turnip: Add todo for d24_s8 copies

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: Disallow NPoT formats.

Copying is a mess for these formats for now.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: Always use UINT formats for copies.

Looks like r16_unorm might have precision issues.

dEQP-VK.api.copy_and_blit.core.image_to_image.all_formats.color.r16_unorm.r16_unorm.general_general

fails, but the dumped images in the xml are the same so
I'd guess the low bits are the issue.

r8_unorm and r16_uint work.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

turnip: Add image->image blitting.

3D blits & format reinterpretation are still TBD.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

aco: don't remove the loop exec mask in transition_to_Exact()

No pipeline-db changes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: set loop_info::has_discard for demotes

We need the loop header phis for the outer exec masks. Needed for
dEQP-VK.glsl.demote.dynamic_loop_texture

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

iris: Only resolve for image levels/layers which are actually in use.

There's no need to resolve everything.

lima/ppir: add NIR pass to split varying loads

NIR may emit a single instrinsic to load several packed varyings,
but that's suboptimal for Utgard PP for several reasons:
- varyings that are used as sampler inputs can be passed using
  pipeline register with increased precision
- we have small number of regs, so using a vec4 regs for storing
  two vec2 varyings increases reg pressure.

Add NIR pass to split a single load into several loads and utilize
it in lima.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

radv: Fix L2 cache rinse programming.

According to radeonsi, GLM doesn't support WB alone, so
we have to set INV too when WB is set.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

turnip: emit texture and uniform state

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: add some shader information in pipeline state

This information is needed by texture/uniform descriptors.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: use nir_opt_copy_prop_vars

Avoids getting a "load_output" in a case like this:

   gl_Position = ubuf.MVP * ubuf.position[gl_VertexIndex];
   frag_pos = gl_Position.xyz;

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: lower samplers and uniform buffer indices

Lower these to something compatible with ir3, and save the descriptor set
and binding information.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: basic descriptor sets (uniform buffer and samplers)

Mostly copy-paste from radv, with a few modifications.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: enable linear filtering

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: align layer_size

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: use linear tiling for scanout image

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: implement image view descriptor

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: implement sampler state

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: fix vertex_id

ir3 uses non-zero based vertex id for a6xx

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

turnip: emit shader immediates

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Eric Anholt <eric@anholt.net>

util/rb_tree: Stop relying on &iter->field != NULL

The old version of the iterators relies on a &iter->field != NULL check
which works fine on older GCC but newer GCC versions and clang have
optimizations that break if you do pointer math on a null pointer.  The
correct solution to this is to do the null comparisons before we do any
sort of &iter->field or use rb_node_data to do the reverse operation.

Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

util/rb_tree: Also test _safe iterators

Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

freedreno/a3xx: Mostly fix min-vs-mag filtering decisions on non-mipmap tex.

This is based on the fix I used for the same problem on V3D.  In this
case, it fixes all but the the
dEQP-GLES2.functional.texture.filtering.2d.*_npot cases of
dEQP-GLES2.functional.texture.filtering.2d.*'s failures.

Acked-by: Rob Clark <robdclark@chromium.org>

intel/compiler: avoid truncating int64_t to int

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Maya Rashish <maya@netbsd.org>

lima: support rectangle texture

As Vasily discovered, the bit 7 of the word 1 of the texture descriptor
is set when reloading the framebuffer, to use framebuffer-based offset
rather than normalized one. This bit also works for regular textures to
enable accessing with non-normalized offset.

Add support for rectangle texture by setting this bit for
PIPE_TEXTURE_RECT.

Suggested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>

loader: Avoid use-after-free / use of uninitialized local variables

Per the valgrind output below, we were returning the pointer to freed
memory if none of the later conditional pointer assignments were
executed. This caused dEQP CI jobs to crash on certain runners,
presumably due to a double-free down the line.

