"""
setattr(m.submodules, self.state_from, self.mod)
m.d.comb += self.mod.in_op.eq(in_op)
- #m.d.comb += self.out_op.eq(self.mod.out_op)
m.d.comb += self.out_decode.eq(self.mod.out_decode)
def action(self, m):
class FPGet2OpMod(Trigger):
- def __init__(self, width):
+ def __init__(self, width, id_wid):
Trigger.__init__(self)
- self.in_op1 = Signal(width, reset_less=True)
- self.in_op2 = Signal(width, reset_less=True)
- self.out_op1 = FPNumIn(None, width)
- self.out_op2 = FPNumIn(None, width)
+ self.width = width
+ self.id_wid = id_wid
+ self.i = self.ispec()
+ self.o = self.ospec()
+
+ def ispec(self):
+ return FPADDBaseData(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPNumBase2Ops(self.width, self.id_wid)
def elaborate(self, platform):
m = Trigger.elaborate(self, platform)
- #m.submodules.get_op_in = self.in_op
- m.submodules.get_op1_out = self.out_op1
- m.submodules.get_op2_out = self.out_op2
+ m.submodules.get_op1_out = self.o.a
+ m.submodules.get_op2_out = self.o.b
+ out_op1 = FPNumIn(None, self.width)
+ out_op2 = FPNumIn(None, self.width)
with m.If(self.trigger):
m.d.comb += [
- self.out_op1.decode(self.in_op1),
- self.out_op2.decode(self.in_op2),
+ out_op1.decode(self.i.a),
+ out_op2.decode(self.i.b),
+ self.o.a.eq(out_op1),
+ self.o.b.eq(out_op2),
]
return m
""" gets operands
"""
- def __init__(self, in_state, out_state, in_op1, in_op2, width):
+ def __init__(self, in_state, out_state, width, id_wid):
FPState.__init__(self, in_state)
self.out_state = out_state
- self.mod = FPGet2OpMod(width)
- self.in_op1 = in_op1
- self.in_op2 = in_op2
- self.out_op1 = FPNumIn(None, width)
- self.out_op2 = FPNumIn(None, width)
+ self.mod = FPGet2OpMod(width, id_wid)
+ self.o = self.mod.ospec()
self.in_stb = Signal(reset_less=True)
self.out_ack = Signal(reset_less=True)
self.out_decode = Signal(reset_less=True)
- def setup(self, m, in_op1, in_op2, in_stb, in_ack):
+ def setup(self, m, i, in_stb, in_ack):
""" links module to inputs and outputs
"""
m.submodules.get_ops = self.mod
- m.d.comb += self.mod.in_op1.eq(in_op1)
- m.d.comb += self.mod.in_op2.eq(in_op2)
+ m.d.comb += self.mod.i.eq(i)
m.d.comb += self.mod.stb.eq(in_stb)
m.d.comb += self.out_ack.eq(self.mod.ack)
m.d.comb += self.out_decode.eq(self.mod.trigger)
m.next = self.out_state
m.d.sync += [
self.mod.ack.eq(0),
- #self.out_op1.v.eq(self.mod.out_op1.v),
- #self.out_op2.v.eq(self.mod.out_op2.v),
- self.out_op1.eq(self.mod.out_op1),
- self.out_op2.eq(self.mod.out_op2)
+ self.o.eq(self.mod.o),
]
with m.Else():
m.d.sync += self.mod.ack.eq(1)
+
class FPNumBase2Ops:
- def __init__(self, width, m_extra=True):
+ def __init__(self, width, id_wid, m_extra=True):
self.a = FPNumBase(width, m_extra)
self.b = FPNumBase(width, m_extra)
+ self.mid = Signal(id_wid, reset_less=True)
def eq(self, i):
- return [self.a.eq(i.a), self.b.eq(i.b)]
+ return [self.a.eq(i.a), self.b.eq(i.b), self.mid.eq(i.mid)]
class FPAddSpecialCasesMod:
https://steve.hollasch.net/cgindex/coding/ieeefloat.html
"""
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
+ self.id_wid = id_wid
self.i = self.ispec()
- self.out_z = self.ospec()
+ self.o = self.ospec()
self.out_do_z = Signal(reset_less=True)
def ispec(self):
- return FPNumBase2Ops(self.width)
+ return FPNumBase2Ops(self.width, self.id_wid)
def ospec(self):
- return FPNumOut(self.width, False)
+ return FPPackData(self.width, self.id_wid)
- def setup(self, m, in_a, in_b, out_do_z):
+ def setup(self, m, i, out_do_z):
""" links module to inputs and outputs
"""
m.submodules.specialcases = self
- m.d.comb += self.i.a.eq(in_a)
- m.d.comb += self.i.b.eq(in_b)
+ m.d.comb += self.i.eq(i)
m.d.comb += out_do_z.eq(self.out_do_z)
def elaborate(self, platform):
m.submodules.sc_in_a = self.i.a
m.submodules.sc_in_b = self.i.b
- m.submodules.sc_out_z = self.out_z
+ m.submodules.sc_out_z = self.o.z
