Loader: Only complain about TLS sections if you're using Alpha.
[gem5.git] / src / sim / process.cc
1 /*
2 * Copyright (c) 2001-2005 The Regents of The University of Michigan
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are
7 * met: redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer;
9 * redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution;
12 * neither the name of the copyright holders nor the names of its
13 * contributors may be used to endorse or promote products derived from
14 * this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 *
28 * Authors: Nathan Binkert
29 * Steve Reinhardt
30 * Ali Saidi
31 */
32
33 #include <unistd.h>
34 #include <fcntl.h>
35
36 #include <string>
37
38 #include "arch/remote_gdb.hh"
39 #include "base/intmath.hh"
40 #include "base/loader/object_file.hh"
41 #include "base/loader/symtab.hh"
42 #include "base/statistics.hh"
43 #include "config/full_system.hh"
44 #include "cpu/thread_context.hh"
45 #include "mem/page_table.hh"
46 #include "mem/physical.hh"
47 #include "mem/translating_port.hh"
48 #include "params/LiveProcess.hh"
49 #include "sim/process.hh"
50 #include "sim/process_impl.hh"
51 #include "sim/stats.hh"
52 #include "sim/syscall_emul.hh"
53 #include "sim/system.hh"
54
55 #include "arch/isa_specific.hh"
56 #if THE_ISA == ALPHA_ISA
57 #include "arch/alpha/linux/process.hh"
58 #include "arch/alpha/tru64/process.hh"
59 #elif THE_ISA == SPARC_ISA
60 #include "arch/sparc/linux/process.hh"
61 #include "arch/sparc/solaris/process.hh"
62 #elif THE_ISA == MIPS_ISA
63 #include "arch/mips/linux/process.hh"
64 #elif THE_ISA == X86_ISA
65 #include "arch/x86/linux/process.hh"
66 #else
67 #error "THE_ISA not set"
68 #endif
69
70
71 using namespace std;
72 using namespace TheISA;
73
74 //
75 // The purpose of this code is to fake the loader & syscall mechanism
76 // when there's no OS: thus there's no resone to use it in FULL_SYSTEM
77 // mode when we do have an OS
78 //
79 #if FULL_SYSTEM
80 #error "process.cc not compatible with FULL_SYSTEM"
81 #endif
82
83 // current number of allocated processes
84 int num_processes = 0;
85
86 Process::Process(const string &nm,
87 System *_system,
88 int stdin_fd, // initial I/O descriptors
89 int stdout_fd,
90 int stderr_fd)
91 : SimObject(makeParams(nm)), system(_system)
92 {
93 M5_pid = system->allocatePID();
94 // initialize first 3 fds (stdin, stdout, stderr)
95 fd_map[STDIN_FILENO] = stdin_fd;
96 fd_map[STDOUT_FILENO] = stdout_fd;
97 fd_map[STDERR_FILENO] = stderr_fd;
98
99 // mark remaining fds as free
100 for (int i = 3; i <= MAX_FD; ++i) {
101 fd_map[i] = -1;
102 }
103
104 mmap_start = mmap_end = 0;
105 nxm_start = nxm_end = 0;
106 pTable = new PageTable(system);
107 // other parameters will be initialized when the program is loaded
108 }
109
110
111 void
112 Process::regStats()
113 {
114 using namespace Stats;
115
116 num_syscalls
117 .name(name() + ".PROG:num_syscalls")
118 .desc("Number of system calls")
119 ;
120 }
121
122 //
123 // static helper functions
124 //
125 int
126 Process::openInputFile(const string &filename)
127 {
128 int fd = open(filename.c_str(), O_RDONLY);
129
130 if (fd == -1) {
131 perror(NULL);
132 cerr << "unable to open \"" << filename << "\" for reading\n";
133 fatal("can't open input file");
134 }
135
136 return fd;
137 }
138
139
140 int
141 Process::openOutputFile(const string &filename)
142 {
143 int fd = open(filename.c_str(), O_WRONLY | O_CREAT | O_TRUNC, 0774);
144
145 if (fd == -1) {
146 perror(NULL);
147 cerr << "unable to open \"" << filename << "\" for writing\n";
148 fatal("can't open output file");
149 }
150
151 return fd;
152 }
153
154
155 int
156 Process::registerThreadContext(ThreadContext *tc)
157 {
158 // add to list
159 int myIndex = threadContexts.size();
160 threadContexts.push_back(tc);
161
162 // RemoteGDB *rgdb = new RemoteGDB(system, tc);
163 // GDBListener *gdbl = new GDBListener(rgdb, 7000 + myIndex);
164 // gdbl->listen();
165 //gdbl->accept();
166
167 // remoteGDB.push_back(rgdb);
168
169 // return CPU number to caller
170 return myIndex;
171 }
172
173 void
174 Process::startup()
175 {
176 if (threadContexts.empty())
177 fatal("Process %s is not associated with any CPUs!\n", name());
178
179 // first thread context for this process... initialize & enable
180 ThreadContext *tc = threadContexts[0];
181
182 // mark this context as active so it will start ticking.
