from nmutil.latch import SRLatch, latchregister
+from soc.experiment.compalu_multi import go_record
from soc.experiment.testmem import TestMemory
from soc.decoder.power_enums import InternalOp
-from .alu_hier import CompALUOpSubset
+from soc.experiment.alu_hier import CompALUOpSubset
# internal opcodes. hypothetically this could do more combinations.
j = i + 1 # name numbering to match dest1/2...
dst.append(Signal(rwid, name="dest%d_i" % j, reset_less=True))
- self.go_rd_i = Signal(n_src, reset_less=True) # go read in
- self.go_ad_i = Signal(n_dst, reset_less=True) # go address in
- self.go_wr_i = Signal(reset_less=True) # go write in
+ self.rd = go_record(n_src, name="rd") # read in, req out
+ self.wr = go_record(n_dst, name="wr") # write in, req out
+ self.go_rd_i = self.rd.go # temporary naming
+ self.go_wr_i = self.wr.go # temporary naming
+ self.rd_rel_o = self.rd.rel # temporary naming
+ self.req_rel_o = self.wr.rel # temporary naming
+
+ self.go_ad_i = Signal(reset_less=True) # go address in
self.go_st_i = Signal(reset_less=True) # go store in
self.issue_i = Signal(reset_less=True) # fn issue in
self.isalu_i = Signal(reset_less=True) # fn issue as ALU in
self.busy_o = Signal(reset_less=True) # fn busy out
self.dest = Array(dst)
self.data_o = dst[0] # Dest out
- self.rd_rel_o = Signal(n_src, reset_less=True) # request src1/src2
self.adr_rel_o = Signal(reset_less=True) # request address (from mem)
self.sto_rel_o = Signal(reset_less=True) # request store (to mem)
- self.req_rel_o = Signal(n_dst, reset_less=True) # req write (result)
self.done_o = Signal(reset_less=True) # final release signal
self.data_o = Signal(rwid, reset_less=True) # Dest out (LD or ALU)
self.addr_o = Signal(rwid, reset_less=True) # Address out (LD or ST)
reset_a = Signal(reset_less=True)
reset_s = Signal(reset_less=True)
reset_r = Signal(reset_less=True)
- comb += reset_b.eq(self.go_st_i | self.go_wr_i |
+ comb += reset_b.eq(self.go_st_i | self.wr.go |
self.go_ad_i | self.go_die_i)
- comb += reset_w.eq(self.go_wr_i | self.go_die_i)
+ comb += reset_w.eq(self.wr.go | self.go_die_i)
comb += reset_s.eq(self.go_st_i | self.go_die_i)
- comb += reset_r.eq(self.go_rd_i | self.go_die_i)
- # this one is slightly different, issue_alu_i selects go_wr_i)
- a_sel = Mux(self.isalu_i, self.go_wr_i, self.go_ad_i)
+ comb += reset_r.eq(self.rd.go | self.go_die_i)
+ # this one is slightly different, issue_alu_i selects wr.go)
+ a_sel = Mux(self.isalu_i, self.wr.go, self.go_ad_i)
comb += reset_a.eq(a_sel | self.go_die_i)
# opcode decode
sync += src_l.r.eq(reset_r)
# addr latch
- sync += adr_l.s.eq(self.go_rd_i)
+ sync += adr_l.s.eq(self.rd.go)
sync += adr_l.r.eq(reset_a)
# dest operand latch
- sync += req_l.s.eq(self.go_ad_i | self.go_st_i | self.go_wr_i)
+ sync += req_l.s.eq(self.go_ad_i | self.go_st_i | self.wr.go)
sync += req_l.r.eq(reset_w)
# store latch
- sync += sto_l.s.eq(self.go_rd_i) # XXX not sure which
+ sync += sto_l.s.eq(self.rd.go) # XXX not sure which
sync += sto_l.r.eq(reset_s)
# create a latch/register for the operand
# outputs: busy and release signals
busy_o = self.busy_o
comb += self.busy_o.eq(opc_l.q) # busy out
- comb += self.rd_rel_o.eq(src_l.q & busy_o) # src1/src2 req rel
+ comb += self.rd.rel.eq(src_l.q & busy_o) # src1/src2 req rel
comb += self.sto_rel_o.eq(sto_l.q & busy_o & self.shadown_i & op_is_st)
# request release enabled based on if op is a LD/ST or a plain ALU
comb += wr_q.eq(req_l.q & (~op_ldst | op_is_ld))
comb += alulatch.eq((op_ldst & self.adr_rel_o) |
- (~op_ldst & self.req_rel_o))
+ (~op_ldst & self.wr.rel))
# select immediate if opcode says so. however also change the latch
# to trigger *from* the opcode latch instead.
# on a go_read, tell the ALU we're accepting data.
# NOTE: this spells TROUBLE if the ALU isn't ready!
# go_read is only valid for one clock!
- with m.If(self.go_rd_i): # src operands ready, GO!
