Replaced shadow.jpg with svg one.

[libreriscv.git] / isa_conflict_resolution.mdwn

# Resolving ISA conflicts and providing a pain-free RISC-V Standards Upgrade Path

**Note: out-of-date as of review 31apr2018, requires updating to reflect
"mvendorid-marchid-isamux" concept.**  Recent discussion 10jun2019
<https://groups.google.com/a/groups.riscv.org/d/msg/isa-dev/x-uFZDXiOxY/_ISBs1enCgAJ>.
Now updated with its own spec [[isamux_isans]].

[[!toc ]]

## Executive Summary (old, still relevant for compilers)

A non-invasive backwards-compatible change to make mvendorid and marchid
being read-only to be a formal declaration of an architecture having no
Custom Extensions, and being permitted to be WARL in order to support
multiple simultaneous architectures on the same processor (or per hart
or harts) permits not only backwards and forwards compatibility with
existing implementations of the RISC-V Standard, not only permits seamless
transitions to future versions of the RISC-V Standard (something that is
not possible at the moment), but fixes the problem of clashes in Custom
Extension opcodes on a global worldwide permanent and ongoing basis.

Summary of impact and benefits:

* Implementation impact for existing implementations (even though
  the Standard is not finalised) is zero.
* Impact for future implementations compliant with (only one) version of the
  RISC-V Standard is zero.
* Benefits for implementations complying with (one or more) versions
  of the RISC-V Standard is: increased customer acceptance due to
  a smooth upgrade path at the customer's pace and initiative vis-a-vis
  legacy proprietary software.
* Benefits for implementations deploying multiple Custom Extensions
  are a massive reduction in NREs and the hugely reduced ongoing software
  toolchain maintenance costs plus the benefit of having security updates
  from upstream software sources due to
  *globally unique identifying information* resulting in zero binary
  encoding conflicts in the toolchains and resultant binaries
  *even for Custom Extensions*.

## Introduction

In a lengthy thread that ironically was full of conflict indicative
of the future direction in which RISC-V will go if left unresolved,
multiple Custom Extensions were noted to be permitted free rein to
introduce global binary-encoding conflict with no means of resolution
described or endorsed by the RISC-V Standard: a practice that has known
disastrous and irreversible consequences for any architecture that
permits such practices (1).

Much later on in the discussion it was realised that there is also no way
within the current RISC-V Specification to transition to improved versions
of the standard, regardless of whether the fixes are absolutely critical
show-stoppers or whether they are just keeping the standard up-to-date (2).

With no transition path there is guaranteed to be tension and conflict
within the RISC-V Community over whether revisions should be made:
should existing legacy designs be prioritised, mutually-exclusively over
future designs (and what happens during the transition period is absolute
chaos, with the compiler toolchain, software ecosystem and ultimately
the end-users bearing the full brunt of the impact).  If several
overlapping revisions are required that have not yet transitioned out
of use (which could take well over two decades to occur) the situation
becomes disastrous for the credibility of the entire RISC-V ecosystem.

It was also pointed out that Compliance is an extremely important factor
to take into consideration, and that Custom Extensions (as being optional)
effectively and quite reasonably fall entirely outside of the scope of
Compliance Testing.  At this point in the discussion however it was not
yet noted the stark problem that the *mandatory* RISC-V Specification
also faces, by virtue of there being no transitional way to bring in
show-stopping critical alterations.

To put this into perspective, just taking into account hardware costs
alone: with production mask charges for 28nm being around USD $1.5m,
engineering development costs and licensing of RTLs for peripherals
being of a similar magnitude, no manufacturer is going to back away
from selling a "flawed" or "legacy" product (whether it complies with
the RISC-V Specification or not) without a bitter fight.

It was also pointed out that there will be significant software tool
maintenance costs for manufacturers, meaning that the probability will
be extremely high that they will refuse to shoulder such costs, and
will publish and continue to publish (and use) hopelessly out-of-date
unpatched tools.  This practice is well-known to result in security
flaws going unpatched, with one of many immediate undesirable consequences
being that product in extremely large volume gets discarded into landfill.

