Jonathan Marek [Sat, 6 Jun 2020 15:16:16 +0000 (11:16 -0400)]
freedreno/a6xx: use nonbinning VS when GS is used
The current "ds = state->bs" seems broken, and the "vs = state->bs" is
unnecessary (already set above). Since it was added as part of a GS-related
patch, I think this is what was intended.
Note: tesselation disables GMEM rendering so we shouldn't have to worry
about hs/ds + binning interaction.
Fixes: 0eebedb6190fdab8956769 ("freedreno/a6xx: Emit program state for GS")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5370>
Jonathan Marek [Sun, 7 Jun 2020 02:08:41 +0000 (22:08 -0400)]
turnip: clamp sampler minLod/maxLod
Otherwise A6XX_TEX_SAMP_1_{MIN,MAX}_LOD silently overflows.
This fixes these tests:
dEQP-VK.texture.explicit_lod.2d.derivatives.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5375>
Jonathan Marek [Sun, 7 Jun 2020 02:07:09 +0000 (22:07 -0400)]
turnip: update some properties based on blob driver
subTexelPrecisionBits/mipmapPrecisionBits change fixes some failures in:
dEQP-VK.texture.explicit_lod.*
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5375>
Jonathan Marek [Sun, 7 Jun 2020 17:06:42 +0000 (13:06 -0400)]
turnip: move HLSQ_UPDATE_CNTL write to before xs config writes
This matches the blob and gallium driver more closely, and fixes a
rendering issue observed on a650.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5376>
Caio Marcelo de Oliveira Filho [Sat, 6 Jun 2020 06:05:42 +0000 (23:05 -0700)]
nir: Fix logic that ends combine barrier sequence
The combination must stop when we see a scoped barrier that have
execution scope, i.e. it has control barrier behavior. The code was
mistakenly looking at the wrong scope.
Fixes: 345b5847b42 ("nir: Replace the scoped_memory barrier by a scoped_barrier")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Caio Marcelo de Oliveira Filho [Fri, 5 Jun 2020 23:04:13 +0000 (16:04 -0700)]
intel/fs: Add Fall-through comment
Just to clarify the missing break is intentional.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Caio Marcelo de Oliveira Filho [Fri, 5 Jun 2020 22:58:32 +0000 (15:58 -0700)]
spirv: Memory semantics is optional for OpControlBarrier
Fixes: 3ed2123d77d ("spirv: Use scoped barriers for SpvOpControlBarrier")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Caio Marcelo de Oliveira Filho [Fri, 5 Jun 2020 22:26:47 +0000 (15:26 -0700)]
nir: Fix printing execution scope of a scoped barrier
Fixes: 345b5847b42 ("nir: Replace the scoped_memory barrier by a scoped_barrier")
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
Christian Gmeiner [Sat, 6 Jun 2020 10:28:13 +0000 (12:28 +0200)]
etnaviv: drop translate_blend(..)
PIPE_BLEND_* matches 1:1 the hardware defines.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4187>
Danylo Piliaiev [Fri, 29 May 2020 10:51:32 +0000 (13:51 +0300)]
glsl: inline functions with unsupported return type before converting to nir
glsl_to_nir doesn't expect non-vector/scalar return types in functions.
Fixes: 7e60d5a501f311fa5e7bca5335adc6013dc1aeb9
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3058
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3060
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Tested-by: Witold Baryluk <witold.baryluk@gmail.com>
Reviewed-by: Witold Baryluk <witold.baryluk@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5333>
Rhys Perry [Thu, 4 Jun 2020 13:36:00 +0000 (14:36 +0100)]
aco: use v_xor3_b32
fossil-db (Navi):
Totals from 334 (0.26% of 128321) affected shaders:
CodeSize:
3345532 ->
3345484 (-0.00%); split: -0.00%, +0.00%
Instrs: 624662 -> 622778 (-0.30%); split: -0.30%, +0.00%
Mostly affects some parallel-rdp shaders
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5357>
Rhys Perry [Thu, 4 Jun 2020 14:03:11 +0000 (15:03 +0100)]
ac/gpu_info, radv: set max_wave64_per_simd to 20 on GFX10
Fixes RADV max_waves reporting for GFX10
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5356>
Samuel Pitoiset [Wed, 3 Jun 2020 12:35:02 +0000 (14:35 +0200)]
nir/lower_explicit_io: fix NON_UNIFORM access for UBO loads
Make sure to propagate the NON_UNIFORM access for UBO loads, so
that non-uniform loads are correctly lowered.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5311>
Arcady Goldmints-Orlov [Wed, 15 Apr 2020 21:55:53 +0000 (16:55 -0500)]
nir/spirv/glsl450: increase asin(x) precision
asin(x) is now implemented using a piecewise approximation, which
improves the precision for |x| < 0.5
Previously, we were using a polynomial approximation for both the
asin() and acos() functions. Unfortunately, for asin(), this polynomial
does not have enough precision to satisfy the Vulkan CTS requiremenents,
which define the asin() precision based on the precision of
atan2(x, sqrt(1.0 - x*x)). The piecewise approximation gives the needed
precision in the problematic range.
