write TAG_BITS width which may not match full ram blocks and might
cause muxes to be inferred for "partial writes".
* Check if making the read size of PLRU a ROM helps utilization
-
"""
-from enum import Enum, unique
+
+from enum import (Enum, unique)
from nmigen import (Module, Signal, Elaboratable, Cat, Array, Const, Repl)
from nmigen.cli import main, rtlil
from nmutil.iocontrol import RecordObject
WBIOMasterOut, WBIOSlaveOut)
# for test
-from nmigen_soc.wishbone.sram import SRAM
+from soc.bus.sram import SRAM
from nmigen import Memory
from nmutil.util import wrap
from nmigen.cli import main, rtlil
-if True:
- from nmigen.back.pysim import Simulator, Delay, Settle
-else:
- from nmigen.sim.cxxsim import Simulator, Delay, Settle
+
+# NOTE: to use cxxsim, export NMIGEN_SIM_MODE=cxxsim from the shell
+# Also, check out the cxxsim nmigen branch, and latest yosys from git
+from nmutil.sim_tmp_alternative import Simulator, Settle
SIM = 0
LOG_LENGTH = 0
ROW_SIZE_BITS = ROW_SIZE * 8
-# ROW_PER_LINE is the number of row
-# (wishbone) transactions in a line
+# ROW_PER_LINE is the number of row (wishbone) transactions in a line
ROW_PER_LINE = LINE_SIZE // ROW_SIZE
-# BRAM_ROWS is the number of rows in
-# BRAM needed to represent the full icache
+# BRAM_ROWS is the number of rows in BRAM needed to represent the full icache
BRAM_ROWS = NUM_LINES * ROW_PER_LINE
-# INSN_PER_ROW is the number of 32bit
-# instructions per BRAM row
+# INSN_PER_ROW is the number of 32bit instructions per BRAM row
INSN_PER_ROW = ROW_SIZE_BITS // 32
-print("ROW_SIZE", ROW_SIZE)
-print("ROW_SIZE_BITS", ROW_SIZE_BITS)
-print("ROW_PER_LINE", ROW_PER_LINE)
-print("BRAM_ROWS", BRAM_ROWS)
-print("INSN_PER_ROW", INSN_PER_ROW)
-
# Bit fields counts in the address
#
-# INSN_BITS is the number of bits to
-# select an instruction in a row
+# INSN_BITS is the number of bits to select an instruction in a row
INSN_BITS = log2_int(INSN_PER_ROW)
-# ROW_BITS is the number of bits to
-# select a row
+# ROW_BITS is the number of bits to select a row
ROW_BITS = log2_int(BRAM_ROWS)
-# ROW_LINEBITS is the number of bits to
-# select a row within a line
-ROW_LINEBITS = log2_int(ROW_PER_LINE)
-# LINE_OFF_BITS is the number of bits for
-# the offset in a cache line
+# ROW_LINE_BITS is the number of bits to select a row within a line
+ROW_LINE_BITS = log2_int(ROW_PER_LINE)
+# LINE_OFF_BITS is the number of bits for the offset in a cache line
LINE_OFF_BITS = log2_int(LINE_SIZE)
-# ROW_OFF_BITS is the number of bits for
-# the offset in a row
+# ROW_OFF_BITS is the number of bits for the offset in a row
ROW_OFF_BITS = log2_int(ROW_SIZE)
-# INDEX_BITS is the number of bits to
-# select a cache line
+# INDEX_BITS is the number of bits to select a cache line
INDEX_BITS = log2_int(NUM_LINES)
-# SET_SIZE_BITS is the log base 2 of
-# the set size
+# SET_SIZE_BITS is the log base 2 of the set size
SET_SIZE_BITS = LINE_OFF_BITS + INDEX_BITS
-# TAG_BITS is the number of bits of
-# the tag part of the address
+# TAG_BITS is the number of bits of the tag part of the address
TAG_BITS = REAL_ADDR_BITS - SET_SIZE_BITS
# TAG_WIDTH is the width in bits of each way of the tag RAM
-TAG_WIDTH = TAG_BITS + 7 - ((TAG_BITS + 7) % 8)
+TAG_WIDTH = TAG_BITS + 7 - ((TAG_BITS + 7) % 8)
-# WAY_BITS is the number of bits to
-# select a way
+# WAY_BITS is the number of bits to select a way
WAY_BITS = log2_int(NUM_WAYS)
TAG_RAM_WIDTH = TAG_BITS * NUM_WAYS
-# -- L1 ITLB.
