st/xa: Fixups for PIPE_FORMAT_R8_UNORM A8 usage v2.

Check for PIPE_FORMAT_R8_UNORM when setting up the copy shader.
Also re-enable the dest alpha blending with A8 destination that
actually turned out to be correct.

Verified using rendercheck that the composite operators
overreverse, in, out, atop, atopreverse and xor seem to work fine
with a8 destiation.

v2: Fix a copy-paste error.

Reported-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

st/mesa: keep track of saturated writes when eliminating dead code

It doesn't matter whether a write is saturated or not, in another
implementation it might even have been a separate opcode. This code was
most likely copied from the copy-propagation pass (where one does have
to distinguish saturation).

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: correctly detect inactive UBO arrays

Previously the code was trying to get the packing type from the array not the
interface.

Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Antia Puentes <apuentes@igalia.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

i965: add ARB_texture_barrier support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/gs: Fix extra level of indentation left by the previous commit.

I left a bunch of code indented a level in the previous patch to make
the diff easier to read.  But now we should fix that.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/gs: Use new NIR intrinsics.

By performing the vertex counting in NIR, we're able to elide a ton of
useless safety checks around every EmitVertex() call:

total instructions in shared programs: 3952 -> 3720 (-5.87%)
instructions in affected programs:     3491 -> 3259 (-6.65%)
helped:                                11
HURT:                                  0

Improves performance in Gl32GSCloth by 0.671742% +/- 0.142202% (n=621)
on Haswell GT3e at 1024x768.

This should also make it easier to implement Broadwell's "Static Vertex
Count" feature someday.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Add new GS intrinsics that maintain a count of emitted vertices.

This patch also introduces a lowering pass to convert the simple GS
intrinsics to the new ones.  See the comments above that for the
rationale behind the new intrinsics.

This should be useful for i965; it's a generic enough mechanism that I
could see other drivers potentially using it as well, so I don't feel
too bad about putting it in the generic code.

v2:
- Use nir_after_block_before_jump for the cursor (caught by Jason
  Ekstrand - I'd mistakenly used nir_after_block when rebasing this
  code onto the new NIR control flow API).
- Remove the old emit_vertex intrinsic at the end, rather than in
  the middle (requested by Jason).
- Use state->... directly rather than locals (requested by Jason).
- Report progress from nir_lower_gs_intrinsics() (requested by me).
- Remove "Authors:" section from file comment (requested by
  Michael Schellenberger Costa).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Add unit tests for control flow graphs.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>

nir/cf: Fix dominance metadata in the dead control flow pass.

The NIR control flow modification API churns the block structure,
splitting blocks, stitching them back together, and so on.  Preserving
information about block dominance is hard (and probably not worthwhile).

This patch makes nir_cf_extract() throw away all metadata, like we do
when adding/removing jumps.

We then make the dead control flow pass compute dominance information
right before it uses it.  This is necessary because earlier work by the
pass may have invalidated it.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/cf: Fix unlink_block_successors to actually unlink the second one.

Calling unlink_blocks(block, block->successors[0]) will successfully
unlink the first successor, but then will shift block->successors[1]
down to block->successor[0].  So the successors[1] != NULL check will
always fail.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/cf: Alter block successors before adding a fake link.

Consider the case of "while (...) { break }".  Or in NIR:

        block block_0 (0x7ab640):
        ...
        /* succs: block_1 */
        loop {
                block block_1:
                /* preds: block_0 */
                break
                /* succs: block_2 */
        }
        block block_2:

Calling nir_handle_remove_jump(block_1, nir_jump_break) will remove the break.
Unfortunately, it would mangle the predecessors and successors.

Here, block_2->predecessors->entries == 1, so we would create a fake
link, setting block_1->successors[1] = block_2, and adding block_1 to
block_2's predecessor set.  This is illegal: a block cannot specify the
same successor twice.  In particular, adding the predecessor would have
no effect, as it was already present in the set.

We'd then call unlink_block_successors(), which would delete the fake
link and remove block_1 from block_2's predecessor set.  It would then
delete successors[0], and attempt to remove block_1 from block_2's
predecessor set a second time...except that it wouldn't be present,
triggering an assertion failure.

