nvc0/ir: add a "high" subop for shifts, emit shf.l/shf.r for 64-bit

Note that this is not available for SM20/SM30.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: fix SET and SLCT emission

We were never emitting a .X flag for consuming condition code on SET,
and weren't emitting a signed type for SLCT comparison. Discovered while
working on int64 logic.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add support for emitting partial min/max ops for int64

These operations allow you to compute min/max on arbitrary-width
integers, 32 bits at a time.

Note that the low/med ops implicitly set the condition code, and the
med/high ops implicitly consume it.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gallium: add separate PIPE_CAP_INT64_DIVMOD

Nouveau does not currently have logic to implement this as a library
function. Even though such a library could be written, there's no big
advantage to do it that way for now given that int64 is a very uncommon
use-case. Allow a driver to expose INT64 without supporting division and
modulo operations.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

docs: improve the list of gl implementations

Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs: improve the list of implemented APIs

Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

glsl: Allow compatibility shaders with MESA_GL_VERSION_OVERRIDE=...

Previously if you used MESA_GL_VERSION_OVERRIDE=3.3COMPAT, Mesa exposed
an OpenGL 3.3 compatibility profile context (with various unimplemented
features and bugs), but still refused to compile shaders with

   #version 330 compatibility

This patch simply adds a small bit of plumbing to let that through.

Of course the same caveats apply: compatibility profile is still not
supported (and will not be supported), so there are no guarantees that
anything will work.

Tested-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

docs: reword sentence that my brain can't parse

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Elie Tournier <tournier.elie@gmail.com>

docs: https all the links \o/

Most of them already redirected to https anyway, so we might as well
avoid the redirection and the security implications by linking directly
to the right protocol.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: fix gallium wiki link in relnotes

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: update 'thanks' for hosting

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

i965/fs: add support for int64 to bool conversion

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir: add opcode to perform int64 to bool conversions

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]2[iu]32

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]642f

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: legalize [u]int64 to 32-bit data conversions in lower_d2x

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]642d

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

i965: Allow int64 conversion operations in channel_expressions

This fixes 143 of the new piglit tests added by Nicolai

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

util/disk_cache: stop using ralloc_asprintf() unnecessarily

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: add param to force shader recompile

This will be used to skip checking the cache and force a recompile.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

util: add a disk_cache_remove() function

This will be used to remove cache items created with old versions
of Mesa or other invalid cache items from the cache.

V2: rename stub function (cache_* funtions were renamed disk_cache_*)
in master.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

st/mesa/i965: create link status enum

For the on-disk shader cache we want to be able to differentiate
between a program that was linked and one that was loaded from cache.

V2:
 - don't return the new enum directly to the application when queried,
   instead return GL_TRUE or GL_FALSE as required. Fixes google-chrome
   corruptions when using cache.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

docs: update intro.html to mention new APIs, etc

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

docs: the site is now hosted by freedesktop.org

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

radv: Add CPU color packing for VK_FORMAT_A2B10G10R10_UNORM_PACK32.

For allowing fast color clears in the main render targets of dota2.

[airlied: fix clear_vals[1] as suggested by Andres.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: (trivial) include <inttypes.h> for PRIx64 macros

Fixes a compile error with mingw.

swr: [rasterizer jitter] Pass LLVM-IR size into jitter

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

Removed temporary scafolding in PA, widended the PA_STATE interface
for SIMD16, and implemented PA_STATE_CUT and PA_TESS for SIMD16.

PA_STATE_CUT and PA_TESS now work in SIMD16.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Disable unsafe FP optimizations in the jitter

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

Widen simdvertex to SIMD16/simd16vertex in frontend for passing VS
attributes from VS to PA.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Add DEBUGTRAP jit builder function

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Multisample blend jit fix

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Change SimdVector representation to array

Make all SimdVectors in LLVM represented as simdscalar[4] rather
than a struct.