**All and any of the issues that were discussed, and all of those that
were not, can be avoided by providing a hardware-level runtime-enabled
forwards and backwards compatible transition path between *all* parts
(mandatory or not) of current and future revisions of the RISC-V ISA
Standard.**

The rest of the discussion - indicative as it was of the stark mutually
exclusive gap being faced by the RISC-V ISA Standard given that it does
not cope with the problem - was an effort by two groups in two clear
camps: one that wanted things to remain as they are, and another that
made efforts to point out that the consequences of not taking action
are clearly extreme and irreversible (which, unfortunately, given the
severity, some of the first group were unable to believe, despite there
being clear historical precedent for the exact same mistake being made in
other architectures, and the consequences on the same being absolutely
clear).

However after a significant amount of time, certain clear requirements came
out of the discussion:

* Any proposal must be a minimal change with minimal (or zero) impact
* Any proposal should place no restriction on existing or future
  ISA encoding space
* Any proposal should take into account that there are existing implementors
  of the (yet to be finalised but still "partly frozen") Standard who may
  resist, for financial investment reasons, efforts to make any change
  (at all) that could cost them immediate short-term profits.

Several proposals were put forward (and some are still under discussion)

* "Do nothing": problem is not severe: no action needed.
* "Do nothing": problem is out-of-scope for RISC-V Foundation.
* "Do nothing": problem complicates Compliance Testing (and is out of scope)
* "MISA": the MISA CSR enables and disables extensions already: use that
* "MISA-like": a new CSR which switches in and out new encodings
  (without destroying state)
* "mvendorid/marchid WARL": switching the entire "identity" of a machine
* "ioctl-like": a OO proposal based around the linux kernel "ioctl" system.

Each of these will be discussed below in their own sections.

# Do nothing (no problem exists)

(Summary: not an option)

There were several solutions offered that fell into this category.
A few of them are listed in the introduction; more are listed below,
and it was exhaustively (and exhaustingly) established that none of
them are workable.

Initially it was pointed out that Fabless Semiconductor companies could
simply license multiple Custom Extensions and a suitable RISC-V core, and
modify them accordingly.  The Fabless Semi Company would be responsible
for paying the NREs on re-developing the test vectors (as the extension
licensers would be extremely unlikely to do that without payment), and
given that said Companies have an "integration" job to do, it would
be reasonable to expect them to have such additional costs as well.

The costs of this approach were outlined and discussed as being
disproportionate and extreme compared to the actual likely cost of
licensing the Custom Extensions in the first place.  Additionally it
was pointed out that not only hardware NREs would be involved but
custom software tools (compilers and more) would also be required
(and maintained separately, on the basis that upstream would not
accept them except under extreme pressure, and then only with
prejudice).

All similar schemes involving customisation of the custom extensions
were likewise rejected, but not before the customisation process was
mistakenly conflated with tne *normal* integration process of developing
a custom processor (Bus Architectures, Cache layouts, peripheral layouts).

The most compelling hardware-related reason (excluding the severe impact on
the software ecosystem) for rejecting the customisation-of-customisation
approach was the case where Extensions were using an instruction encoding
space (48-bit, 64-bit) *greater* than that which the chosen core could
cope with (32-bit, 48-bit).

Overall, none of the options presented were feasible, and, in addition,
with no clear leadership from the RISC-V Foundation on how to avoid
global world-wide encoding conflict, even if they were followed through,
still would result in the failure of the RISC-V ecosystem due to
irreversible global conflicting ISA binary-encoding meanings (POWERPC's
Altivec / SPE nightmare).

This in addition to the case where the RISC-V Foundation wishes to
fix a critical show-stopping update to the Standard, post-release,
where billions of dollars have been spent on deploying RISC-V in the
field.

# Do nothing (out of scope)

(Summary: may not be RV Foundation's "scope", still results in
problem, so not an option)

This was one of the first arguments presented: The RISC-V Foundation
considers Custom Extensions to be "out of scope"; that "it's not their
problem, therefore there isn't a problem".