s_nomatch = Signal()
m.d.comb += s_nomatch.eq(self.i.a.s != self.i.b.s)
# if a is NaN or b is NaN return NaN
with m.If(self.i.a.is_nan | self.i.b.is_nan):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.nan(0)
+ m.d.comb += self.o.z.nan(0)
# XXX WEIRDNESS for FP16 non-canonical NaN handling
# under review
# if a is inf return inf (or NaN)
with m.Elif(self.i.a.is_inf):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.inf(self.i.a.s)
+ m.d.comb += self.o.z.inf(self.i.a.s)
# if a is inf and signs don't match return NaN
with m.If(self.i.b.exp_128 & s_nomatch):
- m.d.comb += self.out_z.nan(0)
+ m.d.comb += self.o.z.nan(0)
# if b is inf return inf
with m.Elif(self.i.b.is_inf):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.inf(self.i.b.s)
+ m.d.comb += self.o.z.inf(self.i.b.s)
# if a is zero and b zero return signed-a/b
with m.Elif(self.i.a.is_zero & self.i.b.is_zero):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.create(self.i.a.s & self.i.b.s,
+ m.d.comb += self.o.z.create(self.i.a.s & self.i.b.s,
self.i.b.e,
self.i.b.m[3:-1])
# if a is zero return b
with m.Elif(self.i.a.is_zero):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.create(self.i.b.s, self.i.b.e,
+ m.d.comb += self.o.z.create(self.i.b.s, self.i.b.e,
self.i.b.m[3:-1])
# if b is zero return a
with m.Elif(self.i.b.is_zero):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.create(self.i.a.s, self.i.a.e,
+ m.d.comb += self.o.z.create(self.i.a.s, self.i.a.e,
self.i.a.m[3:-1])
# if a equal to -b return zero (+ve zero)
with m.Elif(s_nomatch & m_match & (self.i.a.e == self.i.b.e)):
m.d.comb += self.out_do_z.eq(1)
- m.d.comb += self.out_z.zero(0)
+ m.d.comb += self.o.z.zero(0)
# Denormalised Number checks
with m.Else():
def __init__(self, width, id_wid):
FPState.__init__(self, "special_cases")
FPID.__init__(self, id_wid)
- self.smod = FPAddSpecialCasesMod(width)
+ self.smod = FPAddSpecialCasesMod(width, id_wid)
self.out_z = self.smod.ospec()
self.out_do_z = Signal(reset_less=True)
- self.dmod = FPAddDeNormMod(width)
+ self.dmod = FPAddDeNormMod(width, id_wid)
self.o = self.dmod.ospec()
- def setup(self, m, in_a, in_b, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.smod.setup(m, in_a, in_b, self.out_do_z)
- self.dmod.setup(m, in_a, in_b)
+ self.smod.setup(m, i, self.out_do_z)
+ self.dmod.setup(m, i)
if self.in_mid is not None:
m.d.comb += self.in_mid.eq(in_mid)
def action(self, m):
self.idsync(m)
with m.If(self.out_do_z):
- m.d.sync += self.out_z.v.eq(self.smod.out_z.v) # only take output
+ m.d.sync += self.out_z.z.v.eq(self.smod.o.z.v) # only take output
m.next = "put_z"
with m.Else():
m.next = "align"
class FPAddDeNormMod(FPState):
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
+ self.id_wid = id_wid
self.i = self.ispec()
self.o = self.ospec()
def ispec(self):
- return FPNumBase2Ops(self.width)
+ return FPNumBase2Ops(self.width, self.id_wid)
def ospec(self):
- return FPNumBase2Ops(self.width)
+ return FPNumBase2Ops(self.width, self.id_wid)
- def setup(self, m, in_a, in_b):
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.denormalise = self
- m.d.comb += self.i.a.eq(in_a)
- m.d.comb += self.i.b.eq(in_b)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
class FPNumIn2Ops:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.a = FPNumIn(None, width)
self.b = FPNumIn(None, width)
+ self.mid = Signal(id_wid, reset_less=True)
def eq(self, i):
- return [self.a.eq(i.a), self.b.eq(i.b)]
+ return [self.a.eq(i.a), self.b.eq(i.b), self.mid.eq(i.mid)]
class FPAddAlignSingleMod:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
+ self.id_wid = id_wid
self.i = self.ispec()
self.o = self.ospec()
def ispec(self):
- return FPNumBase2Ops(self.width)
+ return FPNumBase2Ops(self.width, self.id_wid)
def ospec(self):
- return FPNumIn2Ops(self.width)
