from nmigen import Module, Signal
-from nmigen.back.pysim import Simulator, Delay, Settle
+from nmigen.sim import Simulator, Delay, Settle
from nmutil.formaltest import FHDLTestCase
import unittest
from openpower.decoder.isa.caller import ISACaller
self.assertEqual(sim.gpr(i), SelectableInt(expected[i], 64))
def test_sv_fpload(self):
- """>>> lst = ["sv.lfsx 2.v, 0, 0.v"
+ """>>> lst = ["sv.lfsx *2, 0, *0"
]
"""
- lst = SVP64Asm(["sv.lfsx 2.v, 0, 0.v"
+ lst = SVP64Asm(["sv.lfsx *2, 0, *0"
])
lst = list(lst)
# SVSTATE (in this case, VL=2)
svstate = SVP64State()
- svstate.vl[0:7] = 2 # VL
- svstate.maxvl[0:7] = 2 # MAXVL
- print ("SVSTATE", bin(svstate.spr.asint()))
+ svstate.vl = 2 # VL
+ svstate.maxvl = 2 # MAXVL
+ print ("SVSTATE", bin(svstate.asint()))
# memory addresses 0x0000 and 0x0008
initial_mem = {0x0000: (0x42013333, 8), # 32.3
self.assertEqual(sim.fpr(3), SelectableInt(0xC004000000000000, 64))
def test_fp_single_ldst(self):
- """>>> lst = ["sv.lfsx 0.v, 0, 2.v", # load fp 1/2 from mem 0/8
- "sv.stfsu 0.v, 16(4.v)", # store fp 1/2, update RA *twice*
- "sv.lfs 3.v, 0(4.v)", # re-load from UPDATED r4/r5
+ """>>> lst = ["sv.lfsx *0, 0, *4", # load fp 1/2 from mem 0/8
+ "sv.stfsu *0, 16(*4)", # store fp 1/2, update RA *twice*
+ "sv.lfs *2, 0(*4)", # re-load from UPDATED r4/r5
]
+
+ This is quite an involved (deceptively simple looking) test.
+ The sv.stfsu is creating a *Vector* of Effective Addresses, and
+ consequently is updating (writing) a *Vector* of EAs into the GPR.
+
+ Walkthrough:
+
+ 1) sv.lfsx *0, 0, *4 VL=2 so there are *two* lfsx operations
+ lfsx 0, 0, 4 loads from MEM[GPR(4)], stores in FPR(0)
+ lfsx 1, 0, 5 loads from MEM[GPR(5)], stores in FPR(1)
+
+ 2) sv.stfsu *0, 16(*4) again, VL=2 so there are two ST-FP-update ops
+ stfsu 0, 16(4) EA=GPR(4)+16, FPR(0) to MEM[EA], EA to GPR(4)
+ stfsu 1, 16(5) EA=GPR(5)+16, FPR(0) to MEM[EA], EA to GPR(5)
+
+ note that there are **TWO** FP writes to memory, and **TWO**
+ writes of the calculated Effective Address to GPR, in regs 4 and 5
+ GPRs 4 and 5 are *overwritten*.
+
+ 3) sv.lfs *3, 0(*4) VL=2, so two immediate-LDs
+ lfs 3, 0(4) EA=GPR(4)+0, FPR(3) = MEM[EA]
+ lfs 4, 0(5) EA=GPR(5)+0, FPR(4) = MEM[EA]
+
+ here we have loaded from the *overwritten* GPRs 4 and 5.
