from nmigen import Module, Signal
-from nmigen.back.pysim import Simulator, Delay, Settle
+from nmigen.sim import Simulator, Delay, Settle
import sys
import getopt
+import struct
from openpower.decoder.power_decoder import create_pdecode
from openpower.decoder.power_decoder2 import (PowerDecode2)
from openpower.simulator.program import Program
from openpower.decoder.selectable_int import SelectableInt
from openpower.decoder.orderedset import OrderedSet
from openpower.decoder.isa.all import ISA
+from openpower.util import log
+from openpower.simulator.qemu import run_program
+def read_data(fname, offset=0):
+ """reads binary data and returns a dictionary of address: contents,
+ each entry is 8 bytes: input file *must* contain a multiple of 8 bytes.
+ data to be considered *binary* (raw)
+ """
+ res = {}
+ with open(fname, "rb") as f:
+ while True:
+ b = f.read(8)
+ log (repr(b))
+ if not b:
+ return res
+ res[offset] = struct.unpack('<Q', b)[0] # unsigned long
+ offset += 8
+
+def write_data(mem, fname, offset, sz):
+ """writes binary data to a file, each entry must be 8 bytes
+ """
+ with open(fname, "wb") as f:
+ for i in range(0, sz, 8):
+ addr = offset + i
+ val = mem.ld(addr, 8)
+ f.write(struct.pack('>Q', val)) # unsigned long
+
+def sim_check_data(simulator, qemu, check_addr, msg):
+ addr = check_addr & ~0x7 # align
+ sim_data = simulator.mem.ld(addr, 8, swap=False)
+ qdata = qemu.get_mem(addr, 8)[0]
+ log ("last", msg, hex(check_addr), hex(sim_data), hex(qdata))
+ if sim_data != qdata:
+ log("expect mem %x, %x got %x" % (addr, qdata, sim_data))
+ exit(0)
+
def convert_to_num(num):
# detect number types
if num.isdigit():
start with "0x" or "0b" for hex or binary
"""
regs = {}
+ allints = True
with open(fname) as f:
for line in f.readlines():
+ # split out comments
+ if line.startswith("#"):
+ continue
+ line = line.split("#")[0]
# split line "x : y" into ["x", "y"], remove spaces
line = list(map(str.strip, line.strip().split(":")))
assert len(line) == 2, "regfile line must be formatted 'x : y'"
reg = convert_to_num(reg)
val = convert_to_num(val)
assert reg not in regs, "duplicate entry %s" % (repr(reg))
+ allints = allints and isinstance(reg, int)
regs[reg] = val
+ # SPRs can be named
+ if not allints:
+ return regs
+
# post-process into a list.
if listqty is None:
return regs
return result
-def run_tst(args, generator, initial_regs,
+def qemu_register_compare(sim, q, regs, fprs):
+ qpc, qxer, qcr, qlr = q.get_pc(), q.get_xer(), q.get_cr(), q.get_lr()
+ sim_cr = sim.cr.value
+ sim_pc = sim.pc.CIA.value
+ sim_xer = sim.spr['XER'].value
+ sim_lr = sim.spr['LR'].value
+ print("qemu pc", hex(qpc))
+ print("qemu cr", hex(qcr))
+ print("qemu lr", hex(qlr))
+ print("qemu xer", bin(qxer))
+ print("sim nia", hex(sim.pc.NIA.value))
+ print("sim pc", hex(sim.pc.CIA.value))
+ print("sim cr", hex(sim_cr))
+ print("sim xer", hex(sim_xer))
+ print("sim lr", hex(sim_lr))
+ #self.assertEqual(qpc, sim_pc)
+ for reg in regs:
+ qemu_val = q.get_gpr(reg)
+ sim_val = sim.gpr(reg).value
+ if qemu_val != sim_val:
+ log("expect gpr %d %x got %x" % (reg, qemu_val, sim_val))
+ #self.assertEqual(qemu_val, sim_val,
+ # "expect %x got %x" % (qemu_val, sim_val))
+ for fpr in fprs:
+ qemu_val = q.get_fpr(fpr)
+ sim_val = sim.fpr(fpr).value
+ if qemu_val != sim_val:
+ log("expect fpr %d %x got %x" % (fpr, qemu_val, sim_val))
+ #self.assertEqual(qemu_val, sim_val,
+ # "expect %x got %x" % (qemu_val, sim_val))
+ #self.assertEqual(qcr, sim_cr)
+
+
+def run_tst(args, generator, qemu,
+ initial_regs,
initial_sprs=None, svstate=0, mmu=False,
initial_cr=0, mem=None,
- initial_fprs=None):
+ initial_fprs=None,
+ initial_pc=0):
if initial_regs is None:
initial_regs = [0] * 32
if initial_sprs is None:
initial_sprs = {}
+ if qemu:
+ log("qemu program", generator.binfile.name)
+ qemu = run_program(generator, initial_mem=mem,
+ bigendian=False, start_addr=initial_pc,