Also, we were skipping to the out: label before the vendor_id & chip_id
variables used by it were initialized, resulting in broken
LIBGL_DEBUG=verbose output such as

libGL: pci id for fd 4: 51108f00:51108f00, driver radeonsi

Fixes: 5a545e355b23 "loader: always map the "amdgpu" kernel driver name to radeonsi (v2)"
==403== Invalid read of size 1
==403==    at 0x4AFD576: surfaceless_probe_device (platform_surfaceless.c:316)
==403==    by 0x4AFD915: dri2_initialize_surfaceless (platform_surfaceless.c:391)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:984)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:958)
==403==    by 0x4AF1EEC: _eglMatchAndInitialize (egldriver.c:75)
==403==    by 0x4AF1F3B: _eglMatchDriver (egldriver.c:96)
==403==    by 0x4AE9367: eglInitialize (eglapi.c:617)
==403==    by 0x1D99C9: tcu::surfaceless::EglRenderContext::EglRenderContext(glu::RenderConfig const&, tcu::CommandLine const&) [clone .constprop.57] (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x1DABB0: tcu::surfaceless::ContextFactory::createContext(glu::RenderConfig const&, tcu::CommandLine const&, glu::RenderContext const*) const (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x53EBD1: glu::createRenderContext(tcu::Platform&, tcu::CommandLine const&, glu::RenderConfig const&, glu::RenderContext const*) (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x53EFE9: glu::createDefaultRenderContext(tcu::Platform&, tcu::CommandLine const&, glu::ApiType) (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x1DE07A: deqp::gles2::Context::Context(tcu::TestContext&) (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x1DB5EF: deqp::gles2::TestPackage::init() (in /deqp/modules/gles2/deqp-gles2)
==403==  Address 0x56bd340 is 0 bytes inside a block of size 4 free'd
==403==    at 0x48369AB: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==403==    by 0x4B01767: loader_get_driver_for_fd (loader.c:464)
==403==    by 0x4AFD553: surfaceless_probe_device (platform_surfaceless.c:308)
==403==    by 0x4AFD915: dri2_initialize_surfaceless (platform_surfaceless.c:391)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:984)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:958)
==403==    by 0x4AF1EEC: _eglMatchAndInitialize (egldriver.c:75)
==403==    by 0x4AF1F3B: _eglMatchDriver (egldriver.c:96)
==403==    by 0x4AE9367: eglInitialize (eglapi.c:617)
==403==    by 0x1D99C9: tcu::surfaceless::EglRenderContext::EglRenderContext(glu::RenderConfig const&, tcu::CommandLine const&) [clone .constprop.57] (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x1DABB0: tcu::surfaceless::ContextFactory::createContext(glu::RenderConfig const&, tcu::CommandLine const&, glu::RenderContext const*) const (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x53EBD1: glu::createRenderContext(tcu::Platform&, tcu::CommandLine const&, glu::RenderConfig const&, glu::RenderContext const*) (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x53EFE9: glu::createDefaultRenderContext(tcu::Platform&, tcu::CommandLine const&, glu::ApiType) (in /deqp/modules/gles2/deqp-gles2)
==403==  Block was alloc'd at
==403==    at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==403==    by 0x4EE5E09: strndup (strndup.c:43)
==403==    by 0x4B010B1: loader_get_kernel_driver_name (loader.c:101)
==403==    by 0x4B016AF: loader_get_driver_for_fd (loader.c:462)
==403==    by 0x4AFD553: surfaceless_probe_device (platform_surfaceless.c:308)
==403==    by 0x4AFD915: dri2_initialize_surfaceless (platform_surfaceless.c:391)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:984)
==403==    by 0x4AF5EEA: dri2_initialize (egl_dri2.c:958)
==403==    by 0x4AF1EEC: _eglMatchAndInitialize (egldriver.c:75)
==403==    by 0x4AF1F3B: _eglMatchDriver (egldriver.c:96)
==403==    by 0x4AE9367: eglInitialize (eglapi.c:617)
==403==    by 0x1D99C9: tcu::surfaceless::EglRenderContext::EglRenderContext(glu::RenderConfig const&, tcu::CommandLine const&) [clone .constprop.57] (in /deqp/modules/gles2/deqp-gles2)
==403==    by 0x1DABB0: tcu::surfaceless::ContextFactory::createContext(glu::RenderConfig const&, tcu::CommandLine const&, glu::RenderContext const*) const (in /deqp/modules/gles2/deqp-gles2)

Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

Revert "glx: Lift sending the MakeCurrent request to top-level code"

Apparently this provokes crashes elsewhere in code unrelated to
MakeCurrent. I hate GLX so very very much.

