intel/compiler: Limit compaction unit tests to specific gens

Two of the tests emit instructions with MRF destinations, and MRFs
aren't present on Gen7+. I think we were just lucky that this didn't
cause a problem earlier since we were running the tests on Gen7-9.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>

intel/compiler: Don't disassemble align1 3-src operands on Gen < 10

Since the platforms don't support align1 3-src instructions, the
contents of these operands are not going to be meaningful. Just don't
print them to avoid hitting some assertions in brw_inst functions.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>

intel/compiler: Split has_64bit_types into float/int

Gen7 has 64-bit floats but not 64-bit ints.

Acked-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>

intel/compiler: Extract GEN_* macros into separate file

Will be used by the instruction compaction unit test.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>

intel/compiler: Use ARRAY_SIZE()

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2635>

intel/fs: Don't emit control barrier if only one thread is used

When there's only one hardware thread (i.e. the dispatch width greater
or equal to the workgroup size), there's no need to use a barrier to
ensure all the invocations reach the same point in the shader, because
they are already running lock-step.

Results for SKL running Iris for shader-db tests with compute shaders

    total sends in shared programs: 18361 -> 18339 (-0.12%)
    sends in affected programs: 904 -> 882 (-2.43%)
    helped: 9
    HURT: 0
    helped stats (abs) min: 1 max: 5 x̄: 2.44 x̃: 2
    helped stats (rel) min: 0.84% max: 21.43% x̄: 7.82% x̃: 2.67%
    95% mean confidence interval for sends value: -3.31 -1.58
    95% mean confidence interval for sends %-change: -14.67% -0.97%
    Sends are helped.

Shaders from Aztec Ruins, Car Chase, Manhattan and DeusEx are helped.

Results for ICL and TGL are similar to SKL.

Results for BDW are similar to SKL except for DeusEx shader that has a
workgroup size 16 but in BDW picks the SIMD8.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>

intel/fs: Don't emit fence for shared memory if only one thread is used

When there's only one hardware thread (i.e. the dispatch width greater
or equal to the workgroup size), there's no need to synchronize shared
memory access (SLM) since all the requests from a single thread are
already synchronized.  In such case, we just add a scheduling fence.

To be able to identify that case for all platforms, move the handling
of platforms prior to Gen11 (which don't have a separate SLM fence)
after the optimization.

Results for SKL running Iris for shader-db tests with compute shaders

    total sends in shared programs: 18395 -> 18361 (-0.18%)
    sends in affected programs: 938 -> 904 (-3.62%)
    helped: 9
    HURT: 0
    helped stats (abs) min: 1 max: 5 x̄: 3.78 x̃: 4
    helped stats (rel) min: 1.56% max: 26.32% x̄: 10.33% x̃: 2.60%
    95% mean confidence interval for sends value: -4.85 -2.71
    95% mean confidence interval for sends %-change: -19.12% -1.54%
    Sends are helped.

Shaders from Aztec Ruins, Car Chase, Manhattan and DeusEx are helped.

Results for ICL and TGL are similar to SKL.

Results for BDW are similar to SKL except for DeusEx shader that has a
workgroup size 16 but in BDW picks the SIMD8.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>

intel/fs: Add workgroup_size() helper

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>

intel/fs: Add FS_OPCODE_SCHEDULING_FENCE

Like a SHADER_OPCODE_MEMORY_FENCE but doesn't doesn't generate any
assembly code.

Will be used when the compiler shouldn't reorder certain instructions
but there's no need to generate code for the HW to do it -- as the
ordering will be guaranteed by other means.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>

gallium: check all planes' pipe formats in case of multi-samplers

Current code only checks whether first plane's format is supported
in case YUV format sampling is done by sampling each plane separately.
It would be safer to check other planes' as well.

Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2863>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2863>

anv: Drop some workarounds that are no longer necessary

These workarounds are no longer required by 10th Gen hardware.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3495>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3495>

iris: Drop some workarounds which are no longer necessary

These workarounds are no longer required by 10th Gen hardware.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3495>

turnip: Disable UBWC on images used as storage images.

The closed GL driver doesn't use UBWC on any storage images.  It does tile
mostly (skipping tiling on writeonly images, it seems), but for freedreno
we've been enabling tiling in all cases and it's fine.  We do need to
disable UBWC, as tests fail otherwise and just plugging in the equivalent
UBWC regs like we were setting up a texture isn't enough.

Fixes dEQP-VK.image.atomic_operations.*

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3433>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3433>

turnip: Add limited support for storage images.