+ continuous_run=False, initial_sprs=initial_sprs,
+ initial_regs=initial_regs, initial_fprs=initial_fprs)
+ for reg, val in qemu._get_registers().items():
+ log ("qemu reg", reg, hex(val))
+ if True:
+ offs, length = 0x200000, 0x200
+ qmem = qemu.get_mem(offs, length)
+ log("qemu mem pre-dump", hex(offs), length)
+ for i, data in enumerate(qmem):
+ log(hex(offs+i*8), hex(data))
+
m = Module()
comb = m.d.comb
instruction = Signal(32)
pdecode = create_pdecode(include_fp=initial_fprs is not None)
gen = list(generator.generate_instructions())
- print ("instructions gen", gen)
+ log ("instructions gen", gen)
insncode = generator.assembly.splitlines()
if insncode:
instructions = list(zip(gen, insncode))
else:
instructions = gen
- print ("instructions", instructions)
+ log ("instructions", instructions)
m.submodules.pdecode2 = pdecode2 = PowerDecode2(pdecode)
simulator = ISA(pdecode2, initial_regs, initial_sprs, initial_cr,
- initial_insns=gen, respect_pc=True,
+ initial_insns=(initial_pc, gen), respect_pc=True,
initial_svstate=svstate,
initial_mem=mem,
+ initial_pc=initial_pc,
fpregfile=initial_fprs,
disassembly=insncode,
bigendian=0,
yield pdecode2.dec.bigendian.eq(0) # little / big?
pc = simulator.pc.CIA.value
index = pc//4
- while index < len(instructions):
- print("instr pc", pc)
- try:
- yield from simulator.setup_one()
- except KeyError: # indicates instruction not in imem: stop
- break
+
+ # rather awkward: qemu will go wonky if stepped over the
+ # last instruction. use ISACaller to check if this is
+ # the last instruction, and leave qemu pointing at it
+ # rather than trigger an exception in the remote-qemu program
+ try:
+ _pc, _ins = simulator.get_next_insn()
+ except KeyError: # indicates instruction not in imem: stop
+ return
+
+ while not simulator.halted:
+ log("instr pc", pc)
+ yield from simulator.setup_next_insn(_pc, _ins)
yield Settle()
- ins = instructions[index]
- if isinstance(ins, list):
- ins, code = ins
- print(" 0x{:X}".format(ins & 0xffffffff))
- opname = code.split(' ')[0]
- print(code, opname)
- else:
- print(" 0x{:X}".format(ins & 0xffffffff))
+ if False:
+ ins = instructions[index]
+ if isinstance(ins, list):
+ ins, code = ins
+ log(" 0x{:X}".format(ins & 0xffffffff))
+ opname = code.split(' ')[0]
+ log(code, opname)
+ else:
+ log(" 0x{:X}".format(ins & 0xffffffff))
# ask the decoder to decode this binary data (endian'd)
yield from simulator.execute_one()
- pc = simulator.pc.CIA.value
- index = pc//4
+ #pc = simulator.pc.CIA.value
+ #index = pc//4
+
+ if not qemu:
+ try:
+ _pc, _ins = simulator.get_next_insn()
+ except KeyError: # indicates instruction not in imem: stop
+ return
+ continue
+
+ # check qemu co-sim: run one instruction, but first check
+ # in ISACaller if there *is* a next instruction. if there
+ # is, "recover" qemu by switching bigendian back
+ try:
+ _pc, _ins = simulator.get_next_insn()
+ except KeyError: # indicates instruction not in imem: stop
+ _pc, _insn = (None, None)
+ qemu.step()
+ if not _pc or simulator.halted:
+ qemu.set_endian(False)
+ qemu_register_compare(simulator, qemu, range(32), range(32))
+ # check last store address
+ check_addr = None
+ if simulator.last_st_addr is not None:
+ check_addr = simulator.last_st_addr
+ msg = "st"
+ if simulator.last_ld_addr is not None:
+ check_addr = simulator.last_ld_addr
+ msg = "ld"
+ if check_addr is not None:
+ sim_check_data(simulator, qemu, check_addr, msg)
+ sim_check_data(simulator, qemu, 0x600800, "dbgld")
+ if _pc is None:
+ break
sim.add_process(process)
sim.run()
- return simulator
+ return simulator, qemu
def help():
- print ("TODO help")
+ print ("-i --binary= raw (non-ELF) bare metal executable, loaded at 0x0")
+ print ("-a --listing= file containing bare-metal assembler (no macros)")
+ print ("-g --intregs= colon-separated file with GPR values")
+ print ("-f --fpregs= colon-separated file with FPR values")
