configure.ac: move enable-gallium-llvm dependency with-gallium-drivers

... to where it's applicable.

Since we effectively made --enable-gallium-llvm mean --enable-llvm with
earlier commits, we need to move the requirement to guard the compnents
added for the LLVM draw.

Otherwise we'll error (as below) when building RADV w/o gallium drivers.

configure: error: --enable-gallium-llvm is required when building radv

v2: Don't remove but move the dependency (Tobias).

Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>

configure.ac: Mandate --enable-gallium-llvm when checking LLVM version

With this change we effectively require --enable-gallium-llvm when
building RADV. This should be perfectly safe since the gallium radeonsi
driver already explicitly requires it.

The "gallium" part in --enable-gallium-llvm is about to be removed soon
(not in stable), but until then make sure that things can build.

To reflect the requirement (as opposed to check previously) we rename
llvm_check_version_for to llvm_require_version

Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>

configure.ac: Rename the  gallium_require_llvm helper

Drop the gallium prefix since we're about it use it throughout the
configure.

Note we do want to check for enable_gallium_llvm check since (as
explicitly requested) the toggle should mean --enable-llvm. Latter of
which to be resolved with later patches.

Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>

configure.ac: Don't check LLVM version in require_llvm

This is actually not needed because the version is checked later.

Around line 2380
if test "x$enable_gallium_llvm" == "xyes"; then
    llvm_check_version_for $LLVM_REQUIRED_GALLIUM "gallium"
    llvm_add_default_components "gallium"
fi

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Cc: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
v2: [Emil Velikov: rebase/respin series order]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

configure.ac: move AC_ARG_ENABLE([gallium-llvm] hunk further up

With next commits we'll require --enable-gallium-llvm (en route to a
greater good later on) for RADV. The latter is required to ensure that
as otherwise we'll fail to build.

Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>

configure.ac: remove unused AC_SUBST([MESA_LLVM])

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>

loader: unconditionally include unistd.h and stdlib.h

Otherwise we would fail with "implicit declaration of function" geteuid
and getenv respectively.

To trigger (re)move the libdrm.pc file and use the following:

 $ ./autogen.sh --disable-egl --disable-gbm --disable-dri \
    --with-dri-drivers=swrast --with-gallium-drivers=swrast
 $ make

Cc: Vinson Lee <vlee@freedesktop.org>
Fixes: 3f462050c ("loader: Add an environment variable to override driver name choice.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99701
v2: [Emil: handle stdlib.h add commit message]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

intel/blorp: do not return const data by get_px_size_sa()

Not much point in the const qualifier since we provide a copy to the
user. Resolves the following -Wignored-qualifiers warning.

src/intel/blorp/blorp_blit.c:1857:8: warning: 'const' type qualifier on
return type has no effect [-Wignored-qualifiers]

v2: keep const qualifier of local variable.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

gallium/radeon: use staging for texture read mappings from GTT WC

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: ignore the level parameter in buffer_transfer_map

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: fix performance of buffer readbacks

We want cached GTT for all non-persistent read mappings.
Set level = 0 on purpose.

Use dma_copy, because resource_copy_region causes a failure in the PBO
read of piglit/getteximage-luminance.

If Rocket League used the READ flag, it should get cached GTT.

v2: mask out UNSYNCHRONIZED

Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: align vertex buffer descriptor list size for optimal prefetch

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: align shader binaries to CP DMA alignment for optimal prefetch

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move CP_DMA_ALIGNMENT definition

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove SI_CONTEXT_FLUSH_AND_INV_FRAMEBUFFER

not necessary

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove separate CB/DB_META flush flags

not used separately

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: reduce the number of FMASK input coordinates

Before:
  image_load v3, v[0:3] ...
After:
  image_load v3, v[0:1] ...

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: write shader asm annotated with wave info into GPU hang reports

Note that the disassembly is written twice - first the unmodified compiler
output and then the wave-annotated output only if there are waves executing
the shader.