So far this doesn't handle the texture state-based storage image access
loads, and doesn't support descriptor arrays (same as SSBOs).  The texture
side is more tricky, since we have another remapping table to work around.

This is enough to get some of dEQP-VK.image.atomic_operations.* working.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3433>

turnip: Refactor the intrinsic lowering.

Too many things in one function, split them out based on the intrinsic.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3433>

turnip: Fix some whitespace around binary operators.

Conforms to mesa style and the rest of turnip.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3433>

radeonsi: Drop PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS.

Now that we don't expose TGSI, we can stop exposing the flag.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3493>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3493>

r300: Remove a bunch of default handling of pipe caps.

u_screen will return 0 for all of these, which means that this is one
less driver to see in git grep when I'm checking who exposes a cap.
The exception is the texel/gather offsets and stream output
components, which will not be exposed since we don't expose the
corresponding GLSL version.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3493>

r600: Remove a bunch of default handling of pipe caps.

u_screen will return 0 for all of these, which means that this is one
less driver to see in git grep when I'm checking who exposes a cap.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3493>

radeonsi: Remove a bunch of default handling of pipe caps.

u_screen will return 0 for all of these, which means that this is one
less driver to see in git grep when I'm checking who exposes a cap.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3493>

anv: don't report error with other vendor DRM devices

Enumeration should just skip unsupported DRM devices.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 34c8621c3b37 ("anv: Allow enumerating multiple physical devices")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2386
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3481>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3481>

freedreno: Stop scattered remapping of SSBOs/images to IBOs.

Just make it be all SSBOs then all storage images.  The remapping table
was there to make it so that the big gap present from gallium's atomic
lowering would get cleaned up, but that's no longer case.  The table has
made it very hard to support Vulkan storage images, so it's time for it to
go.

This does mean that an SSBO/IBO that is only loaded (or size-queried) will
now occupy a slot in the table where it wouldn't before.  This seems like
a minor cost compared to being able to drop this much logic.

With the remapping table gone, SSBO array handling for turnip just falls
out.

Fixes many array cases of
dEQP-VK.binding_model.shader_access.primary_cmd_buf.storage_buffer.*

Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jonathan Marek <jonathan@marek.ca> (turnip)
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

compiler: Add a note about how num_ssbos works in the program info.

These numbers are always confusing, and it's particularly so for this
field where it has a different meaning in different info structs.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

nir: Drop the ssbo_offset to atomic lowering.

The arguments passed in were:
- prog->info.num_ssbos
- prog->nir->info.num_ssbos
- arbitrary values for standalone compilers

The num_ssbos should match between the prog's info and prog->nir's info
until this lowering happens.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

gallium: Pack the atomic counters just above the SSBOs.

We carve out half the SSBO space for atomics, and we were just binding
them way up there.  freedreno was then using a remapping table to map the
sparse buffer index back down, since space in the descriptor array is a
shared resource that may limit parallelism.  That remapping table
generated inside of the ir3 compiler is getting thoroughly in the way of
implementing vulkan descriptor sets.

We will be able to get rid of the freedreno's remapping table, and
hopefully save shared resources on other hardware, by packing the atomics
tightly above the SSBOs (like i965 does).  We already rebind the shader
buffers on program change if either the old or new program has SSBOs or
ABOs, so this doesn't necessarily increase the program state change cost
(the only cost increase I can come up with is if you're using the same
atomic counter without rebinding it across changes of programs with
varying SSBO counts, meaning it would now bounce around index space).

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

mesa: Make atomic lowering put atomics above SSBOs.

Gallium arbitrarily (it seems) put atomics below SSBOs, resulting in a
bunch of extra index management, and surprising shader code when you would
see your SSBOs up at index 16.  It makes a lot more sense to see atomics
converted to SSBOs appear as magic high numbers.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

turnip: Refactor linkage state setup.

As I touch this for descriptor set reworks, I don't want to have to update
it twice.

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3240>

nouveau/nvc0: add extern keyword to nvc0_miptree_vtbl.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>

anv: initialize clear_color_is_zero_one

Fixes following valgrind warning:

   ==12508== Conditional jump or move depends on uninitialised value(s)
   ==12508==    at 0x2CCD8B79: cmd_buffer_begin_subpass (genX_cmd_buffer.c:4599)
   ==12508==    by 0x2CCDA72B: gen9_CmdBeginRenderPass (genX_cmd_buffer.c:5275)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3487>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3487>

panfrost/midgard: Print the actual source register for store operations

Store operation use r26/r27 but have a word->reg set to 0 or 1 (base is
r26). Let's take this base offset into account in
print_load_store_instr().