The logical errors in this argument were quickly enumerated: namely that
the RISC-V Foundation is not in control of the uses to which RISC-V is
put, such that public global conflicts in binary-encoding are a hundred
percent guaranteed to occur (*outside* of the control and remit of the
RISC-V Foundation), and a hundred percent guaranteed to occur in
*commodity* hardware where Debian, Fedora, SUSE and other distros will
be hardest hit by the resultant chaos, and that will just be the more
"visible" aspect of the underlying problem.

# Do nothing (Compliance too complex, therefore out of scope)

(Summary: may not be RV Foundation's "scope", still results in
problem, so not an option)

The summary here was that Compliance testing of Custom Extensions is
not just out-of-scope, but even if it was taken into account that
binary-encoding meanings could change, it would still be out-of-scope.

However at the time that this argument was made, it had not yet been
appreciated fully the impact that revisions to the Standard would have,
when billions of dollars worth of (older, legacy) RISC-V hardware had
already been deployed.

Two interestingly diametrically-opposed equally valid arguments exist here:

* Whilst Compliance testing of Custom Extensions is definitely legitimately
  out of scope, Compliance testing of simultaneous legacy (old revisions of
  ISA Standards) and current (new revisions of ISA Standard) definitely
  is not.  Efforts to reduce *Compliance Testing* complexity is therefore
  "Compliance Tail Wagging Standard Dog".
* Beyond a certain threshold, complexity of Compliance Testing is so
  burdensome that it risks outright rejection of the entire Standard.

Meeting these two diametrically-opposed perspectives requires that the
solution be very, very simple.

# MISA

(Summary: MISA not suitable, leads to better idea)

MISA permits extensions to be disabled by masking out the relevant bit.
Hypothetically it could be used to disable one extension, then enable
another that happens to use the same binary encoding.

*However*:

* MISA Extension disabling is permitted (optionally) to **destroy**
  the state information.  Thus it is totally unsuitable for cases
  where instructions from different Custom extensions are needed in
  quick succession.
* MISA was only designed to cover Standard Extensions.
* There is nothing to prevent multiple Extensions being enabled
  that wish to simultaneously interpret the same binary encoding.
* There is nothing in the MISA specification which permits
  *future* versions (bug-fixes) of the RISC-V ISA to be "switched in".

Overall, whilst the MISA concept is a step in the right direction it's
a hundred percent unsuitable for solving the problem.

# MISA-like

(Summary: basically same as mvend/march WARL except needs an extra CSR where
mv/ma doesn't. Along right lines, doesn't meet full requirements)

Out of the MISA discussion came a "MISA-like" proposal, which would
take into account the flaws pointed out by trying to use "MISA":

* The MISA-like CSR's meaning would be identified by compilers using the
  mvendor-id/march-id tuple as a compiler target
* Each custom-defined bit of the MISA-like CSR would (mutually-exclusively)
  redirect binary encoding(s) to specific encodings
* No Extension would *actually* be disabled: its internal state would
  be left on (permanently) so that switching of ISA decoding
  could be done inside inner loops without adverse impact on
  performance.

Whilst it was the first "workable" solution it was also noted that the
scheme is invasive: it requires an entirely new CSR to be added
to the privileged spec (thus making existing implementations redundant).
This does not fulfil the "minimum impact" requirement.

Also interesting around the same time an additional discussion was
raised that covered the *compiler* side of the same equation.  This
revolved around using mvendorid-marchid tuples at the compiler level,
to be put into assembly output (by gcc), preserving the required
*globally* unique identifying information for binutils to successfully
turn the custom instruction into an actual binary-encoding (plus
binary-encoding of the context-switching information).  (**TBD, Jacob,
separate page?  review this para?**)

# mvendorid/marchid WARL <a name="mvendor_marchid_warl"></a>

(Summary: the only idea that meets the full requirements.  Needs
 toolchain backup, but only when the first chip is released)

This proposal has full details at the following page:
[[mvendor_march_warl]]

Coming out of the software-related proposal by Jacob Bachmeyer, which
hinged on the idea of a globally-maintained gcc / binutils database
that kept and coordinated architectural encodings (curated by the Free
Software Foundation), was to quite simply make the mvendorid and marchid
CSRs have WARL (writeable) characteristics.  Read-only is taken to
mean a declaration of "Having no Custom Extensions" (a zero-impact
change).