+ return FPNumIn2Ops(self.width, self.id_wid)
- def setup(self, m, in_a, in_b):
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.align = self
- m.d.comb += self.i.a.eq(in_a)
- m.d.comb += self.i.b.eq(in_b)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
""" Aligns A against B or B against A, depending on which has the
def __init__(self, width, id_wid):
FPState.__init__(self, "align")
FPID.__init__(self, id_wid)
- self.mod = FPAddAlignSingleMod(width)
+ self.mod = FPAddAlignSingleMod(width, id_wid)
self.out_a = FPNumIn(None, width)
self.out_b = FPNumIn(None, width)
def __init__(self, width, id_wid):
FPState.__init__(self, "align")
FPID.__init__(self, id_wid)
- self.mod = FPAddAlignSingleMod(width)
- self.o = self.mod.ospec()
+ self.width = width
+ self.id_wid = id_wid
+ self.a1o = self.ospec()
- self.a0mod = FPAddStage0Mod(width)
- self.a0o = self.a0mod.ospec()
+ def ispec(self):
+ return FPNumBase2Ops(self.width, self.id_wid) # AlignSingle ispec
- self.a1mod = FPAddStage1Mod(width)
- self.a1o = self.a1mod.ospec()
+ def ospec(self):
+ return FPAddStage1Data(self.width, self.id_wid) # AddStage1 ospec
- def setup(self, m, in_a, in_b, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.mod.setup(m, in_a, in_b)
- m.d.comb += self.o.eq(self.mod.o)
+ mod = FPAddAlignSingleMod(self.width, self.id_wid)
+ mod.setup(m, i)
+ o = mod.ospec()
+ m.d.comb += o.eq(mod.o)
- self.a0mod.setup(m, self.o.a, self.o.b)
- m.d.comb += self.a0o.eq(self.a0mod.o)
+ a0mod = FPAddStage0Mod(self.width, self.id_wid)
+ a0mod.setup(m, o)
+ a0o = a0mod.ospec()
+ m.d.comb += a0o.eq(a0mod.o)
- self.a1mod.setup(m, self.a0o.tot, self.a0o.z)
+ a1mod = FPAddStage1Mod(self.width, self.id_wid)
+ a1mod.setup(m, a0o)
+ self.a1modo = a1mod.o
if self.in_mid is not None:
m.d.comb += self.in_mid.eq(in_mid)
def action(self, m):
self.idsync(m)
- m.d.sync += self.a1o.eq(self.a1mod.o)
+ m.d.sync += self.a1o.eq(self.a1modo)
m.next = "normalise_1"
class FPAddStage0Data:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.z = FPNumBase(width, False)
self.tot = Signal(self.z.m_width + 4, reset_less=True)
+ self.mid = Signal(id_wid, reset_less=True)
def eq(self, i):
- return [self.z.eq(i.z), self.tot.eq(i.tot)]
+ return [self.z.eq(i.z), self.tot.eq(i.tot), self.mid.eq(i.mid)]
class FPAddStage0Mod:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
+ self.id_wid = id_wid
self.i = self.ispec()
self.o = self.ospec()
def ispec(self):
- return FPNumBase2Ops(self.width)
+ return FPNumBase2Ops(self.width, self.id_wid)
def ospec(self):
- return FPAddStage0Data(self.width)
+ return FPAddStage0Data(self.width, self.id_wid)
- def setup(self, m, in_a, in_b):
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.add0 = self
- m.d.comb += self.i.a.eq(in_a)
- m.d.comb += self.i.b.eq(in_b)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
self.mod = FPAddStage0Mod(width)
self.o = self.mod.ospec()
- def setup(self, m, in_a, in_b, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.mod.setup(m, in_a, in_b)
+ self.mod.setup(m, i)
if self.in_mid is not None:
m.d.comb += self.in_mid.eq(in_mid)
class FPAddStage1Data:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.z = FPNumBase(width, False)
self.of = Overflow()
+ self.mid = Signal(id_wid, reset_less=True)
def eq(self, i):
- return [self.z.eq(i.z), self.of.eq(i.of)]
+ return [self.z.eq(i.z), self.of.eq(i.of), self.mid.eq(i.mid)]
detects when tot sum is too big (tot[27] is kinda a carry bit)
"""
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
+ self.id_wid = id_wid
self.i = self.ispec()
self.o = self.ospec()
def ispec(self):
- return FPAddStage0Data(self.width)
+ return FPAddStage0Data(self.width, self.id_wid)
def ospec(self):
- return FPAddStage1Data(self.width)
+ return FPAddStage1Data(self.width, self.id_wid)
- def setup(self, m, in_tot, in_z):