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3482>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3482>

panfrost: Add pandecode entries for ASTC/ETC formats

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

panfrost: Add ASTC texture formats

Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

panfrost: Add ETC1/ETC2 texture formats

Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

panfrost: Rework linear<--->tiled conversions

There's a lot going on here (it's a ton of commits squashed together
since otherwise this would be impossible to review...)

1. We have a fast path for linear->tiled for whole (aligned) tiles, but we
have to use a slow path for unaligned accesses. We can get a pretty
major win for partial updates by using this slow path simply on the
borders of the update region, and then hit the fast path for the
tile-aligned interior. This does require some shuffling.

2. Mark the LUTs constant, which allows the compiler to inline them,
which pairs well with loop unrolling (eliminating the memory accesses
and just becoming some immediates.. which are not as immediate on
aarch64 as I'd like..)

3. Add fast path for bpp1/2/8/16. These use the same algorithm and we
have native types for them, so may as well get the fast path.

4. Drop generic path for bpp != 1/2/8/16, since these formats are
generally awful and there's no way to tile them efficienctly and
honestly there's not a good reason too either. Lima doesn't support any
of these formats; Panfrost can make the opinionated choice to make them
linear.

5. Specialize the unaligned routines. They don't have to be fully
generic, they just can't assume alignment. So now they should be nearly
as fast as the aligned versions (which get some extra tricks to be even
faster but the difference might be neglible on some workloads).

6. Specialize also for the size of the tile, to allow 4x4 tiling as well
as 16x16 tiling. This allows compressed textures to be efficiently tiled
with the same routines (so we add support for tiling ASTC/ETC textures
while we're at it)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> #lima on Mali400
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

panfrost,lima: De-Galliumize tiling routines

There's an implicit dependence on Gallium here that will add more
complexity than needed when testing/optimizing out of driver as well as
potentially Vulkanizing. We don't need a full pipe_box, just the x/y/w/h
properties directly.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> #lima on Mali400
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

panfrost: Compile tiling routines with -O3

These are major hot spots for panfrost and lima; better let the compiler
do its thing even on debug builds.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> #lima on Mali400
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3414>

radv: Remove syncobj_handle variable in header.

I strongly suspect it was supposed to be a typedef. However, used
nowhere, we should remove it.

Fixes: eaa56eab6da "radv: initial support for shared semaphores (v2)"
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2385
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3479>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3479>

gitlab-ci/lava: add pipeline information in the lava job name

In order to have more informations in the LAVA jobs list, add the
current pipeline URL and commit ref name in the LAVA job name.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2337>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2337>

gallium/gallivm: enable linking lp_bld_printf function with C++ code

To enable linking functions declared in lp_bld_printf.h file with C++,
we need to add appropriate macros to the header.

Reviewed-by: Krzysztof Raszkowski <krzysztof.raszkowski@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3470>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3470>

iris: Fix value of out-of-bounds accesses for vertex attributes

Having VERTEX_BUFFER_STATE.BufferSize greater than the size of
a bound vertex buffer allows shader to read uninitialized vertex
attributes from BO, instead of allowing hardware to return zeroes
on out-of-bounds access.

OpenGL spec "6.4 Effects of Accessing Outside Buffer Bounds" says:

"Robust buffer access can be enabled by creating a context with robust access
 enabled through the window system binding APIs. When enabled, any command
 unable to generate a GL error as described above, such as buffer object accesses
 from the active program, will not read or modify memory outside of the data
 store of the buffer object and will not result in GL interruption or termination.
 Out-of-bounds reads may return values from within the buffer object or zero
 values."

Fixes three webgl tests:
 conformance/rendering/out-of-bounds-array-buffers.html
 conformance2/rendering/out-of-bounds-index-buffers-after-copying.html
 conformance2/rendering/element-index-uint.html

See #1996

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3427>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3427>

ci: Re-enable CI for lima on mali450

Amend fails and skips lists basing on lists from Andreas Baierl,
shard mali400 job across two devices since it takes close to 10min
and rename jobs to lima-mali400-test and lima-mali450-test.

Also don't set MESA_GLES_VERSION_OVERRIDE=3.0 for lima since we don't support
GLES 3.0 and lower DEQP_PARALLEL to 3 for jobs on H3.

Keep mali400 jobs disabled atm since they take too much time to complete
and we also get some unexplicable failures in dEQP-GLES2.functional.default_vertex_attrib.*

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>

ci: lava: pass CI_NODE_INDEX and CI_NODE_TOTAL to lava jobs

deqp-runner.sh uses it to determine whether we split job across multiple
devices and if we do what's the node index.