v2: Skip the piecewise approximation for acos
Closes: #1843
Acked-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3809>
Samuel Pitoiset [Thu, 4 Jun 2020 07:28:16 +0000 (09:28 +0200)]
ac/nir: adjust an assertion for D16 on GFX6-GFX7
16-bit types can be used with MUBUF on GFX6-GFX7.
Fixes: c3e0ba52a0a ("ac/nir: support 16-bit data in buffer_load_format opcodes")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5325>
Peter Seiderer [Sun, 22 Mar 2020 12:03:00 +0000 (13:03 +0100)]
v3d_bufmgr: fix time_t printf
Fixes:
error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘time_t’ {aka ‘long long int’}
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4279>
Peter Seiderer [Sun, 22 Mar 2020 10:48:31 +0000 (11:48 +0100)]
pan_bo.h: add time.h include for time_t
Fixes:
../src/gallium/drivers/panfrost/pan_bo.h:93:9: error: unknown type name ‘time_t’
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4279>
Peter Seiderer [Sun, 22 Mar 2020 10:42:35 +0000 (11:42 +0100)]
vc4_bufmgr: fix time_t printf
Fixes:
error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘time_t’ {aka ‘long long int’}
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4279>
Timothy Arceri [Fri, 5 Jun 2020 03:57:40 +0000 (13:57 +1000)]
glsl: fix potential slow compile times for GLSLOptimizeConservatively
See code comment for full description of the change.
Fixes: 0a5018c1a483 ("mesa: add gl_constants::GLSLOptimizeConservatively")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3034
Tested-by: Witold Baryluk <witold.baryluk@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5346>
Charmaine Lee [Fri, 5 Jun 2020 00:46:33 +0000 (17:46 -0700)]
llvmpipe: do not enable tessellation shader without llvm coroutines support
Tessellation shader in llvmpipe depends on llvm coroutines support. So do not
advertise tessellation shader support in llvmpipe if GALLIVM_HAVE_CORO is FALSE.
This fixes assertion in LLVMTokenTypeInContext() running tessellation shader
tests with llvm version < 6.
Fixes: eb522717 "llvmpipe: add support for tessellation shaders"
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5366>
Marcin Ślusarz [Fri, 5 Jun 2020 09:52:42 +0000 (11:52 +0200)]
intel/compiler: fix Android build
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Fixes: 689acc739899 ("intel/compiler: Extract control barriers from scoped barriers")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3087
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5354>
Vinson Lee [Fri, 5 Jun 2020 07:36:55 +0000 (00:36 -0700)]
intel/genxml: Migrate from deprecated xml.etree.ElementTree getchildren.
xml.etree.ElementTree getchildren was deprecated since Python 2.7 and
will be removed in Python 3.9.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5348>
Mauro Rossi [Fri, 5 Jun 2020 20:33:48 +0000 (22:33 +0200)]
android: svga: fix build for GL4.1 support
Fixes the following building errors:
external/mesa/src/gallium/drivers/svga/svga_context.c:184: error: undefined reference to 'svga_init_ts_functions'
external/mesa/src/gallium/drivers/svga/svga_context.c:100: error: undefined reference to 'svga_cleanup_tcs_state'
out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_pipe_svga_intermediates/libmesa_pipe_svga.a(svga_state.o):svga_state.c:hw_draw_state_sm5: error: undefined reference to 'svga_hw_tes'
out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_pipe_svga_intermediates/libmesa_pipe_svga.a(svga_state.o):svga_state.c:hw_draw_state_sm5: error: undefined reference to 'svga_hw_tcs'
Fixes: ccb4ea5a "svga: Add GL4.1(compatibility profile) support in svga driver"
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5364>
Mauro Rossi [Fri, 5 Jun 2020 20:37:38 +0000 (22:37 +0200)]
android: util: fix build for GL4.1 support
Fixes the following building errors:
external/mesa/src/gallium/drivers/svga/svga_state_tgsi_transform.c:154: error: undefined reference to 'tgsi_write_vpos'
external/mesa/src/gallium/drivers/svga/svga_state_tgsi_transform.c:201: error: undefined reference to 'tgsi_remove_dynamic_indexing'
Fixes: 48a7456f ("util: Add util functionality for GL4.1 support")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5364>
Vinson Lee [Fri, 5 Jun 2020 07:46:10 +0000 (00:46 -0700)]
Switch from cElementTree to ElementTree.