This reverts commit 999c2aed8826f403b071f52b040ce25b56d35f9d.

Gitlab: https://gitlab.freedesktop.org/mesa/mesa/issues/1207

Revert "glx: Implement GLX_EXT_no_config_context"

This reverts commit 0d635ccc912d7122f35f81eec27d8b2c0a2a7a28.

Gitlab: https://gitlab.freedesktop.org/mesa/mesa/issues/1207

radv: Add debug option to dump meta shaders.

This new option can help debug shader compiler problems when
there are issues with the meta shaders.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd/common: Introduce ac_get_fs_input_vgpr_cnt.

Add a function called ac_get_fs_input_vgpr_cnt which will return
the number of input VGPRs used by an AMD shader. Previously,
radv and radeonsi had the same code duplicated, but this commit also
allows them to share this code.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv: Set shared VGPR count in radv_postprocess_config.

This commit allows RADV to set the shared VGPR count according to
the shader config.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd/common: Add num_shared_vgprs to ac_shader_config for GFX10.

In GFX10 wave64 mode, shared VGPRs allow the two wave halves to
share some data with each other.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

amd/common: Extract some helper functions to ac_shader_util.

This commit moves ac_get_tbuffer_format, ac_get_sampler_dim and
ac_get_image_dim into ac_shader_util, thus enabling them to be used
by compilers other than LLVM.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

amd/common: Move ac_export_mrt_z to ac_llvm_build.

The aim of this commit is to keep ac_shader_util LLVM-free,
since we would like to use it in ACO later.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

aco: CSE readlane/readfirstlane/permute/reduce with the same exec mask

v2: rename pass_temp to pass_flags
v2: also CSE reductions
v3: add ds_swizzle_b32 support
v3: check gds/offset0/offset1 fields

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: don't CSE v_readlane_b32/v_readfirstlane_b32

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco,radv: rename record_llvm_ir/llvm_ir_string to record_ir/ir_string

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/aco: return a correct name and description for the backend IR

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: store printed backend IR in binary

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco,radv/aco: get dissassembly for release builds if requested

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/aco: actually disable ACO when unsupported

We were setting this twice. The second time, we weren't later disabling
it if unsupported.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

mesa/st: calculate texture size based on EGLImage miplevel

Fixes issues with 'egl-gl_oes_egl_image' Piglit test.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

meson: fix logic for generating .pc files with old glvnd

We want to generate PC files for non-glvnd builds and for builds with
old glvnd, but the current logic doesn't do that, it builds them
unconditionally, and for GLES it builds the shared libraries, which is
also not what we want. This does not generate .pc files for gles1 or
gles2. Which it we weren't doing before either, making this not a
regression but a return to status-quo.o

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1838
Fixes: 93df862b6affb6b8507e40601212a58012bfa873
       ("meson: re-add incorrect pkg-config files with GLVND for backward compatibility")
Reviewed-by: Matt Turner <mattst88@gmail.com>

nir/range-analysis: Use types to provide better ranges from bcsel and mov

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 16328255 -> 16315391 (-0.08%)
instructions in affected programs: 218318 -> 205454 (-5.89%)
helped: 988
HURT: 0
helped stats (abs) min: 1 max: 72 x̄: 13.02 x̃: 10
helped stats (rel) min: 0.33% max: 16.04% x̄: 6.27% x̃: 4.88%
95% mean confidence interval for instructions value: -13.69 -12.35
95% mean confidence interval for instructions %-change: -6.55% -5.99%
Instructions are helped.

