automake: anv: add missing include $(top_srcdir)/src/vulkan/util

Otherwise we'll fail to find the header and `make distcheck` will bail.

Fixes: e9dcb17962f ("vulkan/util: Add generator for enum_to_str functions")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

i965/fs: emit MOV_INDIRECT with the source with the right register type

This was hiding bugs as it retyped the source to destination's type.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

i965/fs: fix source type when emitting MOV_INDIRECT to read ICP handles

When generating the MOV INDIRECT instruction, the source type is ignored
and it is set to destination's type. However, this is going to change in a
later patch, so we need to explicitly set the proper source type.

brw_vec8_grf() creates an float type's fs_reg by default, when the
ICP handle is actually unsigned. This patch fixes these cases before
applying the aforementioned patch.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

i965/fs: fix indirect load DF uniforms on BSW/BXT

The lowered BSW/BXT indirect move instructions had incorrect
source types, which luckily wasn't causing incorrect assembly to be
generated due to the bug fixed in the next patch, but would have
confused the remaining back-end IR infrastructure due to the mismatch
between the IR source types and the emitted machine code.

v2:
- Improve commit log (Curro)
- Fix read_size (Curro)
- Fix DF uniform array detection in assign_constant_locations() when
  it is acceded with 32-bit MOV_INDIRECTs in BSW/BXT.

v3:
- Move changes in assign_constant_locations() to other patch.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

i965/fs: detect different bit size accesses to uniforms to push them in proper locations

Previously, if we had accesses with different sizes to the same uniform, we might not
push it aligned with the bigger one. This is a problem in BSW/BXT when we access
an array of DF uniform with both direct and indirect addressing because for the latter
we use 32-bit MOV INDIRECT instructions. However this problem can happen with other
generations and bitsizes.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

i965/fs: mark last DF uniform array element as 64 bit live one

This bug can make that we don't detect the end of a contiguous area
correctly and push larger areas than the real ones.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

radv: fix txs for sampler buffers

I messed this up when I wrote it, this fixes:
dEQP-VK.memory.pipeline_barrier.*uniform_texel_buffer.*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

amd/common: fix ASICREV_IS_POLARIS11_M for Polaris12

Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Don't allocate space for unused immutable samplers.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/ac: Use constants for immutable samplers.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Detect if all immutable samplers for a binding are equal.

We can then use constants for indexed loads.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Store the immutable samplers as uint32_t[4].

So we don't need to know about radv_sampler in ac_nir_to_llvm.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

egl/dri3: implement query surface hook

This is a DRI3 version of a change made for DRI2
(4d6d4f939e0af4252e0b, "egl/dri2: implement query surface hook"),
that fixed failures in dEQP-EGL.functional.resize.surface_size.grow
and dEQP-EGL.functional.resize.surface_size.shrink.

Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Chad Versace <chadversary@chromium.org>
Signed-off-by: Brendan King <Brendan.King@imgtec.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>

gallium/radeon: Add libamd_common.a to TARGET_LIB_DEPS also for r600

Fixes build failure with --enable-opencl --enable-xvmc:

make[4]: Entering directory '/home/daenzer/src/mesa-git/mesa/build-amd64/src/gallium/targets/xvmc'
  CXXLD    libXvMCgallium.la
../../../../src/gallium/drivers/r600/.libs/libr600.a(evergreen_compute.o): In function `evergreen_create_compute_state':
/home/daenzer/src/mesa-git/mesa/build-amd64/src/gallium/drivers/r600/../../../../../src/gallium/drivers/r600/evergreen_compute.c:254: undefined reference to `ac_elf_read'
../../../../src/gallium/drivers/r600/.libs/libr600.a(evergreen_compute.o): In function `r600_shader_binary_read_config':
/home/daenzer/src/mesa-git/mesa/build-amd64/src/gallium/drivers/r600/../../../../../src/gallium/drivers/r600/evergreen_compute.c:189: undefined reference to `ac_shader_binary_config_start'
/home/daenzer/src/mesa-git/mesa/build-amd64/src/gallium/drivers/r600/../../../../../src/gallium/drivers/r600/evergreen_compute.c:189: undefined reference to `ac_shader_binary_config_start'
collect2: error: ld returned 1 exit status
Makefile:760: recipe for target 'libXvMCgallium.la' failed