The xml.etree.cElementTree module will be removed in Python 3.9. Since
Python 3.3 the xml.etree.cElementTree module has been deprecated, the
xml.etree.ElementTree module uses a fast implementation whenever
available.
Builds using Python 2.7 can still work but with the slower
implementation.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5349>
Icecream95 [Fri, 5 Jun 2020 04:52:23 +0000 (16:52 +1200)]
Revert "panfrost: Keep cached BOs mmap'd"
This reverts commit
794c239a990e08b5a42d42607e9c5e5b0921390c.
A kernel bug causes cached BOs to not be unmapped correctly,
triggering "bad page cache" kernel messages and causing short hangs.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5355>
Icecream95 [Fri, 5 Jun 2020 08:17:27 +0000 (20:17 +1200)]
pan/midgard: Use a signed value for checking inline constants
Inline constants are sign extended, so we should use a int16_t instead
of an unsigned type.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5351>
Eric Anholt [Fri, 29 May 2020 23:49:43 +0000 (16:49 -0700)]
freedreno/ir3: Handle cases where we decide not to lower UBO 0 loads.
We advertize 4096 vec4s of GL uniform storage, but the HW can only store
512 vec4s in the const buffer.
Closes: #3049
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Fri, 29 May 2020 23:35:43 +0000 (16:35 -0700)]
freedreno/ir3: Drop the max_const on a6xx to 512.
The GLES blob on the p3a limits constlen to 512 between VS and FS across
a6xx gpu ids (615, 630, 640, and 650). Experimentally, exceeding that
limit in any one stage results in rendering corruption or GPU hangs
(though my most detailed testing had a loop limit in a uniform, so that
may the cause of the hang). Clamp the limit we use inside of a shader so
we don't exceed it within a stage.
This commit doesn't resovle limiting inter-stage. Experimentally, I've
found that I can push up to a total of ~768 vec4s between VS and FS on
a630, with or without uniform updates between each draw. We'll need to do
some shader key-based limiting of constlen at draw time to respect that
limit, but that's left for future work, and this commit is enough for the
google earth case that initiated this work.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Fri, 29 May 2020 23:31:43 +0000 (16:31 -0700)]
freedreno/ir3: Account for driver params in UBO max const upload.
The const state setup needs to be able to push its driver params, so
account for them in the analyze_ubo_ranges.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Fri, 29 May 2020 17:21:02 +0000 (10:21 -0700)]
freedreno/ir3: Stop shifting UBO 1 down to be UBO 0.
It turns out the GL uniforms file is larger than the hardware constant
file, so we need to limit how many UBOs we lower to constbuf loads. To do
actual UBO loads, we'll need to be able to upload UBO 0's pointer or
descriptor.
No difference on nohw 1 UBO update drawoverhead case (n=35).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Mon, 1 Jun 2020 18:40:36 +0000 (11:40 -0700)]
freedreno/ir3: Drop unnecessary alignment of pushed UBO size.
The analysis pass gives us vec4-aligned size, and all of our other
constbuf allocations here are in vec4 units, so we can just divide by 16.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Mon, 1 Jun 2020 18:32:04 +0000 (11:32 -0700)]
freedreno/ir3: Stop pushing immediates once we've filled the constbuf.
If we filled the constbuf up with UBOs, we may need to avoid generating
more immediate push constants.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Mon, 1 Jun 2020 18:20:51 +0000 (11:20 -0700)]
freedreno/ir3: Refactor ir3_cp's lower_immed().
There was duplicated handling in the callers that we can just move inside.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Mon, 1 Jun 2020 18:53:22 +0000 (11:53 -0700)]
freedreno: Upload gallium constbufs as needed when referenced as a UBO.
For now we never ask to set up UBO 0 as a real UBO, so this doesn't
trigger, but it gets us ready for handling the case where UBO 0 is too big
to be push constants in the HW.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5273>
Eric Anholt [Fri, 5 Jun 2020 00:08:18 +0000 (17:08 -0700)]
freedreno/a6xx: Add support for ALPHA_TO_ONE.