total cycles in shared programs: 363683977 -> 363615417 (-0.02%)
cycles in affected programs: 1475193 -> 1406633 (-4.65%)
helped: 923
HURT: 36
helped stats (abs) min: 1 max: 624 x̄: 75.78 x̃: 48
helped stats (rel) min: 0.08% max: 13.89% x̄: 5.20% x̃: 5.08%
HURT stats (abs)   min: 1 max: 179 x̄: 38.58 x̃: 4
HURT stats (rel)   min: 0.06% max: 16.56% x̄: 3.33% x̃: 0.29%
95% mean confidence interval for cycles value: -75.88 -67.10
95% mean confidence interval for cycles %-change: -5.10% -4.66%
Cycles are helped.

Sandy Bridge
total instructions in shared programs: 10785779 -> 10785654 (<.01%)
instructions in affected programs: 13855 -> 13730 (-0.90%)
helped: 67
HURT: 0
helped stats (abs) min: 1 max: 15 x̄: 1.87 x̃: 1
helped stats (rel) min: 0.20% max: 3.45% x̄: 0.97% x̃: 0.78%
95% mean confidence interval for instructions value: -2.47 -1.26
95% mean confidence interval for instructions %-change: -1.13% -0.81%
Instructions are helped.

total cycles in shared programs: 153704799 -> 153704481 (<.01%)
cycles in affected programs: 101509 -> 101191 (-0.31%)
helped: 38
HURT: 13
helped stats (abs) min: 1 max: 38 x̄: 12.53 x̃: 16
helped stats (rel) min: 0.07% max: 2.69% x̄: 0.87% x̃: 0.53%
HURT stats (abs)   min: 1 max: 36 x̄: 12.15 x̃: 7
HURT stats (rel)   min: 0.06% max: 2.53% x̄: 0.73% x̃: 0.44%
95% mean confidence interval for cycles value: -10.24 -2.24
95% mean confidence interval for cycles %-change: -0.75% -0.17%
Cycles are helped.

LOST:   2
GAINED: 0

No shader-db change on Iron Lake or GM45.

nir/range-analysis: Use types in the hash key

This allows the reslut of mov and bcsel to be separately interpreted as
float or int depending on the use.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir/range-analysis: Bail if the types don't match

Some shaders are hurt by this change because now a
load_const(0x00000000) is not recognized as eq_zero when loaded as a
float.  This behavior is restored in a later patch (nir/range-analysis:
Use types to provide better ranges from bcsel and mov).

v2: Add a comment about reinterpretation of int/uint/bool.  Suggested by
Caio.  Rewrite condition the check for types being float versus checking
for types not being all the things that aren't float.

Fixes: 405de7ccb6c ("nir/range-analysis: Rudimentary value range analysis pass")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 16327543 -> 16328255 (<.01%)
instructions in affected programs: 55928 -> 56640 (1.27%)
helped: 0
HURT: 208
HURT stats (abs)   min: 1 max: 16 x̄: 3.42 x̃: 3
HURT stats (rel)   min: 0.33% max: 6.74% x̄: 1.31% x̃: 1.12%
95% mean confidence interval for instructions value: 3.06 3.79
95% mean confidence interval for instructions %-change: 1.17% 1.46%
Instructions are HURT.

total cycles in shared programs: 363682759 -> 363683977 (<.01%)
cycles in affected programs: 325758 -> 326976 (0.37%)
helped: 44
HURT: 133
helped stats (abs) min: 1 max: 179 x̄: 33.61 x̃: 5
helped stats (rel) min: 0.06% max: 14.21% x̄: 2.47% x̃: 0.29%
HURT stats (abs)   min: 1 max: 157 x̄: 20.28 x̃: 14
HURT stats (rel)   min: 0.07% max: 14.44% x̄: 1.42% x̃: 0.73%
95% mean confidence interval for cycles value: 0.38 13.39
95% mean confidence interval for cycles %-change: -0.06% 0.96%
Inconclusive result (%-change mean confidence interval includes 0).

