gallium/hud: fix memory leaks

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: enable displayable DCC on Ravens

radeonsi: add support for displayable DCC for multi-RB chips

A compute shader is used to reorder DCC data from aligned to unaligned.

radeonsi: add support for displayable DCC for 1 RB chips

This is the simpler codepath - just disable RB and pipe alignment for DCC.

radeonsi: add ability to bind images as image buffers

so that we can bind DCC (texture) as an image buffer.

radeonsi/gfx9: add support for PIPE_ALIGNED=0

Needed by displayable DCC.

We need to flush L2 after rendering if PIPE_ALIGNED=0 and DCC is enabled.

amd/addrlib: fix uninitialized values for Addr2ComputeDccAddrFromCoord

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

iris: move variable to the scope where it is being used

iris_upload_border_color is passed a pointer which points to
variable that is introduced in a different scope.

CID: 1444296
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/nir: run st_nir_opts after 64bit ops lowering

CID: 1444309
Fixes: 9ab1b1d0227 "st/nir: Move 64-bit lowering later"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

panfrost: Size tiled temp buffers correctly

This should lower transient memory usage and improve performance
slightly (due to less memory to malloc/free, better cache locality,
etc).

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Respect box->width in tiled stores

This fixes a regression uploading partial tiled textures introduced
sometime during the cubemap series.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Cleanup some indirection in pan_resource

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Implement system values

This patch implements system values via specially-crafted uniforms.
While we previously had an ad hoc system for passing the viewport into
the vertex shader, this commit generalizes the system to allow for
arbitrary system values to be added to both shader stages. While we're
at it, we clean up uniform handling code (which was considerably muddied
to handle the ad hoc viewport uniform).

This commit serves as both a cleanup of the existing codebase and the
precursor to new functionality, like implementing textureSize().

Concurrent with these changes is respecting the depth transform, which
was not possible with the old fixed uniform system and here serves as a
proof-of-correctness test (as well as justifying the NIR changes).

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

nir: Add "viewport vector" system values

While a partial set of viewport system values exist, these are scalar
values, which is a poor fit for viewport transformations on vector ISAs
like Midgard (where the vec3 values for scale and offset each need to be
coherent in a vec4 uniform slot to take advantage of vectorized
transform math). This patch adds vec3 scale/offset fields corresponding
to the 3D Gallium viewport / glViewport+depth

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Anholt <eric@anholt.net>

virgl: also destroy all read-transfers

For texture write-transfers, we either free them on the transfer-queue
or right away. But for read-transfers, we currently only destroy them in
case they used a temp-resource. This leads to occasional resource-leaks.

Let's add a call to virgl_resource_destroy_transfer in the missing case.

Do the same thing for buffers as well, but the logic is a bit easier to
follow there.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: f0e71b10888 ("virgl: use transfer queue")
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

meson: Error if LLVM is turned off but clover it turned on

Since clover has a hard requirement on LLVM

v2: - make error message more specific

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

meson: Error if LLVM doesn't have rtti when building clover

We already do this for nouveau, but it's required for clover too.

panfrost: Remove support for legacy kernels

Previously, there was minimal support for interoperating with legacy
kernels (reusing kernel modules originally designed for proprietary
legacy userspaces, rather than for upstream-friendly free software
stacks). Now that the Panfrost kernel is stabilising, this commit drops
the legacy code path.

Panfrost users need to use a modern, mainline kernel supporting the
Panfrost kernel driver from this commit forward.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

etnaviv: only try to construct scanout resource when on KMS winsys

Trying to construct a scanout capable buffer will only ever work when
when we are on top of a KMS winsys, as the render node isn't capable
of allocating contiguous buffers.

Tested-by: Marius Vlad <marius.vlad@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: flush all pending contexts when accessing a resource with the CPU

When setting up a transfer to a resource, all contexts where the resource
is pending must be flushed. Otherwise a write transfer might be started
in the current context before all contexts that access the resource in
shared (read) mode have been executed.

