lima: add support for depth/stencil fbo attachments and textures

Hardware supports writing back Z/S buffers and sampling from them,
so add support for that.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Icenowy Zheng <icenowy@aosc.io>

lima: use individual tile heap for each GP job.

Looks like it's somehow used by subsequent PP job, so we have to
preserve its contents until PP job is done.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Icenowy Zheng <icenowy@aosc.io>

nir: add lower_ftrunc

Port TGSI TRUNC lowering to nir

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

android: fix LLVM version string related building errors

Adding \ prior to " in llvm version string fixes the following building errors:

external/mesa/src/gallium/drivers/r600/r600_pipe_common.c:1290:14:
error: expected ')'
                 ", LLVM " MESA_LLVM_VERSION_STRING
                           ^
<command line>:8:34: note: expanded from here
                                 ^
external/mesa/src/gallium/drivers/r600/r600_pipe_common.c:1287:10:
note: to match this '('
        snprintf(rscreen->renderer_string, sizeof(rscreen->renderer_string),
                ^
1 error generated.

Fixes: 05b114e ("simplify LLVM version string printing")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>

anv: leave the top 4Gb of the high heap VMA unused

In 628c9ca9089789 I forgot to apply the same -4Gb of the high address
of the high heap VMA. This was previously computed in the
HIGH_HEAP_MAX_ADDRESS.

Many thanks to James for pointing this out.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Xiong, James <james.xiong@intel.com>
Fixes: 628c9ca9089789 ("anv: store heap address bounds when initializing physical device")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

v3d: Use the new lower_to_scratch implementation for indirects on temps.

We can use the same register spilling infrastructure for our loads/stores
of indirect access of temp variables, instead of doing an if ladder.

Cuts 50% of instructions and max-temps from 2 KSP shaders in shader-db.
Also causes several other KSP shaders with large bodies and large loop
counts to not be force-unrolled.

The change was originally motivated by NOLTIS slightly modifying register
pressure in piglit temp mat4 array read/write tests, triggering register
allocation failures.

nir: Add a pass for selectively lowering variables to scratch space

This commit adds new nir_load/store_scratch opcodes which read and write
a virtual scratch space.  It's up to the back-end to figure out what to
do with it and where to put the actual scratch data.

v2: Drop const_index comments (by anholt)

Reviewed-by: Eric Anholt <eric@anholt.net>

v3d: Detect the correct number of QPUs and use it to fix the spill size.

We were missing a * 4 even if the particular hardware matched our
assumption.

v3d: Add missing dumping for the spill offset/size uniforms.

v3d: Add missing base offset to CS shared memory accesses.

This code is so touchy, trying to emit the minimum amount of address math.
Some day we'll move it all to NIR, I hope.

v3d: Add Compute Shader compilation support.

While waiting for the CSD UABI to get reviewed, I keep having to rebase
the CS patch.  Just land the compiler side for now to keep it from
diverging.

For now this covers just GLES 3.1 compute shaders, not CL kernels.

v3d: Replace the old shader-db env var output with the ARB_debug_output.

We're using ARB_debug_output for the main shader-db, but I had this env
var left around from the shader-db-2 support (vc4 apitrace-based).  Keep
the env var around since it's nice sometimes to get the stats on a shader
you're optimizing without having to do a shader-db run, but drop the old
formatting that's not useful and keeps tricking me when I go to add
another measurement to the shader-db output.

v3d: Include the number of max temps used in the shader-db output.

This gives us finer-grained feedback on how we're doing on register
pressure than "did we trigger a new shader to spill or drop thread count?"

v3d: Drop a note for the future about PIPE_CAP_PACKED_UNIFORMS.

v3d: Add and use a define for the number of channels in a QPU invocation.

A shader invocation always executes 16 channels together, so we often end
up multiplying things by this magic 16 number.  Give it a name.

nir: Add a comment about how intrinsic definitions work.

I was thinking about a refactor, and needed to read this first.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Drop remaining references to const_index in favor of the call to use.

Please don't make me read a const_index[] expression ever again.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Drop comments about the constant_index slots for load/stores.

The constant_index slots are named right there in the intrinsic
definition, and the comment is just a chance to get out of sync.  Noticed
while reviewing the lower_to_scratch changes that copy-and-pasted wrong
comments, and load_ubo and load_per_vertex_output had incorrect comments
currently.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/fs: Remove unused condition from opt_algebraic case

We will never hit a condition where we have src1 and src2 as immediate
operands.