Fixes issues with promotion of values from i32 to i64 to match
register width.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Fix issues with stream-out on llvm>=3.8

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Adjust jitter header includes

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

SIMD16 Primitive Assembly (PA) only supports TriList and RectList.

CUT_AWARE_PA, TESS, GS, and SO disabled in the SIMD16 front end.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

docs: update package contents

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: fix unpacking instructions

File names were wrong, file formats were wrong, bunzip command was
wrong...

I also removed all but the simplest example; people who use pipes already
know how to untar, so let's simplify and remove potential confusion for
non-tech-savvy users.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: remove dead 'beta' link

Release candidates haven't been in a 'beta' subdir in a long time, so let's
replace the dead link with an explanation instead.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: add a note about the new version scheme

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

r600/sb: Fix memory leak

Signed-off-by: Marek Olšák <marek.olsak@amd.com>

mesa: use PRId64/PRIu64 when printing 64-bit ints

V2: actually use PRIu64

Reviewed-by: Dave Airlie <airlied@redhat.com>

mesa/st: fix strict aliasing issue in int64 code.

This fixes the int64 code same as the double code.

Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/uniform: fix strict aliasing issues with int64 code.

This fixes these like the double version does.

Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: handle dcc in explicit image resolve path. (v2)

We need to initialize dcc like we do in the subpass path.

v2: fix initial/final layouts
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Enable fast clears by default.

Works for me on dota2 and talos now.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>

spirv: Add more asserts in vtn_vector_construct

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99465

configure.ac: remove src/gallium/winsys/intel/drm/Makefile reference

Not wired up (not referenced in any SUBDIR), leading to `make distcheck'
failure.

Fixes: d77fa310ed8 "ilo: EOL drop unmaintained gallium drv from buildsys"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

docs: reword ilo removal note

Properly annotate <li> and keep the note analogous to all the previous
ones - OpenVG, st/egl, etc.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

configure.ac: Remove redundant libglvnd stanza

There were two "libglvnd configuration" section in the squashed commit
that added libglvnd support, while only one in the original libglvnd
branch. A following commit moves one of them downwards. Now remove the
upper "older" one and move GL_LIB name decision downwards after the new
libglvnd configuration section.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>

travis: use both cores for make/make check

The instance offers 2 cores, so use them to speed things up.

v2: Set MAKEFLAGS instead [Eric]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

travis: add nearly all gallium drivers to the list

Note: we need the explicit --enable-freedreno for libdrm since the
latter is 'smart' and disables it if building on !arm platforms.

The radeonsi and swr are explicitly left out since they require
'too-recent' LLVM - 3.6

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

travis: correct libdrm required regex to also track libdrm itself

The current regex was tracking only the libdrm_foo packages, while with
recent changed we bumped only (and rightfully so) libdrm.

Fix the regex to track any libdrm package.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

configure.ac: add swr to the gallium drivers list.

v2: Rebase on top of ILO removal.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

configure.ac: list all the dri-drivers in the help string

It's unlikely that any of the additions come as a suprise to anyone
i915, nouveau, radeon, r200. Regardless, state clearly what's
available.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: correct compute shader checks for memoryBarrier functions

As per the spec -
"The functions memoryBarrierShared() and groupMemoryBarrier() are
available only in compute shaders; the other functions are available
in all shader types."

Conform to this by adding another delegate to check for compute
shader support instead of only whether the current stage is compute

This allows some fragment shaders in Dirt Rally to compile

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/tgsi: fix oob access in parse instruction

When parsing texture instruction, it doesn't stop if the
'cur' is ',', the loop variable 'i' will also be increased
and be used to index the 'inst.TexOffsets' array. This can lead
an oob access issue. This patch avoid this.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>

Revert "i965: Disable guardband clipping in the smaller-than-viewport case."

This reverts commit 0bac2551e40410e2251daf4fd9faf69310ab34ce.

Now that we position the guardband correctly (applying translations
in addition to scaling) and made it as large (or larger) than the
render target, this shouldn't be necessary.

Now we leave guardband clipping enabled 100% of the time, like the
Windows driver does.

