-class FPNorm1Data:
-
- def __init__(self, width, id_wid):
- self.roundz = Signal(reset_less=True)
- self.z = FPNumBase(width, False)
- self.mid = Signal(id_wid, reset_less=True)
-
- def eq(self, i):
- return [self.z.eq(i.z), self.roundz.eq(i.roundz), self.mid.eq(i.mid)]
-
-
-class FPNorm1ModSingle:
-
- def __init__(self, width, id_wid):
- self.width = width
- self.id_wid = id_wid
- self.i = self.ispec()
- self.o = self.ospec()
-
- def ispec(self):
- return FPAddStage1Data(self.width, self.id_wid)
-
- def ospec(self):
- return FPNorm1Data(self.width, self.id_wid)
-
- def setup(self, m, in_z, in_of, out_z):
- """ links module to inputs and outputs
- """
- m.submodules.normalise_1 = self
-
- m.d.comb += self.i.z.eq(in_z)
- m.d.comb += self.i.of.eq(in_of)
-
- m.d.comb += out_z.eq(self.o.z)
-
- def elaborate(self, platform):
- m = Module()
-
- mwid = self.o.z.m_width+2
- pe = PriorityEncoder(mwid)
- m.submodules.norm_pe = pe
-
- of = Overflow()
- m.d.comb += self.o.roundz.eq(of.roundz)
-
- m.submodules.norm1_out_z = self.o.z
- m.submodules.norm1_out_overflow = of
- m.submodules.norm1_in_z = self.i.z
- m.submodules.norm1_in_overflow = self.i.of
-
- i = self.ispec()
- m.submodules.norm1_insel_z = i.z
- m.submodules.norm1_insel_overflow = i.of
-
- espec = (len(i.z.e), True)
- ediff_n126 = Signal(espec, reset_less=True)
- msr = MultiShiftRMerge(mwid, espec)
- m.submodules.multishift_r = msr
-
- m.d.comb += i.eq(self.i)
- # initialise out from in (overridden below)
- m.d.comb += self.o.z.eq(i.z)
- m.d.comb += of.eq(i.of)
- # normalisation increase/decrease conditions
- decrease = Signal(reset_less=True)
- increase = Signal(reset_less=True)
- m.d.comb += decrease.eq(i.z.m_msbzero & i.z.exp_gt_n126)
- m.d.comb += increase.eq(i.z.exp_lt_n126)
- # decrease exponent
- with m.If(decrease):
- # *sigh* not entirely obvious: count leading zeros (clz)
- # with a PriorityEncoder: to find from the MSB
- # we reverse the order of the bits.
- temp_m = Signal(mwid, reset_less=True)
- temp_s = Signal(mwid+1, reset_less=True)
- clz = Signal((len(i.z.e), True), reset_less=True)
- # make sure that the amount to decrease by does NOT
- # go below the minimum non-INF/NaN exponent
- limclz = Mux(i.z.exp_sub_n126 > pe.o, pe.o,
- i.z.exp_sub_n126)
- m.d.comb += [
- # cat round and guard bits back into the mantissa
- temp_m.eq(Cat(i.of.round_bit, i.of.guard, i.z.m)),
- pe.i.eq(temp_m[::-1]), # inverted
- clz.eq(limclz), # count zeros from MSB down
- temp_s.eq(temp_m << clz), # shift mantissa UP
- self.o.z.e.eq(i.z.e - clz), # DECREASE exponent
- self.o.z.m.eq(temp_s[2:]), # exclude bits 0&1
- of.m0.eq(temp_s[2]), # copy of mantissa[0]
- # overflow in bits 0..1: got shifted too (leave sticky)
- of.guard.eq(temp_s[1]), # guard
- of.round_bit.eq(temp_s[0]), # round
- ]
- # increase exponent
- with m.Elif(increase):
- temp_m = Signal(mwid+1, reset_less=True)
- m.d.comb += [
- temp_m.eq(Cat(i.of.sticky, i.of.round_bit, i.of.guard,
- i.z.m)),
- ediff_n126.eq(i.z.N126 - i.z.e),
- # connect multi-shifter to inp/out mantissa (and ediff)
- msr.inp.eq(temp_m),
- msr.diff.eq(ediff_n126),
- self.o.z.m.eq(msr.m[3:]),
- of.m0.eq(temp_s[3]), # copy of mantissa[0]
- # overflow in bits 0..1: got shifted too (leave sticky)
- of.guard.eq(temp_s[2]), # guard
- of.round_bit.eq(temp_s[1]), # round
- of.sticky.eq(temp_s[0]), # sticky
- self.o.z.e.eq(i.z.e + ediff_n126),
- ]
-
- return m
-
-
-class FPNorm1ModMulti:
-
- def __init__(self, width, single_cycle=True):
- self.width = width
- self.in_select = Signal(reset_less=True)
- self.in_z = FPNumBase(width, False)
- self.in_of = Overflow()
- self.temp_z = FPNumBase(width, False)
- self.temp_of = Overflow()