Sample output from a real GPU hang most likely caused by image_sample:

The number of active waves = 28

Pixel Shader - annotated disassembly:
    s_mov_b64 s[6:7], exec                                        ; BE86017E [PC=0x10f3e3800, off=0, size=4]
    s_wqm_b64 exec, exec                                          ; BEFE077E [PC=0x10f3e3804, off=4, size=4]
...
    image_sample v[7:9], v[0:1], s[12:19], s[20:23] dmask:0x7     ; F0800700 00A30700 [PC=0x10f3e3a94, off=660, size=8]
    s_buffer_load_dword s20, s[0:3], 0x50                         ; C0220500 00000050 [PC=0x10f3e3a9c, off=668, size=8]
    s_load_dwordx4 s[24:27], s[4:5], 0x170                        ; C00A0602 00000170 [PC=0x10f3e3aa4, off=676, size=8]
    s_load_dwordx8 s[12:19], s[4:5], 0x140                        ; C00E0302 00000140 [PC=0x10f3e3aac, off=684, size=8]
    s_buffer_load_dword s11, s[0:3], 0x5c                         ; C02202C0 0000005C [PC=0x10f3e3ab4, off=692, size=8]
    s_buffer_load_dword s21, s[0:3], 0x54                         ; C0220540 00000054 [PC=0x10f3e3abc, off=700, size=8]
    s_buffer_load_dword s22, s[0:3], 0x58                         ; C0220580 00000058 [PC=0x10f3e3ac4, off=708, size=8]
    s_waitcnt vmcnt(0)                                            ; BF8C0F70 [PC=0x10f3e3acc, off=716, size=4]
          ^ SE0 SH0 CU1 SIMD1 WAVE0  EXEC=aaaaaaa555aaaaaa  INST32=BF8C0F70
          ^ SE0 SH0 CU1 SIMD2 WAVE0  EXEC=aaaa85555555552a  INST32=BF8C0F70
          ^ SE0 SH0 CU1 SIMD3 WAVE0  EXEC=000000000000000a  INST32=BF8C0F70
          ^ SE0 SH0 CU6 SIMD1 WAVE0  EXEC=25a5a5aa82aaaaaa  INST32=BF8C0F70
          ^ SE0 SH0 CU6 SIMD3 WAVE0  EXEC=50aaaa8fffa55555  INST32=BF8C0F70
          ^ SE0 SH0 CU7 SIMD0 WAVE0  EXEC=5554aaaaaaa1a555  INST32=BF8C0F70
          ^ SE0 SH0 CU7 SIMD0 WAVE1  EXEC=aaaa5555ffffffff  INST32=BF8C0F70
          ^ SE0 SH0 CU7 SIMD1 WAVE0  EXEC=555557aaaaaaaaa5  INST32=BF8C0F70
          ^ SE0 SH0 CU7 SIMD3 WAVE0  EXEC=5555aaaaaaaaaa85  INST32=BF8C0F70
          ^ SE1 SH0 CU3 SIMD1 WAVE0  EXEC=aaaaaaaaaaaaaaaa  INST32=BF8C0F70
          ^ SE1 SH0 CU4 SIMD0 WAVE0  EXEC=aaaaaaaa5a5a5a5a  INST32=BF8C0F70
          ^ SE1 SH0 CU4 SIMD1 WAVE0  EXEC=aaaaaaa5a5a5a4a5  INST32=BF8C0F70
          ^ SE1 SH0 CU4 SIMD2 WAVE0  EXEC=5555555000000000  INST32=BF8C0F70
          ^ SE1 SH0 CU4 SIMD3 WAVE0  EXEC=aa555554155aaaaa  INST32=BF8C0F70
          ^ SE1 SH0 CU5 SIMD0 WAVE0  EXEC=55ffff55555555aa  INST32=BF8C0F70
          ^ SE1 SH0 CU5 SIMD1 WAVE0  EXEC=555555555aaaaaaa  INST32=BF8C0F70
          ^ SE1 SH0 CU5 SIMD2 WAVE0  EXEC=a0aaaaaaa8555555  INST32=BF8C0F70
          ^ SE1 SH0 CU5 SIMD3 WAVE0  EXEC=8aaaaaaaaaaaa555  INST32=BF8C0F70
          ^ SE1 SH0 CU6 SIMD0 WAVE0  EXEC=000000002aaaaaaa  INST32=BF8C0F70
          ^ SE2 SH0 CU1 SIMD0 WAVE0  EXEC=5aaaa5400aaaa15a  INST32=BF8C0F70
          ^ SE2 SH0 CU1 SIMD1 WAVE0  EXEC=00aaaaaaaa5555aa  INST32=BF8C0F70
          ^ SE2 SH0 CU1 SIMD2 WAVE0  EXEC=aa00005555554555  INST32=BF8C0F70
          ^ SE2 SH0 CU1 SIMD3 WAVE0  EXEC=aaaaaaa000000000  INST32=BF8C0F70
          ^ SE3 SH0 CU4 SIMD0 WAVE0  EXEC=5555aaaaaaaaaaaa  INST32=BF8C0F70
          ^ SE3 SH0 CU4 SIMD2 WAVE0  EXEC=ffaaaaaaaaaa5555  INST32=BF8C0F70
          ^ SE3 SH0 CU4 SIMD3 WAVE0  EXEC=aaaa55555555aa00  INST32=BF8C0F70
          ^ SE3 SH0 CU5 SIMD0 WAVE0  EXEC=00aaaaaaaaaaaa5a  INST32=BF8C0F70
          ^ SE3 SH0 CU5 SIMD1 WAVE0  EXEC=5a555555005555ff  INST32=BF8C0F70
    v_mul_f32_e32 v7, s6, v7                                      ; 0A0E0E06 [PC=0x10f3e3ad0, off=720, size=4]
...