Fixes GL45-CTS.gtf21.GL2FixedTests.clip.clip.  It tries to draw a
16384x64 rectangle, and it appears that some kind of numerical
imprecisions in the clipper result in some edge pixels going missing.
The Windows driver passes this test because of guardband clipping.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Always scissor on Gen6-7.5 instead of disabling guardband.

Previously we disabled the guardband when the viewport was smaller than
the framebuffer on Gen6-7.5, to prevent portions of primitives from
being draw outside of the viewport.  On Gen8+, we relied on the viewport
extents test to effectively scissor this away for us.

We can simply always enable scissoring instead.  We already include the
viewport in the scissor rectangle, so this will effectively do the
viewport extents test for us.  (The only difference is that the scissor
rectangle doesn't support sub-pixel values.  I think that's okay.)

Given that the viewport extents test is essentially a second scissor,
and is enabled for basically all 3D drawing on Gen8+, it stands to
reason that scissoring is cheap.  Enabling the guardband reduces the
cost of clipping, which is expensive.

The Windows driver appears to never disable guardband clipping, and
appears to use scissoring in this case.  I don't know if they leave
it on universally though.

This fixes misrendering in Blender, where the "floor plane" grid lines
started rendering at wrong angles after I disabled XY clipping of line
primitives.  Enabling the guardband seems to solve the issue.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99339
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Use a better guardband calculation.

(Patch co-authored by Jason and Ken.)

We scaled the guardband based on the viewport size, but failed to
take into account the translation portion of the viewport transform.

This meant the guardband was always centered around the origin.
We want it to be centered around the screen-space drawing area,
which is the intersection of the viewport and the render target.

At best, getting this wrong would reduce the guardband's effectiveness
in some cases.  At worst, it might break things - objects outside of the
guardband are trivially rejected, so getting the guardband in the wrong
place and leaving guardband clipping enabled could cause problems.

v2: drop clamping of positive maximums.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Combine the Gen6 SF and Clip viewport atoms.

The next patch will make the guardband calculation dependent on the
transformation matrix.  Instead of computing it in both atoms, just
combine them into a single atom.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

radv: pass FMASK alignment to application

As was done for dcc and cmask.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Pass DCC alignment to application.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>

radv: Pass CMASK alignment to application.

CMASK alignment can be greater than image data alignment, so pass
it to the app so that it knows what alignment to backing memory
should have.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/ac: avoid the fmask path when doing txs.

This fixes the vulkan samples deferredmultisampling test.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

swr: [rasterizer core] Removed unused clip code.

Removed unused Clip() and FRUSTUM_CLIP_MASK define.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] Remove dead code Clipper::ClipScalar()

Clipper::ClipScalar() is dead code and should be removed.  It is causing
an error with gcc-7 because it references a now defunct member.

v2: includes bugzilla reference, same code change

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99633
CC: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>

gallium: Remove vc4 simulator hack from loader infrastructure.

Now that there's MESA_LOADER_DRIVER_OVERRIDE for choosing the driver name
we load, we don't need this any more.

v2: Get the junk out of pipe_loader_drm.c, too.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v2)

loader: Add an environment variable to override driver name choice.

My vc4 simulator has been implemented so far by having an entrypoint
claiming to be i965, which was a bit gross.  The simulator would be a lot
less special if we entered through the vc4 entrypoint like normal, so add
a loader environment variable to allow the i965 fd to probe as vc4.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

targets: Use a macro to reduce cut and paste in driver setup.

All the replicated prototypes/function bodies obfuscated the interesting
logic of the file: the mapping from driver enable macros to entrypoints we
expose, and the way that the swrast entrypoints are special compared to
the DRM entrypoints.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeon/ac: move common llvm build functions to a separate file.

Suggested by Marek.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

eglmesaext: add new enums for EGL_MESA_drm_image_formats

Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs: add EGL_MESA_drm_image_formats extension proposal

dri/common: clear the loaderPrivate pointer in driDestroyDrawable

The GLX specification says about glXDestroyPixmap:

    "The storage for the GLX pixmap will be freed when it is not current
     to any client."