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.add1 = self
m.submodules.add1_out_overflow = self.o.of
- m.d.comb += self.i.z.eq(in_z)
- m.d.comb += self.i.tot.eq(in_tot)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
self.out_of = Overflow()
self.norm_stb = Signal()
- def setup(self, m, in_tot, in_z, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.mod.setup(m, in_tot, in_z)
+ self.mod.setup(m, i)
m.d.sync += self.norm_stb.eq(0) # sets to zero when not in add1 state
def __init__(self, width):
self.width = width
- self.in_z = FPNumBase(width, False)
- self.out_z = FPNumBase(width, False)
+ self.in_z = self.ispec()
+ self.out_z = self.ospec()
+
+ def ispec(self):
+ return FPNumBase(self.width, False)
+
+ def ospec(self):
+ return FPNumBase(self.width, False)
- def setup(self, m, in_z, out_z, modname):
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.normalise = self
- m.d.comb += self.in_z.eq(in_z)
- m.d.comb += out_z.eq(self.out_z)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
# initialise out from in (overridden below)
m.d.comb += self.out_z.eq(in_z)
m.d.comb += self.out_of.eq(in_of)
- # normalisation increase/decrease conditions
+ # normalisation decrease condition
decrease = Signal(reset_less=True)
m.d.comb += decrease.eq(in_z.m_msbzero)
# decrease exponent
return m
+class FPNorm1Data:
+
+ def __init__(self, width, id_wid):
+ self.roundz = Signal(reset_less=True)
+ self.z = FPNumBase(width, False)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.roundz.eq(i.roundz), self.mid.eq(i.mid)]
+
class FPNorm1ModSingle:
- def __init__(self, width):
+ def __init__(self, width, id_wid):
self.width = width
- self.out_norm = Signal(reset_less=True)
- self.in_z = FPNumBase(width, False)
- self.in_of = Overflow()
- self.out_z = FPNumBase(width, False)
- self.out_of = Overflow()
+ self.id_wid = id_wid
+ self.i = self.ispec()
+ self.o = self.ospec()
- def setup(self, m, in_z, in_of, out_z):
+ def ispec(self):
+ return FPAddStage1Data(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPNorm1Data(self.width, self.id_wid)
+
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.normalise_1 = self
-
- m.d.comb += self.in_z.eq(in_z)
- m.d.comb += self.in_of.eq(in_of)
-
- m.d.comb += out_z.eq(self.out_z)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
- mwid = self.out_z.m_width+2
+ mwid = self.o.z.m_width+2
pe = PriorityEncoder(mwid)
m.submodules.norm_pe = pe
- m.submodules.norm1_out_z = self.out_z
- m.submodules.norm1_out_overflow = self.out_of
- m.submodules.norm1_in_z = self.in_z
- m.submodules.norm1_in_overflow = self.in_of
+ of = Overflow()
+ m.d.comb += self.o.roundz.eq(of.roundz)
- in_z = FPNumBase(self.width, False)
- in_of = Overflow()
- m.submodules.norm1_insel_z = in_z
- m.submodules.norm1_insel_overflow = in_of
+ m.submodules.norm1_out_z = self.o.z
+ m.submodules.norm1_out_overflow = of
+ m.submodules.norm1_in_z = self.i.z
+ m.submodules.norm1_in_overflow = self.i.of
- espec = (len(in_z.e), True)
+ i = self.ispec()
+ m.submodules.norm1_insel_z = i.z
+ m.submodules.norm1_insel_overflow = i.of
+
+ espec = (len(i.z.e), True)
ediff_n126 = Signal(espec, reset_less=True)
msr = MultiShiftRMerge(mwid, espec)
m.submodules.multishift_r = msr
- m.d.comb += in_z.eq(self.in_z)
- m.d.comb += in_of.eq(self.in_of)
+ m.d.comb += i.eq(self.i)
# initialise out from in (overridden below)
- m.d.comb += self.out_z.eq(in_z)
- m.d.comb += self.out_of.eq(in_of)
+ m.d.comb += self.o.z.eq(i.z)
+ m.d.comb += of.eq(i.of)
# normalisation increase/decrease conditions
decrease = Signal(reset_less=True)
increase = Signal(reset_less=True)
- m.d.comb += decrease.eq(in_z.m_msbzero & in_z.exp_gt_n126)
- m.d.comb += increase.eq(in_z.exp_lt_n126)
+ m.d.comb += decrease.eq(i.z.m_msbzero & i.z.exp_gt_n126)
+ m.d.comb += increase.eq(i.z.exp_lt_n126)
# decrease exponent
with m.If(decrease):