Sandy Bridge
total instructions in shared programs: 10787433 -> 10787443 (<.01%)
instructions in affected programs: 1842 -> 1852 (0.54%)
helped: 0
HURT: 10
HURT stats (abs)   min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel)   min: 0.33% max: 1.85% x̄: 0.73% x̃: 0.49%
95% mean confidence interval for instructions value: 1.00 1.00
95% mean confidence interval for instructions %-change: 0.36% 1.10%
Instructions are HURT.

total cycles in shared programs: 153724543 -> 153724563 (<.01%)
cycles in affected programs: 8407 -> 8427 (0.24%)
helped: 1
HURT: 3
helped stats (abs) min: 18 max: 18 x̄: 18.00 x̃: 18
helped stats (rel) min: 0.98% max: 0.98% x̄: 0.98% x̃: 0.98%
HURT stats (abs)   min: 4 max: 18 x̄: 12.67 x̃: 16
HURT stats (rel)   min: 0.21% max: 0.75% x̄: 0.56% x̃: 0.72%
95% mean confidence interval for cycles value: -21.31 31.31
95% mean confidence interval for cycles %-change: -1.11% 1.46%
Inconclusive result (value mean confidence interval includes 0).

No shader-db changes on Iron Lake or GM45.

intel: Add new Comet Lake PCI-ids

Commit bfc4c359b282 ("drm/i915/cml: Add Missing PCI IDs") in i915
added 3 new CML PCI ids.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: use proper label for Comet Lake skus

Fixes: 82f6a746e8 ("intel: Add support for Comet Lake")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

freedreno/a6xx: Move instrlen and obj_start writes to fd6_emit_shader

Consolidate a few more generic shaders setup regs in fd6_emit_shader.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/a6xx: Emit const and texture state for HS/DS/GS

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/ir3: Add HS/DS/GS to shader key and cache

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/a6xx: Add generic program stateobj support for HS/DS/GS

This add generic stage state setup for HS/DS/GS to the program state
object.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno: Move fs functions after geometry pipeline stages

Let's try to always order the stages in the pipeline order.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno: Add state binding functions for HS/DS/GS

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno: Rename vp and fp to vs and fs in fd_program_stateobj

We're using vs and fs now, and adding hs, ds and gs soon.  It's
confusing enough that we have both DS/TCS and HS/TES. At least for VS
and FS there doesn't have to be multiple names.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

freedreno/a6xx: Factor out const state setup

We'll be sharing this logic for new shader stages soon.

Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>

glsl: turn runtime asserts of compile-time value into compile-time asserts

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>

docs/release-calendar: add missing <td> and </td>

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

docs/release-calendar: fix bugfix release numbers

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

anv: gem-stubs: return a valid fd got anv_gem_userptr()

Fixes invalid close(-1) in the unit tests.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

st/nine: Ignore D3DSIO_RET if it is the last instruction in a shader

RET as a last instruction could be safely ignored.
Remove it to prevent crashes/warnings in case underlying driver
doesn't implement arbitrary returns.

A better way would be to remove the RET after the whole shader
is parsed which will handle a possible case when the last RET is
followed by a comment.

CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Axel Davy <davyaxel0@gmail.com>

bin/get-pick-list: use --oneline=pretty instead of --oneline

--oneline shortens hashes, while --oneline=pretty doesn't, otherwise
they are the same. Having full hashes is convenient as that is the
format that the bin/.cherry-ignore script requires to work correctly.

Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>

release: Push 19.3 back two weeks

The main reason to do this is that 19.2 has slipped by two weeks, and
such the 19.3 branch is due to happen extremely close to the release of
19.2.0. I think it would be better to have a little more time between
releases for developers and for packagers.

This would still have the 19.3 release out before December, even if it
slips by 1 week.