By making mvendorid-marchid tuples WARL the instruction decode phase
may re-route mutually-exclusively to different engines, thus providing
a controlled means and method of supporting multiple (future, past and
present) versions of the **Base** ISA, Custom Extensions and even
completely foreign ISAs in the same processor.

This incredibly simple non-invasive idea has some unique and distinct
advantages over other proposals:

* Existing designs - even though the specification is not finalised
  (but has "frozen" aspects) - would be completely unaffected: the
  change is to the "wording" of the specification to "retrospectively"
  fit reality.
* Unlike with the MISA idea this is *purely* at the "decode" phase:
  no internal Extension state information is permitted to be disabled,
  altered or destroyed as a direct result of writing to the
  mvendor/march-id CSRs.
* Compliance Testing may be carried out with a different vendorid/marchid
  tuple set prior to a test, allowing a vendor to claim *Certified*
  compatibility with *both* one (or more) legacy variants of the RISC-V
  Specification *and* with a present one.
* With sufficient care taken in the implementation an implementor
  may have multiple interpretations of the same binary encoding within
  an inner loop, with a single instruction (to the WARL register)
  changing the meaning.

**This is the only one of the proposals that meet the full requirements**

# Overloadable opcodes <a name="overloadable opcodes"></a>

See [[overloadable opcodes]] for full details, including a description in terms of C functions.

NOTE: under discussion.

==RB 2018-5-1 dropped IOCTL proposal for the much simpler overloadable opcodes proposal== 

The overloadable opcode (or xext) proposal allows a non standard extension to use a documented 20 + 3 bit   (or 52 + 3 bit on RV64) UUID identifier for an instruction for _software_ to use. At runtime, a cpu translates the UUID to a small implementation defined 12 + 3 bit bit identifier for _hardware_ to use. It also defines a fallback mechanism for the UUID's of instructions the cpu does not recognise.  

The overloadable opcodes proposal defines 8 standardised R-type instructions xcmd0, xcmd1, ...xcmd7 preferably in the brownfield opcode space. 
Each xcmd takes in rs1 a 12 bit "logical unit" (lun) identifying a device on the cpu that implements some "extension interface" (xintf) together with some additional data. An xintf is a set of up to 8 commands with 2 input and 1 output port (i.e. like an R-type instruction), together with a description of the semantics of the commands. Calling e.g. xcmd3 routes its two inputs and one output ports to command 3 on the device determined by the lun bits in rs1. Thus, the 8 standard xcmd instructions are standard-designated overloadable opcodes, with the non standard semantics of the opcode determined by the lun. 

Portable software, does not use luns directly. Instead, it goes through a level of indirection using a further instruction xext that translates a 20 bit globally unique identifier UUID of an xintf, to the lun of a device on the cpu that implements that xintf. The cpu can do this, because it knows (at manufacturing or boot time) which devices it has, and which xintfs they provide. This includes devices that would be described as non standard extension of the cpu if the designers had used custom opcodes instead of xintf as an interface. If the UUID of the xintf is not recognised at the current privilege level, the xext instruction returns the special lun = 0, causing any xcmd to trap. Minor variations of this scheme (requiring two more instructions) cause xcmd instructions to fallback to always return 0 or -1 instead of trapping. 

The 20 bit provided by the UUID of the xintf is much more room than provided by the 2 custom 32 bit, or even 4 custom 64/48 bit opcode spaces. Thus the overloadable opcodes proposal avoids most of the need to put a claim on opcode space and the associated collisions when combining independent extensions. In this respect it is similar to POSIX ioctls, which obviate the need for defining new syscalls to control new and nonstandard hardware.

Remark1: the main difference with a previous "ioctl like proposal" is that UUID translation is stateless and does not use resources. The xext instruction _neither_ initialises a device _nor_ builds global state identified by a cookie. If a device needs initialisation it can do this using xcmds as init and deinit instructions. Likewise, it can hand out cookies (which can include the lun) as a return value .

Remark2: Implementing devices can respond to an (essentially) arbitrary number of xintfs. Hence an implementing device can respond to an arbitrary number of commands. Organising related commands in xintfs, helps avoid UUID space pollution, and allows to amortise the (small) cost of UUID to lun translation if related commands are used in combination.