- self.out_z = FPNumBase(width, False)
- self.out_of = Overflow()
-
- def elaborate(self, platform):
- m = Module()
-
- m.submodules.norm1_out_z = self.out_z
- m.submodules.norm1_out_overflow = self.out_of
- m.submodules.norm1_temp_z = self.temp_z
- m.submodules.norm1_temp_of = self.temp_of
- m.submodules.norm1_in_z = self.in_z
- m.submodules.norm1_in_overflow = self.in_of
-
- in_z = FPNumBase(self.width, False)
- in_of = Overflow()
- m.submodules.norm1_insel_z = in_z
- m.submodules.norm1_insel_overflow = in_of
-
- # select which of temp or in z/of to use
- with m.If(self.in_select):
- m.d.comb += in_z.eq(self.in_z)
- m.d.comb += in_of.eq(self.in_of)
- with m.Else():
- m.d.comb += in_z.eq(self.temp_z)
- m.d.comb += in_of.eq(self.temp_of)
- # initialise out from in (overridden below)
- m.d.comb += self.out_z.eq(in_z)
- m.d.comb += self.out_of.eq(in_of)
- # normalisation increase/decrease conditions
- decrease = Signal(reset_less=True)
- increase = Signal(reset_less=True)
- m.d.comb += decrease.eq(in_z.m_msbzero & in_z.exp_gt_n126)
- m.d.comb += increase.eq(in_z.exp_lt_n126)
- m.d.comb += self.out_norm.eq(decrease | increase) # loop-end
- # decrease exponent
- with m.If(decrease):
- m.d.comb += [
- self.out_z.e.eq(in_z.e - 1), # DECREASE exponent
- self.out_z.m.eq(in_z.m << 1), # shift mantissa UP
- self.out_z.m[0].eq(in_of.guard), # steal guard (was tot[2])
- self.out_of.guard.eq(in_of.round_bit), # round (was tot[1])
- self.out_of.round_bit.eq(0), # reset round bit
- self.out_of.m0.eq(in_of.guard),
- ]
- # increase exponent
- with m.Elif(increase):
- m.d.comb += [
- self.out_z.e.eq(in_z.e + 1), # INCREASE exponent
- self.out_z.m.eq(in_z.m >> 1), # shift mantissa DOWN
- self.out_of.guard.eq(in_z.m[0]),
- self.out_of.m0.eq(in_z.m[1]),
- self.out_of.round_bit.eq(in_of.guard),
- self.out_of.sticky.eq(in_of.sticky | in_of.round_bit)
- ]
-
- return m
-
-
-class FPNorm1Single(FPState, FPID):
-
- def __init__(self, width, id_wid, single_cycle=True):
- FPID.__init__(self, id_wid)
- FPState.__init__(self, "normalise_1")
- self.mod = FPNorm1ModSingle(width)
- self.out_z = FPNumBase(width, False)
- self.out_roundz = Signal(reset_less=True)
-
- def setup(self, m, in_z, in_of, in_mid):
- """ links module to inputs and outputs
- """
- self.mod.setup(m, in_z, in_of, self.out_z)
-
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m)
- m.d.sync += self.out_roundz.eq(self.mod.out_of.roundz)
- m.next = "round"
-
-
-class FPNorm1Multi(FPState, FPID):
-
- def __init__(self, width, id_wid):
- FPID.__init__(self, id_wid)
- FPState.__init__(self, "normalise_1")
- self.mod = FPNorm1ModMulti(width)
- self.stb = Signal(reset_less=True)
- self.ack = Signal(reset=0, reset_less=True)
- self.out_norm = Signal(reset_less=True)
- self.in_accept = Signal(reset_less=True)
- self.temp_z = FPNumBase(width)
- self.temp_of = Overflow()
- self.out_z = FPNumBase(width)
- self.out_roundz = Signal(reset_less=True)
-
- def setup(self, m, in_z, in_of, norm_stb, in_mid):
- """ links module to inputs and outputs
- """
- self.mod.setup(m, in_z, in_of, norm_stb,
- self.in_accept, self.temp_z, self.temp_of,
- self.out_z, self.out_norm)
-
- m.d.comb += self.stb.eq(norm_stb)
- m.d.sync += self.ack.eq(0) # sets to zero when not in normalise_1 state
-
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m)
- m.d.comb += self.in_accept.eq((~self.ack) & (self.stb))
- m.d.sync += self.temp_of.eq(self.mod.out_of)
- m.d.sync += self.temp_z.eq(self.out_z)
- with m.If(self.out_norm):
- with m.If(self.in_accept):
- m.d.sync += [
- self.ack.eq(1),
- ]
- with m.Else():
- m.d.sync += self.ack.eq(0)
- with m.Else():
- # normalisation not required (or done).