Fixes: 64813541d575 (etnaviv: fix resource usage tracking across
different pipe_context's)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-By: Guido Günther <agx@sigxcpu.org>

etnaviv: don't flush own context when updating resource use

The context is self synchronizing at the GPU side, as commands are
executed in order. We must not flush our own context when updating the
resource use, as that leads to excessive flushing on effectively every
draw call, causing huge CPU overhead.

Fixes: 64813541d575 (etnaviv: fix resource usage tracking across
different pipe_context's)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

etnaviv: shrink struct etna_3d_state

Drop struct members which are only written to but never read from.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

intel/compiler: use defined size for vector components

If we increase vector sizing later it would be nice to avoid
tripped over this again.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir: use proper array sizing define for vectors

If we increase the vector size in the future it would be good
to not have to fix these up, this should change nothing at present.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

Revert "nir: propagate known constant values into the if-then branch"

This reverts commit 4218b6422cf1ff70c7f0feeec699a35e88522ed7.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110311

nir: propagate known constant values into the if-then branch

Helps Max Waves / VGPR use in a bunch of Unigine Heaven
shaders.

shader-db results radeonsi (VEGA):
Totals from affected shaders:
SGPRS: 5505440 -> 5505872 (0.01 %)
VGPRS: 3077520 -> 3077296 (-0.01 %)
Spilled SGPRs: 39032 -> 39030 (-0.01 %)
Spilled VGPRs: 16326 -> 16326 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 744 -> 744 (0.00 %) dwords per thread
Code Size: 123755028 -> 123753316 (-0.00 %) bytes
Compile Time: 2751028 -> 2560786 (-6.92 %) milliseconds
LDS: 1415 -> 1415 (0.00 %) blocks
Max Waves: 972192 -> 972240 (0.00 %)
Wait states: 0 -> 0 (0.00 %)

vkpipeline-db results RADV (VEGA):

Totals from affected shaders:
SGPRS: 160 -> 160 (0.00 %)
VGPRS: 88 -> 88 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 18268 -> 18152 (-0.63 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 26 -> 26 (0.00 %)
Wait states: 0 -> 0 (0.00 %)

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

virgl: close drm fd when destroying virgl screen.

This fd was create in virgl_drm_screen_create and should be closed
in virgl_drm_screen_destroy.

Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

iris: Enable fast clears on gen8.

Since we are now properly storing the clear color with SCS bits, we can
now enable fast clears on gen8 too.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Add aux.sampler_usages.

We want to skip some types of aux usages (for instance,
ISL_AUX_USAGE_HIZ when the hardware doesn't support it, or when we have
multisampling) when sampling from the surface.

Instead of checking for those cases while filling the surface state and
leaving it blank, let's have a version of aux.possible_usages for
sampling. This way we can also avoid allocating surface state for the
cases we don't use.

Fixes: a8b5ea8ef015ed4a "iris: Add function to update clear color in surface state."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Do not allocate clear_color_bo for gen8.

Since we are not using it for the clear color, there's no need to
allocate it.

Fixes: a8b5ea8ef015ed4a "iris: Add function to update clear color in surface state."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Manually apply fast clear color channel overrides.

At the fast clear time, the only swizzle we have available is actually
the identity swizzle (which we use for most rendering). So the call to
swizzle_color_value() becomes simply a no-op, and doesn't properly zero
out the unused channels.

We have to manually override those channels.

Fixes: a8b5ea8ef015ed4a "iris: Add function to update clear color in surface state."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris/gen8: Re-emit the SURFACE_STATE if the clear color changed.

The swizzle for rendering surfaces is always identity. So when we are
doing the fast clear, we don't have enough information to store the
clear color OR'ed with the Shader Channel Select bits for the dword in
the SURFACE_STATE.

Instead of trying to patch up the SURFACE_STATE correctly later, by
reading the color from the clear color state buffer and then doing all
the operations to store it, let's just re-emit the whole SURFACE_STATE.
That should make things way simpler on gen8, and we can still use the
clear color state buffer for gen9+.

Fixes: a8b5ea8ef015ed4a "iris: Add function to update clear color in surface state."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

iris: Only update clear color for gens 8 and 9.

Newer gens can read it directly.

Also properly skip updating the ISL_AUX_USAGE_NONE surface.

