lima/ppir: fix src read mask swizzling

The src mask can't be calculated from the dest write_mask.
Instead, it must be calculated from the swizzled operators of the src.
Otherwise, liveness calculation may report incorrect live components for
non-ssa registers.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>

lima/ppir: split ppir_op_undef into undef and dummy again

Those were renamed/merged some time ago but it turns out that
ppir_op_undef can't be shared.
It was being used for undefined ssa operations and for read-before-write
operations that may happen to e.g. uninitialized registers (non-ssa)
inside a loop.
We really don't want to reserve a register for the undef ssa case, but
we must reserve and allocate register for the unitialized register case
because when it happens inside a loop it may need to hold its value
across iterations.

This dummy node might be eliminated with a code refactor in ppir in case
we are able to emit the write and allocate the ppir_reg before we emit
the read. But a major refactor we need this to keep this code to avoid
apparent regressions with the new liveness analysis implementation.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>

lima/ppir: fix ssa undef emit

The ssa doesn't need to be manually added to block->comp->reg_list.
Doing so actually causes other registers to be marked as undef=true
later.

This patch alone fixes a few deqp tests that have undefs.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>

lima/ppir: handle write to dead registers in ppir

nir can output writes to dead registers when expanding vec4 operations
to non-ssa registers. In that case, some components of the vec4 may be
assigned but never read. These are also not currently removed by a nir
dead code elimination pass as they are not ssa.
In order to prevent regalloc from allocating a live register for this
operation, an interference must be assigned to it during liveness
analysis.

This workaround may be removed in the future if the assignments to dead
components can be removed earlier in ppir or nir.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>

radeonsi: fix a regression since the addition of si_shader_llvm_vs.c

Fixes: cd5b99c541d241d - radeonsi: move VS shader code into si_shader_llvm_vs.c
Closes: #2416
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3561>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3561>

radeonsi: make screen available to shader part compilation

to fix a crash in is_multi_part_shader.

Fixes: 1a0890dcf30 - radeonsi: change prototypes of si_is_multi_part_shader & si_is_merged_shader
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3561>

anv: Rework CCS memory handling on TGL-LP

The previous way we were attempting to handle AUX tables on TGL-LP was
very GL-like.  We used the same aux table management code that's shared
with iris and we updated the table on image create/destroy.  The problem
with this is that Vulkan allows multiple VkImage objects to be bound to
the same memory location simultaneously and the app can ping-pong back
and forth between them in the same command buffer.  Because the AUX
table contains format-specific data, we cannot support this ping-pong
behavior with only CPU updates of the AUX table.

The new mechanism switches things around a bit and instead makes the aux
data part of the BO.  At BO creation time, a bit of space is appended to
the end of the BO for AUX data and the AUX table is updated in bulk for
the entire BO.  The problem here, of course, is that we can't insert the
format-specific data into the AUX table at BO create time.

Fortunately, Vulkan has a requirement that every TILING_OPTIMAL image
must be initialized prior to use by transitioning the image from
VK_IMAGE_LAYOUT_UNDEFINED to something else.  When doing the above
described ping-pong behavior, the app has to do such an initialization
transition every time it corrupts the underlying memory of the VkImage
by using it as something else.  We can hook into this initialization and
use it to update the AUX-TT entries from the command streamer.  This way
the AUX table gets its format information, apps get aliasing support,
and everyone is happy.

One side-effect of this is that we disallow CCS on shared buffers.
We'll need to fix this for modifiers on the scanout path but that's a
task for another patch.  We should be able to do it with dedicated
allocations.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

anv: Make anv_vma_alloc/free a lot dumber

All they do now is take a size, align, and flags and figure out which
heap to allocate in.  All of the actual code to deal with the BO is in
anv_allocator.c.  We want to leave anv_vma_alloc/free in anv_device.c
because it deals with API-exposed heaps so it still makes sense to have
it there.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

anv: Make AUX table invalidate a PIPE_* bit

This commit moves it in with all the other cache invalidation operations
as if it were done by PIPE_CONTROL even though it's a pair of register
writes.  This means we only have to write the GFX_AUX_TABLE_BASE_ADDR
register once at device initialization instead of every invalidate.
Invalidates are now a single LRI instead of two.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

anv: Add another align_down helper

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

isl: Add a helper for calculating subimage memory ranges

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

anv: Delete a redundant calculation

We compute the same thing with the same variable name at the top of the
function.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

intel/aux-map: Factor out some useful helpers

This breaks add_mapping() into three pieces:

    1. get_aux_entry() adds AUX-TT pages as needed and returns the
       L1 entry index, L1 entry address, and L1 entry map.