-# constant TLB_BITS : natural := log2(TLB_SIZE);
-# constant TLB_EA_TAG_BITS : natural := 64 - (TLB_LG_PGSZ + TLB_BITS);
-# constant TLB_PTE_BITS : natural := 64;
+# L1 ITLB
TLB_BITS = log2_int(TLB_SIZE)
TLB_EA_TAG_BITS = 64 - (TLB_LG_PGSZ + TLB_BITS)
TLB_PTE_BITS = 64
-
-print("INSN_BITS", INSN_BITS)
-print("ROW_BITS", ROW_BITS)
-print("ROW_LINEBITS", ROW_LINEBITS)
-print("LINE_OFF_BITS", LINE_OFF_BITS)
-print("ROW_OFF_BITS", ROW_OFF_BITS)
-print("INDEX_BITS", INDEX_BITS)
-print("SET_SIZE_BITS", SET_SIZE_BITS)
-print("TAG_BITS", TAG_BITS)
-print("WAY_BITS", WAY_BITS)
-print("TAG_RAM_WIDTH", TAG_RAM_WIDTH)
-print("TLB_BITS", TLB_BITS)
-print("TLB_EA_TAG_BITS", TLB_EA_TAG_BITS)
-print("TLB_PTE_BITS", TLB_PTE_BITS)
-
-
-
-
-# architecture rtl of icache is
-#constant ROW_SIZE_BITS : natural := ROW_SIZE*8;
-#-- ROW_PER_LINE is the number of row (wishbone
-#-- transactions) in a line
-#constant ROW_PER_LINE : natural := LINE_SIZE / ROW_SIZE;
-#-- BRAM_ROWS is the number of rows in BRAM
-#-- needed to represent the full
-#-- icache
-#constant BRAM_ROWS : natural := NUM_LINES * ROW_PER_LINE;
-#-- INSN_PER_ROW is the number of 32bit instructions per BRAM row
-#constant INSN_PER_ROW : natural := ROW_SIZE_BITS / 32;
-#-- Bit fields counts in the address
-#
-#-- INSN_BITS is the number of bits to select
-#-- an instruction in a row
-#constant INSN_BITS : natural := log2(INSN_PER_ROW);
-#-- ROW_BITS is the number of bits to select a row
-#constant ROW_BITS : natural := log2(BRAM_ROWS);
-#-- ROW_LINEBITS is the number of bits to
-#-- select a row within a line
-#constant ROW_LINEBITS : natural := log2(ROW_PER_LINE);
-#-- LINE_OFF_BITS is the number of bits for the offset
-#-- in a cache line
-#constant LINE_OFF_BITS : natural := log2(LINE_SIZE);
-#-- ROW_OFF_BITS is the number of bits for the offset in a row
-#constant ROW_OFF_BITS : natural := log2(ROW_SIZE);
-#-- INDEX_BITS is the number of bits to select a cache line
-#constant INDEX_BITS : natural := log2(NUM_LINES);
-#-- SET_SIZE_BITS is the log base 2 of the set size
-#constant SET_SIZE_BITS : natural := LINE_OFF_BITS + INDEX_BITS;
-#-- TAG_BITS is the number of bits of the tag part of the address
-#constant TAG_BITS : natural := REAL_ADDR_BITS - SET_SIZE_BITS;
-#-- WAY_BITS is the number of bits to select a way
-#constant WAY_BITS : natural := log2(NUM_WAYS);
-
-#-- Example of layout for 32 lines of 64 bytes:
-#--
-#-- .. tag |index| line |
-#-- .. | row | |
-#-- .. | | | |00| zero (2)
-#-- .. | | |-| | INSN_BITS (1)
-#-- .. | |---| | ROW_LINEBITS (3)
-#-- .. | |--- - --| LINE_OFF_BITS (6)
-#-- .. | |- --| ROW_OFF_BITS (3)
-#-- .. |----- ---| | ROW_BITS (8)
-#-- .. |-----| | INDEX_BITS (5)
-#-- .. --------| | TAG_BITS (53)
- # Example of layout for 32 lines of 64 bytes:
- #
- # .. tag |index| line |
- # .. | row | |
- # .. | | | |00| zero (2)
- # .. | | |-| | INSN_BITS (1)
- # .. | |---| | ROW_LINEBITS (3)
- # .. | |--- - --| LINE_OFF_BITS (6)
- # .. | |- --| ROW_OFF_BITS (3)
- # .. |----- ---| | ROW_BITS (8)
- # .. |-----| | INDEX_BITS (5)
- # .. --------| | TAG_BITS (53)
-
-#subtype row_t is integer range 0 to BRAM_ROWS-1;
-#subtype index_t is integer range 0 to NUM_LINES-1;
-#subtype way_t is integer range 0 to NUM_WAYS-1;
-#subtype row_in_line_t is unsigned(ROW_LINEBITS-1 downto 0);
-#
-#-- The cache data BRAM organized as described above for each way
+print("BRAM_ROWS =", BRAM_ROWS)
+print("INDEX_BITS =", INDEX_BITS)
+print("INSN_BITS =", INSN_BITS)
+print("INSN_PER_ROW =", INSN_PER_ROW)
+print("LINE_SIZE =", LINE_SIZE)
+print("LINE_OFF_BITS =", LINE_OFF_BITS)
+print("LOG_LENGTH =", LOG_LENGTH)
+print("NUM_LINES =", NUM_LINES)
+print("NUM_WAYS =", NUM_WAYS)
+print("REAL_ADDR_BITS =", REAL_ADDR_BITS)
+print("ROW_BITS =", ROW_BITS)
+print("ROW_OFF_BITS =", ROW_OFF_BITS)