Fixes: dc4c551a345d ("radeon/ac: switch from radeon_elf_read() to ac_elf_read()")
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Timothy Arceri <tarceri@itsqueeze.com>

i965: Move intel_resolve_map.[ch] from i965_compiler_FILES to i965_FILES

I have no idea why these were part of the compiler files.  They're
miptree related code, and the compiler doesn't appear to use them.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

gallium/r600: fix r600 build when OpenCL is enabled

Fixes build regression caused by d90bf4ef3e1db7

radeon: remove unused radeon_elf_util.{c,h}

We now use the shared code in AMD common instead.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/ac: switch to ac_shader_binary_config_start()

For radeonsi we could probably switch to
ac_shader_binary_read_config(). However the functions have
diverged so just share this helper for now.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/ac: make ac_shader_binary_config_start() available externally

The read config functions are different for r600 and radeonsi so
we can't just share the one in amd common. So just share this
instead.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/ac: switch from radeon_elf_read() to ac_elf_read()

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/ac: switch from radeon_shader_binary to ac_shader_binary

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/ac: add llvm_ir_string to ac_shader_binary struct

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ralloc: Delete autofree handling.

There was exactly one user of this, and I just removed it.

It also accessed an implicit global context, with no locking.  This
meant that it was only safe if all callers of ralloc_autofree_context()
held the same lock...which is a pretty terrible thing for a utility
library to impose.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

compiler: Free types in _mesa_glsl_release_types() rather than autofree.

Instead of using ralloc_autofree_context() to install an atexit()
handler to ralloc_free(glsl_type::mem_ctx), we can simply free them
from _mesa_glsl_release_types().

This is effectively the same, because _mesa_glsl_release_types() is
called from _mesa_destroy_shader_compiler(), which is called from Mesa's
one_time_fini() function, which Mesa installs as an atexit() handler.

The one advantage here is that it ensures the built-in functions are
destroyed before the types.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

clover: Dump linked binary to a different file

this allows to pass the generated files directly to llc or bugpoint

v2: add atomic counter ID
v3: remove extra scope operator, constify

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

radv: fix depth format in blit2d.

For blitting we need to use the depth or stencil format, never
the combined.

This fixes:
dEQP-VK.texture.shadow.2d.nearest.less_or_equal_d32_sfloat_s8_uint
and a few others.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/formats: add fast clear for 8-bit signed ints.

These formats are used by some CTS tests, may as well fill them in.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/main: refactor sampler parameter error codepath

This is similar to what we do in the texture error codepath.
While we are at it, update the specification comment with
latest GL 4.5 spec.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: reject samplers not declared as uniform/function params earlier

This improves consistency with image variables and atomic
counters which are already rejected the same way.

Note that opaque variables can't be treated as l-values, which
means only the 'in' function parameter is allowed.

v2: rewrite commit message

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v2)

glsl: use is_sampler() anywhere it's possible

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: use is_image() anywhere it's possible

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl: add missing blend_support qualifier in validate_flags()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>

glsl: use an enum for AMD_conservative_depth layout qualifiers

The main idea behind this is to free some bits in the flags.q
struct because currently all 64-bits are used and we can't
add more layout qualifiers without reaching a static assert.

In order to do that (mainly for ARB_bindless_texture), use an
enumeration for the AMD_conservative_depth layout qualifiers
because it's forbidden to declare more than one depth qualifier
for gl_FragDepth.

Note that ast_type_qualifier::merge_qualifier() will prevent
using duplicate layout qualifiers by returning a compile-time
error.

No piglit regressions found (including compiler tests) with
RX480 on RadeonSI.

v2: use a switch case

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Andres Gomez <agomez@igalia.com> (v1)

glsl: add has_shader_image_load_store()

Preliminary work for ARB_bindless_texture which can interact
with ARB_shader_image_load_store.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

drirc: add force_glsl_version=440 for The Culling

This game uses GLSL 430 but the interpolation qualifiers in
some shaders don't match, which ends up in a link error. GLSL
440 spec removed this restriction, force it.