Fixes piglit ext_framebuffer_multisample-draw-buffers-alpha-to-one
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5343>
Eric Anholt [Fri, 5 Jun 2020 00:00:59 +0000 (17:00 -0700)]
turnip: Add support for alphaToOne.
Comparing a blob trace using the feature to one not, the difference was
pretty obvious and in the spot you'd expect compared to alphaToCoverage.
The SP_ reg didn't have a corresponding bit set, though it also has an
alphaToCoverage.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5343>
Eric Anholt [Thu, 4 Jun 2020 23:51:13 +0000 (16:51 -0700)]
turnip: Use tu_cs_emit_regs() for BLEND_CONTROL.
Just a cleanup since I was in the area.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5343>
Rhys Perry [Fri, 5 Jun 2020 13:28:28 +0000 (14:28 +0100)]
radv: set keep_statistic_info with RADV_DEBUG=shaderstats
Needed for RADV_DEBUG=shaderstats to dump ACO statistics.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5358>
Eric Engestrom [Fri, 5 Jun 2020 09:26:56 +0000 (11:26 +0200)]
intel: fix gen_sort_tags.py
The script was failing for me (python 3.8), not sure if this is a recent
python version break or not as I don't know how often people have been
running this script:
Processing ./gen9.xml... Traceback (most recent call last):
File "./gen_sort_tags.py", line 177, in <module>
main()
File "./gen_sort_tags.py", line 170, in main
genxml[:] = enums + sorted_structs.values() + instructions + registers
TypeError: can only concatenate list (not "odict_values") to list
Turning the odict into a list fixes it for me, and the resulting xml
file are identical to before :)
Fixes: 903e142f0d35bc550ffd ("genxml: add a sorting script")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5352>
Samuel Pitoiset [Thu, 4 Jun 2020 08:41:50 +0000 (10:41 +0200)]
radv/aco: enable VK_KHR_shader_subgroup_extended_types on GFX6-GFX7
CTS pass on Pitcairn (GFX6). This extension isn't really useful
without 8-bit/16-bit storage though but this is going to be exposed
soon.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5327>
Samuel Pitoiset [Thu, 4 Jun 2020 08:39:51 +0000 (10:39 +0200)]
aco: fix nir_intrinsic_quad_* with 8-bit in GFX6-GFX7
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5327>
Samuel Pitoiset [Thu, 4 Jun 2020 08:35:23 +0000 (10:35 +0200)]
aco: fix sign-extend 8-bit subgroup operations on GFX6-GFX7
SDWA is GFX8+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5327>
Samuel Pitoiset [Fri, 5 Jun 2020 06:54:52 +0000 (08:54 +0200)]
aco: use v_bfe_u32 for unsigned reductions sign-extension on GFX6-GFX7
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5327>
Eric Engestrom [Fri, 5 Jun 2020 09:49:06 +0000 (11:49 +0200)]
intel/genxml: drop sort_xml.sh and move the loop directly in gen_sort_tags.py
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5353>
Bas Nieuwenhuizen [Sun, 24 May 2020 13:04:04 +0000 (15:04 +0200)]
radv: Use ac_surface to allocate aux surfaces.
For consistency and a bunch of codesharing.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 12:23:24 +0000 (14:23 +0200)]
amd/common: Add total alignment calculation.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 12:14:34 +0000 (14:14 +0200)]
radv: Allocate values/predicates at the end of the image.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 12:00:05 +0000 (14:00 +0200)]
radv: Disable HTILE in ac_surface.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 11:57:02 +0000 (13:57 +0200)]
radv: Disable DCC in ac_surface.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 11:47:20 +0000 (13:47 +0200)]
radv: Use offsets in surface struct.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 11:25:53 +0000 (13:25 +0200)]
radv: Rely on ac_surface for avoiding cmask for linear images.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 10:50:55 +0000 (12:50 +0200)]
radv: Enforce the contiguous memory for DCC layers in ac_surface.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 10:10:00 +0000 (12:10 +0200)]
radv: Pass no_metadata_planes info in to ac_surface.
Also do not allocate aux surfaces for multi-plane images. I may
have messed up and used plane 1 offsets for the other planes as well.