+print("ROW_LINE_BITS =", ROW_LINE_BITS)
+print("ROW_PER_LINE =", ROW_PER_LINE)
+print("ROW_SIZE =", ROW_SIZE)
+print("ROW_SIZE_BITS =", ROW_SIZE_BITS)
+print("SET_SIZE_BITS =", SET_SIZE_BITS)
+print("SIM =", SIM)
+print("TAG_BITS =", TAG_BITS)
+print("TAG_RAM_WIDTH =", TAG_RAM_WIDTH)
+print("TAG_BITS =", TAG_BITS)
+print("TLB_BITS =", TLB_BITS)
+print("TLB_EA_TAG_BITS =", TLB_EA_TAG_BITS)
+print("TLB_LG_PGSZ =", TLB_LG_PGSZ)
+print("TLB_PTE_BITS =", TLB_PTE_BITS)
+print("TLB_SIZE =", TLB_SIZE)
+print("WAY_BITS =", WAY_BITS)
+
+# from microwatt/utils.vhdl
+def ispow2(n):
+ return n != 0 and (n & (n - 1)) == 0
+
+assert LINE_SIZE % ROW_SIZE == 0
+assert ispow2(LINE_SIZE), "LINE_SIZE not power of 2"
+assert ispow2(NUM_LINES), "NUM_LINES not power of 2"
+assert ispow2(ROW_PER_LINE), "ROW_PER_LINE not power of 2"
+assert ispow2(INSN_PER_ROW), "INSN_PER_ROW not power of 2"
+assert (ROW_BITS == (INDEX_BITS + ROW_LINE_BITS)), \
+ "geometry bits don't add up"
+assert (LINE_OFF_BITS == (ROW_OFF_BITS + ROW_LINE_BITS)), \
+ "geometry bits don't add up"
+assert (REAL_ADDR_BITS == (TAG_BITS + INDEX_BITS + LINE_OFF_BITS)), \
+ "geometry bits don't add up"
+assert (REAL_ADDR_BITS == (TAG_BITS + ROW_BITS + ROW_OFF_BITS)), \
+ "geometry bits don't add up"
+
+# Example of layout for 32 lines of 64 bytes:
+#
+# .. tag |index| line |
+# .. | row | |
+# .. | | | |00| zero (2)
+# .. | | |-| | INSN_BITS (1)
+# .. | |---| | ROW_LINE_BITS (3)
+# .. | |--- - --| LINE_OFF_BITS (6)
+# .. | |- --| ROW_OFF_BITS (3)
+# .. |----- ---| | ROW_BITS (8)
+# .. |-----| | INDEX_BITS (5)
+# .. --------| | TAG_BITS (53)
+
+# The cache data BRAM organized as described above for each way
#subtype cache_row_t is std_ulogic_vector(ROW_SIZE_BITS-1 downto 0);
#
-#-- The cache tags LUTRAM has a row per set. Vivado is a pain and will
-#-- not handle a clean (commented) definition of the cache tags as a 3d
-#-- memory. For now, work around it by putting all the tags
-#subtype cache_tag_t is std_logic_vector(TAG_BITS-1 downto 0);
-# type cache_tags_set_t is array(way_t) of cache_tag_t;
-# type cache_tags_array_t is array(index_t) of cache_tags_set_t;
-#constant TAG_RAM_WIDTH : natural := TAG_BITS * NUM_WAYS;
-#subtype cache_tags_set_t is std_logic_vector(TAG_RAM_WIDTH-1 downto 0);
-#type cache_tags_array_t is array(index_t) of cache_tags_set_t;
+# The cache tags LUTRAM has a row per set. Vivado is a pain and will
+# not handle a clean (commented) definition of the cache tags as a 3d
+# memory. For now, work around it by putting all the tags
def CacheTagArray():
return Array(Signal(TAG_RAM_WIDTH, name="cachetag_%d" %x) \
for x in range(NUM_LINES))
-#-- The cache valid bits
-#subtype cache_way_valids_t is std_ulogic_vector(NUM_WAYS-1 downto 0);
-#type cache_valids_t is array(index_t) of cache_way_valids_t;
-#type row_per_line_valid_t is array(0 to ROW_PER_LINE - 1) of std_ulogic;
+# The cache valid bits
def CacheValidBitsArray():
return Array(Signal(NUM_WAYS, name="cachevalid_%d" %x) \
for x in range(NUM_LINES))
for x in range(ROW_PER_LINE))
-#attribute ram_style : string;
-#attribute ram_style of cache_tags : signal is "distributed";
- # TODO to be passed to nigmen as ram attributes
- # attribute ram_style : string;
- # attribute ram_style of cache_tags : signal is "distributed";
+# TODO to be passed to nigmen as ram attributes
+# attribute ram_style : string;
+# attribute ram_style of cache_tags : signal is "distributed";
-#subtype tlb_index_t is integer range 0 to TLB_SIZE - 1;
-#type tlb_valids_t is array(tlb_index_t) of std_ulogic;
-#subtype tlb_tag_t is std_ulogic_vector(TLB_EA_TAG_BITS - 1 downto 0);
-#type tlb_tags_t is array(tlb_index_t) of tlb_tag_t;
-#subtype tlb_pte_t is std_ulogic_vector(TLB_PTE_BITS - 1 downto 0);