We're not really following this language to the letter: some of the storage
is freed immediately (in particular, the dri3_drawable, which contains both
GLXDRIdrawable and loader_dri3_drawable). So we NULL out the pointers to
that freed storage; the previous patches added the corresponding NULL-pointer
checks.

This fixes memory corruption in piglit
./bin/glx-visuals-depth/stencil -pixmap -auto

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

glx: guard swap-interval functions against destroyed drawables

The GLX specification says about glXDestroyPixmap:

    "The storage for the GLX pixmap will be freed when it is not current
     to any client."

So arguably, functions like glXSwapIntervalMESA can be called after
glXDestroyPixmap has been called for the currently bound GLXPixmap.
In that case, the GLXDRIDrawable no longer exists, and so we just skip
those calls.

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

glx/dri3: guard in_current_context against a disappeared drawable

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glx/dri3: handle NULL pointers in loader-to-DRI3 drawable conversion

With a subsequent patch, we might see NULL loaderPrivates, e.g. when
a DRIdrawable is flushed whose corresponding GLXDRIdrawable was destroyed.
This resulted in a crash, since the loader vs. DRI3 drawable structures
have a non-zero offset.

Fixes glx-visuals-{depth,stencil} -pixmap

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

anv/pipeline: set ThreadDispatchEnable conditionally

Set 3DSTATE_WM/ThreadDispatchEnable bit on/off based on the same
conditions as used in the GL version.

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

main/fboject: default_framebuffer allowed for GetFramebufferParameter

Before 4.5, the default framebuffer was not allowed for
GetFramebufferParameter, so it should return INVALID_OPERATION for any
call using the default framebuffer.

4.5 included new pnames, and some of them are allowed for the default
framebuffer. For the rest, INVALID_OPERATION. From OpenGL 4.5 spec,
section 9.2.3 "Framebuffer Object Queries:

   "An INVALID_OPERATION error is generated by GetFramebufferParameteriv
    if the default framebuffer is bound to target and pname is not one
    of the accepted values from table 23.73, other than
    SAMPLE_POSITION."

Fixes:
GL45-CTS.direct_state_access.framebuffers_get_parameter_errors

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

main/fbobject: implement new 4.5 pnames for GetFramebufferParameter

4.5 added new pnames allowed for GetFramebufferParameter, and
GetNamedFramebufferParameter.

From OpenGL 4.5 spec, section 9.2.3 "Framebuffer Object Queries" (quoting
the paragraph with only the new pnames, not all the supported):

   "pname may also be one of DOUBLEBUFFER,
    IMPLEMENTATION_COLOR_READ_FORMAT, IMPLEMENTATION_COLOR_READ_TYPE,
    SAMPLES, SAMPLE_BUFFERS, or STEREO, indicating the corresponding
    framebuffer-dependent state from table 23.73. Values of
    framebuffer-dependent state are identical to those that would be
    obtained were the framebuffer object bound and queried using the
    simple state queries in that table. These values may be queried
    from either a framebuffer object or a default framebuffer."

Fixes:
GL45-CTS.direct_state_access.framebuffers_get_parameters

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

main/framebuffer: refactor _mesa_get_color_read_format/type

Current implementation returns the value for the currently bound read
framebuffer. GetNamedFramebufferParameteriv allows to get it for any
given framebuffer. GetFramebufferParameteriv would be also interested
on that method

It was refactored by allowing to pass a given framebuffer. If NULL is
passed, it used the currently bound framebuffer.

It also adds a call to _mesa_update_state. When used only by
GetIntegerv, this one was called as part of the extra checks defined
at get_hash. But now that the method is used by more methods, and the
update is needed, it makes sense (and it is safer) just calling it on
the method itself, instead of rely on the caller.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

radv: fix shared memory load/stores.