I cannot imagine that sharing aux surfaces between the planes will
work well.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Bas Nieuwenhuizen [Sun, 24 May 2020 09:57:09 +0000 (11:57 +0200)]
radv: Use ac_surface to determine fmask enable.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5194>
Christian Gmeiner [Thu, 4 Jun 2020 10:56:00 +0000 (12:56 +0200)]
ci: add U-Boot specific fetch strings
U-Boot's fastboot over udp generates the following output:
Listening for fastboot command on x.y.z.w
Also add a general 'data abort' error string seen with an
too old U-Boot version:
https://github.com/u-boot/u-boot/commit/
95712af
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5258>
Christian Gmeiner [Thu, 21 May 2020 22:05:37 +0000 (00:05 +0200)]
ci: extend expect-output.sh
We need to support different fastboot fetch strings for different
bootloader solutions. Lets extend expect-output.sh to support
multiple fetch strings (-f) and add support for error catch
strings (-e) to stop the CI run early.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5258>
Rob Clark [Thu, 4 Jun 2020 21:15:58 +0000 (14:15 -0700)]
freedreno/computerator: fix missing dependency on generated header
Fixes:
```
../mesa-freedreno-20.2.0_pre/src/freedreno/computerator/ir3_asm.c:25:10: fatal error: 'ir3/ir3_parser.h' file not found
#include "ir3/ir3_parser.h"
^~~~~~~~~~~~~~~~~~
1 error generated.
```
Fixes: da467817e3e ("freedreno/ir3: Move ir3 assembler to backend compiler")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5340>
Eric Engestrom [Thu, 4 Jun 2020 23:05:46 +0000 (01:05 +0200)]
glapi: remove deprecated .getchildren() that has been replace with an iterator
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3086
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Vinson Lee <vlee@freedesktop.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5342>
Samuel Pitoiset [Thu, 4 Jun 2020 12:53:20 +0000 (14:53 +0200)]
radv/aco: enable 64-bit atomic features if RADV is linked with LLVM 8
Just in case someone links RADV with this old LLVM 8 and wants ACO.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5331>
Neha Bhende [Tue, 26 May 2020 15:59:50 +0000 (21:29 +0530)]
svga: Performance fixes
This is a squash commit of in house performance fixes and misc bug fixes
for GL4.1 support.
Performance fixes:
* started using system memory for constant buffer to gain 3X performance boost with metro redux
Misc bug fixes:
* fixed usage of vertexid in shader
* added empty control point phase in hull shader for zero ouput control point
* misc shader signature fixes
* fixed clip_distance input declaration
* clearing the dirty bit for the surface while using direct map if surface is already flushed
and there is no pending primitive
This patch also uses SVGA_RETRY macro for commands retries. Part of it is already
used in previous patch.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5317>
Neha Bhende [Tue, 26 May 2020 15:56:42 +0000 (21:26 +0530)]
svga: Add GL4.1(compatibility profile) support in svga driver
This patch is a squash commit of a very long in-house patch series.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5317>
Neha Bhende [Tue, 26 May 2020 15:47:44 +0000 (21:17 +0530)]
svga/include: Headers for GL4.1 support
This brings in the new types, enums and #defines for GL 4.1
features in the virtual device.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5317>
Neha Bhende [Tue, 26 May 2020 15:45:23 +0000 (21:15 +0530)]
winsys/drm: Add GL4.1 support in drm winsys
This is to check whether virtual hardware has SM5 support
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5317>
Neha Bhende [Tue, 26 May 2020 15:43:14 +0000 (21:13 +0530)]
util: Add util functionality for GL4.1 support
This patch adds the following tgsi utilities
* tgsi_dynamic_indexing: This utility flattens out the dyanamic indexing of constant buffers
* tgsi_vpos: This utility writes zeros to position at index 0 in vertex shader.
This utility can be used if there is no shader output in vertex shader
* util_make_tess_ctrl_passthrough_shader: This adds passthough tessellation control shader.
Input of passthrough tess ctrl shader is output of vertex shader
and output is input of tessellation eval shader.
If program has tessellation eval shader but no tessellation control shader,
this utility can be used to create passthrough tessellation control shader.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5317>
Rob Clark [Thu, 4 Jun 2020 17:07:57 +0000 (10:07 -0700)]
freedreno/a6xx: more early-z
Technically we only have to do late-z in the alpha-test or discard case
if depth-write is enabled. If depth write is disabled, the depth read /
test / conditional-write interlock that we need to emulate is not a
problem, so we can still use early-z test.
There is a slightly weird case when there is no zsbuf attachment (see
dEQP-GLES31.functional.fbo.no_attachments.*) where the hw wants us to
use LATE_Z.. not entirely sure if this is an interaction with occlusion
query or just a pecularity of how the hw works when there is no depth
buffer.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5336>
Dave Airlie [Thu, 4 Jun 2020 04:03:47 +0000 (14:03 +1000)]
ci: bump virglrenderer to latest version
Need this for upcoming GL 4.0 llvmpipe support.