# *sigh* not entirely obvious: count leading zeros (clz)
# we reverse the order of the bits.
temp_m = Signal(mwid, reset_less=True)
temp_s = Signal(mwid+1, reset_less=True)
- clz = Signal((len(in_z.e), True), reset_less=True)
+ clz = Signal((len(i.z.e), True), reset_less=True)
# make sure that the amount to decrease by does NOT
# go below the minimum non-INF/NaN exponent
- limclz = Mux(in_z.exp_sub_n126 > pe.o, pe.o,
- in_z.exp_sub_n126)
+ limclz = Mux(i.z.exp_sub_n126 > pe.o, pe.o,
+ i.z.exp_sub_n126)
m.d.comb += [
# cat round and guard bits back into the mantissa
- temp_m.eq(Cat(in_of.round_bit, in_of.guard, in_z.m)),
+ temp_m.eq(Cat(i.of.round_bit, i.of.guard, i.z.m)),
pe.i.eq(temp_m[::-1]), # inverted
clz.eq(limclz), # count zeros from MSB down
temp_s.eq(temp_m << clz), # shift mantissa UP
- self.out_z.e.eq(in_z.e - clz), # DECREASE exponent
- self.out_z.m.eq(temp_s[2:]), # exclude bits 0&1
- self.out_of.m0.eq(temp_s[2]), # copy of mantissa[0]
+ self.o.z.e.eq(i.z.e - clz), # DECREASE exponent
+ self.o.z.m.eq(temp_s[2:]), # exclude bits 0&1
+ of.m0.eq(temp_s[2]), # copy of mantissa[0]
# overflow in bits 0..1: got shifted too (leave sticky)
- self.out_of.guard.eq(temp_s[1]), # guard
- self.out_of.round_bit.eq(temp_s[0]), # round
+ of.guard.eq(temp_s[1]), # guard
+ of.round_bit.eq(temp_s[0]), # round
]
# increase exponent
with m.Elif(increase):
temp_m = Signal(mwid+1, reset_less=True)
m.d.comb += [
- temp_m.eq(Cat(in_of.sticky, in_of.round_bit, in_of.guard,
- in_z.m)),
- ediff_n126.eq(in_z.N126 - in_z.e),
+ temp_m.eq(Cat(i.of.sticky, i.of.round_bit, i.of.guard,
+ i.z.m)),
+ ediff_n126.eq(i.z.N126 - i.z.e),
# connect multi-shifter to inp/out mantissa (and ediff)
msr.inp.eq(temp_m),
msr.diff.eq(ediff_n126),
- self.out_z.m.eq(msr.m[3:]),
- self.out_of.m0.eq(temp_s[3]), # copy of mantissa[0]
+ self.o.z.m.eq(msr.m[3:]),
+ of.m0.eq(temp_s[3]), # copy of mantissa[0]
# overflow in bits 0..1: got shifted too (leave sticky)
- self.out_of.guard.eq(temp_s[2]), # guard
- self.out_of.round_bit.eq(temp_s[1]), # round
- self.out_of.sticky.eq(temp_s[0]), # sticky
- self.out_z.e.eq(in_z.e + ediff_n126),
+ of.guard.eq(temp_s[2]), # guard
+ of.round_bit.eq(temp_s[1]), # round
+ of.sticky.eq(temp_s[0]), # sticky
+ self.o.z.e.eq(i.z.e + ediff_n126),
]
return m
FPID.__init__(self, id_wid)
FPState.__init__(self, "normalise_1")
self.mod = FPNorm1ModSingle(width)
- self.out_norm = Signal(reset_less=True)
- self.out_z = FPNumBase(width)
+ self.out_z = FPNumBase(width, False)
self.out_roundz = Signal(reset_less=True)
- def setup(self, m, in_z, in_of, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.mod.setup(m, in_z, in_of, self.out_z)
+ self.mod.setup(m, i, self.out_z)
if self.in_mid is not None:
m.d.comb += self.in_mid.eq(in_mid)
def __init__(self, width, id_wid):
FPID.__init__(self, id_wid)
FPState.__init__(self, "normalise_1")
+ self.id_wid = id_wid
self.width = width
- def setup(self, m, in_z, in_of, in_mid):
+ def ispec(self):
+ return FPAddStage1Data(self.width, self.id_wid) # Norm1ModSingle ispec
+
+ def ospec(self):
+ return FPPackData(self.width, self.id_wid) # FPPackMod ospec
+
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
# Normalisation (chained to input in_z+in_of)
- nmod = FPNorm1ModSingle(self.width)
- n_out_z = FPNumBase(self.width)
- n_out_roundz = Signal(reset_less=True)
- nmod.setup(m, in_z, in_of, n_out_z)
+ nmod = FPNorm1ModSingle(self.width, self.id_wid)
+ nmod.setup(m, i)
+ n_out = nmod.ospec()
+ m.d.comb += n_out.eq(nmod.o)
# Rounding (chained to normalisation)
- rmod = FPRoundMod(self.width)
- r_out_z = FPNumBase(self.width)
- rmod.setup(m, n_out_z, n_out_roundz)
- m.d.comb += n_out_roundz.eq(nmod.out_of.roundz)
+ rmod = FPRoundMod(self.width, self.id_wid)
+ rmod.setup(m, n_out)
+ r_out_z = rmod.ospec()