With this change we now can set 'parallel: N' in job description if we want
to split the job.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3163>

turnip: fix invalid VK_ERROR_OUT_OF_POOL_MEMORY

When VK_DESCRIPTOR_TYPE_SAMPLER is provided, it doesn't need to be
counted as a buffer count. Otherwise it leads to mismatch of allocated
buffer size, hitting VK_ERROR_OUT_OF_POOL_MEMORY finally.

Fixes: c39afe68f0390d45130c1317b3b7e65f55542c36
Also fixes amber tests:
./tests/cases/address_modes_float.amber
./tests/cases/address_modes_int.amber
./tests/cases/magfilter_linear.amber
./tests/cases/magfilter_nearest.amber

Reviewed-by: Jonathan Marek <jonathan@marek.ca>

clover: Initialize Asm Parsers

Fixes piglits that use ADMGCN inline assembly:
program@execute@calls
program@execute@amdgcn-mubuf-negative-vaddr

CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>

anv: Allow enumerating multiple physical devices

Instead of having a single physical device in anv_instance, have a
linked list of them.  What we have now works today because we our GPUs
are build into the CPU and so you're guaranteed to only ever have one of
them.  One day, that will change and we want ANV to be ready.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Re-arrange physical_device_init

This commit simply moves fetching the device info and checking if ANV
supports the device a bit higher up.  This way we fail earlier and it'll
make error checking easier in the next commit.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Drop separate chipset_id fields

This already exists in gen_device_info.  There's no reason to keep
duplicate copies.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Move the physical device dispatch table to anv_instance

We don't actually have genX versions of any physical device level
commands so we don't need the trampoline versions and we don't need to
have a separate table per physical device.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Drop the instance pointer from anv_device

There are very few times when we actually want to fetch the instance
from the anv_device.  We can put up with a bit of pain there in exchange
for strongly discouraging people from doing this in general.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Stop allocating WSI event fences off the instance

Fixes: 16eb390834d "anv: add VK_EXT_display_control to anv driver [v5]"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Take a device in anv_perf_warn

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Take an anv_device in vk_errorf

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

anv: Add an anv_physical_device field to anv_device

Having to always pull the physical device from the instance has been
annoying for almost as long as the driver has existed.  It also won't
work in a world where we ever have more than one physical device.  This
commit adds a new field called "physical" to anv_device and switches
every location where we use device->instance->physicalDevice to use the
new field instead.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3461>

radeonsi/gfx10: enable GS fast launch for triangles and strips with NGG culling

Only non-indexed triangle lists and strips are supported. This increases
performance if there is something to cull.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: rewrite late alloc computation

- Use conservative late alloc when the number of CUs <= 6.
- Move the late alloc GS register to the GS shader state, so that it can be
  tuned for NGG culling.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: add helper ac_build_triangle_strip_indices_to_triangle

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: implement NGG culling for 4x wave32 subgroups

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: move GE_PC_ALLOC setting to shader states

The value is not changed. I just use a different way to compute it.

The value will vary with NGG culling.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: don't initialize VGPRs not used by NGG passthrough

v2: TES doesn't use the GS PrimitiveID

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: merge main and pos/param export IF blocks into one if possible

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: export primitives at the beginning of VS/TES

This decreases VGPR usage and will allow us to merge some IF blocks
in shaders.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: move s_sendmsg gs_alloc_req to the beginning of shaders

This will allow us to merge some IF blocks in shaders.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: correct VS PrimitiveID implementation for NGG

We didn't use the correct LDS pointer, though it probably doesn't matter,
because I think that nothing else is using LDS here.

This commit makes it consistent with all other esgs_ring use.

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi/gfx10: update comments and remove invalid TODOs

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: add ac_build_readlane without optimization barrier

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

ac: add prefix bitcount functions

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: turn an assertion into return in si_nir_store_output_tcs

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: fix doubles and int64

Fixes: 57bd73e2296 - radeonsi: remove llvm_type_is_64bit
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

radeonsi: don't invoke decompression inside internal launch_grid

Decompress resources properly but don't do it inside launch_grid
to prevent recursion.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: 19.3 <mesa-stable@lists.freedesktop.org>

radeonsi: clean up how internal compute dispatches are handled

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Cc: 19.3 <mesa-stable@lists.freedesktop.org>

Revert "radeonsi: unbind image before compute clear"

This reverts commit 3a527eda7ceee37643f948bfcf05285c5aa3a4d6.