-#type tlb_ptes_t is array(tlb_index_t) of tlb_pte_t;
def TLBValidBitsArray():
return Array(Signal(name="tlbvalid_%d" %x) \
for x in range(TLB_SIZE))
return Array(Signal(TLB_PTE_BITS, name="tlbptes_%d" %x) \
for x in range(TLB_SIZE))
-
-#-- Cache RAM interface
-#type cache_ram_out_t is array(way_t) of cache_row_t;
# Cache RAM interface
def CacheRamOut():
return Array(Signal(ROW_SIZE_BITS, name="cache_out_%d" %x) \
for x in range(NUM_WAYS))
-#-- PLRU output interface
-#type plru_out_t is array(index_t) of
-# std_ulogic_vector(WAY_BITS-1 downto 0);
# PLRU output interface
def PLRUOut():
return Array(Signal(WAY_BITS, name="plru_out_%d" %x) \
for x in range(NUM_LINES))
-# -- Return the cache line index (tag index) for an address
-# function get_index(addr: std_ulogic_vector(63 downto 0))
-# return index_t is
-# begin
-# return to_integer(unsigned(
-# addr(SET_SIZE_BITS - 1 downto LINE_OFF_BITS)
-# ));
-# end;
# Return the cache line index (tag index) for an address
def get_index(addr):
return addr[LINE_OFF_BITS:SET_SIZE_BITS]
-# -- Return the cache row index (data memory) for an address
-# function get_row(addr: std_ulogic_vector(63 downto 0))
-# return row_t is
-# begin
-# return to_integer(unsigned(
-# addr(SET_SIZE_BITS - 1 downto ROW_OFF_BITS)
-# ));
-# end;
# Return the cache row index (data memory) for an address
def get_row(addr):
return addr[ROW_OFF_BITS:SET_SIZE_BITS]
-# -- Return the index of a row within a line
-# function get_row_of_line(row: row_t) return row_in_line_t is
-# variable row_v : unsigned(ROW_BITS-1 downto 0);
-# begin
-# row_v := to_unsigned(row, ROW_BITS);
-# return row_v(ROW_LINEBITS-1 downto 0);
-# end;
# Return the index of a row within a line
def get_row_of_line(row):
- return row[:ROW_LINEBITS]
-
-# -- Returns whether this is the last row of a line
-# function is_last_row_addr(addr: wishbone_addr_type;
-# last: row_in_line_t
-# )
-# return boolean is
-# begin
-# return unsigned(
-# addr(LINE_OFF_BITS-1 downto ROW_OFF_BITS)
-# ) = last;
-# end;
+ return row[:ROW_LINE_BITS]
+
# Returns whether this is the last row of a line
def is_last_row_addr(addr, last):
return addr[ROW_OFF_BITS:LINE_OFF_BITS] == last
-# -- Returns whether this is the last row of a line
-# function is_last_row(row: row_t;
-# last: row_in_line_t) return boolean is
-# begin
-# return get_row_of_line(row) = last;
-# end;
# Returns whether this is the last row of a line
def is_last_row(row, last):
return get_row_of_line(row) == last
-# -- Return the next row in the current cache line. We use a dedicated
-# -- function in order to limit the size of the generated adder to be
-# -- only the bits within a cache line (3 bits with default settings)
-# function next_row(row: row_t) return row_t is
-# variable row_v : std_ulogic_vector(ROW_BITS-1 downto 0);
-# variable row_idx : std_ulogic_vector(ROW_LINEBITS-1 downto 0);
-# variable result : std_ulogic_vector(ROW_BITS-1 downto 0);
-# begin
-# row_v := std_ulogic_vector(to_unsigned(row, ROW_BITS));
-# row_idx := row_v(ROW_LINEBITS-1 downto 0);
-# row_v(ROW_LINEBITS-1 downto 0) :=
-# std_ulogic_vector(unsigned(row_idx) + 1);
-# return to_integer(unsigned(row_v));
-# end;
# Return the next row in the current cache line. We use a dedicated
# function in order to limit the size of the generated adder to be
# only the bits within a cache line (3 bits with default settings)
def next_row(row):
- row_v = row[0:ROW_LINEBITS] + 1
- return Cat(row_v[:ROW_LINEBITS], row[ROW_LINEBITS:])
-# -- Read the instruction word for the given address in the
-# -- current cache row
-# function read_insn_word(addr: std_ulogic_vector(63 downto 0);
-# data: cache_row_t) return std_ulogic_vector is
-# variable word: integer range 0 to INSN_PER_ROW-1;
-# begin
-# word := to_integer(unsigned(addr(INSN_BITS+2-1 downto 2)));