==RB not sure if this is still correct and relevant==

The proposal is functionally similar to that of the mvendor/march-id
except the non standard extension is explicit and restricted to a small set of well defined individual opcodes. 
Hence several extensions can be mixed and there is no state to be tracked over context switches. 
As such it could hypothetically be proposed as an independent Standard Extension.

Despite the proposal (which is still undergoing clarification)
being worthwhile in its own right, and standing on its own merits and
thus definitely worthwhile pursuing, it is non-trivial and more
invasive than the mvendor/march-id WARL concept.

==RB==

# Dynamic runtime hardware-adjustable custom opcode encodings <a name="dynamic_opcodes"></a>

Perhaps this is a misunderstanding, that what is being advocated
below (see link for full context):

> The best that  can be done is to allow each custom extension to have
> its opcodes  easily re positioned depending on what other custom extensions
> the  user wants available in the same program (without mode switches). 

It was suggested to use markers in the object files as a way to
identify opcodes that can be "re-encoded".  Contrast this with Jacob
Bachmeyer's original idea where the *assembly code* (only) contains
such markers (on a global world-wide unique basis, using mvendorid-marchid-isamux
tuples to do so).

<https://groups.google.com/a/groups.riscv.org/d/msg/isa-dev/Jnon96tVQD0/XuHWvduvDQAJ>

There are two possible interpretations of this:

* (1) the Hardware RTL is reconfigureable (parameterisable) to allow
  easy selection of *static* moving (adjustment) of which opcodes a
  particular instruction uses.  This runs into the same difficulties
  as outlined in other areas of this document.
* (2) the Hardware RTL contains DYNAMIC and RUN-TIME CONFIGUREABLE
  opcodes (presumably using additional CSRs to move meanings)

This would help any implementation to adjust to whatever future (official)
uses a particular encoding was selected.  It would be particularly useful
if an implementation used certain brownfield encodings.

The only downsides are:

* (1) Compiler support for dynamic opcode reconfiguration would be...
  complex.
* (2) The instruction decode phase is also made more complex, now
  involving reconfigureable lookup tables.  Whilst major opcodes
  can be easily redirected, brownfield encodings are more involved.

Compared to a stark choice of having to move (exclusively) to 48-bit
or 64-bit encodings, dynamic runtime opcode reconfiguration is
comparatively much more palatable.

In effect, it is a much more advanced version of ISAMUX/NS
(see [[isamux_isans]]).

# Comments, Discussion and analysis

TBD: placeholder as of 26apr2018

## new (old) m-a-i tuple idea

> actually that's a good point: where the user decides that they want
> to boot one and only one tuple (for the entire OS), forcing a HARDWARE
> level default m-a-i tuple at them actually prevents and prohibits them
> from doing that, Jacob.
> 
> so we have apps on one RV-Base ISA and apps on an INCOMPATIBLE (future)
> variant of RV-Base ISA.  with the approach that i was advocating (S-mode
> does NOT switch automatically), there are totally separate mtvec /
> stvec / bstvec traps.
> 
> would it be reasonable to assume the following:
> 
> (a) RV-Base ISA, particularly code-execution in the critical S-mode
> trap-handling, is *EXTREMELY* unlikely to ever be changed, even thinking
> 30 years into the future ?
> 
> (b) if the current M-mode (user app level) context is "RV Base ISA 1"
> then i would hazard a guess that S-mode is prettty much going to drop
> down into *exactly* the same mode / context, the majority of the time
> 
> thus the hypothesis is that not only is it the common code-path to *not*
> switch the ISA in the S-mode trap but that the instructions used are
> extremely unlikely to be changed between "RV Base Revisions".
> 
> foreign isa hardware-level execution
> ------------------------
> 
> this is the one i've not really thought through so much, other than it
> would clearly be disadvantageous for S-mode to be arbitrarily restricted
> to running RV-Base code (of any variant).  a case could be made that by the
> time the m-a-i tuple is switched to the foreign isa it's "all bets off",
> foreign arch is "on its own", including having to devise a means and
> method to switch back (equivalent in its ISA of m-a-i switching).
> 
> conclusion / idea
> --------------------
> 
> the multi-base "user wants to run one and only one tuple" is the key
> case, here, that is a show-stopper to the idea of hard-wiring the default
> S-mode m-a-i.
> 
> now, if instead we were to say, "ok so there should be a default S-mode
> m-a-i tuple" and it was permitted to SET (choose) that tuple, *that*
> would solve that problem.  it could even be set to the foreign isa. 
> which would be hilarious.