m.d.comb += r_out_z.eq(rmod.out_z)
# Corrections (chained to rounding)
- cmod = FPCorrectionsMod(self.width)
- c_out_z = FPNumBase(self.width)
+ cmod = FPCorrectionsMod(self.width, self.id_wid)
cmod.setup(m, r_out_z)
+ c_out_z = cmod.ospec()
m.d.comb += c_out_z.eq(cmod.out_z)
# Pack (chained to corrections)
- self.pmod = FPPackMod(self.width)
- self.out_z = FPNumBase(self.width)
+ self.pmod = FPPackMod(self.width, self.id_wid)
self.pmod.setup(m, c_out_z)
+ self.out_z = self.pmod.ospec()
# Multiplex ID
if self.in_mid is not None:
def action(self, m):
self.idsync(m) # copies incoming ID to outgoing
- m.d.sync += self.out_z.v.eq(self.pmod.out_z.v) # outputs packed result
+ m.d.sync += self.out_z.z.v.eq(self.pmod.o.z.v) # outputs packed result
m.next = "pack_put_z"
+class FPRoundData:
+
+ def __init__(self, width, id_wid):
+ self.z = FPNumBase(width, False)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.mid.eq(i.mid)]
+
+
class FPRoundMod:
- def __init__(self, width):
- self.in_roundz = Signal(reset_less=True)
- self.in_z = FPNumBase(width, False)
- self.out_z = FPNumBase(width, False)
+ def __init__(self, width, id_wid):
+ self.width = width
+ self.id_wid = id_wid
+ self.i = self.ispec()
+ self.out_z = self.ospec()
- def setup(self, m, in_z, roundz):
- m.submodules.roundz = self
+ def ispec(self):
+ return FPNorm1Data(self.width, self.id_wid)
- m.d.comb += self.in_z.eq(in_z)
- m.d.comb += self.in_roundz.eq(roundz)
+ def ospec(self):
+ return FPRoundData(self.width, self.id_wid)
+
+ def setup(self, m, i):
+ m.submodules.roundz = self
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
- m.d.comb += self.out_z.eq(self.in_z)
- with m.If(self.in_roundz):
- m.d.comb += self.out_z.m.eq(self.in_z.m + 1) # mantissa rounds up
- with m.If(self.in_z.m == self.in_z.m1s): # all 1s
- m.d.comb += self.out_z.e.eq(self.in_z.e + 1) # exponent up
+ m.d.comb += self.out_z.eq(self.i)
+ with m.If(self.i.roundz):
+ m.d.comb += self.out_z.z.m.eq(self.i.z.m + 1) # mantissa rounds up
+ with m.If(self.i.z.m == self.i.z.m1s): # all 1s
+ m.d.comb += self.out_z.z.e.eq(self.i.z.e + 1) # exponent up
return m
FPState.__init__(self, "round")
FPID.__init__(self, id_wid)
self.mod = FPRoundMod(width)
- self.out_z = FPNumBase(width)
+ self.out_z = self.ospec()
+
+ def ispec(self):
+ return self.mod.ispec()
+
+ def ospec(self):
+ return self.mod.ospec()
- def setup(self, m, in_z, roundz, in_mid):
+ def setup(self, m, i, in_mid):
""" links module to inputs and outputs
"""
- self.mod.setup(m, in_z, roundz)
+ self.mod.setup(m, i)
if self.in_mid is not None:
m.d.comb += self.in_mid.eq(in_mid)
class FPCorrectionsMod:
- def __init__(self, width):
- self.in_z = FPNumOut(width, False)
- self.out_z = FPNumOut(width, False)
+ def __init__(self, width, id_wid):
+ self.width = width
+ self.id_wid = id_wid
+ self.i = self.ispec()
+ self.out_z = self.ospec()
- def setup(self, m, in_z):
+ def ispec(self):
+ return FPRoundData(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPRoundData(self.width, self.id_wid)
+
+ def setup(self, m, i):
""" links module to inputs and outputs
"""
m.submodules.corrections = self
- m.d.comb += self.in_z.eq(in_z)
+ m.d.comb += self.i.eq(i)
def elaborate(self, platform):
m = Module()
- m.submodules.corr_in_z = self.in_z
- m.submodules.corr_out_z = self.out_z
- m.d.comb += self.out_z.eq(self.in_z)
- with m.If(self.in_z.is_denormalised):
- m.d.comb += self.out_z.e.eq(self.in_z.N127)
+ m.submodules.corr_in_z = self.i.z
+ m.submodules.corr_out_z = self.out_z.z
+ m.d.comb += self.out_z.eq(self.i)
+ with m.If(self.i.z.is_denormalised):
+ m.d.comb += self.out_z.z.e.eq(self.i.z.N127)
return m
FPState.__init__(self, "corrections")
FPID.__init__(self, id_wid)
self.mod = FPCorrectionsMod(width)
- self.out_z = FPNumBase(width)
+ self.out_z = self.ospec()
+
+ def ispec(self):