183 tc->activate(0);
184
185 Port *mem_port;
186 mem_port = system->physmem->getPort("functional");
187 initVirtMem = new TranslatingPort("process init port", this,
188 TranslatingPort::Always);
189 mem_port->setPeer(initVirtMem);
190 initVirtMem->setPeer(mem_port);
191 }
192
193 void
194 Process::replaceThreadContext(ThreadContext *tc, int tcIndex)
195 {
196 if (tcIndex >= threadContexts.size()) {
197 panic("replaceThreadContext: bad tcIndex, %d >= %d\n",
198 tcIndex, threadContexts.size());
199 }
200
201 threadContexts[tcIndex] = tc;
202 }
203
204 // map simulator fd sim_fd to target fd tgt_fd
205 void
206 Process::dup_fd(int sim_fd, int tgt_fd)
207 {
208 if (tgt_fd < 0 || tgt_fd > MAX_FD)
209 panic("Process::dup_fd tried to dup past MAX_FD (%d)", tgt_fd);
210
211 fd_map[tgt_fd] = sim_fd;
212 }
213
214
215 // generate new target fd for sim_fd
216 int
217 Process::alloc_fd(int sim_fd)
218 {
219 // in case open() returns an error, don't allocate a new fd
220 if (sim_fd == -1)
221 return -1;
222
223 // find first free target fd
224 for (int free_fd = 0; free_fd < MAX_FD; ++free_fd) {
225 if (fd_map[free_fd] == -1) {
226 fd_map[free_fd] = sim_fd;
227 return free_fd;
228 }
229 }
230
231 panic("Process::alloc_fd: out of file descriptors!");
232 }
233
234
235 // free target fd (e.g., after close)
236 void
237 Process::free_fd(int tgt_fd)
238 {
239 if (fd_map[tgt_fd] == -1)
240 warn("Process::free_fd: request to free unused fd %d", tgt_fd);
241
242 fd_map[tgt_fd] = -1;
243 }
244
245
246 // look up simulator fd for given target fd
247 int
248 Process::sim_fd(int tgt_fd)
249 {
250 if (tgt_fd > MAX_FD)
251 return -1;
252
253 return fd_map[tgt_fd];
254 }
255
256 bool
257 Process::checkAndAllocNextPage(Addr vaddr)
258 {
259 // if this is an initial write we might not have
260 if (vaddr >= stack_min && vaddr < stack_base) {
261 pTable->allocate(roundDown(vaddr, VMPageSize), VMPageSize);
262 return true;
263 }
264
265 // We've accessed the next page of the stack, so extend the stack
266 // to cover it.