jacob's idea: one hart, one configuration:

>>>  (a) RV-Base ISA, particularly code-execution in the critical S-mode
>>> trap-handling, is *EXTREMELY* unlikely to ever be changed, even
>>> thinking 30 years into the future ?
>>
>> Oddly enough, due to the minimalism of RISC-V, I believe that this is
>> actually quite likely.  :-)
>>
>>>  thus the hypothesis is that not only is it the common code-path to
>>> *not* switch the ISA in the S-mode trap but that the instructions used
>>> are extremely unlikely to be changed between "RV Base Revisions".
>>>
>> Correct.  I argue that S-mode should *not* be able to switch the selected
>> ISA on multi-arch processors. 
>
> that would produce an artificial limitation which would prevent
> and prohibit implementors from making a single-core (single-hart)
> multi-configuration processor.



# Summary and Conclusion

In the early sections (those in the category "no action") it was established
in each case that the problem is not solved.  Avoidance of responsibility,
or conflation of "not our problem" with "no problem" does not make "problem"
go away.  Even "making it the Fabless Semiconductor's design problem" resulted
in a chip being *more costly to engineer as hardware **and** more costly
from a software-support perspective to maintain*... without actually
fixing the problem.

The first idea considered which could fix the problem was to just use
the pre-existing MISA CSR, however this was determined not to have
the right coverage (Standard Extensions only), and also crucially it
destroyed state.  Whilst unworkable it did lead to the first "workable"
solution, "MISA-like".

The "MISA-like" proposal, whilst meeting most of the requirements, led to
a better idea: "mvendor/march-id WARL", which, in combination with an offshoot
idea related to gcc and binutils, is the only proposal that fully meets the
requirements.

The "ioctl-like" idea *also* solves the problem, but, unlike the WARL idea
does not meet the full requirements to be "non-invasive" and "backwards
compatible" with pre-existing (pre-Standards-finalised) implementations.
It does however stand on its own merit as a way to extend the extremely
small Custom Extension opcode space, even if it itself implemented *as*
a Custom Extension into which *other* Custom Extensions are subsequently
shoe-horned.  This approach has the advantage that it requires no "approval"
from the RISC-V Foundation... but without the RISC-V Standard "approval"
guaranteeing no binary-encoding conflicts, still does not actually solve the
problem (if deployed as a Custom Extension for extending Custom Extensions).

Overall the mvendor/march-id WARL idea meets the three requirements,
and is the only idea that meets the three requirements:

* **Any proposal must be a minimal change with minimal (or zero) impact**
  (met through being purely a single backwards-compatible change to the
  wording of the specification: mvendor/march-id changes from read-only
  to WARL)
* **Any proposal should place no restriction on existing or future
  ISA encoding space**
  (met because it is just a change to one pre-existing CSR, as opposed
  to requiring additional CSRs or requiring extra opcodes or changes
  to existing opcodes)
* **Any proposal should take into account that there are existing implementors
  of the (yet to be finalised but still "partly frozen") Standard who may
  resist, for financial investment reasons, efforts to make any change
  (at all) that could cost them immediate short-term profits.**
  (met because existing implementations, with the exception of those
  that have Custom Extensions, come under the "vendor/arch-id read only
  is a formal declaration of an implementation having no Custom Extensions"
  fall-back category)

So to summarise:

* The consequences of not tackling this are severe: the RISC-V Foundation
  cannot take a back seat.  If it does, clear historical precedent shows
  100% what the outcome will be (1).
* Making the mvendorid and marchid CSRs WARL solves the problem in a
  minimal to zero-disruptive backwards-compatible fashion that provides
  indefinite transparent *forwards*-compatibility.
* The retro-fitting cost onto existing implementations (even though the
  specification has not been finalised) is zero to negligeable
  (only changes to words in the specification required at this time:
  no vendor need discard existing designs, either being designed,
  taped out, or actually in production).
* The benefits are clear (pain-free transition path for vendors to safely
  upgrade over time; no fights over Custom opcode space; no hassle for
  software toolchain; no hassle for GNU/Linux Distros)
* The implementation details are clear (and problem-free except for
  vendors who insist on deploying dozens of conflicting Custom Extensions:
  an extreme unlikely outlier).
* Compliance Testing is straightforward and allows vendors to seek and
  obtain *multiple* Compliance Certificates with past, present and future
  variants of the RISC-V Standard (in the exact same processor,
  simultaneously), in order to support end-customer legacy scenarios and
  provide the same with a way to avoid "impossible-to-make" decisions that
  throw out ultra-costly multi-decade-investment in proprietary legacy
  software at the same as the (legacy) hardware.

-------

# Conversation Exerpts

The following conversation exerpts are taken from the ISA-dev discussion

## (1) Albert Calahan on SPE / Altiven conflict in POWERPC

> Yes. Well, it should be blocked via legal means. Incompatibility is
> a disaster for an architecture.
>
> The viability of PowerPC was badly damaged when SPE was
> introduced. This was a vector instruction set that was incompatible
> with the AltiVec instruction set. Software vendors had to choose,
> and typically the choice was "neither". Nobody wants to put in the
> effort when there is uncertainty and a market fragmented into
> small bits.
>
> Note how Intel did not screw up. When SSE was added, MMX remained.
> Software vendors could trust that instructions would be supported.
> Both MMX and SSE remain today, in all shipping processors. With very
> few exceptions, Intel does not ship chips with missing functionality.
> There is a unified software ecosystem.
>
> This goes beyond the instruction set. MMU functionality also matters.
> You can add stuff, but then it must be implemented in every future CPU.
> You can not take stuff away without harming the architecture.

## (2) Luke Kenneth Casson Leighton on Standards backwards-compatibility

> For the case where "legacy" variants of the RISC-V Standard are
> backwards-forwards-compatibly supported over a 10-20 year period in
> Industrial and Military/Goverment-procurement scenarios (so that the
> impossible-to-achieve pressure is off to get the spec ABSOLUTELY
> correct, RIGHT now), nobody would expect a seriously heavy-duty amount
> of instruction-by-instruction switching: it'd be used pretty much once
> and only once at boot-up (or once in a Hypervisor Virtual Machine
> client) and that's it.

## (3) Allen Baum on Standards Compliance

> Putting my compliance chair hat on: One point that was made quite
> clear to me is that compliance will only test that an implementation
> correctly implements the portions of the spec that are mandatory, and
> the portions of the spec that are optional and the implementor claims
> it is implementing. It will test nothing in the custom extension space,
> and doesn't monitor or care what is in that space.

## (4) Jacob Bachmeyer on explaining disambiguation of opcode space

> ...have different harts with different sets of encodings.)  Adding a "select"
> CSR as has been proposed does not escape this fundamental truth that
> instruction decode must be unambiguous, it merely expands every opcode with
> extra bits from a "select" CSR.

## (5) Krste Asanovic on clarification of use of opcode space

> A CPU is even free to reuse some standard extension encoding space for
> non-standard extensions provided it does not claim to implement that
> standard extension.

## (6) Clarification of difference between assembler and encodings

> > The extensible assembler database I proposed assumes that each processor
> > will have *one* and *only* one set of recognized instructions.  (The "hidden
> > prefix" is the immutable vendor/arch/impl tuple in my proposals.) 
>
>  ah this is an extremely important thing to clarify, the difference
> between the recognised instruction assembly mnemonic (which must be
> globally world-wide accepted as canonical) and the binary-level encodings
> of that mnemonic used different vendor implementations which will most
> definitely *not* be unique but require "registration" in the form of
> atomic acceptance as a patch by the FSF to gcc and binutils [and other
> compiler tools].


# References

* <https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/7bbwSIW5aqM>
* <https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/InzQ1wr_3Ak%5B1-25%5D>
* Review mvendorid-marchid WARL <https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/Uvy9paXN1xA>