-# return data(31+word*32 downto word*32);
-# end;
+ row_v = row[0:ROW_LINE_BITS] + 1
+ return Cat(row_v[:ROW_LINE_BITS], row[ROW_LINE_BITS:])
+
# Read the instruction word for the given address
# in the current cache row
def read_insn_word(addr, data):
word = addr[2:INSN_BITS+2]
return data.word_select(word, 32)
-# -- Get the tag value from the address
-# function get_tag(
-# addr: std_ulogic_vector(REAL_ADDR_BITS - 1 downto 0)
-# )
-# return cache_tag_t is
-# begin
-# return addr(REAL_ADDR_BITS - 1 downto SET_SIZE_BITS);
-# end;
# Get the tag value from the address
def get_tag(addr):
return addr[SET_SIZE_BITS:REAL_ADDR_BITS]
-# -- Read a tag from a tag memory row
-# function read_tag(way: way_t; tagset: cache_tags_set_t)
-# return cache_tag_t is
-# begin
-# return tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS);
-# end;
# Read a tag from a tag memory row
def read_tag(way, tagset):
return tagset.word_select(way, TAG_BITS)
-# -- Write a tag to tag memory row
-# procedure write_tag(way: in way_t;
-# tagset: inout cache_tags_set_t; tag: cache_tag_t) is
-# begin
-# tagset((way+1) * TAG_BITS - 1 downto way * TAG_BITS) := tag;
-# end;
# Write a tag to tag memory row
def write_tag(way, tagset, tag):
return read_tag(way, tagset).eq(tag)
-# -- Simple hash for direct-mapped TLB index
-# function hash_ea(addr: std_ulogic_vector(63 downto 0))
-# return tlb_index_t is
-# variable hash : std_ulogic_vector(TLB_BITS - 1 downto 0);
-# begin
-# hash := addr(TLB_LG_PGSZ + TLB_BITS - 1 downto TLB_LG_PGSZ)
-# xor addr(
-# TLB_LG_PGSZ + 2 * TLB_BITS - 1 downto
-# TLB_LG_PGSZ + TLB_BITS
-# )
-# xor addr(
-# TLB_LG_PGSZ + 3 * TLB_BITS - 1 downto
-# TLB_LG_PGSZ + 2 * TLB_BITS
-# );
-# return to_integer(unsigned(hash));
-# end;
# Simple hash for direct-mapped TLB index
def hash_ea(addr):
hsh = addr[TLB_LG_PGSZ:TLB_LG_PGSZ + TLB_BITS] ^ addr[
]
return hsh
-# begin
-#
-# XXX put these assert statements in - as python asserts
-#
-# assert LINE_SIZE mod ROW_SIZE = 0;
-# assert ispow2(LINE_SIZE) report "LINE_SIZE not power of 2"
-# assert ispow2(NUM_LINES) report "NUM_LINES not power of 2"
-# assert ispow2(ROW_PER_LINE) report "ROW_PER_LINE not power of 2"
-# assert ispow2(INSN_PER_ROW) report "INSN_PER_ROW not power of 2"
-# assert (ROW_BITS = INDEX_BITS + ROW_LINEBITS)
-# report "geometry bits don't add up"
-# assert (LINE_OFF_BITS = ROW_OFF_BITS + ROW_LINEBITS)
-# report "geometry bits don't add up"
-# assert (REAL_ADDR_BITS = TAG_BITS + INDEX_BITS + LINE_OFF_BITS)
-# report "geometry bits don't add up"
-# assert (REAL_ADDR_BITS = TAG_BITS + ROW_BITS + ROW_OFF_BITS)
-# report "geometry bits don't add up"
-#
-# sim_debug: if SIM generate
-# debug: process
-# begin
-# report "ROW_SIZE = " & natural'image(ROW_SIZE);
-# report "ROW_PER_LINE = " & natural'image(ROW_PER_LINE);
-# report "BRAM_ROWS = " & natural'image(BRAM_ROWS);
-# report "INSN_PER_ROW = " & natural'image(INSN_PER_ROW);
-# report "INSN_BITS = " & natural'image(INSN_BITS);
-# report "ROW_BITS = " & natural'image(ROW_BITS);
-# report "ROW_LINEBITS = " & natural'image(ROW_LINEBITS);
-# report "LINE_OFF_BITS = " & natural'image(LINE_OFF_BITS);
-# report "ROW_OFF_BITS = " & natural'image(ROW_OFF_BITS);
-# report "INDEX_BITS = " & natural'image(INDEX_BITS);
-# report "TAG_BITS = " & natural'image(TAG_BITS);
-# report "WAY_BITS = " & natural'image(WAY_BITS);
-# wait;
-# end process;
-# end generate;
# Cache reload state machine
@unique
self.store_row = Signal(BRAM_ROWS)
self.store_tag = Signal(TAG_BITS)
self.store_valid = Signal()
- self.end_row_ix = Signal(ROW_LINEBITS)
+ self.end_row_ix = Signal(ROW_LINE_BITS)
self.rows_valid = RowPerLineValidArray()
# TLB miss state
self.fetch_failed = Signal()
-# -- 64 bit direct mapped icache. All instructions are 4B aligned.