Fixes: a8b5ea8ef015ed4a "iris: Add function to update clear color in surface state."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

haiku: Fix hgl dispatch build. Tested under meson/scons.

Reviewed-by: Brian Paul <brianp@vmware.com>

docs: Fix 19.0.x version numbers

The list has 19.0.2 twice.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

docs/relnotes: document parallel_shader_compile changes in 19.1.0, not 19.0.0

CI: use wayland ci-templates repo to create the base image

There shouldn't be a difference for users, but this way we do manage
all of our containers from freedesktop.org

note: compared to the provious Dockerfile, we need to manually
      add gcc, g++ and python*-wheel

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

radeonsi: don't use PFP_SYNC_ME with compute-only contexts

Compute rings don't have PFP.

Fixes: a1378639ab1 "radeonsi: always use compute rings for clover on CI and newer (v2)"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Jan Vesely <jan.vesely@rutgers.edu>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

virgl: define MAX_VERTEX_STREAMS based on availability of TF3

Since with gles hosts we lie about the GLSL feature level it is better
to set the number of streams based on actual hosts capabilities.

v2: Make use of feature check level to avoid regressions.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-By: Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

softpipe: Implement ATOMFADD and enable cap TGSI_ATOMFADD

This enables the following piglits with PASS:
  nv_shader_atomic_float/execution/
    shared-atomicadd-float
    shared-atomicexchange-float
    ssbo-atomicadd-float
    ssbo-atomicexchange-float

v2: Minimize the patch by using type punning (Eric Anholt)

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

virgl: stricter usage of compressed 3d textures

Using RGTC, ETC1, ETC2 or S3TC for 3D-textures isn't alowed by any of
OpenGL 4.6, OpenGL ES 3.2, ARB_texture_compression_rgtc,
EXT_texture_compression_rgtc, OES_compressed_ETC1_RGB8_texture,
S3_s3tc or EXT_texture_compression_s3tc specifications.

So let's not allow any of those compressed 3d-textures at all. It's not
going to work once it hits the OpenGL driver in virglrenderer.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

virgl: do not allow compressed formats for buffers

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>

dri3: Return the current swap interval from glXGetSwapIntervalMESA().

We were caching only the value set with glXSwapIntervalSGI(), missing out
on the default setting of the swap interval by the loader.  This fixes
glxgears's warning about being vblank synchronized by default.

Fixes: 9777c4234b0e ("loader: drop the [gs]et_swap_interval callbacks")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

intel: Add support for Comet Lake

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

iris: Adapt to variable ppGTT size

Not all hardware is made equal and some does not have the full
complement of 48b of address space. Ask what the actual size of virtual
address space allocated for contexts, and bail if that is not enough to
satisfy our static partitioning needs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radv: partially enable VK_KHR_shader_float16_int8

Only 8-bit integers for now, float16 requires a bit more work.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: add 8-bit and 64-bit support to ac_build_bitfield_reverse()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: add 8-bit support to ac_build_umsb()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: add 8-bit support to ac_find_lsb()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: add 8-bit support to ac_build_bit_count()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/nir: add support for nir_op_b2i8

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: implement ARB/KHR_parallel_shader_compile callbacks

util/queue: add util_queue_adjust_num_threads

for ARB_parallel_shader_compile

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

util/queue: hold a lock when reading num_threads in util_queue_finish

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

util/queue: add ability to kill a subset of threads

for ARB_parallel_shader_compile

util/queue: move thread creation into a separate function

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

gallium: implement ARB/KHR_parallel_shader_compile

mesa: implement ARB/KHR_parallel_shader_compile

Tested by piglit.

radeonsi: fix assertion failure by using the correct type

src/gallium/drivers/radeonsi/si_state_viewport.c:196: si_emit_guardband:
Assertion `vp_as_scissor.maxx <= max_viewport_size[vp_as_scissor.quant_mode]
&& vp_as_scissor.maxy <= max_viewport_size[vp_as_scissor.quant_mode]' failed.

The comparison was unsigned, so negative maxx or maxy would fail.