267 if(vaddr < stack_min && vaddr >= stack_min - TheISA::PageBytes)
268 {
269 stack_min -= TheISA::PageBytes;
270 if(stack_base - stack_min > 8*1024*1024)
271 fatal("Over max stack size for one thread\n");
272 pTable->allocate(stack_min, TheISA::PageBytes);
273 warn("Increasing stack size by one page.");
274 return true;
275 }
276 return false;
277 }
278
279 void
280 Process::serialize(std::ostream &os)
281 {
282 SERIALIZE_SCALAR(initialContextLoaded);
283 SERIALIZE_SCALAR(brk_point);
284 SERIALIZE_SCALAR(stack_base);
285 SERIALIZE_SCALAR(stack_size);
286 SERIALIZE_SCALAR(stack_min);
287 SERIALIZE_SCALAR(next_thread_stack_base);
288 SERIALIZE_SCALAR(mmap_start);
289 SERIALIZE_SCALAR(mmap_end);
290 SERIALIZE_SCALAR(nxm_start);
291 SERIALIZE_SCALAR(nxm_end);
292 SERIALIZE_ARRAY(fd_map, MAX_FD);
293
294 pTable->serialize(os);
295 }
296
297 void
298 Process::unserialize(Checkpoint *cp, const std::string &section)
299 {
300 UNSERIALIZE_SCALAR(initialContextLoaded);
301 UNSERIALIZE_SCALAR(brk_point);
302 UNSERIALIZE_SCALAR(stack_base);
303 UNSERIALIZE_SCALAR(stack_size);
304 UNSERIALIZE_SCALAR(stack_min);
305 UNSERIALIZE_SCALAR(next_thread_stack_base);
306 UNSERIALIZE_SCALAR(mmap_start);
307 UNSERIALIZE_SCALAR(mmap_end);
308 UNSERIALIZE_SCALAR(nxm_start);
309 UNSERIALIZE_SCALAR(nxm_end);
310 UNSERIALIZE_ARRAY(fd_map, MAX_FD);
311
312 pTable->unserialize(cp, section);
313 }
314
315
316 ////////////////////////////////////////////////////////////////////////
317 //
318 // LiveProcess member definitions
319 //
320 ////////////////////////////////////////////////////////////////////////
321
322
323 LiveProcess::LiveProcess(const string &nm, ObjectFile *_objFile,
324 System *_system,
325 int stdin_fd, int stdout_fd, int stderr_fd,
326 vector<string> &_argv, vector<string> &_envp,
327 const string &_cwd,
328 uint64_t _uid, uint64_t _euid,
329 uint64_t _gid, uint64_t _egid,
330 uint64_t _pid, uint64_t _ppid)
331 : Process(nm, _system, stdin_fd, stdout_fd, stderr_fd),
332 objFile(_objFile), argv(_argv), envp(_envp), cwd(_cwd)
333 {
334 __uid = _uid;
335 __euid = _euid;
336 __gid = _gid;
337 __egid = _egid;
338 __pid = _pid;
339 __ppid = _ppid;
340
341 prog_fname = argv[0];
342
343 // load up symbols, if any... these may be used for debugging or
344 // profiling.
345 if (!debugSymbolTable) {
346 debugSymbolTable = new SymbolTable();
347 if (!objFile->loadGlobalSymbols(debugSymbolTable) ||
348 !objFile->loadLocalSymbols(debugSymbolTable)) {
349 // didn't load any symbols
350 delete debugSymbolTable;
351 debugSymbolTable = NULL;
352 }
353 }
354 }
355
356 void
357 LiveProcess::argsInit(int intSize, int pageSize)
358 {
359 Process::startup();
360
361 // load object file into target memory
362 objFile->loadSections(initVirtMem);
363
364 // Calculate how much space we need for arg & env arrays.