-#
-# entity icache is
-# generic (
-# SIM : boolean := false;
-# -- Line size in bytes
-# LINE_SIZE : positive := 64;
-# -- BRAM organisation: We never access more
-# -- than wishbone_data_bits
-# -- at a time so to save resources we make the
-# -- array only that wide,
-# -- and use consecutive indices for to make a cache "line"
-# --
-# -- ROW_SIZE is the width in bytes of the BRAM (based on WB,
-# -- so 64-bits)
-# ROW_SIZE : positive := wishbone_data_bits / 8;
-# -- Number of lines in a set
-# NUM_LINES : positive := 32;
-# -- Number of ways
-# NUM_WAYS : positive := 4;
-# -- L1 ITLB number of entries (direct mapped)
-# TLB_SIZE : positive := 64;
-# -- L1 ITLB log_2(page_size)
-# TLB_LG_PGSZ : positive := 12;
-# -- Number of real address bits that we store
-# REAL_ADDR_BITS : positive := 56;
-# -- Non-zero to enable log data collection
-# LOG_LENGTH : natural := 0
-# );
-# port (
-# clk : in std_ulogic;
-# rst : in std_ulogic;
-#
-# i_in : in Fetch1ToIcacheType;
-# i_out : out IcacheToDecode1Type;
-#
-# m_in : in MmuToIcacheType;
-#
-# stall_in : in std_ulogic;
-# stall_out : out std_ulogic;
-# flush_in : in std_ulogic;
-# inval_in : in std_ulogic;
-#
-# wishbone_out : out wishbone_master_out;
-# wishbone_in : in wishbone_slave_out;
-#
-# log_out : out std_ulogic_vector(53 downto 0)
-# );
-# end entity icache;
-# 64 bit direct mapped icache. All instructions are 4B aligned.
+
class ICache(Elaboratable):
"""64 bit direct mapped icache. All instructions are 4B aligned."""
def __init__(self):
# Generate a cache RAM for each way
- def rams(self, m, r, cache_out_row, use_previous, replace_way, req_row):
+ def rams(self, m, r, cache_out_row, use_previous,
+ replace_way, req_row):
+
comb = m.d.comb
sync = m.d.sync
comb += wr_addr.eq(r.store_row)
comb += wr_sel.eq(Repl(do_write, ROW_SIZE))
- # -- Generate PLRUs
+ # Generate PLRUs
def maybe_plrus(self, m, r, plru_victim):
comb = m.d.comb
def itlb_lookup(self, m, tlb_req_index, itlb_ptes, itlb_tags,
real_addr, itlb_valid_bits, ra_valid, eaa_priv,
priv_fault, access_ok):
+
comb = m.d.comb
i_in = self.i_in
# Cache hit detection, output to fetch2 and other misc logic
def icache_comb(self, m, use_previous, r, req_index, req_row,
- req_tag, real_addr, req_laddr, cache_valid_bits,
- cache_tags, access_ok, req_is_hit,
- req_is_miss, replace_way, plru_victim, cache_out_row):
- comb = m.d.comb
+ req_hit_way, req_tag, real_addr, req_laddr,
+ cache_valid_bits, cache_tags, access_ok,
+ req_is_hit, req_is_miss, replace_way,
+ plru_victim, cache_out_row):
- #comb += Display("ENTER icache_comb - use_previous:%x req_index:%x "
- # "req_row:%x req_tag:%x real_addr:%x req_laddr:%x "
- # "access_ok:%x req_is_hit:%x req_is_miss:%x "
- # "replace_way:%x", use_previous, req_index, req_row,
- # req_tag, real_addr, req_laddr, access_ok,
- # req_is_hit, req_is_miss, replace_way)
+ comb = m.d.comb
i_in, i_out, wb_out = self.i_in, self.i_out, self.wb_out
flush_in, stall_out = self.flush_in, self.stall_out
# Test if pending request is a hit on any way
hitcond = Signal()
comb += hitcond.eq((r.state == State.WAIT_ACK)
- & (req_index == r.store_index)
- & r.rows_valid[req_row % ROW_PER_LINE])
+ & (req_index == r.store_index)
+ & r.rows_valid[req_row % ROW_PER_LINE]
+ )
with m.If(i_in.req):
cvb = Signal(NUM_WAYS)
ctag = Signal(TAG_RAM_WIDTH)
comb += ctag.eq(cache_tags[req_index])
comb += cvb.eq(cache_valid_bits[req_index])
for i in range(NUM_WAYS):
- tagi = Signal(TAG_BITS, name="ti%d" % i)
+ tagi = Signal(TAG_BITS, name="tag_i%d" % i)
comb += tagi.eq(read_tag(i, ctag))
hit_test = Signal(name="hit_test%d" % i)
comb += hit_test.eq(i == r.store_way)
- with m.If((cvb[i] | (hitcond & hit_test)) & (tagi == req_tag)):
+ with m.If((cvb[i] | (hitcond & hit_test))
+ & (tagi == req_tag)):
comb += hit_way.eq(i)
comb += is_hit.eq(1)
comb += req_is_hit.eq(is_hit)
comb += req_is_miss.eq(~is_hit)
+ with m.Else():
+ comb += req_is_hit.eq(0)
+ comb += req_is_miss.eq(0)
+
+ comb += req_hit_way.eq(hit_way)
+
# The way to replace on a miss
with m.If(r.state == State.CLR_TAG):
comb += replace_way.eq(plru_victim[r.store_index])