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

glsl: Set location on structure-split sampler uniform variables

gl_nir_lower_samplers_as_deref splits structure uniform variables,
creating new variables for individual fields.  As part of that, it
calculates a new location.  It then never set this on the new variables.

Thanks to Michael Fiano for finding this bug.  Fixes crashes on i965
with Piglit's new tests/spec/glsl-1.10/execution/samplers/uniform-struct
test, which was reduced from the failing case in Michael's app.

Fixes: f003859f97c nir: Make gl_nir_lower_samplers use gl_nir_lower_samplers_as_deref
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

panfrost: use os_mmap and os_munmap

32-bit needs mmap64 for 64-bit offsets. We get 64-bit offsets from kernel.

Signed-off-by: Mateusz Krzak <kszaquitto@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: cast bo_handles pointer to uintptr_t first

Required for 64-bit kernel to interpret the pointer from 32-bit userspace.

Signed-off-by: Mateusz Krzak <kszaquitto@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

anv/pipeline: Fix MEDIA_VFE_STATE::PerThreadScratchSpace on gen7

We were always programming it with the Broadwell convention which is too
large by a factor of two on Haswell and just plain wrong on IVB and BYT.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org

gitlab-ci: add lima to the build

Suggested-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>

ac: use the common helper ac_apply_fmask_to_sample

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi: set AC_FUNC_ATTR_READNONE for image opcodes where it was missing

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa: don't overwrite existing shader files with MESA_SHADER_CAPTURE_PATH

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: allow the #extension directive within code blocks for the dri option

for Viewperf 13

Acked-by: Timothy Arceri <tarceri@itsqueeze.com>

ac/nir: remove some useless integer casts for ALU operations

Sources are always casted to integers.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: remove useless integer cast in visit_image_load()

ac_build_image_opcode() casts if necessary and buffer images
are casted too.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: remove useless integer cast in adjust_sample_index_using_fmask()

It's already casted if necessary in ac_build_image_opcode().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: remove useles LLVMGetUndef for nir_op_pack_64_2x32_split

Trivial.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: add ac_build_load_helper_invocation() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: add ac_build_ddxy_interp() helper

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: add ac_build_umax() and use it where possible

This changes the predicate from LessThan to Equal.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: make use of ac_build_umin() where possible

This changes the predicate from LessThan to Equal.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: make use of ac_build_imin() where possible

This changes the predicate from LessThan to Equal.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir: make use of ac_build_imax() where possible

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

lima: add bool parameter to type_size function

Fixes: 035759b61ba1778d5143cdf3a8795a62dd5d8a60
       ("nir/i965/freedreno/vc4: add a bindless bool to type size functions")

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

nvc0/nir: enable bindless texture

Signed-off-by: Karol Herbst <kherbst@redhat.com>

nv50/ir/nir: add support for bindless images

Signed-off-by: Karol Herbst <kherbst@redhat.com>

nv50/ir/nir: handle bindless texture

Signed-off-by: Karol Herbst <kherbst@redhat.com>

ac/nir_to_llvm: add image bindless support

With this all piglit bindless image tests pass on radeonsi.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/nir_to_llvm: make get_sampler_desc() more generic and pass it the image intrinsic

This will be required by the bindless support in the following patches.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl/nir: add support for lowering bindless images_derefs

v2: handle atomics as well
    make use of nir_rewrite_image_intrinsic
v3: remove call to nir_remove_dead_derefs
v4: (Timothy Arceri) dont actually call lowering yet

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v3)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl/nir: fetch the type for images from the deref instruction

fixes retrieving the sampler type for bindless images stored inside structs.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl_to_nir: handle bindless textures

v2: add support for AMD

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

nir/i965/freedreno/vc4: add a bindless bool to type size functions

This required to calculate sizes correctly when we have bindless
samplers/images.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

nir: move brw_nir_rewrite_image_intrinsic into common code

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

lima: lower bool to float when building shaders

Both processors of Mali Utgard are float-only, so bool are not
acceptable data type of them. Fortunately the NIR compiler
infrastructure has a lower pass to lower bool to float.

Call this lower pass to lower bool to float for both GP and PP. This
makes Glamor on Xorg server 1.20.3 at least doesn't hang when starting
gtk3-demo.

The old map of nir op bcsel is changed to fcsel, and the map of b2f32 in
PP is dropped because it's not needed now (it's originally only mapped
to ppir_op_mov).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

panfrost: Guard against reading past end of buffer

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: split asserts in pandecode

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

llvmpipe: fix undefined shift 1 << 31.

Pointed out by coverity.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

swrast: fix undefined shift of 1 << 31

Pointed out by coverity

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

draw: fix undefined shift of (1 << 31)

Pointed out by a coverity scan.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

iris: Actually pin the scratch BO.