Fixes: 3c540e0a7488 "radeonsi: Fix guardband computation for large render targets"

radeon/vcn/vp9: search the render target from the whole list

The number of render targets could be more than max of references,
so we search the full list of the render pictures for the current
render target index

https://bugs.freedesktop.org/show_bug.cgi?id=109648

Signed-off-by: Leo Liu <leo.liu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Acked-by: James Zhu<James.Zhu@amd.com>
Cc: <mesa-stable@lists.freedesktop.org>

radv: lower 16-bit flrp

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

ac: fix ac_build_umsb() for 16-bit integer type

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: fix ac_find_lsb() for 16-bit integer type

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: fix ac_build_bitfield_reverse() for 16-bit integer type

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac: fix ac_build_bit_count() for 16-bit integer type

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

ac/nir: fix nir_op_b2i16

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

meson: strip rpath from megadrivers

More specifically, use the library file that has been post-processed by Meson
when creating the hardlinks.

Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108766
Fixes: 3218056e0eb375eeda47 "meson: Build i965 and dri stack"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

spirv: fix a compiler warning

Fixes implicit conversion from enumeration type 'SpvOp' warning.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: perf: update render basic configs for big core gen9/gen10

This updates allows an MI_LRI to trigger a OA report write in the
global OA buffer. This isn't really useful for us, we just keep close
to the internal public configs.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: add ring busyness metric for cfl gt2

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: enable Icelake metrics

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: add Icelake metrics

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: sklgt2: drop programming of an unused NOA register

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: hsw: drop register programming not needed on HSW

This register is flagged as IVB only in the documentation.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: chv: fixup counters names

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: add PMA stall metrics

These are new metrics for Gen8/9 to measure the effect of the PMA
stall workaround fix.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: sklgt2: update memory write config

This rework the programming between older pre-production steppings &
new ones.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: sklgt2: update compute metrics config

This unifies some of the programming between pre-production stepping
and production ones.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: perf: sklgt2: update a priority for register programming

This makes no difference in term of programming, it's just a cleanup.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

panfrost: Implement FIXED formats

Fixes crash in dEQP-GLES2.functional.draw.random.9

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Fix index calculation types and asserts

Fixes crash in
dEQP-GLES2.functional.draw.draw_elements.points.single_attribute.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Clean index state between indexed draws

Fixes subsequent tests in
dEQP-GLES2.functional.draw.draw_elements.indices.*

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/decode: Print negative_start

This property slipped through..

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Implement missing texture formats

 - Implements RGB565/RGBA5551 formats
 - Don't advertise support for flipped RGBA5551 and ETC

Fixes remaining tests in dEQP-GLES2.functional.texture.format.* which is
now at 36/36.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Extend tiling for cubemaps

transfer_unmap now tiles for any tiled resource, not just TEXTURE_2D,
which should more than just cubemaps!

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Implement command stream for linear cubemaps

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/midgard: Emit cubemap coordinates

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Include all cubemap faces in bitmap list

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/decode: Decode all cubemap faces

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Preliminary work for cubemaps

Again, not yet functional, but this sets up the memory management for
cube maps.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/midgard: Add L/S op for writing cubemap coordinates

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/midgard: Disassemble `cube` texture op

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Fix vertex buffer corruption

Fixes crash in dEQP-GLES2.functional.buffer.*

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

iris: fix set_sampler_view

Update to match docs.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/docs: clarify set_sampler_views (v2)

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

freedreno/ir3: convert to "new style" frag inputs

Add support for load_barycentric_pixel, load_interpolated_input, and
friends.  For now, this retains support for old-style inputs, which can
probably be dropped with some ttn work.

Prep work for sample-shading support.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: add pass to move varying loads

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: rework varying packing

Originally we kept track of a table of inputs.  But with new-style frag
inputs this becomes awkward.  Re-work it so that initially we assigned
un-packed varying locations, and then after the shader is compiled scan
to find actual used inputs, and re-pack.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: re-indent comment

Make it more clear that it applies to the following 'case' statements,
rather than the previous one.

Signed-off-by: Rob Clark <robdclark@gmail.com>

nir: add lower_all_io_to_elements

I need this part of lower_all_io_to_temps but without the actual
lowering to temps part.

Signed-off-by: Rob Clark <robdclark@gmail.com>