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: write wave information into GPU hang reports

UMR is our new debugging tool. It must have +s set for Mesa to use it
without root privileges:
  sudo chmod +s .../umr

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

tgsi-dump: dump label if instruction has one

The instruction has an associated label when Instruction.Label == 1,
as can be seen in ureg_emit_label() or tgsi_build_full_instruction().

This fixes dump generating extra :0 labels on conditionals, and virgl
parsing more than the expected tokens and eventually reaching "Illegal
command buffer" (when parsing more than a safety margin of 10 we
currently have).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

tgsi: remove ureg_label_insn

Unused since commit 2897cb3dba9287011f9c43cd2f214100952370c0.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: handle queue submission with no cs but semaphores

It's legal to submit just semaphores with no command streams,
this patch fixes this case by emitting the empty cs, it also
handles the fence emission for this case better.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

util/disk_cache: error check asprintf()

Fixes: f3d911463e8 "util/disk_cache: stop using ralloc_asprintf() unnecessarily"
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs: add shader cache environment variables

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

nvc0/ir: fix ubo max clamp, reset file index

We just increased the max UBO, so we should also increase the clamp that
we do for robustness. Similarly, as we're including the fileIndex in the
new indirect value, we should reset fileIndex to 0 so that it is not
added in a second time.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org

nv50/ir: always return 0 when trying to read thread id along unit dim

Many many many compute shaders only define a 1- or 2-dimensional block,
but then continue to use system values that take the full 3d into
account (like gl_LocalInvocationIndex, etc). So for the special case
that a dimension is exactly 1, we know that the thread id along that
axis will always be 0, so return it as such and allow constant folding
to fix things up.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0/ir: fix robustness guarantees for constbuf loads on kepler+ compute

Kepler and up unfortunately only support up to 8 constbufs. We work
around this by loading from constbufs as if they were storage buffers.
However we were not consistently applying limits to loads from these
buffers. Make sure to do the same thing we do for storage buffers.

Fixes GL45-CTS.robust_buffer_access_behavior.uniform_buffer

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org

nvc0: increase number of ubo binding points

Apparently GL 4.5 requires 14 of these (there's a "*" in the spec, but
it's unclear what it refers to). We need to expose an extra binding
point for the "program parameters", which means this must be 15. Remove
the last vestige of the "use c14 for immediates" idea.