- m.next = "round"
- m.d.sync += self.ack.eq(1)
- m.d.sync += self.out_roundz.eq(self.mod.out_of.roundz)
-
-
-class FPNormToPack(FPState, FPID):
-
- def __init__(self, width, id_wid):
- FPID.__init__(self, id_wid)
- FPState.__init__(self, "normalise_1")
- self.width = width
-
- def setup(self, m, in_z, in_of, in_mid):
- """ links module to inputs and outputs
- """
-
- # Normalisation (chained to input in_z+in_of)
- nmod = FPNorm1ModSingle(self.width, self.id_wid)
- n_out = nmod.ospec()
- nmod.setup(m, in_z, in_of, n_out.z)
- m.d.comb += n_out.roundz.eq(nmod.o.roundz)
-
- # Rounding (chained to normalisation)
- rmod = FPRoundMod(self.width, self.id_wid)
- r_out_z = rmod.ospec()
- rmod.setup(m, n_out.z, n_out.roundz)
- m.d.comb += r_out_z.eq(rmod.out_z)
-
- # Corrections (chained to rounding)
- cmod = FPCorrectionsMod(self.width, self.id_wid)
- c_out_z = cmod.ospec()
- cmod.setup(m, r_out_z)
- m.d.comb += c_out_z.eq(cmod.out_z)
-
- # Pack (chained to corrections)
- self.pmod = FPPackMod(self.width, self.id_wid)
- self.out_z = self.pmod.ospec()
- self.pmod.setup(m, c_out_z)
-
- # Multiplex ID
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m) # copies incoming ID to outgoing
- m.d.sync += self.out_z.z.v.eq(self.pmod.o.z.v) # outputs packed result
- m.next = "pack_put_z"
-
-
-class FPRoundData:
-
- def __init__(self, width, id_wid):
- self.z = FPNumBase(width, False)
- self.mid = Signal(id_wid, reset_less=True)
-
- def eq(self, i):
- return [self.z.eq(i.z), self.mid.eq(i.mid)]
-
-
-class FPRoundMod:
-
- def __init__(self, width, id_wid):
- self.width = width
- self.id_wid = id_wid
- self.i = self.ispec()
- self.out_z = self.ospec()
-
- def ispec(self):
- return FPNorm1Data(self.width, self.id_wid)
-
- def ospec(self):
- return FPRoundData(self.width, self.id_wid)
-
- def setup(self, m, in_z, roundz):
- m.submodules.roundz = self
-
- m.d.comb += self.i.z.eq(in_z)
- m.d.comb += self.i.roundz.eq(roundz)
-
- def elaborate(self, platform):
- m = Module()
- m.d.comb += self.out_z.eq(self.i)
- with m.If(self.i.roundz):
- m.d.comb += self.out_z.z.m.eq(self.i.z.m + 1) # mantissa rounds up
- with m.If(self.i.z.m == self.i.z.m1s): # all 1s
- m.d.comb += self.out_z.z.e.eq(self.i.z.e + 1) # exponent up
- return m
-
-
-class FPRound(FPState, FPID):
-
- def __init__(self, width, id_wid):
- FPState.__init__(self, "round")
- FPID.__init__(self, id_wid)
- self.mod = FPRoundMod(width)
- self.out_z = self.mod.ospec()
-
- def setup(self, m, in_z, roundz, in_mid):
- """ links module to inputs and outputs
- """
- self.mod.setup(m, in_z, roundz)
-
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m)
- m.d.sync += self.out_z.eq(self.mod.out_z)
- m.next = "corrections"
-
-
-class FPCorrectionsMod:
-
- def __init__(self, width, id_wid):
- self.width = width
- self.id_wid = id_wid
- self.in_z = self.ispec()
- self.out_z = self.ospec()
-
- def ispec(self):
- return FPRoundData(self.width, self.id_wid)
-
- def ospec(self):
- return FPRoundData(self.width, self.id_wid)
-
- def setup(self, m, in_z):
- """ links module to inputs and outputs
- """
- m.submodules.corrections = self
- m.d.comb += self.in_z.eq(in_z)
-
- def elaborate(self, platform):
- m = Module()
- m.submodules.corr_in_z = self.in_z.z