+ with m.If(self.rd.go): # src operands ready, GO!
with m.If(~self.alu.p_ready_o): # no ACK yet
m.d.comb += self.alu.p_valid_i.eq(1) # so indicate valid
# only proceed if ALU says its output is valid
with m.If(self.alu.n_valid_o):
# write req release out. waits until shadow is dropped.
- comb += self.req_rel_o.eq(wr_q & busy_o & self.shadown_i)
+ comb += self.wr.rel.eq(wr_q & busy_o & self.shadown_i)
# address release only happens on LD/ST, and is shadowed.
comb += self.adr_rel_o.eq(adr_l.q & op_ldst & busy_o &
self.shadown_i)
# when output latch is ready, and ALU says ready, accept ALU output
- with m.If(self.req_rel_o):
+ with m.If(self.wr.rel):
# tells ALU "thanks got it"
m.d.comb += self.alu.n_ready_i.eq(1)
# provide "done" signal: select req_rel for non-LD/ST, adr_rel for LD/ST
- comb += self.done_o.eq((self.req_rel_o & ~op_ldst) |
+ comb += self.done_o.eq((self.wr.rel & ~op_ldst) |
(self.adr_rel_o & op_ldst))
# put the register directly onto the output bus on a go_write
# this is "ALU mode". go_wr_i *must* be deasserted on next clock
- with m.If(self.go_wr_i):
+ with m.If(self.wr.go):
comb += self.data_o.eq(data_r)
# "LD/ST" mode: put the register directly onto the *address* bus
return m
def __iter__(self):
- yield self.go_rd_i
+ yield self.rd.go
yield self.go_ad_i
- yield self.go_wr_i
+ yield self.wr.go
yield self.go_st_i
yield self.issue_i
yield self.isalu_i
yield from self.oper_i.ports()
yield from self.src_i
yield self.busy_o
- yield self.rd_rel_o
+ yield self.rd.rel
yield self.adr_rel_o
yield self.sto_rel_o
- yield self.req_rel_o
+ yield self.wr.rel
yield self.data_o
yield self.load_mem_o
yield self.stwd_mem_o
yield
yield dut.issue_i.eq(0)
yield
- yield dut.go_rd_i.eq(0b11)
- yield from wait_for(dut.rd_rel_o)
- yield dut.go_rd_i.eq(0)
+ yield dut.rd.go.eq(0b11)
+ yield from wait_for(dut.rd.rel)
+ yield dut.rd.go.eq(0)
yield from wait_for(dut.adr_rel_o)
yield dut.go_st_i.eq(1)
yield from wait_for(dut.sto_rel_o)
yield
yield dut.issue_i.eq(0)
yield
- yield dut.go_rd_i.eq(0b11)
- yield from wait_for(dut.rd_rel_o)
- yield dut.go_rd_i.eq(0)
+ yield dut.rd.go.eq(0b11)
+ yield from wait_for(dut.rd.rel)
+ yield dut.rd.go.eq(0)
yield from wait_for(dut.adr_rel_o)
yield dut.go_ad_i.eq(1)
yield from wait_for(dut.busy_o)
yield
yield dut.issue_i.eq(0)
yield
- yield dut.go_rd_i.eq(1)
- yield from wait_for(dut.rd_rel_o)
- yield dut.go_rd_i.eq(0)
- yield from wait_for(dut.req_rel_o)
- yield dut.go_wr_i.eq(1)
+ yield dut.rd.go.eq(1)
+ yield from wait_for(dut.rd.rel)
+ yield dut.rd.go.eq(0)
+ yield from wait_for(dut.wr.rel)
+ yield dut.wr.go.eq(1)
yield from wait_for(dut.busy_o)
yield
data = (yield dut.data_o)
- yield dut.go_wr_i.eq(0)
+ yield dut.wr.go.eq(0)
yield
# wait_for(dut.stwd_mem_o)
return data
projects / soc.git / blobdiff