If we have an indirect index here we need to scale it by attribute slots
e.g. is this is vec2[256] then we get an indir_index in the 0.255 range
but the vec2 are aligned inside vec4 slots. So scale the indir index,
then extract the channels.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/ac: correctly size shared memory usage.

We count the number of slots used, but slots are vec4 sized,
so we have to scale by 16 not 4.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: fix compute shared memory stores since 64-bit.

These regressed and caused doom to stop loading.

Fixes:
03724af26 radv/ac: Implement Float64 load/store var.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

docs: replace URL in features.txt

Replace unmaintained http://dri.freedesktop.org/wiki/MissingFunctionality
URL with http://mesamatrix.net/

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95460
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: whitespace fixes in context.c

Remove trailing whitespace, replace tabs with spaces.  Trivial.

anv/blorp: Disable resolves for transparent black clears

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/cmd_buffer: Don't temporarily enable CCS_E within a render pass

Compressing a render target and decompressing it in the same
single-subpass render pass may waste bandwidth. While this may be
beneficial in some circumstances, it does not help in all. Reclaims
about 1.95% FPS for Dota 2 on some configurations.

v2 (Jason Ekstrand):
- Provide a more thorough comment
- Enable CCS_D for input attachments
v3 (Jason Ekstrand):
- Provide performance numbers

Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

mesa: Don't crash when destroying contexts created with no visual.

dEQP-EGL.functional.create_context.no_config tries to create a context
with no config, then immediately destroys it.  The drawbuffer is never
set up, so we can't dereference it asking if it's double buffered, or
we'll crash on a null pointer dereference.

Just bail early.

Applications using EGL_KHR_no_config_context could hit this.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

winsys/amdgpu: avoid potential segfault in amdgpu_bo_map()

cs can be NULL when it comes from r600_buffer_map_sync_with_rings()
to avoid doing the same checks. It was checked for write mappings
but not for read mappings.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

android: fix droid_create_image_from_prime_fd_yuv for YV12

Earlier changes introduced is_ycrcb flag which checks the component
order of u and v components. Condition for setting the flag was
incorrect, with ycrcb we are supposed to have cr before cb.

This patch (together with a fix in our gralloc) fixes corrupted
rendering from 'test-opengl-gl2_yuvtex' native test and corrupted
gallery thumbnail in application switcher on Android-IA.

Fixes: 51727b1cf57e8c4630767eb9ead207b102ffa489
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>

ilo: EOL unmaintained older gallium intel driver

This is no longer actively maintained and is just
accumulating bitrot.

Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Chia-I Wu <olvaffe@gmail.com>

ilo: EOL drop unmaintained gallium drv from buildsys

This is no longer actively maintained and is just
accumulating bitrot.

Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Chia-I Wu <olvaffe@gmail.com>

ilo: EOL unplumb unmaintained gallium drv from winsys

This is no longer actively maintained and is just
accumulating bitrot.

Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Chia-I Wu <olvaffe@gmail.com>

configure: libdrm is a single package

The intent of the libdrm_$driver version limits has always been to not
burden the "other" drivers with updating their libdrm unless really
necessary. Unfortunately the configure script erroneously only checked
the driver-specific bit and not the generic bit of libdrm as well. Fix
this.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

st/mesa: MAX_VARYING is the max supported number of patch varyings, not min

This fixes
GL45-CTS.tessellation_shader.tessellation_shader_tessellation.max_in_out_attributes
on nouveau. We only support 30 patch varyings (as 2 vec4 slots end up
being used for tess level settings), but were getting 32 exposed.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>

vbo: process buffer binding state changes on draw when recording

The VBO module keeps track of any vbo buffers. It updates this list when
receiving an InvalidateState call, however this never happens when
recording draws right now. Make sure that we do all the usual state
updates when recording draws so that the VBO list may be kept up to
date.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99631
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>

radv/ac: move to using shared emit_ddxy code.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radeonsi/ac: move most of emit_ddxy to shared code.

We can reuse this in radv.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/ac: use shared thread id code

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>