This fixes the following link error, as well as serious
rendering problems.

error: vertex shader output `out_TEXCOORD1' specifies noperspective
interpolation qualifier, but fragment shader input specifies no
interpolation qualifier

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

anv: Bump advertised version to 1.0.42

We've been following the spec changes.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

vulkan: Update registry and headers to 1.0.42

This brings in a bunch of new extensions

nir: Delete unused arg in get_iteration

nir_const_value is not needed in get_iteration

Signed-off-by: Elie Tournier <tournier.elie@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs: fix a few typos

Noticed a couple, found the rest using vimspell.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

gallium/u_queue: set num_threads correctly if not all threads start

If i-th thread could not be created it means we have i threads,
not i+1, because we start from 0.

Fixes: 404d0d5 "gallium/u_queue: add an option to have multiple worker threads"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

gallium/u_queue: fix a crash with atexit handlers

Commit 4aea8fe ("gallium/u_queue: fix random crashes when the app calls
exit()") added a atexit handler which calls
util_queue_killall_and_wait() for each queue to stop the threads.
However the app is also free to use atexit handlers to clean up things,
leading to util_queue_destroy() call which will also call
util_queue_killall_and_wait() for the same queue again, causing threads
being joined twice, and that is undefined. This happens with libglut,
for example. A simple fix is to just set num_threads to 0 as there are
no more valid threads after util_queue_killall_and_wait() returns.

Fixes: 4aea8fe "gallium/u_queue: fix random crashes when the app calls exit()"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

radv: Use correct size for availability flag.

Per spec, VK_QUERY_RESULT_64_BIT specifies the integer size and the
availability flag is an integer. We apparently handled this correctly
already for the copy to buffer case.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>

radv: Only use PKT3_OCCLUSION_QUERY when it doesn't hang.

PKT3_OCCLUSION_QUERY hangs when used in a nested IB. This only
calls it when in a primary command buffer and we change
GetQueryPoolResults to not need it. CmdCopyQueryPoolResults
still needs it so we break that behavior for secondary command buffers.
However, that would hang already and using an unitialized value is
better than a hang.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>

radv: Reset emitted compute pipeline when calling secondary cmd buffer.

Otherwise if the new compute pipeline is the same as the last used
pipeline before the call, we don't emit it again.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>

radv: add support for NV_dedicated_allocation

This adds initial support for NV_dedicated_allocation, then
uses it for the wsi image/memory allocation paths internally
in the driver.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/winsys: fix freeing imported memory.

This bo->fd wasn't setting some stuff correctly that could
lead to crashes for anything using this path later.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

vulkan/wsi/radv: add initial prime support (v1.1)

This is a complete rewrite of my previous rfc patches.

This adds the ability to present to a different GPU that rendering
using a driver side operation that can copy from the tiled to
linear shared image.

This does prime support completely in the swapchain present code,
and each queue has a precreated command buffer for each image
and for the each queue family. This means presenting should work
on graphics and compute queues and transfer in the future.

v1.1: initialise needs_linear_copy in swapchain.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/ac: Add integer->integer casts.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>

check: add support for running test as standalone

Signed-off-by: Eric Engestrom <eric@engestrom.ch>

check: make any failure fatal

Previously, only the last error code was returned.
Using `set -e` makes the script quit on any unhandled error.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>

check: mark two tests are requiring bash

Requirement was removed just before pushing, but it's actually needed
for heredocs (`<<<`).

Signed-off-by: Eric Engestrom <eric@engestrom.ch>

st/nine: Drop USER_INDEX_BUFFERS check

This fixes 4a883966c1f74f43afc145d2c3d27af7b8c5e01a where the
PIPE_CAP was removed.