+ return self.mod.ispec()
+
+ def ospec(self):
+ return self.mod.ospec()
def setup(self, m, in_z, in_mid):
""" links module to inputs and outputs
m.next = "pack"
+class FPPackData:
+
+ def __init__(self, width, id_wid):
+ self.z = FPNumOut(width, False)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.mid.eq(i.mid)]
+
+
class FPPackMod:
- def __init__(self, width):
- self.in_z = FPNumOut(width, False)
- self.out_z = FPNumOut(width, False)
+ def __init__(self, width, id_wid):
+ self.width = width
+ self.id_wid = id_wid
+ self.i = self.ispec()
+ self.o = self.ospec()
+
+ def ispec(self):
+ return FPRoundData(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPPackData(self.width, self.id_wid)
def setup(self, m, in_z):
""" links module to inputs and outputs
"""
m.submodules.pack = self
- m.d.comb += self.in_z.eq(in_z)
+ m.d.comb += self.i.eq(in_z)
def elaborate(self, platform):
m = Module()
- m.submodules.pack_in_z = self.in_z
- with m.If(self.in_z.is_overflowed):
- m.d.comb += self.out_z.inf(self.in_z.s)
+ m.submodules.pack_in_z = self.i.z
+ with m.If(self.i.z.is_overflowed):
+ m.d.comb += self.o.z.inf(self.i.z.s)
with m.Else():
- m.d.comb += self.out_z.create(self.in_z.s, self.in_z.e, self.in_z.m)
+ m.d.comb += self.o.z.create(self.i.z.s, self.i.z.e, self.i.z.m)
return m
+class FPPackData:
+ def __init__(self, width, id_wid):
+ self.z = FPNumOut(width, False)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.mid.eq(i.mid)]
+
+
class FPPack(FPState, FPID):
def __init__(self, width, id_wid):
FPState.__init__(self, "pack")
FPID.__init__(self, id_wid)
self.mod = FPPackMod(width)
- self.out_z = FPNumOut(width, False)
+ self.out_z = self.ospec()
+
+ def ispec(self):
+ return self.mod.ispec()
+
+ def ospec(self):
+ return self.mod.ospec()
def setup(self, m, in_z, in_mid):
""" links module to inputs and outputs
if self.in_mid is not None:
m.d.sync += self.out_mid.eq(self.in_mid)
m.d.sync += [
- self.out_z.v.eq(self.in_z.v)
+ self.out_z.z.v.eq(self.in_z.v)
]
- with m.If(self.out_z.stb & self.out_z.ack):
- m.d.sync += self.out_z.stb.eq(0)
+ with m.If(self.out_z.z.stb & self.out_z.z.ack):
+ m.d.sync += self.out_z.z.stb.eq(0)
m.next = self.to_state
with m.Else():
- m.d.sync += self.out_z.stb.eq(1)
+ m.d.sync += self.out_z.z.stb.eq(1)
class FPPutZIdx(FPState):
with m.Else():
m.d.sync += self.out_zs[self.in_mid].stb.eq(1)
+class FPADDBaseData:
+
+ def __init__(self, width, id_wid):
+ self.width = width
+ self.id_wid = id_wid
+ self.a = Signal(width)
+ self.b = Signal(width)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.a.eq(i.a), self.b.eq(i.b), self.mid.eq(i.mid)]
+
+
+class FPOpData:
+ def __init__(self, width, id_wid):
+ self.z = FPOp(width)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.mid.eq(i.mid)]
+
class FPADDBaseMod(FPID):
"""
FPID.__init__(self, id_wid)
self.width = width
+ self.id_wid = id_wid
self.single_cycle = single_cycle
self.compact = compact
self.in_t = Trigger()
- self.in_a = Signal(width)
- self.in_b = Signal(width)
- self.out_z = FPOp(width)
+ self.i = self.ispec()
+ self.o = self.ospec()
self.states = []
+ def ispec(self):
+ return FPADDBaseData(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPOpData(self.width, self.id_wid)
+
def add_state(self, state):
self.states.append(state)
return state
""" creates the HDL code-fragment for FPAdd
"""
m = Module()
- m.submodules.out_z = self.out_z
+ m.submodules.out_z = self.o.z
m.submodules.in_t = self.in_t
if self.compact:
self.get_compact_fragment(m, platform)
def get_longer_fragment(self, m, platform=None):
get = self.add_state(FPGet2Op("get_ops", "special_cases",
- self.in_a, self.in_b, self.width))
- get.setup(m, self.in_a, self.in_b, self.in_t.stb, self.in_t.ack)
+ self.width))
+ get.setup(m, self.i, self.in_t.stb, self.in_t.ack)
a = get.out_op1