+ print ("-s --spregs= colon-separated file with SPR values")
+ print ("-l --load= filename:address to load binary into memory")
+ print ("-d --dump= filename:address:len to binary save from memory")
+ print ("-q --qemu= run qemu co-simulation")
+ print ("-p --pc= set initial program counter")
+ print ("-h --help prints this message")
+ print ("notes:")
+ print ("load and dump may be given multiple times")
+ print ("load and dump must be 8-byte aligned sizes")
+ print ("loading SPRs accepts SPR names (e.g. LR, CTR, SRR0)")
+ print ("numbers may be integer, binary (0bNNN) or hex (0xMMM) but not FP")
+ print ("running ELF binaries: load SPRs, LR set to 0xffffffffffffffff")
+ print ("TODO: dump registers")
+ print ("TODO: load/dump PC, MSR, CR")
+ print ("TODO: print exec and sub-exec counters at end")
exit(-1)
def run_simulation():
binaryname = None
- initial_regs = None
- initial_fprs = None
+ initial_regs = [0]*128
+ initial_fprs = [0]*128
initial_sprs = None
+ initial_mem = {}
+ initial_pc = 0x0
lst = None
+ qemu_cosim = False
+ write_to = []
try:
- opts, args = getopt.getopt(sys.argv[1:], "i:l:g:f:s:",
- ["binary", "listing",
- "intregs", "fpregs", "sprs"])
-
+ opts, args = getopt.getopt(sys.argv[1:], "qhi:a:g:f:s:l:d:p:",
+ ["qemu", "help", "pc=",
+ "binary=", "listing=",
+ "intregs=", "fpregs=", "sprs=",
+ "load=", "dump="])
+
except:
sys.stderr.write("Command-line Error\n")
help()
for opt, arg in opts:
- if opt in ['-i', '--binary']:
+ if opt in ['-h', '--help']:
+ help()
+ elif opt in ['-q', '--qemu']:
+ qemu_cosim = True
+ elif opt in ['-i', '--binary']:
binaryname = arg
- elif opt in ['-l', '--listing']:
+ elif opt in ['-p', '--pc']:
+ initial_pc = convert_to_num(arg)
+ elif opt in ['-a', '--listing']:
lst = arg
elif opt in ['-g', '--intregs']:
- initial_regs = read_entries(arg, 32)
+ initial_regs = read_entries(arg, 128)
elif opt in ['-f', '--fpregs']:
- initial_fprs = read_entries(arg, 32)
+ initial_fprs = read_entries(arg, 128)
elif opt in ['-s', '--sprs']:
initial_sprs = read_entries(arg, 32)
+ elif opt in ['-l', '--load']:
+ arg = list(map(str.strip, arg.split(":")))
+ if len(arg) == 1:
+ fname, offs = arg[0], 0
+ else:
+ fname, offs = arg
+ offs = convert_to_num(offs)
+ log ("offs load", fname, hex(offs))
+ mem = read_data(fname, offs)
+ initial_mem.update(mem)
+ elif opt in ['-d', '--dump']:
+ arg = list(map(str.strip, arg.split(":")))
+ assert len(arg) == 3, \
+ "dump '%s' must contain file:offset:length" % repr(arg)
+ fname, offs, length = arg
+ offs = convert_to_num(offs)
+ length = convert_to_num(length)
+ assert length % 8 == 0, "length %d must align on 8-byte" % length
+ log ("dump", fname, offs, length)
+ write_to.append((fname, offs, length))
+
+ log (initial_mem)
if binaryname is None and lst is None:
sys.stderr.write("Must give binary or listing\n")
with open(binaryname, "rb") as f:
lst = f.read()
- with Program(lst, bigendian=False) as prog:
- simulator = run_tst(None, prog,
+ with Program(lst, bigendian=False, orig_filename=binaryname) as prog:
+ simulator, qemu = run_tst(None, prog, qemu_cosim,
initial_regs,
initial_sprs=initial_sprs,
svstate=0, mmu=False,
- initial_cr=0, mem=None,
- initial_fprs=initial_fprs)
+ initial_cr=0, mem=initial_mem,
+ initial_fprs=initial_fprs,
+ initial_pc=initial_pc)
print ("GPRs")
simulator.gpr.dump()
print ("FPRs")
simulator.fpr.dump()
print ("SPRs")
simulator.spr.dump()
-
+ print ("Mem")
+ simulator.mem.dump()
+
+ for fname, offs, length in write_to:
+ write_data(simulator.mem, fname, offs, length)
+ if qemu:
+ qmem = qemu.get_mem(offs, length)
+ log("qemu mem", hex(offs), length)
+ for i, mem in enumerate(qmem):
+ log(hex(offs+i*8), hex(mem))
+ if qemu:
+ log("final complete qemu reg dump")
+ for reg, val in qemu._get_registers().items():
+ log ("qemu reg", reg, hex(val))
+
+ # cleanup
+ if qemu:
+ qemu.exit()
if __name__ == "__main__":
run_simulation()