    2. gen_aux_map_format_bits_for_isl_surf() computes the format-
       specific information that goes in the AUX-TT entry.

    3. add_mapping() is a lot dumber function that now just adds the
       requested mapping with the requested format bits.

This lets us break out some additional helpers in the API which we want
to use for more direct AUX-TT management in ANV.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

intel/aux-map: Add some #defines

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3519>

radeonsi: expose shader cache stats to the HUD

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

radeonsi: print shader cache stats with AMD_DEBUG=cache_stats

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

radeonsi: restructure si_shader_cache_load_shader

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

radeonsi: use the live shader cache

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

gallium/util: add a cache of live shaders for shader CSO deduplication

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

util/simple_mtx: add a missing include to get ASSERTED

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2929>

intel/compiler: Add names for SHADER_OPCODE_[IU]SUB_SAT

Fixes: 58907568ec5 ("intel/fs: Add SHADER_OPCODE_[IU]SUB_SAT pseudo-ops")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3558>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3558>

anv: Always initialize target_stencil_layout

Pass down stencil data from the subpass attachment like we do
elsewhere.  Only stencil attachments will make use of it.

Fixes warnings like

    ../src/intel/vulkan/genX_cmd_buffer.c: In function ‘cmd_buffer_begin_subpass’:
    ../src/intel/vulkan/genX_cmd_buffer.c:4656:41: warning: ‘target_stencil_layout’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     4656 |       att_state->current_stencil_layout = target_stencil_layout;
          |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3557>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3557>

anv: Replace aux_surface.isl.size_B checks with aux_usage checks

Now that aux_usage has a unified meaning, aux_usage == NONE if and only
if aux_surface.isl.size_B > 0.  In most of these cases, the question
we're asking is "does have compression?" and not "have we allocated an
aux surface for compression?".

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3556>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3556>

anv: Rework the meaning of anv_image::planes[]::aux_usage

Previously, we set aux_usage=ISL_AUX_USAGE_NONE when we really meant
CCS_D.  This sort-of made sense before we had anv_layout_to_aux_usage
but now that we have that helper.  However, in our more modern aux
tracking model, all aux usage goes through anv_layout_to_* and we're
better off making the meaning of anv_image::planes[]::aux_usage be
AUX_USAGE_NONE if and only if there is no compression.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3556>

radv: print NIR shaders after lowering FS inputs/outputs

This is confusing otherwise.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3553>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3553>

intel/isl: Add a hack for the Gen12 A0 texture buffer bug

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>

intel/isl: Plumb devinfo into isl_genX(buffer_fill_state_s)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>

intel/disasm: Properly disassemble indirect SENDs

Instead of emitting g[a0]UD for the indirect descriptor, emit a0<0>UD.
This is more correct because there is no GRF involved.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>

intel/fs: Don't unnecessarily fall back to indirect sends on Gen12

The instruction encoding for SENDS changed on Gen12 and it now supports
embedding the entire extended message descriptor in the instruction if
it's an immediate.  Stop falling back to doing an indirect SEND just
because we had something in [15:12] of ex_desc.ud.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>

anv: Improve BTI change cache flushing

This commit makes two changes:

 1. We set pending_pipe_bits instead of emitting PIPE_CONTROL directly
    for the flush at the end of cmd_buffer_begin_subpass.

 2. Because BLORP ops such as vkCmdClearAttachments may come in the
    middle of a render pass, we have to also flag the need for a cache
    flush after the blorp op.

Fixes: 185630c6bc97 "anv/blorp: Do the gen11 BTI flush"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3547>

panfrost: Fix 32-bit warning for `indices`

../src/gallium/drivers/panfrost/pan_context.c: In function ‘panfrost_draw_vbo’:
../src/gallium/drivers/panfrost/pan_context.c:1551:70: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
                 ctx->payloads[PIPE_SHADER_FRAGMENT].prefix.indices = (u64) NULL;
                                                                      ^

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reported-by: Icecream95 <ixn@keemail.me>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>

pan/decode: Remove SHORT_SLIDE indirection

../src/panfrost/pandecode/decode.c: In function ‘pandecode_compute_fbd’:
../src/panfrost/pandecode/decode.c:789:35: warning: taking address of packed member of ‘struct mali_compute_fbd’ may result in an unaligned pointer value [-Waddress-of-packed-member]
  789 |         pandecode_u32_slide(num, s->unknown ## num, ARRAY_SIZE(s->unknown ## num))
      |                                  ~^~~~~~~~~
../src/panfrost/pandecode/decode.c:800:9: note: in expansion of macro ‘SHORT_SLIDE’
  800 |         SHORT_SLIDE(1);
      |         ^~~~~~~~~~~

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>

pan/midgard: Remove pack_color define

Unused at the moment.

../src/panfrost/midgard/midgard_compile.c:124:29: warning: ‘m_pack_colour’ defined but not used [-Wunused-function]
  124 |  static midgard_instruction m_##name(unsigned ssa, unsigned address) { \
      |                             ^~
../src/panfrost/midgard/midgard_compile.c:145:22: note: in expansion of macro ‘M_LOAD_STORE’
  145 | #define M_LOAD(name) M_LOAD_STORE(name, false)
      |                      ^~~~~~~~~~~~
../src/panfrost/midgard/midgard_compile.c:213:1: note: in expansion of macro ‘M_LOAD’
  213 | M_LOAD(pack_colour);
      | ^~~~~~

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>

pan/decode: Remove last_size

Fixes ../src/panfrost/pandecode/decode.c: In function ‘pandecode_jc’:
../src/panfrost/pandecode/decode.c:2859:14: warning: variable ‘last_size’ set but not used [-Wunused-but-set-variable]
 2859 |         bool last_size;

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>

panfrost: Don't use implicit mali_exception_status enum

Fixes ../src/panfrost/pandecode/public.h:53:33: warning: ‘enum mali_exception_access’ declared inside parameter list will not be visible outside of this definition or declaration

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3543>

radv: enable ACO support for GFX6

CTS should pass, as well as Crucible and the few number of Piglit tests.

List of game benchmarks tested:
- Dawn of War 3
- Serious Sam 2017
- Shadow of The Tomb Raider
- The Talos Principle
- Thrones of Britannia
- Total Warhammer 2
- Total War: Three Kingdoms

Note that F12017 hangs with or without ACO on GFX6 at the moment.

My whole pipelinedb (~30 games) doesn't trigger any compiler crashes.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2401
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3533>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3533>

aco: copy the literal offset of SMEM instructions to a temporary

GFX6 only supports up to 8-bit for the literal offset, so make sure
it's copied to a temporary SGPR before emitting a SMEM instruction.
The optimizer will propagate the literal offset if possible anyways.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3533>

aco: fix a hazard with v_interp_* and v_{read,readfirst}lane_* on GFX6

It's required to insert 1 wait state if the dst VGPR of any v_interp_*
is followed by a read with v_readfirstlane or v_readlane to fix GPU
hangs on GFX6. Note that v_writelane_* is apparently not affected.
This hazard isn't documented anywhere but AMD confirmed it.

This fixes a GPU hang with the texturemipmapgen Sascha demo on GFX6.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3533>

aco: fix a hardware bug for MRTZ exports on GFX6

GFX6 (except OLAND and HAINAN) has a bug that it only looks at
the X writemask component.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3533>

turnip: Implement vkCmdCopyQueryPoolResults for occlusion queries

Use CP_COND_EXEC and CP_COND_WRITE to conditionally copy the results
of a query to a buffer based off the query's availability.

Fixes: #2238
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Implement vkCmdResetQueryPool

Clears the available bit for each requested query on the GPU.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Implement vkGetQueryPoolResults for occlusion queries

Implements fetching the results of a query pool with the
VK_QUERY_RESULT_WAIT_BIT, VK_QUERY_RESULT_WITH_AVAILABILITY_BIT,
and VK_QUERY_RESULT_PARTIAL_BIT flags.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Update query availability on render pass end

Unlike on an immidiate-mode renderer, Turnip only renders tiles on
vkCmdEndRenderPass. As such, we need to track all queries that were
active in a given render pass and defer setting the available bit
on those queries until after all tiles have rendered.

This commit adds a draw_epilogue_cs to tu_cmd_buffer that is
executed as an IB at the end of tu_CmdEndRenderPass. We then emit
packets to this command stream that update the availability bit of a
given query in tu_CmdEndQuery.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Implement vkCmdEndQuery for occlusion queries

Mostly a translation of freedreno's implementation of glEndQuery for
GL_SAMPLES_PASSED query objects with a slight modification to set the
availability bit of the query bo (slot->available) if the query was
not ended inside a render pass.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Implement vkCmdBeginQuery for occlusion queries

Mostly a translation of freedreno's implementation of glBeginQuery for
GL_SAMPLES_PASSED query objects with special logic for handling tiled
render passes.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Implement vkCreateQueryPool for occlusion queries

General structure is inspired by anv's implementation in genX_query.c.
We define a packed struct that tracks sample count at the beginning of
the query and at the end; the result of the occlusion query is then
slot->end - slot->begin.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

turnip: Update tu_query_pool with turnip-specific fields

tu_query_pool was forked from radv_query_pool, but we will need a
different set of fields to implement queries in turnip.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3279>

anv: Allow HiZ in read-only depth layouts

This improves the performance of Aztec Ruins by 5% on ICL.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>

anv: Add a usage parameter to anv_layout_to_aux_usage

Most places we actually know the usage and can provide it.  There are
two exceptions to this:

 1. We pass 0 into get_blorp_surf_for_anv_image when we use
    ANV_IMAGE_LAYOUT_EXPLICIT_AUX because anv_layout_to_aux_usage is
    never actually called so it doesn't matter.

 2. We pass 0 into anv_layout_to_aux_usage in transition_color_buffer.
    However, the coming commits which will begin using the usage
    parameter only care about depth.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>

anv: Use isl_aux_state for HiZ resolves

Rather than looking at the aux usage, we look at the isl_aux_state which
provides us with more detailed information.  This commit adds a couple
helpers to isl which let us quickly determine if we have valid depth/hiz
on the initial layout and if we need valid depth/hiz for the final
layout.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>

anv: Add a layout_to_aux_state helper

This new helper maps VkImageLayout enums to isl_aux_state enums which
are the hardware's concept of image layouts.  We can then use the aux
state to get the fast clear type and the aux usage.  This should yield
no functional change in driver behavior.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>

anv: Use TRANSFER_SRC_OPTIMAL for depth/stencil MSAA resolves

As of 52ad1712ed62, TRANSFER_SRC_OPTIMAL and SHADER_READ_ONLY_OPTIMAL
are now identical for depth buffers so there's no reason why we need to
use the "wrong" layout.  Technically, according to Vulkan, blits and
MSAA resolves are transfer ops so we should use the transfer layout now
that we can.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2605>

intel/blorp: resize src and dst surfaces separately

When copying to an RGB surface, we treat it as an R only one of three
times the width, which may end up being larger than the maximum size
supported by the hardware and so it hits the shrink path. This forced
both source and destination surfaces to be shrunk, even though it's not
necessary for the former, and may even hit some assertions in some
cases, such as the surface being compressed.

Fixes several tests under dEQP-VK.api.copy_and_blit.core.image_to_image.dimensions.*

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3422>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3422>

aco: combine MRTZ (depth, stencil, sample mask) exports

Instead of emitting up to 3 for each different components (depth,
stencil and sample mask). This is needed to fix a hw bug on GFX6.

Totals from affected shaders:
SGPRS: 34728 -> 35056 (0.94 %)
VGPRS: 26440 -> 26476 (0.14 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 1346088 -> 1344180 (-0.14 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 3922 -> 3915 (-0.18 %)
Wait states: 0 -> 0 (0.00 %)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3538>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3538>

aco/gfx10: Fix VcmpxExecWARHazard mitigation.

The SOPP instruction shouldn't have a definition, and its block
should be set to -1 in order to prevent it from being recognized
as a branch.
Also fix a typo in the readme.

Fixes: d6dfce02d074d615a3b88a3fccd8ee8c7e13c010
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3552>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3552>

aco: Transform uniform bitwise instructions to 32-bit if possible.

This allows removing superfluous s_cselect instructions
that come from turning booleans into 64-bit vector condition.

v2 by Daniel Schürmann:
- Make the code massively simpler
v3 by Timur Kristóf:
- Fix regressions, make it work in wave32 mode
- Eliminate extra moves by not always using the SCC definition
- Use s_absdiff_i32 for uniform XOR
- Skip the transformation for uncommon or invalid instructions

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3450>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3450>

etnaviv: update Android build files

etnaviv no longer builds on Android, fix this.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3447>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3447>

aco: use nir_move_copies

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

radv/aco: use ACO for GS copy shaders

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: implement GS copy shaders

v5: rebase on float_controls changes
v7: rebase after shader args MR and load/store vectorizer MR

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: remove needs_instance_id

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: explicitly mark end blocks for exports

For GS copy shaders, whether we want to do exports is conditional. By
explicitly marking the end blocks, we can mark an IF's then branch as an
export block and ensure that's where the assembler inserts null exports.

v6: only fixup exports in the end block, like before
v8: simplify some code

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

radv/aco: allow ACO for GS

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: implement GS on GFX7-8

GS is the same on GFX6, but GFX6 isn't fully supported yet.

v4: fix regclass
v7: rebase after shader args MR

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

radv/aco,aco: implement GS on GFX9+

v2: implement GFX10
v3: rebase
v7: rebase after shader args MR
v8: fix gs_vtx_offset usage on GFX9/GFX10
v8: use unreachable() instead of printing intrinsic
v8: rename output_state to ge_output_state
v8: fix formatting around nir_foreach_variable()
v8: rename some helpers in the scheduler
v8: rename p_memory_barrier_all to p_memory_barrier_common
v8: fix assertion comparing ctx.stage against vertex_geometry_gs

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: improve support for s_sendmsg

In particular, the messages needed for GS.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

radv: move gs copy shader creation before other variants

ACO lowers output derefs which breaks the shader_info pass used by gs copy
shader creation.

v3: rebase

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2421>

aco: Make a better guess at which instructions need the VCC hint.

Previously, bool_to_vector_condition would always set the VCC hint
on its result. This commit improves it by having the optimizer set
the VCC hint only when the result really needs to be in the VCC.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3451>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3451>

gallium/swr: implementation of tessellation shaders compilation

TCS and TES shaders compilation mechanisms in SWR and state
management implementation.

Reviewed-by: Krzysztof Raszkowski <krzysztof.raszkowski@intel.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Acked-by: Roland Scheidegger <sroland@vmware.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3484>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3484>

radv: Allow DCC & TC-compat HTILE with VK_IMAGE_CREATE_EXTENDED_USAGE_BIT.

I misunderstood the flag when initially disabling. But this flag
only does something with mutable formats. If we have DCC and
mutable formats, the formats are close enough that the allowed
usage flags are not meaningfully different nor used during
allocation.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3424>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3424>

radv: Expose VK_KHR_swapchain_mutable_format.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2354
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3425>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3425>

freedreno: Document CP_INDIRECT_BUFFER_CHAIN

This will let us use batch chaining instead of growing batches on a5xx
and a6xx.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3537>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3537>

freedreno: Document CP_UNK_A6XX_55

Reviewed-by: Rob Clark <robdclark@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3537>

freedreno: Document CP_COND_REG_EXEC more

The vulkan blob uses the RENDER_MODE mode to condition a blit on the
render mode in traces of a dEQP triangle test.

Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3182>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3182>

ac/llvm: fix missing casts in ac_build_readlane()

Because ac_build_optimization_barrier() overwrites the original
src_type, we have to keep track of it before emitting that barrier.
Otherwise, wrong conversions are expected for pointers or small
bitsizes.

By doing this, we no longer need to do the cast dance in
ac_build_readlane_no_opt_barrier(), it was just necessary for
ac_build_optimization_barrier().

This fixes a bunch of crashes with subgroups related tests when
RADV_DEBUG=checkir is enabled, and it also fixes a compiler crash
with The Surge 2.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2395
Fixes: 0f45d4dc2b1 ("ac: add ac_build_readlane without optimization barrier")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3535>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3535>

anv/apply_pipeline_layout: Initialize the nir_builder before use

Fixes: #2410
Fixes: 3c754900b5f "nir: don't emit ishl in _nir_mul_imm() if backend doesn't support bitops"
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3548>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3548>

meson: Prefer 'iris' by default over 'i965'.

This changes the default driver for Intel Gen8-11 hardware to be
the newer 'iris' driver rather than the older 'i965' driver.  To
continue using i965, pass -Dprefer-iris=false when building.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3540>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3540>

drisw: Cache the depth of the X drawable

This is not always ->rgbBits, because there are cases where that could
be 32 but we're (legally) bound to a depth-24 pixmap. The important
thing to have match here is the actual server-side notion of depth.  You
can look this up (at modest expense) from the xlib visual info if the
fbconfig has a visual. But it might not, so if not, fetch it (at
slightly greater expense) from XGetGeometry. Do this at GLX drawable
creation so you don't have to do it on the SwapBuffers path.

Apparently this fixes glx/glx-swap-singlebuffer, which is unintentional
but quite pleasant.

Fixes: mesa/mesa#2291
Fixes: 90d58286 ("drisw: Fix and simplify drawable setup")
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3305>

turnip: Convert the rest of tu_cmd_buffer.c over to the new pack macros.

There are only a couple of hard cases left using pkt4, where the register
number to write is computed.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>

turnip: Convert renderpass setup to the new register packing macros.

This gets a lot of the hard code converted over to the new macros,
resulting in (I feel) much more readable code with
LESS_SHOUTING_ABOUT_THE_REG().  I decided to consistently put the reg on
its own line, so that all the register names line up.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>

turnip: Port krh's packing macros from freedreno to tu.

This introduces some minor unpacking of the temporary fd_reg_pair structs
to code that previously was packing a whole register field.

In the pack wrapper in tu_cs.h, I added some explanatory docs, dropped the
relocs handling since we don't need it, and removed the extra regs[] in
the __ONE_REG() macro (which was causing gcc's optimizer to fall on its
face in my release build).

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>

freedreno: Fix OUT_REG() on address regs without a .bo supplied.

Sometimes you want to zero out an address by supplying a NULL BO, but
without this we would end up only emitting one dword.  Increases size of
fd6_gmem.o by .8%, though it's not clear to me why (no obvious terrible
codegen happening)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>

freedreno: Add some missing a6xx address declarations.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3455>

relnotes: Add GL_INTEL_shader_integer_functions2 and VK_INTEL_shader_integer_functions2

Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

lima: use imul for calculations with intrinsic src

It's source is supposed to be int, so we have to use integer
multiplication otherwise we'll get undefined result.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3529>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3529>

nir: don't emit ishl in _nir_mul_imm() if backend doesn't support bitops

Otherwise we'll have to lower it later.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3529>

pan/decode: Rotate trace files

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

pan/decode: Dump to a file

The file name is taken from the environment variable
PANDECODE_DUMP_FILE, defaulting to pandecode.dump if it is not set.

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

pan/decode: Support dumping to a file

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

pan/bifrost: Support disassembling to a file

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

pan/midgard: Support disassembling to a file

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

pan/midgard: Fix a memory leak in the disassembler

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3525>

turnip: Fix execution of secondary cmd bufs with nothing in primary.

We want to finish off cmd emission in the primary CS and add its entry to
the IB, but regardless of whether there had been anything in the primary
CS to emit, we still need a reserved CS entry for the loop below.

Fixes crashes in dEQP-VK.binding_model.shader_access.secondary_cmd_buf.*
and many more in dEQP-VK.renderpass*

Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3524>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3524>

panfrost: Drop mysterious zero=0xFFFF field

It doesn't seem to affect any results and it's not at all clear if/why
the blob sometimes(?) sets it? So let's clean this up since this
solution isn't correct anyway.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3513>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3513>

pan/midgard: Fix bundle dynarray leak

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3496>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3496>

radeonsi: separate LLVM compilation from non-LLVM code

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>

radeonsi: change prototypes of si_is_multi_part_shader & si_is_merged_shader

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>

radeonsi: make si_compile_shader return bool

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>

radeonsi: make si_compile_llvm return bool

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>

radeonsi: move more LLVM functions into si_shader_llvm.c

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3421>