365 int argv_array_size = intSize * (argv.size() + 1);
366 int envp_array_size = intSize * (envp.size() + 1);
367 int arg_data_size = 0;
368 for (int i = 0; i < argv.size(); ++i) {
369 arg_data_size += argv[i].size() + 1;
370 }
371 int env_data_size = 0;
372 for (int i = 0; i < envp.size(); ++i) {
373 env_data_size += envp[i].size() + 1;
374 }
375
376 int space_needed =
377 argv_array_size + envp_array_size + arg_data_size + env_data_size;
378 if (space_needed < 32*1024)
379 space_needed = 32*1024;
380
381 // set bottom of stack
382 stack_min = stack_base - space_needed;
383 // align it
384 stack_min = roundDown(stack_min, pageSize);
385 stack_size = stack_base - stack_min;
386 // map memory
387 pTable->allocate(stack_min, roundUp(stack_size, pageSize));
388
389 // map out initial stack contents
390 Addr argv_array_base = stack_min + intSize; // room for argc
391 Addr envp_array_base = argv_array_base + argv_array_size;
392 Addr arg_data_base = envp_array_base + envp_array_size;
393 Addr env_data_base = arg_data_base + arg_data_size;
394
395 // write contents to stack
396 uint64_t argc = argv.size();
397 if (intSize == 8)
398 argc = htog((uint64_t)argc);
399 else if (intSize == 4)
400 argc = htog((uint32_t)argc);
401 else
402 panic("Unknown int size");
403
404 initVirtMem->writeBlob(stack_min, (uint8_t*)&argc, intSize);
405
406 copyStringArray(argv, argv_array_base, arg_data_base, initVirtMem);
407 copyStringArray(envp, envp_array_base, env_data_base, initVirtMem);
408
409 assert(NumArgumentRegs >= 2);
410 threadContexts[0]->setIntReg(ArgumentReg[0], argc);
411 threadContexts[0]->setIntReg(ArgumentReg[1], argv_array_base);
412 threadContexts[0]->setIntReg(StackPointerReg, stack_min);
413
414 Addr prog_entry = objFile->entryPoint();
415 threadContexts[0]->setPC(prog_entry);
416 threadContexts[0]->setNextPC(prog_entry + sizeof(MachInst));
417
418 #if THE_ISA != ALPHA_ISA //e.g. MIPS or Sparc
419 threadContexts[0]->setNextNPC(prog_entry + (2 * sizeof(MachInst)));
420 #endif
421
422 num_processes++;
423 }
424
425 void
426 LiveProcess::syscall(int64_t callnum, ThreadContext *tc)
427 {
428 num_syscalls++;
429
430 SyscallDesc *desc = getDesc(callnum);
431 if (desc == NULL)
432 fatal("Syscall %d out of range", callnum);
433
434 desc->doSyscall(callnum, this, tc);
435 }
436
437 LiveProcess *
438 LiveProcess::create(const std::string &nm, System *system, int stdin_fd,
439 int stdout_fd, int stderr_fd, std::string executable,
440 std::vector<std::string> &argv,
441 std::vector<std::string> &envp,
442 const std::string &cwd,
443 uint64_t _uid, uint64_t _euid,
444 uint64_t _gid, uint64_t _egid,
445 uint64_t _pid, uint64_t _ppid)
446 {
447 LiveProcess *process = NULL;
448
449 ObjectFile *objFile = createObjectFile(executable);
450 if (objFile == NULL) {
451 fatal("Can't load object file %s", executable);
452 }
453
454 if (objFile->isDynamic())
455 fatal("Object file is a dynamic executable however only static "
456 "executables are supported!\n Please recompile your "
457 "executable as a static binary and try again.\n");
458
459 #if THE_ISA == ALPHA_ISA
460 if (objFile->hasTLS())
461 fatal("Object file has a TLS section and single threaded TLS is not\n"
462 " currently supported for Alpha! Please recompile your "
463 "executable with \n a non-TLS toolchain.\n");
464
465 if (objFile->getArch() != ObjectFile::Alpha)
466 fatal("Object file architecture does not match compiled ISA (Alpha).");