The fix appears to be simple: simply unlink the block's successors and
recreate them to point at the correct blocks first.  Then, add the fake
link.  In the above example, removing the break would cause block_1 to
have itself as a successor (as it becomes an infinite loop), so adding
the fake link won't cause a duplicate successor.

v2: Add comments (requested by Connor Abbott) and fix commit message.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/cf: Conditionally do block_add_normal_succs() in unlink_jump();

There is a bug where we mess up predecessors/successors due to the
ordering of unlinking/recreating edges/adding fake edges.  In order to
fix that, I need everything in one routine.

However, calling block_add_normal_succs() isn't safe from
cleanup_cf_node() - it would crash trying to insert phi undefs.
So unfortunately I need to add a parameter.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/cf: Don't break outer-block successors in split_block_beginning().

Consider the following NIR:

   block block_0;
   /* succs: block_1 block_2 */
   if (...) {
      block block_1;
      ...
   } else {
      block block_2;
   }

Calling split_block_beginning() on block_1 would break block_0's
successors:  link_block() sets both successors of a block, so calling
link_block(block_0, new_block, NULL) would throw away the second
successor, leaving only /* succ: new_block */.  This is invalid: the
block before an if statement must have two successors.

Changing the call to link_block(pred, new_block, pred->successors[0])
would correctly leave both successors in place, but because unlink_block
may shift successor[1] to successor[0], it may not preserve the original
order.  NIR maintains a convention that successor[0] must point to the
"then" block, while successor[1] points to the "else" block, so we need
to take care to preserve this ordering.

This patch creates a new function that swaps out one successor for
another, preserving the ordering.  It then uses this to fix the issue.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/cf: Make a helper function for removing a predecessor.

I need to do this in a second place, and I'd rather make a helper
function than cut and paste the code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Validate that a block doesn't have two identical successors.

This is invalid, and causes disasters if we try to unlink successors:
removing the first will work, but removing the second copy will fail
because the block isn't in the successor's predecessor set any longer.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/lower_vec_to_movs: Don't emit unneeded movs

It's possible that, if a vecN operation is involved in a phi node, that we
could end up moving from a register to itself.  If swizzling is involved,
we need to emit the move but.  However, if there is no swizzling, then the
mov is a no-op and we might as well not bother emitting it.

Shader-db results on Haswell:

   total instructions in shared programs: 6262536 -> 6259558 (-0.05%)
   instructions in affected programs:     184780 -> 181802 (-1.61%)
   helped:                                838
   HURT:                                  0

Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nir/lower_vec_to_movs: Properly handle source modifiers on vecN ops

I don't know of any piglit tests that are currently broken.  However, there
is nothing stopping a vecN instruction from getting source modifiers and
lower_vec_to_movs is run after we lower to source modifiers.

Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i915: Make hw_prim[] const

The table used to map the GL primitive to the hw primitive never
changes so make it const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

t_dd_dmatmp: Make the render_tab[]s const

These tables hold function pointers and they never change so
make them const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: Remove unused HAVE_TRI_STRIP_1 defines

Defined to 0 in a few places, but it's not used anywhere.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Constify dmasz

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Silence comparison between signed and unsigned integer expression warnings

../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:83:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:83:55: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                                                       ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:116:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:116:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:140:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:140:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h: In function 'intel_render_line_loop_verts':
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:174:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:174:55: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                                                       ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:224:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:224:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:255:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:255:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:281:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j + 1);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:281:56: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j + 1);
                                                        ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h: In function 'intel_render_poly_verts':
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:313:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j + 1);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:313:59: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j + 1);
                                                           ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:365:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - nr);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:365:56: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - nr);
                                                        ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:83:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:83:55: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                                                       ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:116:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:116:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:140:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:140:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h: In function 'radeon_dma_render_line_loop_verts':
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:174:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:174:55: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j);
                                                       ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:224:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:224:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:255:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:255:52: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j);
                                                    ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:281:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
       nr = MIN2(currentsz, count - j + 1);
                         ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:281:56: warning: signed and unsigned type in conditional expression [-Wsign-compare]
       nr = MIN2(currentsz, count - j + 1);
                                                        ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h: In function 'radeon_dma_render_poly_verts':
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:313:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - j + 1);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:313:59: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - j + 1);
                                                           ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:365:28: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
          nr = MIN2(currentsz, count - nr);
                            ^
../../../../../src/mesa/tnl_dd/t_dd_dmatmp.h:365:56: warning: signed and unsigned type in conditional expression [-Wsign-compare]
          nr = MIN2(currentsz, count - nr);
                                                        ^