Reviewed-by: Elie Tournier <elie.tournier@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5323>
Eric Anholt [Thu, 4 Jun 2020 00:07:06 +0000 (17:07 -0700)]
turnip: Simplify vertex buffer bindings.
We were remapping the bindings so the HW binding points were consecutive,
which there's no need for. Now that we don't shuffle, we can mostly drop
the dependency on the pipeline for this SDS.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5321>
Eric Anholt [Thu, 4 Jun 2020 17:11:44 +0000 (10:11 -0700)]
turnip: Don't bother clamping VB size.
From the VK spec: "All elements of pOffsets must be less than the size of
the corresponding element in pBuffers"
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5321>
Eric Anholt [Thu, 4 Jun 2020 17:10:01 +0000 (10:10 -0700)]
turnip: Move vertex buffer bindings to SET_DRAW_STATE.
This means that the HW can skip over the vertex buffer state when it's not
used in a bin. The blob also has this behavior.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5321>
Dave Airlie [Thu, 4 Jun 2020 02:10:40 +0000 (12:10 +1000)]
llvmpipe: move coroutines out of noopt case
the virgl CI code was using the noopt path and crashing with a
wierd can't select llvm.coro.subfn.addr error, turns out we have
to call the cleanup pass no matter what.
This enable a lot more virgl gles31 passes, but we have
to disable tessellation shaders as now they executed, they
crash due to missing OES_gpu_shader5, I should try and reenable
them when llvmpipe is further along
Fixes: d32690b43c91d ("gallivm: add coroutine pass manager support")
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Elie Tournier <elie.tournier@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5320>
Alyssa Rosenzweig [Thu, 4 Jun 2020 15:32:59 +0000 (11:32 -0400)]
pan/mdg: Ensure ld_vary_16 is aligned
Otherwise packing may fail.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 5f8dd413bcc ("pan/mdg: Handle 16-bit ld_vary")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5339>
Kristian H. Kristensen [Thu, 4 Jun 2020 06:18:52 +0000 (23:18 -0700)]
freedreno/a6xx: Fix VFD_CONTROL emit
The FETCH_CNT field isn't actually the FETCH count. We don't have a
lot of data where it's different from DECODE_CNT, so there's not much
to go by. It could be number of VFD_DEST_CNTL or maybe DECODE_CNT for
binning. For now, setting both to number of DEST_CNTL gets Google
Earth working again.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5324>
Clément Guérin [Wed, 3 Jun 2020 05:14:44 +0000 (22:14 -0700)]
radv: Always expose non-visible local memory type on dedicated GPUs
DOOM Eternal expects this type, but RADV doesn't expose it when the VRAM
is entirely host-visible, in my case on Fiji. Matches AMDVLK behavior.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/3054
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5308>
Alyssa Rosenzweig [Tue, 2 Jun 2020 16:15:18 +0000 (12:15 -0400)]
pan/mdg: Legalize inverts with constants
We need to force src_invert to be in the right place even if we flip
when lowering an embedded->inline constant.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 449e5ded934 ("pan/mdg: Treat inot as a modifier")
Reported-by: Icecream95 <ixn@keemail.me>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5299>
Erik Faye-Lund [Tue, 2 Jun 2020 08:44:13 +0000 (10:44 +0200)]
nir: reuse existing psiz-variable
For shaders where there's already a psiz-variable, we should rather
reuse it than create a second one. This can happen if a shader writes
gl_PointSize, but disables GL_PROGRAM_POINT_SIZE.
Fixes: 878c94288a8 ("nir: add lowering-pass for point-size mov")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5328>
Lionel Landwerlin [Sat, 2 May 2020 13:59:19 +0000 (16:59 +0300)]
i965: fix export of GEM handles
We reuse DRM file descriptors internally. Therefore when we export a
GEM handle we must do so in the file descriptor used externally.
v2: Fix dmabuf leak
Fix GEM handle leaks by tracking exported handles
v3: Check os_same_file_description error (Michel)
Don't create multiple exports for a given GEM table
v4: Add WARN_ONCE (Ken)
v5: Remove blank line (Ian)
Remove unused field (Ian)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2882
Fixes: 4094558e8643 ("i965: share buffer managers across screens")
Tested-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4861>
Lionel Landwerlin [Sat, 2 May 2020 13:46:47 +0000 (16:46 +0300)]
iris: fix export of GEM handles
We reuse DRM file descriptors internally. Therefore when we export a
GEM handle we must do so in the file descriptor used externally.