# be output an entire row which I prefer not to do just yet
# as it would force fetch2 to know about some of the cache
# geometry information.
- #comb += Display("BEFORE read_insn_word - r.hit_nia:%x " \
- # "r.hit_way:%x, cache_out[r.hit_way]:%x", r.hit_nia, \
- # r.hit_way, cache_out[r.hit_way])
comb += i_out.insn.eq(read_insn_word(r.hit_nia, cache_out_row))
comb += i_out.valid.eq(r.hit_valid)
comb += i_out.nia.eq(r.hit_nia)
with m.If(req_is_hit):
sync += r.hit_way.eq(req_hit_way)
- sync += Display("cache hit nia:%x IR:%x SM:%x idx:%x " \
- "tag:%x way:%x RA:%x", i_in.nia, \
- i_in.virt_mode, i_in.stop_mark, req_index, \
- req_tag, req_hit_way, real_addr)
+ sync += Display(
+ "cache hit nia:%x IR:%x SM:%x idx:%x tag:%x " \
+ "way:%x RA:%x", i_in.nia, i_in.virt_mode, \
+ i_in.stop_mark, req_index, req_tag, \
+ req_hit_way, real_addr
+ )
sync += r.hit_smark.eq(i_in.stop_mark)
sync += r.hit_nia.eq(i_in.nia)
+ def icache_miss_idle(self, m, r, req_is_miss, req_laddr,
+ req_index, req_tag, replace_way, real_addr):
+ comb = m.d.comb
+ sync = m.d.sync
+
+ i_in = self.i_in
+
+ # Reset per-row valid flags, only used in WAIT_ACK
+ for i in range(ROW_PER_LINE):
+ sync += r.rows_valid[i].eq(0)
+
+ # We need to read a cache line
+ with m.If(req_is_miss):
+ sync += Display(
+ "cache miss nia:%x IR:%x SM:%x idx:%x "
+ " way:%x tag:%x RA:%x", i_in.nia,
+ i_in.virt_mode, i_in.stop_mark, req_index,
+ replace_way, req_tag, real_addr
+ )
+
+ # Keep track of our index and way for subsequent stores
+ st_row = Signal(BRAM_ROWS)
+ comb += st_row.eq(get_row(req_laddr))
+ sync += r.store_index.eq(req_index)
+ sync += r.store_row.eq(st_row)
+ sync += r.store_tag.eq(req_tag)
+ sync += r.store_valid.eq(1)
+ sync += r.end_row_ix.eq(get_row_of_line(st_row) - 1)
+
+ # Prep for first wishbone read. We calculate the address
+ # of the start of the cache line and start the WB cycle.
+ sync += r.req_adr.eq(req_laddr)
+ sync += r.wb.cyc.eq(1)
+ sync += r.wb.stb.eq(1)
+
+ # Track that we had one request sent
+ sync += r.state.eq(State.CLR_TAG)
+
+ def icache_miss_clr_tag(self, m, r, replace_way,
+ cache_valid_bits, req_index,
+ tagset, cache_tags):
+
+ comb = m.d.comb
+ sync = m.d.sync
+
+ # Get victim way from plru
+ sync += r.store_way.eq(replace_way)
+ # Force misses on that way while reloading that line
+ cv = Signal(INDEX_BITS)
+ comb += cv.eq(cache_valid_bits[req_index])
+ comb += cv.bit_select(replace_way, 1).eq(0)
+ sync += cache_valid_bits[req_index].eq(cv)
+
+ for i in range(NUM_WAYS):
+ with m.If(i == replace_way):
+ comb += tagset.eq(cache_tags[r.store_index])
+ comb += write_tag(i, tagset, r.store_tag)
+ sync += cache_tags[r.store_index].eq(tagset)
+
+ sync += r.state.eq(State.WAIT_ACK)
+
+ def icache_miss_wait_ack(self, m, r, replace_way, inval_in,
+ stbs_done, cache_valid_bits):
+ comb = m.d.comb
+ sync = m.d.sync
+
+ wb_in = self.wb_in
+
+ # Requests are all sent if stb is 0
+ stbs_zero = Signal()
+ comb += stbs_zero.eq(r.wb.stb == 0)
+ comb += stbs_done.eq(stbs_zero)
+
+ # If we are still sending requests, was one accepted?
+ with m.If(~wb_in.stall & ~stbs_zero):
+ # That was the last word? We are done sending.
+ # Clear stb and set stbs_done so we can handle
+ # an eventual last ack on the same cycle.
