openocd_ft232.cfg

   1 #debug_level 4
   2
   3 adapter driver ft232r
   4 adapter speed 5
   5 #ft232r_serial_desc 8a57J1X4
   6
   7
   8 adapter_nsrst_delay 100
   9 jtag_ntrst_delay 100
  10
  11
  12 # this should be irlen=4
  13 jtag newtap libresoc tap -irlen 4 -irmask 0xf -ircapture 0xf -expected-id 0x000018ff
  14
  15 #set _TARGETNAME libresoc.tap
  16 #target create $_TARGETNAME.0 ppc64 -chain-position $_TARGETNAME -rtos hwthread
  17
  18 # Configure work area in on-chip SRAM
  19 #$_TARGETNAME.0 configure -work-area-phys 0x80000000 \
  20 #               -work-area-size 1000 -work-area-backup 0
  21