i965: Correct EmitNoIndirect shader compiler option flags.

These were out of sync with the flags used to control
lower_variable_index_to_cond_assign in brw_shader.cpp.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965/fs: Reset reg_from when we can't coalesce.

Not setting this would prevented coalescing after a failed attempt if
the sources for both MOVs were the same.

total instructions in shared programs: 1654531 -> 1650224 (-0.26%)
instructions in affected programs:     423167 -> 418860 (-1.02%)
GAINED:                                2
LOST:                                  0

Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Fill in a bunch of gen7/hsw data cache-related disasm.

This gets us disasm of atomic ops.

v2: Fix fallthrough on pre-gen7.  (bug caught by Ilia Mirkin).

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Stop setting up a 1:1 "attrib" member in our vertex inputs.

It's just the array index, so we can just go look at the array and see
which element we are.

No significant performance difference (n=140)

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Skip a bunch of IB BO refcount twiddling.

Improves cairo performance on glamor by 1.64828% +/- 1.04742% (n=65).

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/gen7: Skip repeated NULL depth/stencil state emits.

Improves cairo performance on glamor by 2.87752% +/- 0.966977 (n=57).

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

docs: Fix ubo indexing description

Ian points out that this being unrestricted was an oversight in the
spec, and is corrected in GLSL4.40.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>

draw: remove unused 'start' variable in draw_stats_clipper_primitives()

It was computed, but never actually used.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Try vectorizing when seeing a repeated assignment to a channel.

When considering assignment expressions like:

    v.x += u.x;
    v.x += u.x;

the vectorizer would incorrectly keep going, attempting to find more
instructions to vectorize.  It would overwrite the saved assignment
to point at the second one, and increment channels a second time,
resulting in try_vectorize thinking the expression was a vec2 instead of
a float.

Instead, if we see a repeated assignment to a channel, just try to
vectorize everything we've found so far.  This clears the saved state
so it will start over.

Fixes Piglit's repeated-channel-assignments.vert.

Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Propagate explicit binding information from the AST all the way to the linker

Information about the binding was not being properly communicated from
the front-end compiler to the linker.  As a result, the linker never
knew that any UBOs had explicit bindings!

Fixes the piglit test arb_shading_language_420pack-binding-layout.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: github@socker.lepus.uberspace.de [v0]
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Set binding for all elements of UBO array

Previously, a UBO like

    layout(binding=2) uniform U {
        ...
    } my_constants[4];

wouldn't get any bindings set.  The code would try to set the binding of
U, but that would fail.  It should instead set the bindings for U[0],
U[1], ...

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Set block bindings based on UniformBlocks rather than UniformStorage

For blocks, gl_shader_program::UniformStorage isn't very useful.  The
names stored there are the names of the elements of the block, so
finding blocks with an instance name is hard.  There is also only one
entry in ::UniformStorage for each element of a block array, and that is
a deal breaker.

Using ::UniformBlocks is what _mesa_GetUniformBlockIndex does.  I
contemplated sharing code between set_block_binding and
_mesa_GetUniformBlockIndex, but building the stand-alone compiler and
the unit tests make this hard.  I plan to return to this effort shortly.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Clean up "unused parameter" warnings

../../src/glsl/link_uniform_initializers.cpp:87:1: warning: unused parameter 'mem_ctx' [-Wunused-parameter]
../../src/glsl/link_uniform_initializers.cpp:87:1: warning: unused parameter 'type' [-Wunused-parameter]
../../src/glsl/link_uniform_initializers.cpp:127:1: warning: unused parameter 'mem_ctx' [-Wunused-parameter]
../../src/glsl/link_uniform_initializers.cpp:127:1: warning: unused parameter 'type' [-Wunused-parameter]

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Fold set_uniform_binding into call site

In the next patch, we'll see that using
gl_shader_program::UniformStorage is not correct for uniform blocks.
That means we can't use ::UniformStorage to select between the sampler
path and the block path.  Instead we want to just use the type of the
variable.  That's never passed to set_uniform_binding, and it's easier
to just remove the function (especially for later patches in the series)
than to add another parameter.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Various trivial clean-ups in set_sampler_binding

- Remove the spurious block left from the previous commit and re-indent.

- Constify elements.

- Make the spec reference in the code look like other spec references in
  the compiler.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

linker: Split set_uniform_binding into separate functions for blocks and samplers

The two code paths are quite different, and there are some problems in
the handling of uniform blocks.  Future changes will cause these paths
to diverge further.  Ultimately, selecting between the two functions
will happen at the set_uniform_binding call site, and
set_uniform_binding will be deleted.

NOTE: This patch just moves code around.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76323
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Cc: github@socker.lepus.uberspace.de

softpipe: fix shadow sampling

And remove nonsensical approximation of linear interpolation behavior
for shadow samplers.

Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>

softpipe: add PIPE_CAP_MIN/MAX_TEXTURE_GATHER_OFFSET query cases

To silence compiler warnings.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: use _mesa_get_srgb_format_linear() in sRGB texstore functions

Instead of switch statements.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: use macros to initialize texfetch_funcs[] table

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

swrast: fix more fetch_texel function names

These were missed/typo'd in the previous patch series:
s/R8G8B8A/R8G8B8A8/
s/rgba_16/RGBA_UNORM16/
s/rgba_uint/RGBA_UINT/
s/rgba_int/RGBA_SINT/

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

egl-static: Fix missing radeon_surface.h includes.

Fixes

  fatal error: radeon_surface.h: No such file or directory

when libdrm is not present, or non-Linux OSes.

Trivial.

gallium/radeon: fix missing winsys include in pipe-loader.

The commit 3b0b44f7def0acb4f7a7aef086c0bece321418a6 introduced a build
error:

error: dereferencing pointer to incomplete type

This patch fixes this issue in all the affected files.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

st/omx/enc: separate input buffer private and task structure

Keep tasks as linked list, this way we can associate
more than one encoding task with each buffer.

Signed-off-by: Christian König <christian.koenig@amd.com>

radeon/vce: implement B-frame support

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

radeon/vce: add proper CPB backtrack

Remember what frames we encoded at which position.

Signed-off-by: Christian König <christian.koenig@amd.com>

vl: add interface for H264 B-frame encoding

Signed-off-by: Christian König <christian.koenig@amd.com>

radeon/vce: remove RVCE_NUM_CPB_EXTRA_FRAMES

Doesn't seems to be needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>

docs/relnotes: Fix consistency, add i965 to ARB_buffer_storage.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>

i965: Fix missing _NEW_SCISSOR in Broadwell SF_CLIP_VIEWPORT state.

The _Xmin/_Xmax/_Ymin/_Ymax values need to be guarded by _NEW_SCISSOR.

Fixes Piglit's scissor-many, and rendering in GNOME Shell.
Hopefully fixes similar issues with Unity and ChromeOS.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75879
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: James Ausmus <james.ausmus@intel.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>

mesa/st: set min/max texture gather offset to driver-reported value

It was always getting set to -8/7 unconditionally.  Use the
driver-reported value instead.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add a way to query min/max texture gather offsets

Defaults to providing the same offsets as MIN/MAX_TEXEL_OFFSET. For
nvc0, the offset can be -32/31.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

configure.ac: require libdrm_radeon 2.4.53

We need latest radeon_drm.h.

winsys/radeon: fix a race condition in initialization of radeon_winsys::screen

Create the screen in the winsys while the mutex is locked.
This also results in a nice code cleanup!

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: fix a race condition between winsys_create and winsys_destroy

This also hides the reference count from drivers.

v2: update the reference count while the mutex is locked in winsys_create

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: fix a race condition between 2 calls to radeon_winsys_create

This fixes random crashes of: piglit/glx-multithread-shader-compile.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: remove unused radeon_info variables, move backend_map

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: unify radeon_bo::flink and radeon_bo::name

Both contained the GEM flink name.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: remove definitions already present in radeon_drm.h

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

winsys/radeon: handle squared micro tiling from GEM_GET_TILING

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

gallium/u_gen_mipmap: rewrite using pipe->blit (v2)

This replaces u_gen_mipmap with an extremely simple implementation based
on pipe->blit. st/mesa is also cleaned up.

Pros:
- less code
- correct mipmap generation for NPOT 3D textures (u_blitter uses a better
  formula)
- queries are not affected by mipmap generation if drivers disable them

v2: add "first_layer", "last_layer" parameters, drop "face"
v2.1: add format
v2.2: document the format parameter

st/mesa: properly implement MapTextureImage with multiple mapped slices (v2)

This is needed by _mesa_generate_mipmap.

This adds an array of pipe_transfers to st_texture_image. Each transfer is
for mapping a single layer.

v2: allocate the array of transfers on demand

mesa: remove the MALLOC, CALLOC and FREE macros

No longer used anywhere.  These also caused trouble in the Gallium
state tracker code where we include both core Mesa and Gallium util
headers (and the macros were defined differently in each world.)
Removing these macros should help avoid macro mix-ups in the future.

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

xlib: s/FREE/free/

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: s/FREE/free/ in vdpau code

Reviewed-by: Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Christian König <christian.koenig@amd.com>

mesa: s/FREE/free/ in _mesa_free_errors_data()

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: use malloc/free instead of MALLOC/FREE in attrib stack code

We moved away from MALLOC/FREE in the rest of core Mesa a while ago.

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/mesa: fix sampler_view REALLOC/FREE macro mix-up

We were using REALLOC() from u_memory.h but FREE() from imports.h.
This mismatch caused us to trash the heap on Windows after we
deleted a texture object.

This fixes a regression from commit 6c59be7776e4d.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

docs: Expand ARB_gpu_shader5 to describe status of individual features

This extension is a huge grab-bag of "stuff that's in DX11". Break it
apart to make it clear what still needs to be done.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>

docs: Mark off ARB_texture_view and add to release notes for 10.2.

V4: Don't claim Gen8 yet.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Enable ARB_texture_view on Gen7

V4: Don't enable this for Gen8 yet -- that still needs wired up.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Account for view parameters in blit CTSI path

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Account for MinLayer/MinLevel in blorp CTSI path

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Account for view parameters in fast depth clears

V2: - No need for layer_multiplier; multisampled depth surfaces are IMS.
    - Remove unused num_layers.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965/blorp: Account for nonzero MinLayer in layered clears.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965/blorp: Use irb->layer_count in clear

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Add layer_count to intel_renderbuffer

This is the effective layer count, for clears etc. This differs from the
depth of the miptree level when views are involved.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Pull out layer_multiplier in intel_update_renderbuffer_wrapper

We're about to need this in another place.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Add `layered` parameter to intel_update_renderbuffer_wrapper

We're about to need this so we can determine the layer count of the
wrapper.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Adjust renderbuffer wrapper to account for MinLevel/MinLayer

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Enable texture upload fast path with MinLevel

We'll still avoid MinLayer here since the fast path doesn't understand
arrays at all, but it's straightforward to do levels.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Account for MinLevel in texture upload fast path

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Adjust map/unmap code for MinLevel/MinLayer

This allows core mesa's TexSubImage paths etc to work correctly
with views which have nonzero MinLevel or MinLayer.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Don't try to use fast upload path for nontrivial views

This will eventually be relaxed, but we'll get the fallback path
working first.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Adjust surface_state emission to account for view parameters

V4: Comment style, remove magic shift.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Add _Format to intel_texobj.

This is the actual mesa_format to use. In non-view cases this is always
the same as the mt's format.

V4: Comment style

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Add driver hook for TextureView

We need to wire the original texture's mt into the view. All the hard
work of setting up an appropriate tree of gl_texture_image structures
has already been done by core mesa.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Ensure that texture validation is skipped for immutable textures.

If we were to relayout the miptree, we'd break any views that are
sharing it.

(Simplified based on suggestions from Eric)

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: refactor format selection for unsupported ETC* formats

We will need to call this to munge view formats.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: refactor format munging for separate stencil

We will need this for munging the view's format.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Include #slices in miptree debug

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

mesa: Adjust _MaxLevel computation to account for views

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

mesa: Prefer non-swizzled formats for most sized internalformats

These formats can be cast to others (with different component types or
sizes) via ARB_texture_view or ARB_shader_image_load_store. We want
them to be laid out consistently so that we can just reinterpret the
memory with a different format.

In V1, this was done conditionally on a 'prefer_no_swizzle' flag which
was set in TexStorage/TextureView paths, but we need the same behavior
for ARB_shader_image_load_store (which also works with images created
via TexImage, so we don't want it to be conditional.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Render R8G8B8X8 as R8G8B8A8

The sampler can handle R8G8B8X8 (and substitute 1.0 for the fourth
component) but we can't use it as a render target.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Pretend we don't support BRW_SURFACEFORMAT_R16G16B16_FLOAT for textures.

None of the other 3-component 16bpc formats are directly supported, so
they get promoted to XRGB equivalents. *Not* promoting RGB16F the same
way makes texture views much more fiddly -- we don't want to have to do
crazy copying behind the scenes.

(with my other master + my experimental ARB_texture_view support) fixes
the piglit test: `spec/ARB_texture_view/view compare 48bit formats`

No regressions in gpu.tests on Haswell.

V4: Don't alter the formats table -- just don't match it to a mesa_format. [Kenneth]

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Enable R10G10B10A2_UNORM format

This is supported by all generations, and is required for memory layout
consistency for texture_view.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

i965: Enable R8G8B8A8_UNORM_SRGB format

Now this is the preferred format for GL_SRGB8_ALPHA8.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

swrast: Add support for fetching from MESA_FORMAT_R10G10B10A2_UNORM

V4: Fix rebase conflicts with Brian's renaming of the texfetch
functions.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Acked-by: Eric Anholt <eric@anholt.net>

mesa: fix packing of float texels to GL_SHORT/GL_BYTE

Previously, we would unpack the texels to floats using *_TO_FLOAT_TEX,
and then pack them into the desired format using FLOAT_TO_*. Unfortunately,
this isn't quite the inverse operation, and so some texel values would
end up off-by-one.

This fixes the GL_RGB8_SNORM and GL_RGB16_SNORM subcases in piglit's
arb_texture_view-format-consistency-get test on i965. The similar 1-, 2-
and 4-component cases already worked because they took the memcpy path
rather than repacking.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>

r600g: Don't leak bytecode on shader compile failure

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74868

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

build: force .so extension for the gallium dri modules

While linux uses .so as a default extension for shared libraries that is
not the case for other platforms. The loader in libGL (and others) assumes
that the dri module will always have a .so extension, thus it will fail
to load on the affected platforms.

Spotted-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

Partially revert bba9c28 "configure: use LIB_EXT rather than hardcoded .so"

Filenames passed to dlopen() don't need to use the platform's default extension
for shared libraries.

Using the '.so' extension when dlopen()ing DRI drivers is hardcoded into mesa
and the X server, so it should be hardcoded here in the Makefile as well.

A similar fix is probably also needed for gallium DRI drivers.

(Consider that if we were starting from scratch, perhaps we would use a custom
extension like .dri instead)

Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

Partially revert "st/xa: Fix advertized version number and try to avoid future discrepancies"

This reverts commit 61bedc3d6b08943f015f9d590c07a6af36c2a92c.

As the header is the one defining the API/ABI and is distributed
during installation, we should be using it rather than re-defining
the XA version in configure.ac.

Bump the version in the header to 2.2.0, to reflect what was the
original intent of commit 42158926c6d7d3ddbe61b9a04d60544ff1b50a96.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

glx: drop obsolete _XUnlock_Mutex in __glXInitialize error path

With commit 1f1928db001(glx: Drop _Xglobal_lock while we create and
initialize glx display) we've split the big _Xglobal_lock handling in
a more fine grained manner.

Unfortunatelly we forgot to drop the unlock_mutex on the error paths,
leading to undefined behaviour as the mutex is already unlocked.

Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

freedreno/a3xx: assert() -> debug_assert()

We hit this assert with some piglit tests.  Which appears to be a bug
outside of freedreno.  Previously we were relying on assert() being
redefined to debug_assert() so that we didn't crash in release builds.
Somehow that stopped working.  So just use debug_assert() directly.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

svga: move LIST_INITHEAD(dirty_buffers) earlier in svga_context_create()

Fixes a crash in svga_context_flush_buffers() if we use the 'draw' module
for AA lines (when the device doesn't support that feature).  We need to
initialize this list before we setup the swtnl pieces.

Found/fixed by Charmaine Lee.

Cc: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

i965: Stop advertising GL_MESA_ycbcr_texture.

The "new" fragment shader backend has never supported the necessary
color conversion code for this to work.  We began using the new backend
in Mesa 7.10 for GLSL (commit a81d423d93f22a948f3aa4bf73, October 2010),
and for ARB_fragment_program in Mesa 9.1 (commit 97615b2d8c7c3cea6fd3a4,
August 2012).

I haven't heard any complaints, so I don't think anyone will miss this
feature.  I believe mplayer used it at one point, but these days
defaults to other paths anyway.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a3xx/compiler: add CEIL

fixes piglit glsl-fs-ceil

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/a3xx/compiler: fix neg mov's

create_mov() was fixed up to handle neg/abs properly for interal mov's,
using absneg.f, but forgot to fix it for TGSI MOV's.  The problem with
using add.f to handle negated mov's is that we can only take a single
const reg src.  So:

  MOV TEMP[n], -CONST[m]

would turn into:

  add.f Rdst, (neg)CONST[m], 0.0

which would not work.  Anyways, just remove the extra code and always
use create_mov() which DTRT.

This fixes piglit vs-op-neg-int test.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

radeonsi: allow fast color clear and Hyper-Z with 1D-tiled surfaces on CIK

This depends on my kernel fix. Hyper-Z is still disabled by default.

r600g,radeonsi: add a bunch of useful queries for the HUD

r600g,radeonsi: set correct initial domain for shared resources

gallium/radeon: fix warnings

tnl: Merge _tnl_vbo_draw_prims() into _tnl_draw_prims().

This should help prevent situations where we render without proper index
bounds. For example: https://bugs.freedesktop.org/show_bug.cgi?id=59455

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Remove unused sampler key fields

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: move declaration before code in etc2_unpack_rgb8()

To fix MSVC build since cb4ad1368551b.

i965: Delete "fast color clear unsupported" performance warning.

Applications frequently clear to colors other than 0.0 or 1.0, which
prevents us from doing fast color clears.  In that case, we issue this
performance warning on basically every glClear call, resulting in so
much spam that it's nearly impossible to see any other messages.

Plus, I don't think it's useful.  We aren't suggesting a better way to
do what the application developers want---we're just telling them it
would be faster to do something they don't want.

Driver developers have no control over the clear color, so this message
is totally useless to them.

A better alternative to get this sort of information is to use
INTEL_DEBUG=blorp, which tells you whether color clears were fast,
simd16 repdata, or slow.

v2: Rebase on has_color_component changes.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

freedreno/a3xx: deal with optimized tex instructions

Keep track of whether we actually have any sam instructions in the
resulting shader, rather than using TGSI SAMP declarations.  If the sam
instruction is optimized out, because the result is not used, we don't
want to emit texture state, etc.  In fact emitting sampler state and/or
setting PIXLODENABLE bit when there are no texture fetches seems to
cause lockup.

In theory this should never happen for a "normal" shader, unless the
state tracker is wonky.  But it is a very real possibility for binning
pass shaders.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

mesa: add bounds checking to eliminate buffer overrun

Decompressing ETC2 textures was causing intermitent segfault
by copying resulting 4x4 texel block to the destination texture
regardless of the size of the destination texture. Issue found
via application crash in GLBenchmark 3.0's Manhattan test.

v2: add more detail comment. Compute limit outside inner loops.
v3: add bugzilla reference
v4: Correct cc syntax in commit log
v5: really grab the right patch

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74988
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1, suggested v2-3]

st/omx/enc: cleanup omx/vid_enc.c

cleanup by moving each step into a separate function

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>