| 2022-04-04 |
Luke Kenneth... | disable ethmac for now, pass firmware.hex to cypress... |
commit | commitdiff | tree |
| 2022-04-04 |
Luke Kenneth... | redo start address of firmware so it can be specified... |
commit | commitdiff | tree |
| 2022-04-04 |
Raptor Engineering... | Fix SPI device simulation model MISO/MOSI wiring |
commit | commitdiff | tree |
| 2022-04-02 |
Raptor Engineering... | Add 10/100 MAC pins for Versa boards and enable MAC |
commit | commitdiff | tree |
| 2022-03-31 |
Luke Kenneth... | reduce number of params obtained on QSPI for icarus sim |
commit | commitdiff | tree |
| 2022-03-31 |
Luke Kenneth... | got icarus verilog model of QSPI working and it returns... |
commit | commitdiff | tree |
| 2022-03-31 |
Luke Kenneth... | whitespace cleanup |
commit | commitdiff | tree |
| 2022-03-31 |
Raptor Engineering... | Fix Tercel QSPI master connections |
commit | commitdiff | tree |
| 2022-03-31 |
Luke Kenneth... | remove {err} feature from Tercel |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | add err wishbone feature to Tercel |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | add config-dump from SPI |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | remove clk from spi_flash, |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | add qspi module to arty_a7 |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | quick-and-dirty QSPI read test |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | use nmigen_boards naming conventions for SPIFlash |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | update comments, link/setup of peripherals |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | add TODO comments about using platform.add_resources |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | whitespace cleanup, 80 char limit |
commit | commitdiff | tree |
| 2022-03-29 |
Luke Kenneth... | add patch for n25q to fix model using fork/join, should... |
commit | commitdiff | tree |
| 2022-03-29 |
Raptor Engineering... | Add initial integration for OpenCores 10/100 Ethernet MAC |
commit | commitdiff | tree |
| 2022-03-28 |
Raptor Engineering... | Fix instructions in comment |
commit | commitdiff | tree |
| 2022-03-28 |
Luke Kenneth... | quick memory test increasing by power-2 each time shows... |
commit | commitdiff | tree |
| 2022-03-27 |
Luke Kenneth... | set reset from ResetSignal not straight to 1 for HyperRAM |
commit | commitdiff | tree |
| 2022-03-27 |
Luke Kenneth... | try latency of 7 for winbond hyperram |
commit | commitdiff | tree |
| 2022-03-27 |
Luke Kenneth... | add link to Winbond HyperRAM model |
commit | commitdiff | tree |
| 2022-03-27 |
Luke Kenneth... | set upper CSns on HyperRAM to zero and set reset_n HI |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | add clock output on hyperram sim |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | add all 4 CSn lines for Quad HyperRAM PMOD |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | grr |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | reduce power-on-delay bits to 2 for icarus sim ecp5 |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | remove switches from hyperram iverilog test |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | remove unneeded model variable |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | add missing ECP5 model OBZ.v and rename testbench |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | sort out platform IO pads for iverilog hyperram sim |
commit | commitdiff | tree |
| 2022-03-26 |
Luke Kenneth... | add hyperram iverilog runner including s27kl0641.v... |
commit | commitdiff | tree |
| 2022-03-25 |
Luke Kenneth... | rename ECP5 CRG, move source, remove duplicate version |
commit | commitdiff | tree |
| 2022-03-25 |
Luke Kenneth... | up arty a7 frequency to 40 mhz |
commit | commitdiff | tree |
| 2022-03-25 |
Luke Kenneth... | increase time for power-on-delay to 2^25 in ECP5 |
commit | commitdiff | tree |
| 2022-03-25 |
Luke Kenneth... | loop-test on hyperram read/write which needs carriage... |
commit | commitdiff | tree |
| 2022-03-24 |
Luke Kenneth... | increase delay on ECP5 ulx3s |
commit | commitdiff | tree |
| 2022-03-24 |
Luke Kenneth... | check ulx3s, add CRG support for ulx3s |
commit | commitdiff | tree |
| 2022-03-24 |
Luke Kenneth... | establish power-on reset stabilisation for Arty A7... |
commit | commitdiff | tree |
| 2022-03-22 |
Luke Kenneth... | add hack to modify VERSA_ECP5 85F platform to speed... |
commit | commitdiff | tree |
| 2022-03-22 |
Luke Kenneth... | adding hyperram for arty a7 and also adding a workaroun... |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | add microwatt hello_world source |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | crank A7 FPGA speed down to experiment |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | code-comments |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | fix Arty A7-100t PLL with quick demo |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | first cut at Arty A7 Clock-Reset-Generator with S7 PLL |
commit | commitdiff | tree |
| 2022-03-20 |