b = get.out_op2
def get_compact_fragment(self, m, platform=None):
get = self.add_state(FPGet2Op("get_ops", "special_cases",
- self.in_a, self.in_b, self.width))
- get.setup(m, self.in_a, self.in_b, self.in_t.stb, self.in_t.ack)
- a = get.out_op1
- b = get.out_op2
+ self.width, self.id_wid))
+ get.setup(m, self.i, self.in_t.stb, self.in_t.ack)
sc = self.add_state(FPAddSpecialCasesDeNorm(self.width, self.id_wid))
- sc.setup(m, a, b, self.in_mid)
+ sc.setup(m, get.o, self.in_mid)
alm = self.add_state(FPAddAlignSingleAdd(self.width, self.id_wid))
- alm.setup(m, sc.o.a, sc.o.b, sc.in_mid)
+ alm.setup(m, sc.o, sc.in_mid)
n1 = self.add_state(FPNormToPack(self.width, self.id_wid))
- n1.setup(m, alm.a1o.z, alm.a1o.of, alm.in_mid)
+ n1.setup(m, alm.a1o, alm.in_mid)
- ppz = self.add_state(FPPutZ("pack_put_z", n1.out_z, self.out_z,
+ ppz = self.add_state(FPPutZ("pack_put_z", n1.out_z.z, self.o,
n1.in_mid, self.out_mid))
- pz = self.add_state(FPPutZ("put_z", sc.out_z, self.out_z,
+ pz = self.add_state(FPPutZ("put_z", sc.out_z.z, self.o,
sc.in_mid, self.out_mid))
self.width = width
self.single_cycle = single_cycle
self.mod = FPADDBaseMod(width, id_wid, single_cycle)
+ self.o = self.ospec()
self.in_t = Trigger()
- self.in_a = Signal(width)
- self.in_b = Signal(width)
- #self.out_z = FPOp(width)
+ self.i = self.ispec()
self.z_done = Signal(reset_less=True) # connects to out_z Strobe
self.in_accept = Signal(reset_less=True)
self.add_stb = Signal(reset_less=True)
self.add_ack = Signal(reset=0, reset_less=True)
- def setup(self, m, a, b, add_stb, in_mid, out_z, out_mid):
- self.out_z = out_z
- self.out_mid = out_mid
- m.d.comb += [self.in_a.eq(a),
- self.in_b.eq(b),
- self.mod.in_a.eq(self.in_a),
- self.mod.in_b.eq(self.in_b),
+ def ispec(self):
+ return self.mod.ispec()
+
+ def ospec(self):
+ return self.mod.ospec()
+
+ def setup(self, m, i, add_stb, in_mid):
+ m.d.comb += [self.i.eq(i),
+ self.mod.i.eq(self.i),
self.in_mid.eq(in_mid),
self.mod.in_mid.eq(self.in_mid),
- self.z_done.eq(self.mod.out_z.trigger),
+ self.z_done.eq(self.mod.o.z.trigger),
#self.add_stb.eq(add_stb),
self.mod.in_t.stb.eq(self.in_t.stb),
self.in_t.ack.eq(self.mod.in_t.ack),
- self.out_mid.eq(self.mod.out_mid),
- self.out_z.v.eq(self.mod.out_z.v),
- self.out_z.stb.eq(self.mod.out_z.stb),
- self.mod.out_z.ack.eq(self.out_z.ack),
+ self.o.mid.eq(self.mod.o.mid),
+ self.o.z.v.eq(self.mod.o.z.v),
+ self.o.z.stb.eq(self.mod.o.z.stb),
+ self.mod.o.z.ack.eq(self.o.z.ack),
]
m.d.sync += self.add_stb.eq(add_stb)
m.d.sync += self.add_ack.eq(0) # sets to zero when not in active state
- m.d.sync += self.out_z.ack.eq(0) # likewise
+ m.d.sync += self.o.z.ack.eq(0) # likewise
#m.d.sync += self.in_t.stb.eq(0)
m.submodules.fpadd = self.mod
with m.Else():
m.d.sync += [self.add_ack.eq(0),
self.in_t.stb.eq(0),
- self.out_z.ack.eq(1),
+ self.o.z.ack.eq(1),
]
with m.Else():
# done: acknowledge, and write out id and value
with m.Else():
m.d.sync += self.out_z.stb.eq(1)
+
class ResArray:
def __init__(self, width, id_wid):
self.width = width
in_a = self.rs[0][0]
in_b = self.rs[0][1]
- out_z = FPOp(self.width)
- out_mid = Signal(self.id_wid, reset_less=True)
- m.submodules.out_z = out_z
-
geta = self.add_state(FPGetOp("get_a", "get_b",
in_a, self.width))
geta.setup(m, in_a)
ab = FPADDBase(self.width, self.id_wid, self.single_cycle)
ab = self.add_state(ab)
- ab.setup(m, a, b, getb.out_decode, self.ids.in_mid,
- out_z, out_mid)
+ abd = ab.ispec() # create an input spec object for FPADDBase
+ m.d.sync += [abd.a.eq(a), abd.b.eq(b), abd.mid.eq(self.ids.in_mid)]
+ ab.setup(m, abd, getb.out_decode, self.ids.in_mid)
+ o = ab.o
- pz = self.add_state(FPPutZIdx("put_z", ab.out_z, self.res,
- out_mid, "get_a"))
+ pz = self.add_state(FPPutZIdx("put_z", o.z, self.res,
+ o.mid, "get_a"))
with m.FSM() as fsm: