radeonsi: release saved resources in si_retile_dcc

Fixes: 1f21396431a ("radeonsi: add support for displayable DCC for multi-RB chips")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2330
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

main: fix coverity error in _mesa_program_resource_find_name()

We did not take into account if name is NULL, so we could dereference
a NULL pointer in strncmp() call.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

panfrost: Add negative lod bias support

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

virgl/drm: update UAPI

This seems to compile. Header copied over from drm-misc-next
7da5492739db.

Acked-by: Eric Engestrom <eric@engestrom.ch>

lima: drop support for R8G8B8 format

We can only sample from 24-bit packed format and can't render into it and
it causes chromium-based browsers to fail when they create FBO with GL_RGB
format. Drop R8G8B8 alltogether so mesa can promote it to RGBX format.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

anv: Re-use flush_descriptor_sets in flush_compute_state

There's no reason to hand-roll all of the memory re-allocation fall-back
code for compute shaders.  It's  just duplicated complexity.  This also
makes it more clear in flush_compute_state where the
MEDIA_INTERFACE_DESCRIPTOR_LOAD command gets emitted relative to other
packets in the command stream.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Flag descriptors dirty when gl_NumWorkgroups is used

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

anv: Don't add dynamic state base address to push constants on Gen7

Because Gen7 push constants are already relative to dynamic state base
address, they aren't really an address.  It's deceptive to return an
address from the helper function.  Instead, let's leave it as a
special-case in the gen7-11 helper; we don't need the helper for code
de-duplication for Gen7 anyway.

Fixes: 67d2cb3e9367a "anv: Add get_push_range_address() helper"
Closes: #2323
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

lima: add debug flag to disable tiling

Add debug flag to disable tiling. Note that it prevents lima from creating
tiled buffers, but it's still able to import them if modifier is specified

Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

lima: use linear layout for shared buffers if modifier is not specified

Use linear layout for shared buffers if modifier is not specified
and use linear layout when importing buffers with invalid modifier.

Fixes: 01a451b04d2d ("lima: handle DRM_FORMAT_MOD_INVALID in resource_from_handle()")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

glsl: call calculate_subroutine_compat() from the nir linker

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: move calculate_subroutine_compat() to shared linker code

We will make use of this in the nir linker in the following patch.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: call uniform resource checks from the nir linker

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: move uniform resource checks into the common linker code

We will call this from the nir linker in the following patch.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: call check_subroutine_resources() from the nir linker

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: move check_subroutine_resources() into the shared util code

We will make use of this in the nir linker in the following patch.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

genxml: Remove a non-existant HW bit

ir3: Set up full/half register conflicts correctly

Setting up transitive conflicts between a full register and its two
half registers (eg r0.x and hr0.x and hr0.y) will make the half
registers conflict.  They don't actually conflict and this prevents us
from using both at the same time.

Add and use a new ra helper that sets up transitive conflicts between
a register and its subregisters, except it carefully avoids the
subregister conflict.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>

llvmpipe: add ARB_derivative_control support

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

radeonsi/gfx9: force the micro tile mode for MSAA resolve correctly on gfx9

Fixes: 69ea473 "amd/addrlib: update to the latest version"
Closes: #2325
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

anv: fix intel perf queries availability writes

The availability is not written at the location changed in
ee6fbb95a74d...

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: ee6fbb95a74d ("anv: Properly handle host query reset of performance queries")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

docs: Add release notes for 19.3.2, update calendar and home page

docs: add SHA256 sums for 19.3.2

docs: Add release notes for 19.3.2

radeon/vcn: Handle crop parameters for encoder

Set proper cropping parameter if frame cropping is enabled

Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Reviewed-by: Boyuan Zhang boyuan.zhang@amd.com
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3328>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3328>

nir: fix printing of var_decl with more than 4 components.

Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Fixes: a8ec4082a41830cf67a4fd405402fd2d820722fd ('nir+vtn: vec8+vec16 support')
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3320>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3320>

radv: advertise VK_AMD_shader_image_load_store_lod

This extension allows to use LOD with image read/write operations.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: handle nir_intrinsic_image_deref_{load,store} with lod

Use image_load_mip and image_store_mip respectively if the lod
parameter isn't zero.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd/llvm: handle nir_intrinsic_image_deref_{load,store} with lod

Use image_load_mip and image_store_mip respectively if the lod
parameter isn't zero.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

spirv,nir: add new lod parameter to image_{load,store} intrinsics

SPV_AMD_shader_image_load_store_lod allows to use a lod parameter
with OpImageRead, OpImageWrite and OpImageSparseRead.

According to the specification, this parameter should be a 32-bit
integer. It is initialized to 0 when no lod parameter is found
during SPIR-V->NIR translation.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

spirv: add SpvCapabilityImageReadWriteLodAMD

New SPIR-V capability for SPV_AMD_shader_image_load_store_lod.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

mesa: create program resource hash in a single place

This is a cleanup but also a fix for commit dd09f1d806b. In case of
i965 we did not actually create hash for cached shader programs.

Fixes: dd09f1d806b "mesa/st/i965: add a ProgramResourceHash for quicker resource lookup"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

llvmpipe: add support for ARB_indirect_parameters.

This just adds support for getting the draw count from the
indirect buffer.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3234>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3234>

llvmpipe: enable driver side multi draw indirect

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3234>

gallium/util: add multi_draw_indirect to util_draw_indirect.

ARB_indirect_parameters needs drivers to deal with mutli_draw_indirect
themselves.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3234>

mesa: Prevent _MaxLevel from being less than zero

When decoding using VDPAU, the _MaxLevel value becomes -1 due to
NumLevels being equal to 0 at a certain point, and decoding fails
due to an assertion later on.

Signed-off-by: Thong Thai <thong.thai@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>

ac: add ac_build_s_endpgm

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: add 128-bit bitcount

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac/gpu_info: add pc_lines and use it in radeonsi

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: unify primitive export code

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: unify build_sendmsg_gs_alloc_req

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: clean up messy si_emit_rasterizer_prim_state

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: determine accurately if line stippling is enabled for performance

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: test polygon mode enablement accurately

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: fix context roll tracking in si_emit_shader_vs

probably harmless, because we don't need to track context rolls on gfx10

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: fix monolithic pixel shaders with two-sided colors and SampleMaskIn

They are never used except for testing AMD_DEBUG=mono.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac/gpu_info: always use distributed tessellation on gfx10

This might fix a hang on Navi14.

Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

gallium: bypass u_vbuf if it's not needed (no fallbacks and no user VBOs)

This decreases CPU overhead, because u_vbuf is completely bypassed
in those cases.

Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

gallium/cso_context: move non-vbuf vertex buffer and element code into helpers

These will be reused.

Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

gallium: put u_vbuf_get_caps return values into u_vbuf_caps

Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

etnaviv: remove unnecessary vertex_elements_state_create error checking

PIPE_CAP_MAX_VERTEX_BUFFERS already sets the maximum vertex_buffer_index.

There's no need to error on num_elements == 0 (if that can even happen).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: implement gl_VertexID/gl_InstanceID

Fixes:
dEQP-GLES3.functional.instanced.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: HALTI2+ instanced draw

Fixes:
dEQP-GLES3.functional.draw.draw_arrays_instanced.*
dEQP-GLES3.functional.draw.draw_elements_instanced.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: update headers from rnndb

Update to etna_viv commit 46af5f1d.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

anv: don't close invalid syncfd semaphore

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

gallium/swr: Fix glVertexPointer race condition.

Sometimes using user buffer (not VBO) e.g. glVertexPointer
one thread could free memory before other thread used it.
Instead of copying this memory to driver simplier thing is
to block until draw finish.

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

intel/disasm: Fix decoding of src0 of SENDS

There is no instruction field for the register file for src0 because
it's always GRF.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3309>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3309>

meta: Add cleanup function for Bitmap

Buffer object and temporary texture were never freed, causing memory leaks.

Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

nir/spirv: skip unreachable blocks in Phi second pass

Only the blocks that are reachable are inserted with an end_nop
instruction at the end.

When handling the Phi second pass, if the Phi has a parent block that
does not have an end_nop then it means this block is unreachable, and
thus we can ignore it, as the Phi will never come through it.

Fixes dEQP-VK.graphicsfuzz.uninit-element-cast-in-loop.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

radeonsi: check ctx->sdma_cs before using it

e5167a9276de1f383888714b41d3a9be2b9c1da9 disabled SDMA for gfx8.
This caused 3 piglit arb_sparse_buffer tests (basic, buffer-data
and commit) to crash on GFX8.

Reported-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes: e5167a9276d ("radeonsi: disable SDMA on gfx8 to fix corruption on RX 580")

radv: do not fill keys from fragment shader twice

radv_fill_shader_info() already does that.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

main: allow external textures for BindImageTexture

From issue 10 of the OES_EGL_image_external_essl3:

  A limited set of use-cases is enabled by making glBindImageTexture
  accept external textures. Shaders can access such external textures
  using the existing <image2D> sampler type.

Fixes: 02a6d901eee ("mesa: add OES_EGL_image_external_essl3 support")
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

intel/nir: Add a memory barrier before barrier()

Our barrier instruction does not implicitly do a memory fence but the
GLSL barrier() intrinsic is supposed to.  The easiest back-portable
solution is to just add the NIR barriers.  We'll sort this out more
properly in later commits.

Cc: mesa-stable@lists.freedesktop.org
Closes: #2138
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

radv: Emit a BATCH_BREAK when changing pixel shaders or CB_TARGET_MASK.

Fixes a hang on Raven with Resident Evil 2.

I did not find anything more restricted to fix it:

- Setting persistent_states_per_bin to 1 fixes it too,
  but likely does an internal break on any descriptor set changes
  too.
- Only breaking the batch when cb_target_mask changes does not fix
  it (and looking at AMDVLK comments, I suspect the code in radeonsi
  should really be doing a FLUSH_DFSM).
- Always doing a FLUSH_DFSM on shader switch helps, but that is more
  often than this and I don't think we should be doing that when DFSM
  is disabled.
- Also emitting the existing break on framebuffer change when DFSM is
  disabled does not fix the issue.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2315
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

mesa/st/i965: add a ProgramResourceHash for quicker resource lookup

Many resource APIs require searching by name, add a hash table to make
this faster. Currently we traverse the whole resource list for name
based queries, this change makes all these cases use the hash.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2203
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3254>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3254>

gitlab-ci: Test against LLVM / clang 9 on x86

They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.

In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.

panfrost: Don't double-flip Z/W for 2D arrays

We need to mindful that we don't clobber the shadow comparator.

Fixes dEQP-GLES3.functional.shaders.texture_functions.texture.sampler2darrayshadow_*

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

pan/midgard: Account for z/w flip in texelFetch

Required for proper txf of 2D arrays.

Fixes dEQP-GLES3.functional.shaders.texture_functions.texelfetch.*2darray*

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Adjust for mismatch between hardware/Gallium in arrays/cube

The hardware separates face selection and array indexing, it looks like,
whereas Gallium smushes them together with some modulus fun. Let's fix
it so mipmapped 2D arrays work without regressing cubemaps.

Fixes dEQP-GLES3.functional.texture.filtering.2d_array.* among others.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Respect constant buffer_offset

Fixes dEQP-GLES3.functional.ubo.multi_basic_types.single_buffer.* among
others

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

glsl: use nir version of check_image_resources() for nir linker

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: add check_image_resources() for the nir linker

This is adapted from the GLSL IR code but doesn't need to
iterate over the IR. I believe this also fixes a potential bug in
the GLSL IR code which potentially counts the same output twice.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: use nir linker to link atomics

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

mesa: add new UseNIRGLSLLinker constant

This will be used to disable some GLSL IR passes in following
patches.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: reorder link_and_validate_uniforms() calls

This is required for the following commit.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: add new gl_nir_link_glsl() helper

This will allow us to do some linking in NIR that was previously
done by the GLSL IR linker. To start with this just has calls for
linking atomics.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: add gl_nir_link_check_atomic_counter_resources()

This is pretty much a copy of link_check_atomic_counter_resources()
updated to work with the NIR linker.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

glsl: rename gl_nir_link() to gl_nir_link_spirv()

A NIR based glsl linking function will be too different to the
spirv version to bother attempting any sharing. So lets change
the name to be explicit.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

st/mesa: Lower vars to ssa and constant prop before gl_nir_lower_buffers

The gl_nir_lower_buffers pass relies on recognizing the same literal
constants as the GLSL compiler so that constant buffer array indices
are constant in nir as well.  Without this, get_block_array_index()
would see

  vec1 32 ssa_723 = deref_var &const_temp@1 (function_temp int)
  vec1 32 ssa_724 = load_const (0x00000001 /* 0.000000 */)
  ...
  vec1 32 ssa_5 = deref_var &const_temp@1 (function_temp int)
  vec1 32 ssa_6 = intrinsic load_deref (ssa_5) (0) /* access=0 */
  vec1 32 ssa_7 = deref_var &blockB (ssbo BlockB[1])
  vec1 32 ssa_8 = deref_array &(*ssa_7)[ssa_6] (ssbo BlockB) /* &blockB[ssa_6] */

instead of a literal 1, and ultimately generate the block name
BlockB[0].  That used to work, since we before the previous commits
we'd compact the block binding points and names. Thus, there would
always be a BlockB[0].

Now, if an entry in a block array isn't used, we don't generate that
block name, which means that if entry 0 isn't used BlockB[0] isn't
present and then get_block_array_index() fails to find the block.

In most cases we would have dealt with this in the call to
st_nir_opts() in st_nir_link_shaders(), but in the num_shaders == 1
case (for example, compute) we would call gl_nir_lower_buffers()
before we lowered GLSL constants.  Move that corner case up next to
where we call st_nir_link_shaders() so we call st_nir_opts() at the
same point in the flow for all shaders.