- m.submodules.corr_out_z = self.out_z.z
- m.d.comb += self.out_z.eq(self.in_z)
- with m.If(self.in_z.z.is_denormalised):
- m.d.comb += self.out_z.z.e.eq(self.in_z.z.N127)
- return m
-
-
-class FPCorrections(FPState, FPID):
-
- def __init__(self, width, id_wid):
- FPState.__init__(self, "corrections")
- FPID.__init__(self, id_wid)
- self.mod = FPCorrectionsMod(width)
- self.out_z = self.mod.ospec()
-
- def setup(self, m, in_z, in_mid):
- """ links module to inputs and outputs
- """
- self.mod.setup(m, in_z)
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m)
- m.d.sync += self.out_z.eq(self.mod.out_z)
- m.next = "pack"
-
-
-class FPPackData:
-
- def __init__(self, width, id_wid):
- self.z = FPNumOut(width, False)
- self.mid = Signal(id_wid, reset_less=True)
-
- def eq(self, i):
- return [self.z.eq(i.z), self.mid.eq(i.mid)]
-
-
-class FPPackMod:
-
- def __init__(self, width, id_wid):
- self.width = width
- self.id_wid = id_wid
- self.i = self.ispec()
- self.o = self.ospec()
-
- def ispec(self):
- return FPRoundData(self.width, self.id_wid)
-
- def ospec(self):
- return FPPackData(self.width, self.id_wid)
-
- def setup(self, m, in_z):
- """ links module to inputs and outputs
- """
- m.submodules.pack = self
- m.d.comb += self.i.eq(in_z)
-
- def elaborate(self, platform):
- m = Module()
- m.submodules.pack_in_z = self.i.z
- with m.If(self.i.z.is_overflowed):
- m.d.comb += self.o.z.inf(self.i.z.s)
- with m.Else():
- m.d.comb += self.o.z.create(self.i.z.s, self.i.z.e, self.i.z.m)
- return m
-
-
-class FPPackData:
- def __init__(self, width, id_wid):
- self.z = FPNumOut(width, False)
- self.mid = Signal(id_wid, reset_less=True)
-
- def eq(self, i):
- return [self.z.eq(i.z), self.mid.eq(i.mid)]
-
-
-class FPPack(FPState, FPID):
-
- def __init__(self, width, id_wid):
- FPState.__init__(self, "pack")
- FPID.__init__(self, id_wid)
- self.mod = FPPackMod(width)
- self.out_z = self.ospec()
-
- def ispec(self):
- return self.mod.ispec()
-
- def ospec(self):
- return self.mod.ospec()
-
- def setup(self, m, in_z, in_mid):
- """ links module to inputs and outputs
- """
- self.mod.setup(m, in_z)
- if self.in_mid is not None:
- m.d.comb += self.in_mid.eq(in_mid)
-
- def action(self, m):
- self.idsync(m)
- m.d.sync += self.out_z.v.eq(self.mod.out_z.v)
- m.next = "pack_put_z"
-
-
-class FPPutZ(FPState):
-
- def __init__(self, state, in_z, out_z, in_mid, out_mid, to_state=None):
- FPState.__init__(self, state)
- if to_state is None:
- to_state = "get_ops"
- self.to_state = to_state
- self.in_z = in_z
- self.out_z = out_z
- self.in_mid = in_mid
- self.out_mid = out_mid
-
- def action(self, m):
- if self.in_mid is not None:
- m.d.sync += self.out_mid.eq(self.in_mid)
- m.d.sync += [
- self.out_z.v.eq(self.in_z.v)
- ]
- with m.If(self.out_z.stb & self.out_z.ack):
- m.d.sync += self.out_z.stb.eq(0)
- m.next = self.to_state
- with m.Else():
- m.d.sync += self.out_z.stb.eq(1)
-
-
-class FPPutZIdx(FPState):
-
- def __init__(self, state, in_z, out_zs, in_mid, to_state=None):
- FPState.__init__(self, state)
- if to_state is None:
- to_state = "get_ops"
- self.to_state = to_state
- self.in_z = in_z
- self.out_zs = out_zs
- self.in_mid = in_mid
projects / ieee754fpu.git / blobdiff