We were pinning it for compute shaders, and pinning it when restoring
saved buffers, but we never actually pinned it in the original batch
for VS/TCS/TES/GS/FS.

Fixes rendering in GFXBench5's Tessellation demo and a bunch of Piglit
geometry shader tests.

anv: store heap address bounds when initializing physical device

We can then reuse those bounds to initialize the VMA heaps at logical
device creation.

This fixes an issue on EHL which has only 36bits of VMA. We were
incorrectly using the fixed 48bits upper bound to initialize the
logical device heap, resulting in addresses beyong the device's
limits.

v2: Don't confuse heap size (limited by system memory) and VMA size
   (limited by number of addressing bits the platform has)

v3: Fix low heap vma_size :( (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)

intel/common: Support bigger right-shifts with mi_builder

Because why not?

anv/cmd_buffer: Use gen_mi_sub instead of gen_mi_add with a negative

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Move mi_memcpy and mi_memset to gen_mi_builder

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for queries

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for conditional rendering

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for indirect dispatch

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for indirect draw parameters

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for computing resolve predicates

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use gen_mi_builder for CmdDrawIndirectByteCount

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/common: Add unit tests for gen_mi_builder

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/common: Add a MI command builder

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

v3d: Add an optimization pass for redundant flags updates.

Our exec masking introduces lots of redundant flags updates, and even
without that there will be cases where NIR comparisons on the same sources
for different reasons may generate the same comparison instruction before
the selection.

total instructions in shared programs: 6492930 -> 6460934 (-0.49%)
total uniforms in shared programs: 2117460 -> 2115106 (-0.11%)
total spills in shared programs: 4983 -> 4987 (0.08%)
total fills in shared programs: 6408 -> 6416 (0.12%)

kmsro: Extend to include armada-drm

This allows using the Marvell Armada display controllers (with the
armada drm modesetting driver) along with the render-only drivers,
such as Etnaviv on an OLPC XO-1.75 laptop.

v2:
- Add to Android.mk too

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Eric Anholt <eric@anholt.net>

lima: implement blit with util_blitter

As we have already prepared for using util_blitter, use it to implement
lima_blit.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

lima: make lima_context_framebuffer subtype of pipe_framebuffer_state

Currently the lima driver saves the framebuffer state in its
from-scratch struct lima_context_framebuffer. However, util_blitter
requires to save framebuffer with standard struct
pipe_framebuffer_state.

Make the lima_context_framebuffer a subtype of the standard
pipe_framebuffer_state, thus the standard part can be used for
util_blitter framebuffer state saving.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

lima: add dummy set_sample_mask function

The set_sample_mask function is required in util_blitter.

Add a dummy one to make util_blitter work.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>

gitlab-ci: build gallium extra hud

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>

meson: remove meson-created megadrivers symlinks

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110356
Fixes: aa7afe324c2092fb31f9 "meson: strip rpath from megadrivers"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>

nir: initialise some variables in opt_if_loop_last_continue()

Fixes a couple of Coverity warnings CID 1444626.

Fixes: e30804c6024f ("nir/radv: remove restrictions on opt_if_loop_last_continue()")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

nir/xfb: do not use bare interface type

In commit 3b3653c4cfb we decided not to use bare types; hence do not use
bare type when comparing with interface type to find out if the xfb
variable is an array block.

This fixes dEQP-VK.transform_feedback.* tests.

Fixes: 3b3653c4cfb ("nir/spirv: don't use bare types, remove assert in
                     split vars for testing")
CC: Dave Airlie <airlied@redhat.com>
CC: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

gitlab-ci: Run CI pipeline for all branches in the main repository

In turn, do not run the pipeline for the master branch in forked
repositories.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

virgl: use debug_printf instead of fprintf

While we're at it, prefix the string with "VIRGL: ", to match similar
code elsewhere in virgl.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: do not warn about display-target binding

We never want to display a transfer-temp surface, so let's ignore that
flag when calculating the new binding flags.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: only warn about unchecked flags

The other flags are already vetted, so there's no point in reporting
them.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: unsigned int -> unsigned

We don't usually spell out the int part of unsigned.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

egl: setup fds array correctly when exporting dmabuf

For formats with multiple planes, application will pass a num_planes
sized fds array which should be initialized properly in case fds amount
utilized by the driver is less than the number of planes.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

docs: update calendar, and news item and link release notes for 19.0.2

docs: Add sha256 sums for 19.0.2

docs: Add release notes for 19.0.2

gallium/aux: Report error if loading of a pipe driver fails.