Fixes: dEQP-GLES31.functional.ssbo.layout.random.all_per_block_buffers.18
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl/nir: do not change an element index to have correct block name

When SSBO array is used with packed layout, both IR tree
and as a result, NIR tree will be incorrect.
In fact, the SSBO dereference indices won't
match the array size in some cases like the following:

"layout(packed, binding=1) buffer SSBO { vec4 a; } ssbo[3];
 out vec4 color;
 void main() {
   color = ssbo[2].a;
 }"

After linking the IR and then NIR will have an SSBO array
definition with size 1 but dereference still will have index 2
and linked_shader->Program->sh.ShaderStorageBlocks
will contain just SSBO with name "SSBO[2]"

So this line should be removed at least as a workaround for now
to avoid error like:
Failed to find the block by name "SSBO[0]"

Fixes: 810dde2a "glsl/nir: Add a pass to lower UBO and SSBO access"
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

glsl: fix a binding points assignment for ssbo/ubo arrays

This is needed to be in agreement with spec requirements:
https://github.com/KhronosGroup/OpenGL-API/issues/46

Piers Daniell:
   "We discussed this in the OpenGL/ES working group meeting
    and agreed that eliminating unused elements from the interface
    block array is not desirable. There is no statement in the spec
    that this takes place and it would be highly implementation
    dependent if it happens. If the application has an "interface"
    in the shader they need to match up with the API it would be
    quite confusing to have the binding point get compacted.
    So the answer is no, the binding points aren't affected by
    unused elements in the interface block array."

v2: - 'original_dim_size' field moved above to keep
      the struct packed better on 64-bit
    - added a comment for 'total_num_array_elements' field
    - fixed a binding point calculations for SSBOs array of arrays
          ( Ian Romanick <ian.d.romanick@intel.com> )
    - fixed binding point calculations for non-packed SSBOs
v3:
    - rename 'total_num_array_elements' to 'aoa_size'
          ( Jason Ekstrand <jason@jlekstrand.net> )
    - rename 'boffset' to 'binding_stride'
          ( Alejandro Piñeiro <apinheiro@igalia.com> )

Fixes: 8cf1333b "glsl: link uniform block arrays of arrays"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109532
Reported-By: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

glsl: fix an incorrect max_array_access after optimization of ssbo/ubo

This is needed to fix these tests:
piglit.spec.arb_shader_storage_buffer_object.compiler.unused-array-element_frag
piglit.spec.arb_shader_storage_buffer_object.compiler.unused-array-element_comp

Fixes: 8cf1333b "glsl: link uniform block arrays of arrays"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109532
Reported-By: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>

radeonsi: remove TGSI

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: disable SDMA on gfx8 to fix corruption on RX 580

Closes: #1399
Closes: #1889
Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: move SI and CIK+ SDMA code into 1 common function for cleanups

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: rename dma_cs -> sdma_cs

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: add AMD_DEBUG=nodmacopyimage for debugging

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: add AMD_DEBUG=nodmaclear for debugging

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: remove broken and unused SI SDMA image copy code

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

radeonsi: rename SDMA debug flags

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>

gitlab-ci: Switch LAVA jobs to use shared dEQP runner

Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.

The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

gitlab-ci: Update kernel for LAVA to 5.5-rc1 plus fixes

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

panfrost: Handle PIPE_FORMAT_R10G10B10A2_USCALED

Same format code as UINT... might be different in how it's fed into a
shader but we'll deal with that when we get there.

Fixes dEQP-GLES3.functional.vertex_arrays.single_attribute.output_types.usigned_int2_10_10_10.components4_vec2_quads1

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Report MSAA 4x supported for dEQP

Fixes dEQP-GLES3.functional.state_query.integers.max_samples_getinteger64

We'll have to actually implement multisampling next, but hey.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Cleanup tiling selection logic

Make it a lot more obvious what we're doing and fix more than a few
corner cases in the process.

Fixes
dEQP-GLES3.functional.buffer.map.write.render_as_index_array.pixel*, and
likely others.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Implement sRGB blend shaders

We use the lowering in nir_format_convert. There are native ops for this
so this is far from optimal and not remotely efficient but as with most
blend shader things right now, it's hard enough to get it working, so
let's focus on that for now. We'll make it fast later (once we have
GLES3 stable, we can start optimizing these things).

Fixes dEQP-GLES3.functional.fragment_ops.blend.fbo_srgb.*

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Support rendering to non-zero Z/S layers

Fixes abort in STK's shadow implementation.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost: Texture from Z32F_S8 as R32F

Z32F_S8 becomes Z32F in texturing, which in turn just becomes R32F.

Fixes dEQP-GLES3.functional.texture.format.sized.*.depth32f_stencil8*

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

iris/query: Implement PIPE_QUERY_GPU_FINISHED

Implementation is similar to radeonsi in 5f1cef76

Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/mesa: use uint-samplers for sampling stencil buffers

Otherwise, we end up mismatching the sampler types when rendering.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>