Fixes GL45-CTS.shading_language_420pack.binding_uniform_block_array

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org

configure: add blurb about what the LIBDRM_*_REQUIRED stuff means

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>

nvc0: expose int64

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: make it possible to have the flags def in def0

There's all kinds of logic that doesn't like there being holes in defs
or srcs lists. Avoid them. This also fixes the sched logic for maxwell.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add support for 64-bit shift lowering on SM20/SM30

Unfortunately there is no SHF.L/SHF.R instruction pre-SM35. So we have
to do a bit more work to get the job done.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add support for all the new int64 tgsi opcodes

A few thoughts:
 - Some of that LegalizeSSA logic should really live much earlier and be
   subject to the likes of DCE and other useful passes
 - Some of the "lowering" done in from_tgsi should be done later so that
   proper optimization might be done.

However this all works and the above can be improved upon later.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: Split 64-bit integer MAD/MUL operations

Hardware does not support 64-bit integers MAD and MUL operations, so we need
to transform them in 32-bit operations.

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>

nvc0/ir: add a "high" subop for shifts, emit shf.l/shf.r for 64-bit

Note that this is not available for SM20/SM30.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: fix SET and SLCT emission

We were never emitting a .X flag for consuming condition code on SET,
and weren't emitting a signed type for SLCT comparison. Discovered while
working on int64 logic.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add support for emitting partial min/max ops for int64

These operations allow you to compute min/max on arbitrary-width
integers, 32 bits at a time.

Note that the low/med ops implicitly set the condition code, and the
med/high ops implicitly consume it.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

gallium: add separate PIPE_CAP_INT64_DIVMOD

Nouveau does not currently have logic to implement this as a library
function. Even though such a library could be written, there's no big
advantage to do it that way for now given that int64 is a very uncommon
use-case. Allow a driver to expose INT64 without supporting division and
modulo operations.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

docs: improve the list of gl implementations

Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

docs: improve the list of implemented APIs

Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

glsl: Allow compatibility shaders with MESA_GL_VERSION_OVERRIDE=...

Previously if you used MESA_GL_VERSION_OVERRIDE=3.3COMPAT, Mesa exposed
an OpenGL 3.3 compatibility profile context (with various unimplemented
features and bugs), but still refused to compile shaders with

   #version 330 compatibility

This patch simply adds a small bit of plumbing to let that through.

Of course the same caveats apply: compatibility profile is still not
supported (and will not be supported), so there are no guarantees that
anything will work.

Tested-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

docs: reword sentence that my brain can't parse

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Elie Tournier <tournier.elie@gmail.com>

docs: https all the links \o/

Most of them already redirected to https anyway, so we might as well
avoid the redirection and the security implications by linking directly
to the right protocol.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: fix gallium wiki link in relnotes

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: update 'thanks' for hosting

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Brian Paul <brianp@vmware.com>

i965/fs: add support for int64 to bool conversion

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir: add opcode to perform int64 to bool conversions

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]2[iu]32

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]642f

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: legalize [u]int64 to 32-bit data conversions in lower_d2x

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99660
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965/fs: Add support for nir_op_[iu]642d

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

i965: Allow int64 conversion operations in channel_expressions

This fixes 143 of the new piglit tests added by Nicolai

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

util/disk_cache: stop using ralloc_asprintf() unnecessarily

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

glsl: add param to force shader recompile

This will be used to skip checking the cache and force a recompile.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

util: add a disk_cache_remove() function

This will be used to remove cache items created with old versions
of Mesa or other invalid cache items from the cache.

V2: rename stub function (cache_* funtions were renamed disk_cache_*)
in master.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

st/mesa/i965: create link status enum

For the on-disk shader cache we want to be able to differentiate
between a program that was linked and one that was loaded from cache.