Acked-By: Karol Herbst <kherbst@redhat.com>
Acked-by: Juan A. Suarez <jasuarez@igalia.com>

docs: update calendar, add news item, and link release notes for 19.2.0

docs: add SHA256 sum for 19.2.0

docs: Add release notes for 19.2.0

lima/ppir: Add various varying fetch sources to disassembler

Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

meson: re-add incorrect pkg-config files with GLVND for backward compatibility

This is a bit counter-intuitive, but the issue is that GLVND is broken
in versions <= 1.1.1, so we need to keep wrongly providing these files
to cover up their mistake, otherwise the rest of the world ends up
broken.

Suggested-by: Dylan Baker <dylan@pnwbakers.com>
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

aco: check for duplicate opcode numbers

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: fix opcode for s_mul_hi_i32

Fixes dEQP-VK.glsl.builtin.function.integer.imulextended.*_compute

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: fix v_subrev_co_u32_e64 opcode

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: fix GFX9 opcode for v_xad_u32

Fixes various dEQP-VK.image.store.* tests.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

aco: implement 64-bit ineg

We currently lower them, but nir_opt_algebraic() can add new ones because
lower_sub=true.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

aco: run nir_lower_int64() before nir_lower_idiv()

nir_lower_idiv() asserts on 64-bit integers.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>

nir: Fix overlapping vars in nir_assign_io_var_locations()

When handling two variables with overlapping locations, we process the
one with lower location first, and then extend the location ->
driver_location map to guarantee that it's contiguous for the second
variable too. But the loop had the wrong bound, so we weren't extending
the map 100%, which could lead to problems later such as an incorrect
num_inputs. The loop index i is an index into the slots of the variable,
so we need to stop at the final slot of the variable (var_size) instead
of the number of unassigned slots.

This fixes
spec@arb_enhanced_layouts@execution@component-layout@vs-fs-array-interleave-range
on radeonsi NIR.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

clover: eliminate "ignoring attributes on template argument" warning

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>

clover/codegen: remove unused get_symbol_offsets function

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>

clover/llvm: remove harmful std::move call

both clang and gcc warn with:
"moving a local object in a return statement prevents copy elision"

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>

iris: disable aux on first get_param if not created with aux

This moves the fix from commit 361f3d19f1f to happen in get_param
(used now instead of get_handle by st/dri). This fixes artifacts
seen with Xorg and CCS_E.

Fixes: fc12fd05f56 "iris: Implement pipe_screen::resource_get_param"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: correct bitcast-helpers

Without this, we'll incorrectly round off huge values to the nearest
representable double instead of keeping it at the exact value  as
we're supposed to.

Found by inspecting compiler-warnings.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 85faf5082f ("glsl: Add 64-bit integer support for constant expressions")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

lima/ppir: add support for indirect load of uniforms and varyings

Utgard PP supports indirect load of uniforms and varyings, so let's
enable it.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

lima/ppir: add node dependency types

Currently we add dependecies in 3 cases:
1) One node consumes value produced by another node
2) Sequency dependencies
3) Write after read dependencies

2) and 3) only affect scheduler decisions since we still can use pipeline
register if we have only 1 dependency of type 1).

Add 3 dependency types and mark dependencies as we add them.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

lima/ppir: don't attempt to clone tex coords if it's not varying

It makes no sense to clone texture coords if it's not varying, moreover
we don't support cloning ALU nodes.

Fixes: 1c1890fa7077 ("lima/ppir: clone uniforms and load_coords into each successor")
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

radeonsi/nir: lower load constants to scalar

We call nir_lower_load_const_to_scalar in the state trackers linker
however some later passes can reintroduce constant vectors. Here
we lower these to scalar and perform optimisations. The Intel
drivers do a similar call in their backend..

shader-db results VEGA 64:

Totals from affected shaders:
SGPRS: 152168 -> 151976 (-0.13 %)
VGPRS: 135224 -> 135112 (-0.08 %)
Spilled SGPRs: 4027 -> 4163 (3.38 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 10670028 -> 10654776 (-0.14 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 13122 -> 13135 (0.10 %)
Wait states: 0 -> 0 (0.00 %)

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

turnip: use image tile_mode for gmem configuration

Fixes at least this deqp test:
dEQP-VK.api.smoke.triangle

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

turnip: fix binning shader compilation

ir3 segfaults if nonbinning is NULL for the bininng pass shader.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir/opt_remove_phis: handle phis with no sources

This can happen with loops with unreachable exits which are later
optimized away.

