intel/dev: Bail when INTEL_DEVID_OVERRIDE is not valid

Avoids surprises where you set an OVERRIDE but it gets ignored and the
system PCI ID is used.

Also fixes the bug that the error of invalid platform name being
printed too early, even when the passed platform was a PCI ID (which
is also supported).

For the case where euid != uid, a warning was added but the behavior
wasn't changed: it is still going to fallback to system PCI ID.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4841>

anv,iris: Fix input vertex max for tcs on gen12

gen12 does away with the single patch dispatch mode for tcs, and
increases some limits so that 8_patch mode can always work. Make the
necessary changes so we don't try to fall back to single patch mode.

Fixes KHR-GL46.tessellation_shader.single.max_patch_vertices and others

Fixes: 44754279ace7 ("intel/fs/gen12: Use TCS 8_PATCH mode.")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4843>

freedreno/ir3: Set the FS .msaa flag to true during precompiles.

If you're going out of your way to do per-sample interpolation, you are
almost surely going to be doing so to an MSAA framebuffer.  Should reduce
recompiles with MSAA enabled.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno: Immediately compile a default variant of shaders.

Now that we normalize our keys fairly well, build a variant at shader
state creation time so that hopefully you don't have to call the compiler
at draw time (as is now the case with glmark2 ES and most of the humus GL
demos).

Fixes: #2782
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Set up outputs for multi-slot varyings.

Necessary to avoid compiler assertion failures in:

dEQP-GLES31.functional.program_interface_query.program_output.type.interface_blocks.out.named_block_explicit_location.struct.mat3x2

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Stop initializing regid of so->outputs during setup.

It's unused and overwritten by ir3_compile_shader_nir().

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Improve shader key normalization.

We can remove a bunch of conditional code at key comparison time by
computing a bitmask of used key bits at ir3_shader creation time.  This
also gives us a nice place to put additional key simplification to reduce
how many variants we create (like skipping rastflat if we don't read
colors in the FS, or skipping vclamp_color if we don't write colors).

It does mean walking the whole key to AND it, but the key is just 28 bytes
so far so that seems pretty fine.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno: Emit debug messages when doing draw-time recompiles of shaders.

Right now that's "always" unless you have shaderdb set.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Remove unused half precision shader key flag.

The code using it was removed in 4af86bd0b933 ("freedreno/ir3: remove
half-precision output")

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno: Fix assertion failures on GS/tess shaders with shader-db enabled.

We weren't filling in the tess mode of the key, or setting has_gs on GS
shaders, resulting in assertion failures when NIR intrinsics didn't get
lowered.

We have to make a guess at prim mode for TCS, but it should be better to
have some shader-db coverage than none, and it will avoid these failures
happening when we start precompiling shaders.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Skip tess epilogue if the program is missing stores.

Some of the negative API tests make shaders for tess stages that don't do
all the stores they need to.  Once we start precompiling (or doing
shader-db of tess), we need to at least not segfault when generating them.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno: Stop doing binning shaders other than the VS in shader-db.

ir3_cache.c only ever asks for binning variants for VS.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Fix register allocation assertion failures.

We were failing to tell the allocator about the restriction that scalar
texture instructions (allocated as scalar regs) couldn't be allocated such
that the start of the full unwritemasked vector started before r0.  There
was a patch in select_reg_callback on a6xx that tried to work around that,
but you could still end up backed into a corner you shouldn't be because
we didn't tell the RA what it needed.

Fixes compiler assertion failures on a300-a400's blit_z shader, used for
Z32F gmem blits.

Looks like as a result we get tighter register allocation but more nops:

instructions in affected programs: 757945 -> 760356 (0.32%)
nops in affected programs: 317983 -> 320468 (0.78%)
non-nops in affected programs: 27525 -> 27451 (-0.27%)
mov in affected programs: 3098 -> 3023 (-2.42%)
dwords in affected programs: 109664 -> 110656 (0.90%)
last-baryf in affected programs: 112701 -> 112847 (0.13%)
full in affected programs: 4326 -> 4011 (-7.28%)
sstall in affected programs: 120550 -> 120836 (0.24%)
(ss) in affected programs: 13939 -> 13918 (-0.15%)
(sy) in affected programs: 3006 -> 2786 (-7.32%)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Drop hack to clean up split vars

When the GS lowering was working on store_output intrinsics, we had to
clean up the split vars to avoid getting confused.  Now that we shadow
the output vars instead, there's no confusion and we can drop this
hack.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Lower GS builtins before lowering IO

We mostly got away with replacing a store_output with a store_var, but
for complex types like structs, that doesn't work. Once the IO has
been lowered from vars to intrinsic, we've lost the deref chains and
can't properly shadow the outputs.

This commits moves the GS lowering up so we do it before the output
variables get lowered to store_output.  This way the pass works much
like nir_lower_io_to_temporaries() and cleanly shadows the outputs.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Add ir3_nir_lower_to_explicit_input() pass

This pass lowers per-vertex input intrinsics to load_shared_ir3. This
was open coded in the TCS and GS lowering passes before - this way we
can share it. Furthermore, we'll need to run the rest of the GS
lowering earlier (before lowering IO) so we need to split off this
part that operates on the IO intrinsics first.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Rename ir3_nir_lower_to_explicit_io

We rename it to ir3_nir_lower_to_explicit_output, since it only
handles output and we'll add a lowering pass for input next.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Pass stream output info to ir3_shader_from_nir

We need shader->stream_output filled out when we layout the push
constants in ir3_setup_const_state(). Otherwise
const_state->offsets.tfbo ends up as ~0, which doesn't work.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Fix the a3xx TF outputs stores.

We were trying to deref the vector-collected outputs[] array before it's
been set up, but we want the per-component outputs anyway.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

freedreno/ir3: Set up the block predecessors for a3xx TF

Fixes a segfault in ir3_legalize.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4562>

intel/fs: Update location of Render Target Array Index for gen12

Render Target Array Index has moved from R0.0[26:16] to
R1.1[26:16] on gen12.

Fixes dEQP-VK.multiview.input_attachments.*

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4836>

pan/decode: Properly print tripped zeroes

The "%" got lost.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: 6148d1be4bb5 ("panfrost: Fix size of bifrost sampler descriptor")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: Add Bifrost texture trampoline BO to batch

Fixes: d3eb23adb50c ("panfrost: Emit sampler descriptor on bifrost")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

pan/bi: Lower for now sincos

Will be implemented later.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: mali_attr_meta.unknown1 is zero on Bifrost

For unknown1 reasons :)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: GPUs newer than G-71 don't have swizzles...

for attributes and varyings.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

pan/decode: Trace to stderr with PANDECODE_DUMP_FILE=stderr

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: Update Bifrost fields in mali_shader_meta

Not much is known currently about these fields and their values, but
this gets things going in the scenarios we have been testing with so
far.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

pan/bi: Print shaders only if BIFROST_MESA_DEBUG=shaders

Similar to how it's done in the Midgard compiler.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

pan/bi: Enable lower_mediump_outputs NIR pass

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: Add a bit more info about some tiler fields

Has been observed that after the job chain has completed, those fields
become populated.

tiler_heap_next_start contains an address inside the tiler heap, a bit
before the value that the GPU writes to tiler_heap_free.

used_hierarchy_mask contains a hex value that corresponds to values
observed as hierarchy masks.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: Create additional BO for the checksum of imported BOs (Bifrost)

Similar to what the blob does. My reason for doing this was mainly so
traces weren't as different, which makes it more work to spot
relevant differences.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

panfrost: Split bit out of format.unk3

On Bifrost traces, we can observe that this bit is always enabled.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4832>

ci: add lists of expected failures & skipped tests for RAVEN with ACO

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4848>

scripts: remove unittest.mock dependency when not used

Found upon inspection.

Signed-off-by: Andres Gomez <agomez@igalia.com
Reviewed-and-Tested-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4840>

ci: fix reporting the number of unexpected/flakes

`wc -l $file` returns the number of lines and the filename.

Fixes: b8c66aeb934 ("ci: Clean up some excessive use of pipes in dEQP results processing.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4829>

gitlab-ci: Use YAML anchor for llvmpipe paths in virgl rules

Instead of duplicating them.

Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4808>

freedreno: we don't need aligned vbo's

This gets rid of the last reason that mesa/st would use `u_vbuf` on
a6xx.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4812>

freedreno/a6xx: add some more formats

u_vbuf was translating these for us.. which isn't really necessary.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4812>

pan/decode: Don't crash on missing payload

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

panfrost: Fix tiled texture "stride"s on Bifrost

They're not real strides like linear textures but the hw does use them
so we do have to get it right annoyingly.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

panfrost: Fix norm coords on bifrost sampler

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

panfrost: Fix sampler wrap/filter field orders

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

panfrost: Fix size of bifrost sampler descriptor

Should be 32-bytes, it looks like.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

panfrost: Fix texture field size

I have to imagine this was UB.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bit: Add round tests

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bit: Interpret ROUND

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bit: Add framework forinterpreting double vs float

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bi: Pack round opcodes (FMA, either 16 or 32)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bi: Pipe multiple textures through

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

pan/bi: Add texture indices to IR

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4844>

freedreno/a6xx: fix LRZ hang

In detecting the case where we actually do need to re-emit LRZ state
(due to new batch), we were checking `ctx->last.dirty` to detect when
we cannot trust previous state.  But this is cleared before we check
it.

Move where it is cleared to the end of the draw_vbo() path.

Fixes: dfa702e94b9 ("freedreno/a6xx: limit LRZ state emit")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4842>

freedreno/ir3: Leave bools as 1-bit, storing them in full regs.

If use NIR's 1-bit bool representation , we get exactly the bool behavior
the hardware provides: CMPS produces true or false, AND/OR/XOR work as
intended without extra absnegs, and we can pass those half values directly
to other CMPS.  We emit an absneg for b2b1 ("turn a memory load into a
1-bit NIR boolean"), but we would have done so for the ir3_n2b() on the
use of that value anyway.  The most awkward bit is that inot(a@1) is now a
sub(1, a), but we can encode the 1 as an immediate so it's fine.

No significant changes to GL_TIME_ELAPSED on my set of traces (n=21).

instructions in affected programs: 1570638 -> 1548702 (-1.40%)
nops in affected programs: 624053 -> 611381 (-2.03%)
non-nops in affected programs: 959061 -> 949797 (-0.97%)
mov in affected programs: 5258 -> 5252 (-0.11%)
cov in affected programs: 15099 -> 15902 (5.32%)
dwords in affected programs: 469600 -> 452768 (-3.58%)
last-baryf in affected programs: 162211 -> 154726 (-4.61%)
full in affected programs: 4881 -> 4797 (-1.72%)
sstall in affected programs: 173953 -> 174545 (0.34%)
(ss) in affected programs: 10922 -> 10934 (0.11%)
(sy) in affected programs: 728 -> 745 (2.34%)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4518>

freedreno/ir3: Drop redundant IR3_REG_HALF setup in ALU ops.

It's set by ir3_put_dst() immediately after.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4518>

radeonsi: revert an accidental change in si_clear_buffer

The change was in: 7b0b085c94347cb9c94d88e11a64a6c341d95477

Fixes: 7b0b085c943 ("radeonsi: drop the negation from fmask_is_not_identity")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: fix si_compute_clear_render_target with render condition enabled

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: add a workaround to fix KHR-GL45.texture_view.view_classes on gfx9

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: implement and use compute-based DCC decompression on gfx9-10

DCC_DECOMPRESS doesn't work. Instead of trying to figure out why,
use a compute blit where the load is compressed and the store is
uncompressed.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: add SI_IMAGE_ACCESS_DCC_OFF to ignore DCC for shader images

A shader-based DCC decompress pass will use this.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: bind shader images after DCC is disabled for image stores

This prevents an infinite recursion with a compute-based DCC decompression
when it restores shader images.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: clean up and deduplicate code around internal compute dispatches

In addition to the cleanup, there are these changes in behavior:
- clear_render_target waits for idle after the dispatch and then flushes
  L0-L1 caches (this was missing)
- sL0 is no longer invalidated before the dispatch, because src resources
  don't use it
- sL0 is no longer invalidated after the dispatch if dst is an image

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

radeonsi: unify and align down the max SSBO/TBO/UBO buffer binding size

Rounding down the size fixes:
    KHR-GL45.enhanced_layouts.ssb_member_invalid_offset_alignment

Fixes: 03e2adc990d239119619f22599204c1b37b83134
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

tgsi_to_nir: handle TGSI_OPCODE_BARRIER

Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

tgsi_to_nir: handle TGSI_SEMANTIC_BLOCK_SIZE

Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4761>

glthread: upload non-VBO vertices and indices for non-Indirect non-IBM draws

This is basically the same thing u_vbuf does.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: handle gl{Push,Pop}ClientAttrib{DefaultEXT} for glthread states

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: handle POS vs GENERIC0 aliasing

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: initialize VAOs properly

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: track primitive restart state

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: track instance divisor changes

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: track pointers and strides for Pointer & EXT_dsa attrib functions

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: don't use atomics for refcounting to decrease overhead on AMD Zen

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

glthread: do glBufferSubData as unsynchronized upload + GPU copy

1. glthread has a private upload buffer (as struct gl_buffer_object *)
2. the new function glInternalBufferSubDataCopyMESA is used to execute the copy
   (the source buffer parameter type is struct gl_buffer_object * as GLintptr)

Now glthread can handle arbitrary glBufferSubData sizes without syncing.

This is a good exercise for uploading data outside of the driver thread.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: add _mesa_InternalBind{ElementBuffer,VertexBuffers} for glthread

Uploaded non-VBO user data will be set via these functions.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: add glInternalBufferSubDataCopyMESA for glthread

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: inline vbo_context inside gl_context to remove vbo_context dereferences

The number of lines in the disassembly of vbo_exec_api.c.o decreased
by 4.5%, which roughly corresponds to a decrease in instructions
for immediate mode thanks to the removal of ctx->vbo_context dereferences.

It increases performance in one Viewperf11 subtest by 2.8%.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa,st/mesa: add a fast path for non-static VAOs

Skip most of _mesa_update_vao_derived_arrays if the VAO is not static.
Drivers need a separate codepath for this.

This increases performance by 7% with glthread and the game "torcs".

The reason is that glthread uploads vertices and sets vertex buffers
every draw call, so the overhead is very noticable. glthread doesn't
hide the overhead, because the driver thread is the busiest thread.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: don't update shaders on fixed-func state changes if user shaders are bound

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: don't set unnecessary program flags in _mesa_update_state

_NEW_PROGRAM is already set.
_NEW_FRAG_CLAMP is not used by the fixed-func fragment shader.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: set _NEW_FRAG_CLAMP only when needed

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: don't call _mesa_update_state for _mesa_get_clamp_fragment_color

It's not needed.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

st/mesa: Move _NEW_FRAG_CLAMP to NewFragClamp driver flag.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

mesa: optimize glPush/PopClientAttrib by removing malloc overhead

just declare all structures needed by the stack in gl_context.

This improves performance by 5.6% in the game "torcs". FPS: 101.01 -> 106.73

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4314>

freedreno/a6xx: don't set SP_FS_CTRL_REG0.VARYING for fragcoord

Similar change to 5785bcc8a0ff9c5072c647337bf73f696c63cbe6.  It appears
on a6xx and in fact this could cause varying corruption before the FS
had a chance to consume the varyings from varying storage.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2838
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4838>

iris: don't assert on unfinished aux import in copy paths

After a resource is created the first command using it could be a copy
command.

In iris_state we finish the import on surface/view creation but we
don't do that for copies.

v2: Move finish call to gallium entrypoints (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2725
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4657>

freedreno: sync registers with envytools

Pull in the `SP_xS_BRANCH_COND` regs to keep the mesa and envytools
copies from getting out of sync.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: more OUT_REG()

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno: scissor vs disabled scissor micro-opt

We don't need to deref and check rast state every time scissor changes,
only when rast state changes.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: convert const emit to OUT_PKT()

This is another hot packet.  This splits out each of the four cases
(geom vs frag, and indirect vs inline) intentionally, to avoid some
parity bit calc.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/ir3: inline const emit

Drop vfunc callbacks for per-gen packet emit, and instead have a header
that is #include'd once per gen.

We'll end up with multiple copies of some of this, but since we never
have multiple gen's of adreno on a single device, only one copy will be
paged in (and hopefully in the I-cache for hot-paths)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: split out const emit

In order to inline the const emit and drop the per-gen vfuncs to emit
the correct sort of packet, we should consolidate all of the entry-
points to const emit in one object file, otherwise we'll end up with
multiple copies per gen.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: convert draw packet to OUT_PKT()

This is one of the hotter pkt7 packets, since it is guaranteed to happen
on every draw.  Switch to OUT_PKT() for less driver overhead in the draw
path.

Slight bit of cheating for using CP_DRAW_INDX_OFFSET_0 for the first
dword in all cases.  Possibly *gen_header.py* could be more clever
and use typedef's in the cases of bitsets like vgt_draw_initiator.
But this works out because it is always the first dword.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: add OUT_PKT()

Similar to OUT_REG(), this has the benefits of:

1. No more messing up pkt size
2. Detects errors of mixing up the order of dwords in the packet
3. Optimizes to more efficient code

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: skip unnecessary MRT blend state

To lower CP overhead.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: combine sample mask into blend state

This gets rid of one lone register we used to emit directly in IB2
whenever blend state changes, at the expense of needing blend state
variants when sample-mask changes.  I think typically sample-mask
should not change frequently, so this seems like a fair trade-off.

To further limit the # of variants, we ignore sample-mask bits that
are not relavant for the current # of samples.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: move blend-color to stateobj

To reduce CP overhead for draws skipped in a bin.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: limit LRZ state emit

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: limit PROG_FB_RAST state emit

The dependency on RASTERIZER state is only when rasterizer_discard
changes.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: move scissor state to stateobj

To reduce CP overhead for draws skipped in a given tile.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>

freedreno/a6xx: move const state to single stateobj

In practice, we end up updating all the shader stages at the same time.
So collapse this into a single group.

Reduces CP overhead.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4813>