467 switch (objFile->getOpSys()) {
468 case ObjectFile::Tru64:
469 process = new AlphaTru64Process(nm, objFile, system,
470 stdin_fd, stdout_fd, stderr_fd,
471 argv, envp, cwd,
472 _uid, _euid, _gid, _egid, _pid, _ppid);
473 break;
474
475 case ObjectFile::Linux:
476 process = new AlphaLinuxProcess(nm, objFile, system,
477 stdin_fd, stdout_fd, stderr_fd,
478 argv, envp, cwd,
479 _uid, _euid, _gid, _egid, _pid, _ppid);
480 break;
481
482 default:
483 fatal("Unknown/unsupported operating system.");
484 }
485 #elif THE_ISA == SPARC_ISA
486 if (objFile->getArch() != ObjectFile::SPARC64 && objFile->getArch() != ObjectFile::SPARC32)
487 fatal("Object file architecture does not match compiled ISA (SPARC).");
488 switch (objFile->getOpSys()) {
489 case ObjectFile::Linux:
490 if (objFile->getArch() == ObjectFile::SPARC64) {
491 process = new Sparc64LinuxProcess(nm, objFile, system,
492 stdin_fd, stdout_fd, stderr_fd,
493 argv, envp, cwd,
494 _uid, _euid, _gid,
495 _egid, _pid, _ppid);
496 } else {
497 process = new Sparc32LinuxProcess(nm, objFile, system,
498 stdin_fd, stdout_fd, stderr_fd,
499 argv, envp, cwd,
500 _uid, _euid, _gid,
501 _egid, _pid, _ppid);
502 }
503 break;
504
505
506 case ObjectFile::Solaris:
507 process = new SparcSolarisProcess(nm, objFile, system,
508 stdin_fd, stdout_fd, stderr_fd,
509 argv, envp, cwd,
510 _uid, _euid, _gid, _egid, _pid, _ppid);
511 break;
512 default:
513 fatal("Unknown/unsupported operating system.");
514 }
515 #elif THE_ISA == X86_ISA
516 if (objFile->getArch() != ObjectFile::X86)
517 fatal("Object file architecture does not match compiled ISA (x86).");
518 switch (objFile->getOpSys()) {
519 case ObjectFile::Linux:
520 process = new X86LinuxProcess(nm, objFile, system,
521 stdin_fd, stdout_fd, stderr_fd,
522 argv, envp, cwd,
523 _uid, _euid, _gid,
524 _egid, _pid, _ppid);
525 break;
526 default:
527 fatal("Unknown/unsupported operating system.");
528 }
529 #elif THE_ISA == MIPS_ISA
530 if (objFile->getArch() != ObjectFile::Mips)
531 fatal("Object file architecture does not match compiled ISA (MIPS).");
532 switch (objFile->getOpSys()) {
533 case ObjectFile::Linux:
534 process = new MipsLinuxProcess(nm, objFile, system,
535 stdin_fd, stdout_fd, stderr_fd,
536 argv, envp, cwd,
537 _uid, _euid, _gid, _egid, _pid, _ppid);
538 break;
539
540 default:
541 fatal("Unknown/unsupported operating system.");
542 }
543 #else
544 #error "THE_ISA not set"
545 #endif
546
547
548 if (process == NULL)
549 fatal("Unknown error creating process object.");
550 return process;
551 }
552
553 LiveProcess *
554 LiveProcessParams::create()
555 {
556 string in = input;
557 string out = output;
558
559 // initialize file descriptors to default: same as simulator
560 int stdin_fd, stdout_fd, stderr_fd;
561
562 if (in == "stdin" || in == "cin")
563 stdin_fd = STDIN_FILENO;
564 else
565 stdin_fd = Process::openInputFile(input);
566
567 if (out == "stdout" || out == "cout")
568 stdout_fd = STDOUT_FILENO;
569 else if (out == "stderr" || out == "cerr")
570 stdout_fd = STDERR_FILENO;
571 else
572 stdout_fd = Process::openOutputFile(out);
573
574 stderr_fd = (stdout_fd != STDOUT_FILENO) ? stdout_fd : STDERR_FILENO;
575
576 return LiveProcess::create(name, system,
577 stdin_fd, stdout_fd, stderr_fd,
578 (string)executable == "" ? cmd[0] : executable,
579 cmd, env, cwd,
580 uid, euid, gid, egid, pid, ppid);
581 }