Skip over non-existent files.
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

kmsro: Add platform support for exynos and sun4i

v2:
- add Android.mk change

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>

kmsro: Add lima renderonly support

Enable using lima for KMS renderonly. This still needs KMS driver
name mapping to kmsro to be used automatically.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>

gallium: add lima driver

v2:
- use renamed util_dynarray_grow_cap
- use DEBUG_GET_ONCE_FLAGS_OPTION for debug flags
- remove DRM_FORMAT_MOD_ARM_AGTB_MODE0 usage
- compute min/max index in driver

v3:
- fix plbu framebuffer state calculation
- fix color_16pc assemble
- use nir_lower_all_source_mods for lowering neg/abs/sat
- use float arrary for static GPU data
- add disassemble comment for static shader code
- use drm_find_modifier

v4:
- use lima_nir_lower_uniform_to_scalar

v5:
- remove nir_opt_global_to_local when rebase

Cc: Rob Clark <robdclark@gmail.com>
Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Arno Messiaen <arnomessiaen@gmail.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: marmeladema <xademax@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rohan Garg <rohan@garg.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>

drm-uapi: add lima_drm.h

Acked-by: Eric Anholt <eric@anholt.net>
Signed-of-by: Qiang Yu <yuq825@gmail.com>

gallium/u_vbuf: export u_vbuf_get_minmax_index

This helper function can be used by driver which
always need min/max index.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Qiang Yu <yuq825@gmail.com>

u_dynarray: add util_dynarray_grow_cap

This is for the case that user only know a max size
it wants to append to the array and enlarge the array
capacity before writing into it.

v2:
- rename newsize to newcap
- rename util_dynarray_enlarge to util_dynarray_grow_cap

Signed-off-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

u_math: add ushort_to_float/float_to_ushort

v2:
- return 0 for NaN too

Signed-off-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

gallium: trace: Add missing fence related wrappers

Without that kmscube with GALLIUM_TRACE would segfault like:

  #0  0x0000000000000000 in  ()
  #1  0x0000ffff8f311760 in dri2_create_fence_fd (_ctx=0xaaaae266b8b0, fd=10) at ../src/gallium/state_trackers/dri/dri_helpers.c:122
  #2  0x0000ffff90788670 in dri2_create_sync (drv=0xaaaae2667910, disp=0xaaaae26691f0, type=12612, attrib_list=0xaaaae26b9290) at ../src/egl/drivers/dri2/egl_dri2.c:2993
  #3  0x0000ffff90776a9c in _eglCreateSync (disp=0xaaaae26691f0, type=12612, attrib_list=0xaaaae26b9290, orig_is_EGLAttrib=0, invalid_type_error=12292) at ../src/egl/main/eglapi.c:1823
  #4  0x0000ffff90776be4 in eglCreateSyncKHR (dpy=0xaaaae26691f0, type=12612, int_list=0xfffff662e828) at ../src/egl/main/eglapi.c:1848

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

intel/tools: Remove redundant definitions of INTEL_DEBUG

INTEL_DEBUG is declared extern and defined in gen_debug.c

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/common: move gen_debug to intel/dev

libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler.  Break the circular
dependency by moving gen_debug files to libintel_dev.

Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: support INTEL_NO_HW environment variable

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: Fix the description of Coffeelake pci-id 0x3E98

According to Intel website [1], the description of chipset 8086:3E98 is
Intel(R) UHD Graphics 630.  Besides, xserver also mentions it as
"Intel(R) UHD Graphics 630 (Coffeelake 3x8 GT2)" in commit d3a26bbf
(DRI2: Add another Coffeelake PCI ID) [2].

This patch modifies the description to sync with xserver.

[1]: https://ark.intel.com/content/www/us/en/ark/products/134896/intel-core-i5-9600k-processor-9m-cache-up-to-4-60-ghz.html
[2]: https://gitlab.freedesktop.org/xorg/xserver/commit/d3a26bbf618507e1ca05b2bc99a880075b77db77

Fixes: commit 44f1dcf9b3fd "i965: Add a new CFL PCI ID."
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Anuj Phogat anuj.phogat@gmail.com

Partially revert "gallium: fix autotools build of pipe_msm.la"

This partially reverts commit 356ec7a21960d77db282f67af577dcdb46966b5a.
There are symbols needed by libglsl missing, so we might as well skip
the entire library.

Fixes: 356ec7a21960d77db282f67af577dcdb46966b5a
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Acked-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Vinson Lee <vlee@freedesktop.org>