This change also fixes a file descriptor leak of the FD given at
screen creation.
v2: Don't bother checking fd equals, they're always different
Fix dmabuf leak
Fix GEM handle leaks by tracking exported handles
v3: Check os_same_file_description error (Michel)
Don't create multiple exports for a given GEM table
v4: Add WARN_ONCE (Ken)
Rename external_fd to winsys_fd
v5: Remove export lock in favor of bufmgr's
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2882
Fixes: 7557f1605968 ("iris: share buffer managers accross screens")
Tested-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4861>
Lionel Landwerlin [Tue, 2 Jun 2020 08:52:35 +0000 (11:52 +0300)]
i965: don't forget to set screen on duped image
We'll start using this field more for querying image properties.
Without it we run into a crash.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4861>
Lionel Landwerlin [Sat, 2 May 2020 19:43:22 +0000 (22:43 +0300)]
iris: fix BO destruction in error path
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4861>
Vinson Lee [Sat, 23 May 2020 20:46:28 +0000 (13:46 -0700)]
mesa: Fix NetBSD compiler macro.
Reported-by: Rafał Mikrut <mikrutrafal54@gmail.com>
Fixes: a63b90712aad ("mesa: also check for __NetBSD__")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3015
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5191>
Rob Clark [Wed, 3 Jun 2020 22:01:11 +0000 (15:01 -0700)]
freedreno/a6xx: also consider alpha-test for ztest-mode
Looks like we don't have CI coverage for this (since deqp==GLES) but
alpha test is conceptually the same as frag shaders with discard, and
should be handled as such.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Rob Clark [Wed, 3 Jun 2020 17:08:55 +0000 (10:08 -0700)]
freedreno/a6xx: add early-lrz-late-z mode
Now that we are doing a better job of managing LRZ, add support for the
EARLY_LRZ_LATE_Z mode. Since we properly disable LRZ write in cases
where we don't know a fragment's z value during the binning pass (or
when blend is enabled in a later draw, meaning we will need the earlier
fragment's color), we can enable a mode that keeps the early-lrz test
when the frag shader has kill/discard. This will only discard geometry
that is definitely not visible.
This is a pretty big win for games/benchmarks that have a lot of frag
shaders with kill/discard. More than 10% gain for gfxbench trex/mh and
40% gain for mh31.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Rob Clark [Wed, 3 Jun 2020 17:06:58 +0000 (10:06 -0700)]
freedreno/a6xx: re-work LRZ state tracking
In particular, properly detect reversal of depth-test direction.
With that we can remove a lot of cases where we were unnecessarily
invalidating LRZ, which was simply papering over the direction-
reversal issue in deqp.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Rob Clark [Sun, 31 May 2020 17:46:54 +0000 (10:46 -0700)]
freedreno/a6xx: update depth-plane control regs
And document the early-lrz-late-z mode.
Initially I thought this would be two bits to control early-lrz vs
early-z. But having early-z without early-lrz does not make sense,
and the way the values line up makes an enum fit better.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Rob Clark [Sat, 30 May 2020 21:24:36 +0000 (14:24 -0700)]
freedreno/a6xx: sync registers from envytools
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Rob Clark [Tue, 2 Jun 2020 00:29:00 +0000 (17:29 -0700)]
freedreno/ir3: split kill from no_earlyz
Unlike other conditions which prevent early-discard of fragments, kill
does not prevent early LRZ test. Split `has_kill` from `no_earlyz` so
we can take advantage of this.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5298>
Kristian H. Kristensen [Wed, 3 Jun 2020 19:50:15 +0000 (12:50 -0700)]
docs/features.txt: Update for freedreno
We've had GL_OES_texture_cube_map_array for a while for a4xx+ and
support for geometry and tessellation for a6xx+.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5319>
Kristian H. Kristensen [Wed, 3 Jun 2020 19:28:05 +0000 (12:28 -0700)]
freedreno/a6xx: Turn on robustness extensions
With UBO access going through LDC, all memory access uses buffer based
io primitives. We can then advertise
PIPE_CAP_ROBUST_BUFFER_ACCESS_BEHAVIOR and
PIPE_CAP_DEVICE_RESET_STATUS_QUERY, which turn on GL_EXT_robustness,
GL_KHR_robust_buffer_access_behavior and GL_KHR_robustness.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5319>
Vinson Lee [Sat, 23 May 2020 00:59:27 +0000 (17:59 -0700)]
vdpau: Fix wrong calloc sizeof argument.