+
+ strictly speaking this unit test should also verify the contents
+ of the memory locations 0x10 and 0x18, which should contain the
+ single-precision FP numbers in the bottom 4 bytes. TODO
"""
- lst = SVP64Asm(["sv.lfsx 0.v, 0, 4.v",
- "sv.stfsu 0.v, 16(4.v)",
- "sv.lfs 3.v, 0(4.v)",
+ lst = SVP64Asm(["sv.lfsx *0, 0, *4",
+ "sv.stfsu *0, 16(*4)",
+ "sv.lfs *2, 0(*4)",
])
lst = list(lst)
# SVSTATE (in this case, VL=2)
svstate = SVP64State()
- svstate.vl[0:7] = 2 # VL
- svstate.maxvl[0:7] = 2 # MAXVL
- print ("SVSTATE", bin(svstate.spr.asint()))
+ svstate.vl = 2 # VL
+ svstate.maxvl = 2 # MAXVL
+ print ("SVSTATE", bin(svstate.asint()))
# memory addresses 0x0000 and 0x0008
initial_mem = {0x0000: (0x42013333, 8), # 32.3
self.assertEqual(sim.gpr(5), SelectableInt(0x18, 64))
self.assertEqual(sim.fpr(0), SelectableInt(0x4040266660000000, 64))
self.assertEqual(sim.fpr(1), SelectableInt(0xC004000000000000, 64))
- self.assertEqual(sim.fpr(3), SelectableInt(0x4040266660000000, 64))
- self.assertEqual(sim.fpr(4), SelectableInt(0xC004000000000000, 64))
-
+ self.assertEqual(sim.fpr(2), SelectableInt(0x4040266660000000, 64))
+ self.assertEqual(sim.fpr(3), SelectableInt(0xC004000000000000, 64))
def test_sv_fpadd(self):
- """>>> lst = ["sv.fadds 6.v, 2.v, 4.v"
+ """>>> lst = ["sv.fadds *6, *2, *4"
]
"""
- lst = SVP64Asm(["sv.fadds 6.v, 2.v, 4.v"
+ lst = SVP64Asm(["sv.fadds *6, *2, *4"
])
lst = list(lst)
# SVSTATE (in this case, VL=2)
svstate = SVP64State()
- svstate.vl[0:7] = 2 # VL
- svstate.maxvl[0:7] = 2 # MAXVL
- print ("SVSTATE", bin(svstate.spr.asint()))
+ svstate.vl = 2 # VL
+ svstate.maxvl = 2 # MAXVL
+ print ("SVSTATE", bin(svstate.asint()))
with Program(lst, bigendian=False) as program:
sim = self.run_tst_program(program, svstate=svstate,
self.assertEqual(sim.fpr(6), SelectableInt(0x0, 64))
self.assertEqual(sim.fpr(7), SelectableInt(0xc050266660000000, 64))
+ def test_sv_fpmadds(self):
+ """>>> lst = ["sv.fmadds *6, *2, *4, 8"
+ ]
+ two vector mul-adds with a scalar in f8
+ * fp6 = fp2 * fp4 + f8 = 7.0 * 2.0 - 2.0 = 12.0
+ * fp7 = fp3 * fp5 + f8 = 7.0 * 2.0 - 2.0 = 12.0
+ """
+ lst = SVP64Asm(["sv.fmadds *6, *2, *4, 8"
+ ])
+ lst = list(lst)
+
+ fprs = [0] * 32
+ fprs[2] = 0x401C000000000000 # 7.0
+ fprs[3] = 0xC02399999999999A # -9.8
+ fprs[4] = 0x4000000000000000 # 2.0
+ fprs[5] = 0xC040266660000000 # -32.3
+ fprs[6] = 0x4000000000000000 # 2.0
+ fprs[7] = 0x4000000000000000 # 2.0
+ fprs[8] = 0xc000000000000000 # -2.0
+
+ # SVSTATE (in this case, VL=2)
+ svstate = SVP64State()
+ svstate.vl = 2 # VL
+ svstate.maxvl = 2 # MAXVL
+ print ("SVSTATE", bin(svstate.asint()))
+
+ with Program(lst, bigendian=False) as program:
+ sim = self.run_tst_program(program, svstate=svstate,
+ initial_fprs=fprs)
+ self.assertEqual(sim.fpr(6), SelectableInt(0x4028000000000000, 64))
+ self.assertEqual(sim.fpr(7), SelectableInt(0x4073a8a3c0000000, 64))
+
def run_tst_program(self, prog, initial_regs=None,
svstate=None,
initial_mem=None,