_INVALID_FAULTs with multiple render targets.

We do always allocate space for 4 cbufs just to keep things sane. This
may not be strictly necessary.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/decode: Dump FBD tagged pointer

Turns out the rt count is stuffed in here..

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/decode: Decode invalid access type upon fault

We don't have a good way to confirm this, but it parallels the kernel
definitons for MMU faults nicely.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/decode: Fix duplicate heap_end property

This was supposed to read heap_start. It's the same value but still,
better get this right.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Note "MFBD preload disable" bit

It's a chicken bit, as far as I can tell. Buck buck.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/bifrost: Link in compiler

We enable the standalone compiler, build the new files, and let it
blast.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/bifrost: Check in remainder of the Bifrost compiler

What it says on the tin.

Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/bifrost: Add bifrost_print.c/h

IR printers.

Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/bifrost: Style format the disassembler

   $ astyle *.c *.h --style=linux -s8

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

pan/bifrost: Stub out standalone compiler

We don't actually have a standalone compiler in-tree yet, but let's get
prepared for when we do.

Signed-off-by: Ryan Houdek <Sonicadvance1@gmail.com>
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>