Fixes assertion in dEQP-VK.graphicsfuzz.unreachable-loops with RADV.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeonsi: fix VAAPI segfault due to various bugs

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111236

gallium/vl: don't set PIPE_HANDLE_USAGE_EXPLICIT_FLUSH

because vl doesn't call flush_resource and I wasn't able to find
all places where flush_resource needs to be called.

This fixes corrupted / unflushed surfaces with fullscreen videos on Raven.

Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org>

radeonsi: initialize displayable DCC using the retile blit to prevent hangs

Cc 19.2 <mesa-stable@lists.freedesktop.org>

nir/opt_large_constants: Handle store writemasks

This fixes some piglit tests on radeonsi NIR where a varying is
initialized to a constant array in the vertex shader. Varying packing
after nir_lower_io_to_temporaries creates writemasked stores which
persist after pulling the constant initialization down into the fragment
shader.

While we're here, rewrite handle_constant_store() to do the loop over
components outside the switch, so that we don't have to duplicate the
writemask checking for every bitsize.

Fixes: 1235850522c ("nir: Add a large constants optimization pass")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

meson: split more compiler options to their own line

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

meson: drop -Wno-foo bug workaround for Meson < 0.46

This was a workaround for a bug in Meson that was fixed in 0.46 [1].

[1] https://github.com/mesonbuild/meson/pull/2284

Fixes: f7b6a8d12fdc446e3251 ("meson: bump required version to 0.46")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

radv: fix s/load/store/ copy-paste typo

Fixes: cdc6efddf918bc07d30d ("radv: implement all depth/stencil resolve modes using graphics")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nouveau: add idep_nir_headers as dep for libnouveau

Fixes a compilation error when building libnouveau:

In file included from ../src/gallium/drivers/nouveau/nv50/nv50_program.c:25:
../src/compiler/nir/nir.h:1115:10: fatal error: nir_intrinsics.h: No such file or directory
 #include "nir_intrinsics.h"
           ^~~~~~~~~~~~~~~~~~
           compilation terminated.

Fixes: f014ae3c7cce504afe5d ("nouveau: add support for nir")
Signed-off-by: Stephen Barber <smbarber@chromium.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>

radv: Add workaround for hang in The Surge 2.

Released today and hangs on RADV. We don't have the root cause yet,
but this should unblock people playing the game.

No drirc because the radv debugflags are not usable from drirc and
I want this backported.

CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>

i965/fs: set rounding mode when emitting the flrp instruction

flrp was forgotten when already adding the rounding mode for other
instructions.

Fixes: ba1e25e1aa6 ("i965/fs: set rounding mode when emitting fadd, fmul and ffma instructions")
Suggested-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

i965/fs: add a comment about how the rounding mode in fmul is set

After
1711bf6cf2d ("intel/fs: Generate better code for fsign multiplied by a value"),
the conflicts resolution for setting the rounding mode after the
fused fmul and fsign optimization is non obvious.

Basically, the optimization doesn't really result in a MUL, or any
other operation which would need to have the rounding mode set. Hence,
we set it just before the actual MUL in the treatment of fmul.

Fixes: ba1e25e1aa6 ("i965/fs: set rounding mode when emitting fadd, fmul and ffma instructions")
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

bin/get-pick-list.sh: sha1 commits can be smaller than 8 chars

The script only handles commits with "Fixes: <sha1>" where <sha1> is
equal or great than 8 chars. But <sha1> can be smaller, like 7 chars.

This commit relax the restriction to handle <sha1> 4 or more chars.

Fixes: 533fead4236 ("bin/get-pick-list.sh: tweak the commit sha matching pattern")
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>