It's incorrect.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

aco: implement nir_intrinsic_load_barycentric_at_sample on GFX6

GFX6 doesn't have FLAT instructions which means we have to emit
a 64-bit MUBUF load.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: add new addr64 bit to MUBUF instructions on GFX6-GFX7

According to the different ISA docs (and to LLVM), this bit seems
to only exists on GFX6-GFX7.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: do not use the vec3 variant for loads on GFX6

GFX6 only supports vec3 with load/store format.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: do not use the vec3 variant for stores on GFX6

GFX6 only supports vec3 with load/store format.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

aco: fix constant folding of SMRD instructions on GFX6

SMRD instructions have an 8-bit dword offset on SI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3432>

anv: Canonicalize buffer formats for image/buffer copies

Some formats, in particular YCbCr formats and ASTC have additional
restrictions.  We already whack ASTC formats to RGBA32_UINT because the
hardware doesn't allow LINEAR with ASTC.  However, we need to fix YCbCr
formats as well because they come with alignment restrictions that we
can't guarantee are satisfied.  We're using blorp_copy to do the copies
so we may as well just stomp formats for everything.

Fixes: b24b93d5843 "anv: enable VK_KHR_sampler_ycbcr_conversion"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>

anv/blorp: Rename buffer image stride parameters

The new names fit better with the Vulkan names and don't pretend to be
an actual image extent.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3460>

Revert "gallium: add st_context_iface::flush_resource to call FLUSH_VERTICES"

This reverts commit bec9c90b5ecf9cc2dc580f9ff297f94ba5aa3506.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>

Revert "st/dri: do FLUSH_VERTICES before calling flush_resource"

This reverts commit 3ba16d36c988a1c7b31c7fe44c1b6a24d9d8227d.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3472>

aco: fix fall-through test in try_remove_simple_block() with back-edges

3bca0af2 enhanced empty block determination which exposed this bug and
created an infinite loop in a Guild Wars 2 shader.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 3bca0af25dbf6d6b162463138100abb20bc1a1cc
     ('aco: ignore parallelcopies to the same register on jump threading')

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2364
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3452>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3452>

docs/GL4: update gallium/swr features

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>

aco: fix stack buffer overflow in apply_sgprs()

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: cef78797191 ('aco: rewrite apply_sgprs()')
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2361
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3442>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3442>

anv: add assert for isl_mod_info in choose_isl_tiling_flags

CID: 1457859
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>

anv: fix assert in GetImageDrmFormatModifierPropertiesEXT

CID: 1457861
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3469>

isl/gen12: add reminder comment about missing WA with 3D surfaces

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3441>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3441>

panfrost: Dynamically allocate shader variants

This fixes a crash in LZDoom where over 16 shader variants are needed
for a few shaders in some maps, and should also save a few kilobytes
of RAM as most of the time only one or two variants of the 8 previously
allocated are actually needed.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>

panfrost: Expose some functionality with dEQP flag

These features are stable enough that they don't need to be hidden.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3464>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3464>

pan/midgard: Fix recursive csel scheduling

Corner case causing invalid scheduling on shaders with nested csels,
i.e. GLSL code resembling:

   (foo ? bool1 : bool2) ? x : y

By explicitly disallowing csels this is fixed.

Fixes INSTR_INVALID_ENC on a glamor shader (noticeable with slowdown and
visual corruption when scrolling "too far" on GTK apps).

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3463>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3463>

panfrost: Identify un/pack colour opcodes

We still need to identify formats in the disassembler, but this will at
least get the opcode name clear.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>

pan/midgard: Bytemasks should round up, not round down

Otherwise we'll lost components in DCE.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3462>

panfrost: Compact the bo_access readers array

Previously, the array bo_access->readers was only cleared when there
were no unsignaled fences, which in some situations never happened.

That resulted in the array having thousands of NULL pointers, but only
a handful of active readers.

With this patch, all the unsignaled readers are moved to the front of
the array, effectively building a new array only containing the active
readers in-place. This results in the readers array usually only having
a couple of elements.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3419>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3419>

zink: support arrays of samplers

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: support sampling non-float textures

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: store image-type per texture

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: avoid incorrect vector-construction

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: support offset-variants of texturing

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

zink: implement nir_texop_txs

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3275>

docs: fixup indentation

The most canonical indentation-style here is two spaces, which is what
the standard boilerplate in all documents use. So let's normalize to
that.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>

docs: remove pointless, stray newline

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3443>