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Use stdbool.h

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: General indentation and formatting fixes

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_ELTS change

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Remove HAVE_ELTS support

Two drivers use this file, and neither supports ELTs.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_TRI_FANS change

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Require HAVE_TRI_FANS

Two drivers use this file, and both support triangle fans.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_TRI_STRIPS change

v2: Fix '- nr' typo noticed by Marius.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]

t_dd_dmatmp: Require HAVE_TRI_STRIPS

Two drivers use this file, and both support triangle strips.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Require HAVE_TRIANGLES

Two drivers use this file, and both support triangles.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_LINE_STRIPS change

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Require HAVE_LINE_STRIPS

Two drivers use this file, and both support line strips.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_LINES change

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Require HAVE_LINES

Two drivers use this file, and both support lines.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Indentation and formatting fixes after HAVE_QUADS change

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Remove HAVE_QUADS support

Two drivers use this file, and neither supports quads.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Remove HAVE_QUAD_STRIPS support

Two drivers use this file, and neither supports quad strips.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

t_dd_dmatmp: Use addition instead of subtraction in loop bounds

This is used everywhere else in this file because it avoids problems
when count is zero (due to trimming).

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38109
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: Marius Predut <marius.predut@intel.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

t_dd_dmatmp: Pull out common 'count -= count & 3' code

This was missing in the HAVE_TRIANGLES path, and that could cause
incorrect rendering.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38109
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: Marius Predut <marius.predut@intel.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

t_dd_dmatmp: Use '& 3' instead of '% 4' everywhere

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

t_dd_dmatmp: Clean up improper code formatting from previous patch

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

t_dd_dmatmp: Make "count" actually be the count

The value passed in count previously was "vertex after the last vertex
to be processed."  Calling that "count" was misleading and kind of mean.
Looking at the code, many functions immediately do "count-start" to get
back the true count.  That's just silly.

If it is better for the loops to be 'for (j = start; j < (start +
count); j++)', GCC will do that transformation.

NOTE: There is some strange formatting left by this patch.  That was
done to make it more obvious that the before and after code is
equivalent.  These will be fixed in the next patch.

No piglit regressions on i915 (G33) or radeon (Radeon 7500).

v2: Fix a remaining (count-start) in render_quad_strip_verts.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> [v1]
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

i965/vec4: Don't coalesce regs in Gen6 MATH ops if reswizzle/writemask needed

Gen6 MATH instructions can not execute in align16 mode, so swizzles or
writemasking are not allowed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92033
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Fix GL_FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE for default framebuffer.

From section 9.2. Binding and Managing Framebuffer Objects:

"Upon successful return from Get*FramebufferAttachmentParameteriv, if
pname is FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE, then params will contain
one of NONE, FRAMEBUFFER_DEFAULT, TEXTURE, or RENDERBUFFER, identifying
the type of object which contains the attached image."

And then it clarifies further:

"If the value of FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE is NONE, then
either no framebuffer is bound to target; or the default framebuffer is
bound, attachment is DEPTH or STENCIL, and the number of depth or stencil
bits, respectively, is zero"

Currently, if the default framebuffer is bound, we always return
GL_FRAMEBUFFER_DEFAULT for FRAMEBUFFER_ATTACHMENT_OBJECT_TYPE, but
according to the spec, when GL_DEPTH or GL_STENCIL attachments are
the ones being queried, we should return GL_NONE if they don't exist.

Fixes the following dEQP test:
dEQP-GLES3.functional.state_query.fbo.framebuffer_attachment_x_size_initial

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.6" <mesa-stable@lists.freedesktop.org>

glsl: bail out early in _mesa_ShaderSource if no shaderobj

Patch fixes a crash in conformance test that tries out different
invalid arguments for glShaderSource and glGetShaderSource:

   ES2-CTS.gtf.GL.glGetShaderSource.getshadersource_programhandle

This is a regression from commit:
   04e201d0c02cd30ace5c6fe80e9f021ebb733682

Additions in v2 also fix following failing deqp test:
   dEQP-GLES[2|3].functional.negative_api.shader.shader_source

v2: cleanup function, do check earlier (Iago Toral)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

i965/vec4: Detect and delete useless MOVs.

With NIR:

instructions in affected programs:     111508 -> 109193 (-2.08%)
helped:                                507

Without NIR:

instructions in affected programs:     28763 -> 28474 (-1.00%)
helped:                                186

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

prog_to_nir: Use nir_op_dph

Shader-db results on HSW:

   instructions in affected programs:     72 -> 56 (-22.22%)

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/lower_alu_to_scalar: Add support for nir_op_fdph

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/vec4: Add support for fdph_replicated

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Add fdph and fdph_replicated opcodes

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/lower_alu_to_scalar: Return after lower_reduction

We don't use any of the code after the switch anyway.  Since we check for
num_components == 1 and early-return, it doesn't get executed so
everything's ok.  However, it makes it much clearer what's going on if we
simply do an early return.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/lower_alu_to_scalar: Use the builder

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add defines for tessellation stages

v2 (Ken):
- Squash together commits for HS, DS, and TE, as well as fixes.
- Add INTEL_MASK variants so we can use SET_FIELD if we want.
- Rename GEN7_HS_INSTANCE_CONTROL to GEN7_HS_INSTANCE_COUNT to match
  the documentation.
- Add some more fields from the PRMs.
- Add Broadwell variants.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

r600g: update num_dw in scissor_enable workaround

"r600g: apply disable workaround on all scissors" forgot to update
num_dw, fix it.

Fixes: fbb423b433 "r600g: apply disable workaround on all scissors"
Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/vec4: refactor brw_vec4_copy_propagation.

Now it is more similar to brw_fs_copy_propagation, with three
clear stages:

1) Build up the value we are propagating as if it were the source of a
single MOV:
2) Check that we can propagate that value
3) Build the final value

Previously everything was somewhat messed up, making the
implementation on some specific cases, like knowing if you can
propagate from a previous instruction even with type mismatches, even
messier (for example, with the need of maintaining more of one
has_source_modifiers). The refactoring clears stuff, and gives
support to this mentioned use case without doing anything extra
(for example, only one has_source_modifiers is used).

Shader-db results for vec4 programs on Haswell:
total instructions in shared programs: 1683842 -> 1669037 (-0.88%)
instructions in affected programs:     739837 -> 725032 (-2.00%)
helped:                                6237
HURT:                                  0

v2: using 'arg' index to get the from inst was wrong
v3: rebased against last change on the previous patch of the series
v4: don't need to track instructions on struct copy_entry, as we
    only set the source on a direct copy
v5: change the approach for a refactoring
v6: tweaked comments

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

st/mesa: remove st_bind_framebuffer()

The function was a no-op and if the ctx->Driver.BindFramebuffer pointer
is null, Mesa won't try to use it.

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: const-qualify _mesa_is_legal_tex_storage_format ctx param

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: const-qualify _mesa_base_tex_format() ctx param

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: const-qualify buffer_object_subdata_range_good() bufObj parameter

Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: whitespace, comment fixes in texstorage.c

mesa/es3.1: Enable GL_ARB_vertex_attrib_binding functionality for GLES 3.1

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>

mesa/es3.1: Allow query of Vertex bindings for GLES 3.1

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>

mesa/es3.1 : Align OpenGL ES 3.1 glBindVertexBuffer error handling with OpenGL Core

According to OpenGL ES 3.1 specification 10.3.1:
"An INVALID_OPERATION error is generated if buffer is not zero
or a name returned from a previous call to GenBuffers,
or if such a name has since been deleted with DeleteBuffers."
This error check was previously limited to OpenGL Core.

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>

i965: fix textureGrad for cubemaps

Fixes bugs exposed by commit
2b1cdb0eddb73f62e4848d4b64840067f1f70865 in:
   ES3-CTS.gtf.GL3Tests.shadow.shadow_execution_frag

No regressions observed in deqp, CTS or Piglit.

v2: address review feedback from Iago Toral:
   - move rho calculation to else branch
   - optimize dx and dy calculation
   - fix documentation inconsistensies

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91114
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

nir: Report progress from nir_normalize_cubemap_coords().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Add braces around multi-line loop.

This was correct but not our usual style.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from nir_lower_system_values().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from nir_split_var_copies().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from nir_lower_locals_to_regs().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from nir_remove_dead_variables().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from lower_vec_to_movs().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Report progress from nir_lower_globals_vars_to_local().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: Clean up GLSL compiler option setup

The only functional change here is that we now set EmitNoIndirectOutput and
EmitNoIndirectTemp for compute shaders.  Compute shaders don't have outputs
per-se and we should have been setting EmitNoIndirectTemp all along.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure.ac: Add support to enable read-only text segment on x86.

Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.gentoo.org/240956
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965/skl: Use larger URB size where available.

All SKL SKUs except the lowest one which has half the L3 size actually have 384K
of URB per slice.

For once, I can explain how this mistake was made and how it was missed in
review...  Historically when we enable a platform and put the production sizes,
you can simply look at the "smallest" SKU and see what its URB size is (and we
assumed it was the 1 slice variant). Since on newer platforms the URB sizes are
scaled automatically by HW, this was sufficient. On SKL, this is a bit different
as the lowest SKU actually has half of the L3 fused off. GT2 is the 1 slice (not
GT1) variant and it has 384K.

There are no Jenkins tests fixed (or regressions) and we don't expect any fixes
here because you can always run with less URB size.

Thanks to Sarah for bringing this to my attention.

Cc: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

nir/builder: Don't use designated initializers

Designated initializers are not allowed in C++ (not even C++11).  Since
nir_lower_samplers is now using nir_builder, and nir_lower_samplers is in
C++, this breaks the build on some compilers.  Aparently, GCC 5 allows it
in some limited extent because mesa still builds on my system without this
patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92052
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Move system value -> intrinsic mapping into nir.c

This way they're right next to the map going the other direction.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: rename nir_lower_samplers.c{pp,}

With the only C++ function having its own wrapper we can 'demote' this
file to a normal C one. This allows us to get rid of extern C { #include
<foo.h> } 'hacks'. Plus some of the headers may use C99 initializers,
which are not supported by the ISO standard.

This may cause build issue on incremental builds. If so run the
following:

sed -i -e 's|samplers\.cpp|samplers.c|' src/glsl/nir/.deps/nir_lower_samplers.Plo

Fixes: ef8eebc6ad5(nir: support indirect indexing samplers in struct arrays)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: Gottfried Haider <gottfried.haider@gmail.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>

nir: add C wrapper around glsl_type::record_location_offset

This will allow us to convert nir_lower_sampler.cpp to C.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>

nir: move stdio.h inclusion before extern C

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>

i965: Fix MRF register number assertions for compr4.

compr4 is represented by setting the high bit on the MRF number.
We need to mask it out before sanity checking the register number.

Fixes ~8000 assert fails on Ironlake and G45.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92066
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

radeonsi: implement TXQS support

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Fredrik Bruhn <f@unibap.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: load fmask ptr relative to the resources array

res_ptr already contains the resource values. fmask_ptr needs to be
looked up relative to the start of the resource params.

Note that this only affects indirect loads of MS sampler arrays.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>

i965/vec4: Use MRF registers 21-23 for spilling in gen6

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Use MRF registers 21-23 for spilling in gen6

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Turn BRW_MAX_MRF into a macro that accepts a hardware generation

There are some bug reports about shaders failing to compile in gen6
because MRF 14 is used when we need to spill. For example:
https://bugs.freedesktop.org/show_bug.cgi?id=86469
https://bugs.freedesktop.org/show_bug.cgi?id=90631

Discussion in bugzilla pointed to the fact that gen6 might actually have
24 MRF registers available instead of 16, so we could use other MRF
registers and avoid these conflicts (we still need to investigate why
some shaders need up to MRF 14 anyway, since this is not expected).

Notice that the hardware docs are not clear about this fact:

SNB PRM Vol4 Part2's "Table 5-4. MRF Registers Available in Device
Hardware" says "Number per Thread" - "24 registers"

However, SNB PRM Vol4 Part1, 1.6.1 Message Register File (MRF) says:

"Normal threads should construct their messages in m1..m15. (...)
Regardless of actual hardware implementation, the thread should
not assume th at MRF addresses above m15 wrap to legal MRF registers."

Therefore experimentation was necessary to evaluate if we had these extra
MRF registers available or not. This was tested in gen6 using MRF
registers 21..23 for spilling and doing a full piglit run (all.py) forcing
spilling of everything on the FS backend. It was also tested by doing
spilling of everything on both the FS and the VS backends with a piglit run
of shader.py. In both cases no regressions were observed. In fact, many of
these tests where helped in the cases where we forced spilling, since that
triggered the same underlying problem described in the bug reports. Here are
some results using INTEL_DEBUG=spill_fs,spill_vec4 for a shader.py run on
gen6 hardware:

Using MRFs 13..15 for spilling:
crash: 2, fail: 113, pass: 6621, skip: 5461

Using MRFs 21..23 for spilling:
crash: 2, fail: 12, pass: 6722, skip: 5461

This patch sets the ground for later patches to implement spilling
using MRF registers 21..23 in gen6.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move MRF register asserts out of brw_reg.h

In a later patch we will make BRW_MAX_MRF return a different value depending
on the hardware generation, but it is inconvenient to add a gen parameter
to the brw_reg functions only for the assertions, so move these to places where
we have the hardware generation available.

Ken suggested to add the asserts to brw_set_src0 and brw_set_dest since that
would make sure that we catch all uses of MRF registers, even those coming
from modules that generate native code directly, like blorp. Unfortunately,
this is very late in the process which can make things harder to debug, so add
asserts to the generator as well.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Maximum allowed size of SEND messages is 15 (4 bits)

Until now we only used MRFs 1..15 for regular SEND messages, so the
message length could not possibly exceed the maximum size. Soon we'll
allow to use MRF registers 1..23 in gen6, so we need to be careful
not to build messages that can go beyond the limit. That could occur,
specifically, when building URB write messages, which we may need to
split in chunks due to their size. Previously we would simply go and
create a new message when we reached MRF 13 (since 13..15 were
reserved for spilling), now we also want to check the size of the
message explicitly.

Besides adding that condition to split URB write messages properly,
this patch also adds asserts in the generator. Notice that
brw_inst_set_mlen already asserts for this, but asserting in the
generators is easy and can make debugging easier in some cases.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/print: fix coverity error

Not something actually hit in real life (now state is never non-null,
but only case state->syms is null is if nir_print_instr() path).  But it
was something I overlooked the first time, so might as well fix it.

    *** CID 1324642:  Null pointer dereferences  (REVERSE_INULL)
    /src/glsl/nir/nir_print.c: 299 in print_var_decl()
    293
    294           fprintf(fp, " (%s, %u)", loc, var->data.driver_location);
    295        }
    296
    297        fprintf(fp, "\n");
    298
    >>>     CID 1324642:  Null pointer dereferences  (REVERSE_INULL)
    >>>     Null-checking "state" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
    299        if (state) {
    300           _mesa_set_add(state->syms, name);
    301           _mesa_hash_table_insert(state->ht, var, name);
    302        }
    303     }
    304

Signed-off-by: Rob Clark <robclark@freedesktop.org>

i965/vec4/nir: Remove all "this->" snippets

For consistency, either we have all class members dereferenced, or none.
In this case, very few are so lets get rid of them all.

Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

dri/common: fix gbm-symbols-check regression

Broken by commit c228514c72cb2fd5fb9e510808e29204fc9e7ae1
"dri/common: use sysconfdir when looking for drirc".

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92054
Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>

docs: add news item and link release notes for 10.6.8

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

docs: add sha256 checksums for 10.6.8

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 02387926addc62198c9b684f4f51f7cbe06b3e25)

docs: add release notes for 10.6.8

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 91c6302734574e91424a7ccb52b6368b712366cc)

mesa/teximage: reuse compressed format utility functions for base_format

Reuse utility functions instead of reimplementing the same logic.

* _mesa_is_compressed_format() performs the required checking to
  determine format support in the current context.
* _mesa_gl_compressed_format_base_format() returns the base format.

As a side effect, we now check that we're in a desktop context when
determining support for the FXT1 and RGTC formats. This is in agreement
with our extension table and the glext headers.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/texcompress: add compressed formats to base format utility function

Add S3TC and PALETTE formats.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/glformats: refactor compressed format support function

Instead of case statements, use _mesa_get_format_layout() to
determine if a GL format is part of a family of compressed formats.

v2. restrict LATC formats to API_OPENGL_COMPAT (Ilia).
    rename the variable mFormat to m_format.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/formats: add MESA_LAYOUT_LATC

This enables us to predicate statments on a compressed format being
a type of LATC format. Also, remove the comment that lists the enum
(it was getting a tad long).

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

dri/common: use sysconfdir when looking for drirc

Useful when locally installed mesa has more quirks than the system one.

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>