Now USER_INDEX_BUFFERS are always enabled remove the check and only
check for cmst_active directly.

v2: Axel pointed out the code was still needed when cmst was inactive,
    Rebase on master too
v3: Drop struct member user_ibufs also && fixup shortlog (Edward).
v4: Fix negation
v5: Use the right variable name csmt != cmst

Fixes: 4a883966c1f7 ("gallium: remove PIPE_CAP_USER_INDEX_BUFFERS")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99953
Reported-and-tested-by: Vinson Lee <vlee@freedesktop.org> (v1)
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

st/nine: make use of common uploaders v4

Make use of common uploaders that landed recently to Mesa

v2: fixed formatting, broken due to thunderbird configuration

v3: per Axel comment: added a comment into NineDevice9_DrawPrimitiveUP

v4: per Axel comment: changed style of the comment

compiler: style clean-ups in blob.h

Reviewed-by: Elie Tournier <tournier.elie@gmail.com>

svga: fix MSVC build error after PIPE_CAP_USER_INDEX_BUFFERS removal

Need to specify the zero for the struct initializer.  My earlier test
of the patch series was with MinGW, not MSVC.

Trivial.

vc4: Lazily emit our FS/VS input loads.

This reduces register pressure in both types of shaders, by reordering the
input loads from the var->data.driver_location order to whatever order
they appear first in the NIR shader.  These instructions aren't
reorderable at our QIR scheduling level because the FS takes two in
lockstep to do an interpolation, and the VS takes multiple read
instructions in a row to get a whole vec4-level attribute read.

shader-db impact:
total instructions in shared programs: 76666 -> 76590 (-0.10%)
instructions in affected programs:     42945 -> 42869 (-0.18%)
total max temps in shared programs: 9395 -> 9208 (-1.99%)
max temps in affected programs:     2951 -> 2764 (-6.34%)

Some programs get their max temps hurt, depending on the order that the
load_input intrinsics appear, because we end up being unable to copy
propagate an older VPM read into its only use.

vc4: Refactor the load_input code out of the intrinsic code.

It's going gain most of ntq_setup_inputs(), so simplify it first.

vc4: Track the last block we emitted at the top level.

This will be used for delaying our VPM reads (which must be unconditional)
until just before they're used.

vc4: Emit max number of temps in the shader-db output.

We need to be paying attention to optimization's impact on this -- even if
we reduce instruction count, increasing max temps in general is likely to
cause us to fail to register allocate on some shaders, which means that
those won't run at all.

util/disk_cache: Use backward compatible st_mtime.

Fix Mac OS X build error.

  CC       libmesautil_la-disk_cache.lo
In file included from disk_cache.c:46:
./disk_cache.h:57:20: error: no member named 'st_mtim' in 'struct stat'
   *timestamp = st.st_mtim.tv_sec;
                ~~ ^

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99918
Fixes: 207e3a6e4b ("util/radv: move *_get_function_timestamp() to utils")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: Fix missing-braces warning.

  CXX    glsl/ast_to_hir.lo
glsl/ast_to_hir.cpp: In member function 'virtual ir_rvalue* ast_declarator_list::hir(exec_list*, _mesa_glsl_parse_state*)':
glsl/ast_to_hir.cpp:4846:42: warning: missing braces around initializer for 'unsigned int [16]' [-Wmissing-braces]

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Andres Gomez <agomez@igalia.com>

ac: silence a warning

trivial

radeonsi: fix broken tessellation on Carrizo and Stoney

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99850

Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

st/mesa: don't update unrelated states in non-draw calls such as Clear

If a VAO isn't bound and u_vbuf isn't enabled because of the Core profile,
we'll get user vertex buffers in drivers if we update vertex buffers
in glClear. So don't do that.

This fixes a regression since disabling u_vbuf for Core profiles.

Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: set blend state for PBO readbacks

v2: restore the state

Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: reset sample_mask, min_sample, and render_condition for PBO ops

Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: don't check st->vp in update_clip

The clip state is updated before VS, so it can be NULL for the first draw
call. Just remove the unnecessary dependency on st->vp.

Reviewed-by: Brian Paul <brianp@vmware.com>

trace: remove pipe_resource wrapping

Not needed. ddebug does the same thing. The limitation is that drivers
can only use pipe_resource::screen through pipe_resource_reference.

This unbreaks trace, because pipe_context uploaders aren't wrapped,
so trace doesn't understand buffers returned by them.

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium: remove PIPE_CAP_USER_INDEX_BUFFERS

all drivers support it

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com> (VMware driver only)

st/mesa: assume all drivers support user index buffers

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com> (VMware driver only)

svga: implement user index buffers

Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com> (VMware driver only)

freedreno: add support for user index buffers

Reviewed-by: Brian Paul <brianp@vmware.com>

etnaviv: add support for user index buffers

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/util: add new helpers for user index buffer uploading

v3: split from the etnaviv patch; fix new_ib.buffer leak

Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com> (VMware driver only)

nir: delete magic number

Signed-off-by: Elie Tournier <tournier.elie@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

gallium/util: (trivial) fix util_clear_render_target

the format of the rt can be different than the one of the texture, so must
propagate the format explicitly to the helper. Broken since
3f9c5d62441eba38e8b1592aba965ed5db6fd89b (but unused by st/mesa).

util: automake: add sha1/README to the tarball

Suggested-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mapi: remove unused mapi.[ch]

The final user of it was st/vega.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>

blorp: automake: add TODO to the tarball

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>

anv: automake: add TODO to the tarball

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>

vc4: automake: add the kernel/README to the tarball

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>

nir: automake: add the README to the tarball

Similar to other accompanying documentation we have in-tree.
For example glsl/README.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>

radv/entrypoints: Only generate entrypoints for supported features

This changes the way radv_entrypoints_gen.py works from generating a
table containing every single entrypoint in the XML to just the ones
that we actually need.  There's no reason for us to burn entrypoint
table space on a bunch of NV extensions we never plan to implement.

RADV implements VK_AMD_draw_indirect_count, so add that to the list.

Port of 114c281e707919a1420d3a20219ce4392d8b360d
"and/entrypoints: Only generate entrypoints for supported features"

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>

main/performance_query: s/GLboolean/bool/

Ideally would have caught these when adding the interface but this just
switches a few return types for the INTEL_performance_query backend
interface to bool instead of GLboolean.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: replace linear entrypoint search with binary search

Tested with dEQP-EGL.functional.get_proc_address.*

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl: make sure entrypoints list is always sorted

Starting with the next commit, badly sorting this list will break the
eglGetProcAddress().

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl: distribute all tests

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: move entrypoints list out to its own file

This will allow us to make sure the list is always sorted in the next
commit.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: sort entrypoints list

Let's make that comment true.
If will also be necessary in a couple commits (using bsearch).

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: use macro to map entrypoints to functions

As of the last 3 commits, there's a function for each entrypoint.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: add entrypoint for eglClientWaitSyncKHR

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: add entrypoint for eglDestroySyncKHR

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

eglapi: add entrypoint for eglDestroyImageKHR

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/va: Fix up YV12 to NV12 putImage conversion

Use the utility u_copy_nv12_from_yv12 to implement this similarly to
how it's been done in the VPAU state tracker. The old code mixed up
planes and fields and didn't correctly handle video surfaces in
interlaced format.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

st/vdpau: Provide YV12 to NV12 putBits conversion v2

mplayer likes putting YV12 data, and if there is a buffer format mismatch,
the vdpau state tracker would try to reallocate the video surface as an
YV12 surface. A virtual driver doesn't like reallocating and doesn't like YV12
surfaces, so if we can't support YV12, try an YV12 to NV12 conversion
instead.

Also advertize that we actually can do the getBits and putBits conversion.

v2: A previous version of this patch prioritized conversion before
reallocating. This has been changed to prioritize reallocating in this version.

Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

configure.ac: check require_basic_egl only if egl enabled

Otherwise the configuration fails when building independant libs
like vdpau, vaapi or omx

Fixes: 1ac40173c2a ("configure.ac: simplify EGL requirements for
drivers dependent on EGL")

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>

glx: add GLXdispatchIndex sort check

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs: update features.txt for GL_ARB_clear_texture with llvmpipe and softpipe

Signed-off-by: Lars Hamre <chemecse@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

softpipe: enable clear_texture with util_clear_texture

Passes all corresponding piglit tests.

Signed-off-by: Lars Hamre <chemecse@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

llvmpipe: enable clear_texture with util_clear_texture

Passes all corresponding piglit tests.

Signed-off-by: Lars Hamre <chemecse@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>