V2:
 - don't return the new enum directly to the application when queried,
   instead return GL_TRUE or GL_FALSE as required. Fixes google-chrome
   corruptions when using cache.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

docs: update intro.html to mention new APIs, etc

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

docs: the site is now hosted by freedesktop.org

Reviewed-by: Eric Engestrom <eric@engestrom.ch>

radv: Add CPU color packing for VK_FORMAT_A2B10G10R10_UNORM_PACK32.

For allowing fast color clears in the main render targets of dota2.

[airlied: fix clear_vals[1] as suggested by Andres.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: (trivial) include <inttypes.h> for PRIx64 macros

Fixes a compile error with mingw.

swr: [rasterizer jitter] Pass LLVM-IR size into jitter

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

Removed temporary scafolding in PA, widended the PA_STATE interface
for SIMD16, and implemented PA_STATE_CUT and PA_TESS for SIMD16.

PA_STATE_CUT and PA_TESS now work in SIMD16.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Disable unsafe FP optimizations in the jitter

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

Widen simdvertex to SIMD16/simd16vertex in frontend for passing VS
attributes from VS to PA.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Add DEBUGTRAP jit builder function

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Multisample blend jit fix

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Change SimdVector representation to array

Make all SimdVectors in LLVM represented as simdscalar[4] rather
than a struct.

Fixes issues with promotion of values from i32 to i64 to match
register width.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Fix issues with stream-out on llvm>=3.8

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer jitter] Adjust jitter header includes

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr: [rasterizer core] Frontend SIMD16 WIP

SIMD16 Primitive Assembly (PA) only supports TriList and RectList.

CUT_AWARE_PA, TESS, GS, and SO disabled in the SIMD16 front end.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

docs: update package contents

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: fix unpacking instructions

File names were wrong, file formats were wrong, bunzip command was
wrong...

I also removed all but the simplest example; people who use pipes already
know how to untar, so let's simplify and remove potential confusion for
non-tech-savvy users.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: remove dead 'beta' link

Release candidates haven't been in a 'beta' subdir in a long time, so let's
replace the dead link with an explanation instead.

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

docs: add a note about the new version scheme

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

r600/sb: Fix memory leak

Signed-off-by: Marek Olšák <marek.olsak@amd.com>

mesa: use PRId64/PRIu64 when printing 64-bit ints

V2: actually use PRIu64

Reviewed-by: Dave Airlie <airlied@redhat.com>

mesa/st: fix strict aliasing issue in int64 code.

This fixes the int64 code same as the double code.

Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/uniform: fix strict aliasing issues with int64 code.

This fixes these like the double version does.

Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: handle dcc in explicit image resolve path. (v2)

We need to initialize dcc like we do in the subpass path.

v2: fix initial/final layouts
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Enable fast clears by default.

Works for me on dota2 and talos now.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>

spirv: Add more asserts in vtn_vector_construct

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99465

configure.ac: remove src/gallium/winsys/intel/drm/Makefile reference

Not wired up (not referenced in any SUBDIR), leading to `make distcheck'
failure.

Fixes: d77fa310ed8 "ilo: EOL drop unmaintained gallium drv from buildsys"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

docs: reword ilo removal note

Properly annotate <li> and keep the note analogous to all the previous
ones - OpenVG, st/egl, etc.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

configure.ac: Remove redundant libglvnd stanza

There were two "libglvnd configuration" section in the squashed commit
that added libglvnd support, while only one in the original libglvnd
branch. A following commit moves one of them downwards. Now remove the
upper "older" one and move GL_LIB name decision downwards after the new
libglvnd configuration section.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>

travis: use both cores for make/make check

The instance offers 2 cores, so use them to speed things up.

v2: Set MAKEFLAGS instead [Eric]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

travis: add nearly all gallium drivers to the list

Note: we need the explicit --enable-freedreno for libdrm since the
latter is 'smart' and disables it if building on !arm platforms.

The radeonsi and swr are explicitly left out since they require
'too-recent' LLVM - 3.6

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

travis: correct libdrm required regex to also track libdrm itself

The current regex was tracking only the libdrm_foo packages, while with
recent changed we bumped only (and rightfully so) libdrm.