Luke Kenneth... | beginnings of arty a7 clock-reset-generator |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | add VERSA_ECP5 85F custom board |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | move quick read/write test for hyperram in coldboot.c |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | set IO_TYPE 3.3v attribute on HyperRAM not IOSTANDARD |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | correct pin names for HyperRAMResource, indent spi0... |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | fixed hyperram pin names which was stopping verilator... |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | disable hyperram for now (under investigation) |
commit | commitdiff | tree |
| 2022-03-19 |
Luke Kenneth... | adding in hyperram peripheral |
commit | commitdiff | tree |
| 2022-03-18 |
Luke Kenneth... | whitespace / module-import / comments / tidyup |
commit | commitdiff | tree |
| 2022-03-18 |
Luke Kenneth... | beginning to add hyperram module |
commit | commitdiff | tree |
| 2022-03-18 |
Luke Kenneth... | whitespace cleanup and make SPI core (temporarily)... |
commit | commitdiff | tree |
| 2022-03-17 |
Luke Kenneth... | work-in-progress on DDR3 firmware. sigh |
commit | commitdiff | tree |
| 2022-03-17 |
Luke Kenneth... | comment about icarus verilog to speed up simulations |
commit | commitdiff | tree |
| 2022-03-16 |
Raptor Engineering... | Add initial Tercel SPI controller |
commit | commitdiff | tree |
| 2022-03-10 |
Luke Kenneth... | sigh gramWishbone is not WB4-pipeline-burst-compliant |
commit | commitdiff | tree |
| 2022-03-09 |
Luke Kenneth... | fix WB6to32 downconverter with stall signalling |
commit | commitdiff | tree |
| 2022-03-09 |
Luke Kenneth... | add stall signal to arbiter, assume nmigen-soc takes |
commit | commitdiff | tree |
| 2022-03-04 |
Luke Kenneth... | add experimental stall-capable 64-to-32 wishbone converter |
commit | commitdiff | tree |
| 2022-03-02 |
Luke Kenneth... | lots of comments in the yosys script file |
commit | commitdiff | tree |
| 2022-03-02 |
Luke Kenneth... | invert reset and chip-select on dram, and initialise... |
commit | commitdiff | tree |
| 2022-03-02 |
Luke Kenneth... | forgot to include firmware in build for new icarus... |
commit | commitdiff | tree |
| 2022-03-01 |
Luke Kenneth... | add new icarus-versa-ecp5 platform in ls2.py |
commit | commitdiff | tree |
| 2022-02-28 |
Luke Kenneth... | increase timescale of icarus simulation |
commit | commitdiff | tree |
| 2022-02-28 |
Luke Kenneth... | fix undefined uart_tx in icarus simulation, icarus... |
commit | commitdiff | tree |
| 2022-02-28 |
Luke Kenneth... | use a slightly different yosys initialisation sequence... |
commit | commitdiff | tree |
| 2022-02-28 |
Luke Kenneth... | fix memory issue in yosys synth for icarus |
commit | commitdiff | tree |
| 2022-02-28 |
Luke Kenneth... | add icarus simulation of ls2 with DDR3 and ECP5 models |
commit | commitdiff | tree |
| 2022-02-23 |
Luke Kenneth... | invert CRG reset on PLL see if it makes any difference |
commit | commitdiff | tree |
| 2022-02-23 |
Luke Kenneth... | add comments about DRAM sync clock being identical... |
commit | commitdiff | tree |
| 2022-02-22 |
Luke Kenneth... | xdr=4 missing on ddr3 platform request for VERSA_ECP5 |
commit | commitdiff | tree |
| 2022-02-21 |
Luke Kenneth... | lengthen cdelay pauses by a factor of 10 |
commit | commitdiff | tree |
| 2022-02-21 |
Luke Kenneth... | * use readl and writel for accessing memory |
commit | commitdiff | tree |
| 2022-02-21 |
Luke Kenneth... | use microwatt mmu powerpc.lds with better stack space |
commit | commitdiff | tree |
| 2022-02-20 |
Luke Kenneth... | fix dfi initialisation and calibration to use |
commit | commitdiff | tree |
| 2022-02-20 |
Luke Kenneth... | set RAM base to #defined DRAM_BASE not hard-coded value |
commit | commitdiff | tree |
| 2022-02-20 |
Luke Kenneth... | for simulatio keep the simulated dram in the |
commit | commitdiff | tree |
| 2022-02-20 |
Luke Kenneth... | add fake (sim) DRAM from gram library |
commit | commitdiff | tree |
| 2022-02-19 |
Luke Kenneth... | match up dram initialisation parameters |
commit | commitdiff | tree |
| 2022-02-19 |
Luke Kenneth... | put together coldboot startup firmware |
commit | commitdiff | tree |
| 2022-02-19 |
Luke Kenneth... | hm -abc9 seems to be working, and without -nowidelut |
commit | commitdiff | tree |
| 2022-02-18 |
Luke Kenneth... | add DRAM class to DDR3Soc |
commit | commitdiff | tree |
| 2022-02-18 |
Luke Kenneth... | add FPGA argument to DDR3SoC |
commit | commitdiff | tree |
| 2022-02-18 |
Luke Kenneth... | add microwatt console lib and #includes |
commit | commitdiff | tree |
| 2022-02-18 |
Luke Kenneth... | make cpu optional (test purposes), make bios optional, |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | remove minerva cpu |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | drop clock frequency to 25 mhz and disable abc9 (it... |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | add openocd load command for ecp5 |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | wildcards never ok. update comments |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | add copyright notices |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | update ECP5 PLL to accept parameters for setting arbitr... |
commit | commitdiff | tree |
| 2022-02-16 |
Luke Kenneth... | add start of README as reminder |
commit | commitdiff | tree |
| next |
projects / ls2.git / shortlog