Fix warning reported by Coverity Scan.
Wrong sizeof argument (SIZEOF_MISMATCH)
suspicious_sizeof: Passing argument 3544UL (sizeof
(vlVdpPresentationQueue)) to function calloc that returns a pointer of
type vlVdpPresentationQueueTarget * is suspicious because a multiple of
sizeof (vlVdpPresentationQueueTarget) /*16*/ is expected.
Fixes: 65fe0866aec7 ("vl: implemented a few functions and made stubs to get mplayer running")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3026
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5182>
Francisco Jerez [Wed, 6 May 2020 22:40:30 +0000 (15:40 -0700)]
OPTIONAL: iris: Perform BLORP buffer barriers outside of iris_blorp_exec() hook.
The iris_blorp_exec() hook needs to be executed under a single
indivisible sync region, which means that in cases where we need to
emit a PIPE_CONTROL for a buffer barrier we won't be able to track the
subsequent commands separately from the previous commands, which will
prevent us from optimizing out subsequent PIPE_CONTROLs if we
encounter the same buffers again. In particular I've encountered this
situation in some SynMark test-cases which perform lots of BLORP
operations with the same buffer bound as both source and destination
(in order to generate mipmaps): In such a scenario if the source
requires flushing we'd also end up flushing for the destination
redundantly, even though a single PIPE_CONTROL would have been
sufficient.
This avoids a 4.5% FPS regression in SynMark OglHdrBloom and a 3.5%
FPS regression in SynMark OglMultithread.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Thu, 6 Feb 2020 04:29:09 +0000 (20:29 -0800)]
iris: Remove iris_flush_depth_and_render_caches().
This helper is unused now.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Fri, 1 May 2020 00:40:52 +0000 (17:40 -0700)]
iris: Emit single render target flush PIPE_CONTROL on format mismatch.
The big-hammer iris_flush_depth_and_render_caches() is largely
redundant whenever a format mismatch is detected from
iris_cache_flush_for_render(). There is no need to kick the depth,
sampler nor constant caches in that case.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Thu, 6 Feb 2020 04:36:35 +0000 (20:36 -0800)]
iris: Open-code iris_cache_flush_for_read() and iris_cache_flush_for_depth().
These have become one-liners now so they can be easily inlined.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Wed, 19 Feb 2020 06:39:43 +0000 (22:39 -0800)]
iris: Remove render cache hash table-based synchronization.
The render cache hash table is now *mostly* redundant with the more
general seqno matrix-based cache tracking mechanism. Most hash table
operations are now gone except for the format mismatch checks done in
iris_cache_flush_for_render(). Redundant code removed as a separate
patch for bisectability.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Wed, 19 Feb 2020 04:53:26 +0000 (20:53 -0800)]
iris: Remove depth cache set tracking and synchronization.
The depth cache set is now redundant with the more general seqno
matrix-based cache tracking mechanism. Removed as a separate patch
for bisectability.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Thu, 6 Feb 2020 02:27:46 +0000 (18:27 -0800)]
iris: Perform compute predraw flushes from compute batch.
Whenever iris_predraw_resolve_inputs() ends up doing a flush or
invalidate, we really want it to be on the same batch which is going
to consume the result. Any resolves should still be performed from
the render batch thanks to the previous patch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Fri, 24 Apr 2020 01:00:15 +0000 (18:00 -0700)]
iris: Remove batch argument of iris_resource_prepare_access() and friends.
The resolves performed by this function are only expected to work from
the render batch, so make sure we use it independently of the batch
the caller wants to use. This function provides no synchronization
guarantees anyway, the caller is expected to insert any cache flushing
and synchronization required for the resolved surface to be visible to
the target batch.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Thu, 6 Feb 2020 02:58:23 +0000 (18:58 -0800)]
iris: Insert buffer barrier in existing cache flush helpers.
As a first step to phasing out the current hashtable-based depth and
render cache tracking mechanisms.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
Francisco Jerez [Thu, 6 Feb 2020 02:59:46 +0000 (18:59 -0800)]
iris: Implement buffer-local memory barrier based on cache coherency matrix.
This takes advantage of the previously introduced cache tracking
infrastructure in order to define a multi-purpose barrier operation
that allows the caller to order memory operations with respect to
previous operations performed on the same buffer from any other cache
domain.
v2: Assorted CPU overhead micro-optimizations (Francisco).
v3: Use C99 designated initializers (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3875>
projects / mesa.git / log