Fix the regex to track any libdrm package.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

configure.ac: add swr to the gallium drivers list.

v2: Rebase on top of ILO removal.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

configure.ac: list all the dri-drivers in the help string

It's unlikely that any of the additions come as a suprise to anyone
i915, nouveau, radeon, r200. Regardless, state clearly what's
available.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: correct compute shader checks for memoryBarrier functions

As per the spec -
"The functions memoryBarrierShared() and groupMemoryBarrier() are
available only in compute shaders; the other functions are available
in all shader types."

Conform to this by adding another delegate to check for compute
shader support instead of only whether the current stage is compute

This allows some fragment shaders in Dirt Rally to compile

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/tgsi: fix oob access in parse instruction

When parsing texture instruction, it doesn't stop if the
'cur' is ',', the loop variable 'i' will also be increased
and be used to index the 'inst.TexOffsets' array. This can lead
an oob access issue. This patch avoid this.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>

Revert "i965: Disable guardband clipping in the smaller-than-viewport case."

This reverts commit 0bac2551e40410e2251daf4fd9faf69310ab34ce.

Now that we position the guardband correctly (applying translations
in addition to scaling) and made it as large (or larger) than the
render target, this shouldn't be necessary.

Now we leave guardband clipping enabled 100% of the time, like the
Windows driver does.

Fixes GL45-CTS.gtf21.GL2FixedTests.clip.clip.  It tries to draw a
16384x64 rectangle, and it appears that some kind of numerical
imprecisions in the clipper result in some edge pixels going missing.
The Windows driver passes this test because of guardband clipping.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Always scissor on Gen6-7.5 instead of disabling guardband.

Previously we disabled the guardband when the viewport was smaller than
the framebuffer on Gen6-7.5, to prevent portions of primitives from
being draw outside of the viewport.  On Gen8+, we relied on the viewport
extents test to effectively scissor this away for us.

We can simply always enable scissoring instead.  We already include the
viewport in the scissor rectangle, so this will effectively do the
viewport extents test for us.  (The only difference is that the scissor
rectangle doesn't support sub-pixel values.  I think that's okay.)

Given that the viewport extents test is essentially a second scissor,
and is enabled for basically all 3D drawing on Gen8+, it stands to
reason that scissoring is cheap.  Enabling the guardband reduces the
cost of clipping, which is expensive.

The Windows driver appears to never disable guardband clipping, and
appears to use scissoring in this case.  I don't know if they leave
it on universally though.

This fixes misrendering in Blender, where the "floor plane" grid lines
started rendering at wrong angles after I disabled XY clipping of line
primitives.  Enabling the guardband seems to solve the issue.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99339
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Use a better guardband calculation.

(Patch co-authored by Jason and Ken.)

We scaled the guardband based on the viewport size, but failed to
take into account the translation portion of the viewport transform.

This meant the guardband was always centered around the origin.
We want it to be centered around the screen-space drawing area,
which is the intersection of the viewport and the render target.

At best, getting this wrong would reduce the guardband's effectiveness
in some cases.  At worst, it might break things - objects outside of the
guardband are trivially rejected, so getting the guardband in the wrong
place and leaving guardband clipping enabled could cause problems.

v2: drop clamping of positive maximums.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Combine the Gen6 SF and Clip viewport atoms.

The next patch will make the guardband calculation dependent on the
transformation matrix.  Instead of computing it in both atoms, just
combine them into a single atom.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

radv: pass FMASK alignment to application

As was done for dcc and cmask.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: Pass DCC alignment to application.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>

radv: Pass CMASK alignment to application.

CMASK alignment can be greater than image data alignment, so pass
it to the app so that it knows what alignment to backing memory
should have.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/ac: avoid the fmask path when doing txs.

This fixes the vulkan samples deferredmultisampling test.

Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

swr: [rasterizer core] Removed unused clip code.

Removed unused Clip() and FRUSTUM_CLIP_MASK define.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>