+ with m.If(is_last_row_addr(r.req_adr, r.end_row_ix)):
+ sync += Display(
+ "IS_LAST_ROW_ADDR r.wb.addr:%x " \
+ "r.end_row_ix:%x r.wb.stb:%x stbs_zero:%x " \
+ "stbs_done:%x", r.wb.adr, r.end_row_ix,
+ r.wb.stb, stbs_zero, stbs_done
+ )
+ sync += r.wb.stb.eq(0)
+ comb += stbs_done.eq(1)
+
+ # Calculate the next row address
+ rarange = Signal(LINE_OFF_BITS - ROW_OFF_BITS)
+ comb += rarange.eq(
+ r.req_adr[ROW_OFF_BITS:LINE_OFF_BITS] + 1
+ )
+ sync += r.req_adr[ROW_OFF_BITS:LINE_OFF_BITS].eq(
+ rarange
+ )
+ sync += Display("RARANGE r.req_adr:%x rarange:%x "
+ "stbs_zero:%x stbs_done:%x",
+ r.req_adr, rarange, stbs_zero, stbs_done)
+
+ # Incoming acks processing
+ with m.If(wb_in.ack):
+ sync += Display("WB_IN_ACK data:%x stbs_zero:%x "
+ "stbs_done:%x",
+ wb_in.dat, stbs_zero, stbs_done)
+
+ sync += r.rows_valid[r.store_row % ROW_PER_LINE].eq(1)
+
+ # Check for completion
+ with m.If(stbs_done &
+ is_last_row(r.store_row, r.end_row_ix)):
+ # Complete wishbone cycle
+ sync += r.wb.cyc.eq(0)
+ # be nice, clear addr
+ sync += r.req_adr.eq(0)
+
+ # Cache line is now valid
+ cv = Signal(INDEX_BITS)
+ comb += cv.eq(cache_valid_bits[r.store_index])
+ comb += cv.bit_select(replace_way, 1).eq(
+ r.store_valid & ~inval_in
+ )
+ sync += cache_valid_bits[r.store_index].eq(cv)
+
+ sync += r.state.eq(State.IDLE)
+
+ # not completed, move on to next request in row
+ with m.Else():
+ # Increment store row counter
+ sync += r.store_row.eq(next_row(r.store_row))
+
+
# Cache miss/reload synchronous machine
def icache_miss(self, m, cache_valid_bits, r, req_is_miss,
req_index, req_laddr, req_tag, replace_way,
stall_in, flush_in = self.stall_in, self.flush_in
inval_in = self.inval_in
-# variable tagset : cache_tags_set_t;
-# variable stbs_done : boolean;
-
tagset = Signal(TAG_RAM_WIDTH)
stbs_done = Signal()
with m.Switch(r.state):
with m.Case(State.IDLE):
- # Reset per-row valid flags,
- # only used in WAIT_ACK
- for i in range(ROW_PER_LINE):
- sync += r.rows_valid[i].eq(0)
-
- # We need to read a cache line
- with m.If(req_is_miss):
- sync += Display("cache miss nia:%x IR:%x SM:%x idx:%x "
- " way:%x tag:%x RA:%x", i_in.nia,
- i_in.virt_mode, i_in.stop_mark, req_index,
- replace_way, req_tag, real_addr)
-
- # Keep track of our index and way
- # for subsequent stores
- st_row = Signal(BRAM_ROWS)
- comb += st_row.eq(get_row(req_laddr))
- sync += r.store_index.eq(req_index)
- sync += r.store_row.eq(st_row)
- sync += r.store_tag.eq(req_tag)
- sync += r.store_valid.eq(1)
- sync += r.end_row_ix.eq(get_row_of_line(st_row) - 1)
-
- # Prep for first wishbone read. We calculate the
- # address of the start of the cache line and
- # start the WB cycle.
- sync += r.req_adr.eq(req_laddr)
- sync += r.wb.cyc.eq(1)
- sync += r.wb.stb.eq(1)
-
- # Track that we had one request sent
- sync += r.state.eq(State.CLR_TAG)
+ self.icache_miss_idle(
+ m, r, req_is_miss, req_laddr,
+ req_index, req_tag, replace_way,
+ real_addr
+ )
with m.Case(State.CLR_TAG, State.WAIT_ACK):
with m.If(r.state == State.CLR_TAG):
- # Get victim way from plru
- sync += r.store_way.eq(replace_way)
- # Force misses on that way while reloading that line
- cv = Signal(INDEX_BITS)
- comb += cv.eq(cache_valid_bits[req_index])
- comb += cv.bit_select(replace_way, 1).eq(0)
- sync += cache_valid_bits[req_index].eq(cv)
-
- for i in range(NUM_WAYS):
- with m.If(i == replace_way):
- comb += tagset.eq(cache_tags[r.store_index])
- comb += write_tag(i, tagset, r.store_tag)
- sync += cache_tags[r.store_index].eq(tagset)
-
- sync += r.state.eq(State.WAIT_ACK)
-
- # Requests are all sent if stb is 0
- stbs_zero = Signal()
- comb += stbs_zero.eq(r.wb.stb == 0)
- comb += stbs_done.eq(stbs_zero)
-
- # If we are still sending requests, was one accepted?
- with m.If(~wb_in.stall & ~stbs_zero):
- # That was the last word ? # We are done sending.
- # Clear stb and set stbs_done # so we can handle
- # an eventual last ack on # the same cycle.
- with m.If(is_last_row_addr(r.req_adr, r.end_row_ix)):
- sync += Display("IS_LAST_ROW_ADDR " \
- "r.wb.addr:%x r.end_row_ix:%x " \
- "r.wb.stb:%x stbs_zero:%x " \
- "stbs_done:%x", r.wb.adr, \
- r.end_row_ix, r.wb.stb, \
- stbs_zero, stbs_done)
- sync += r.wb.stb.eq(0)
- comb += stbs_done.eq(1)
-
- # Incoming acks processing
- with m.If(wb_in.ack):
- sync += Display("WB_IN_ACK data:%x stbs_zero:%x "
- "stbs_done:%x",
- wb_in.dat, stbs_zero, stbs_done)
-
- sync += r.rows_valid[r.store_row % ROW_PER_LINE].eq(1)
-
- # Check for completion
- with m.If(stbs_done &
- is_last_row(r.store_row, r.end_row_ix)):
- # Complete wishbone cycle
- sync += r.wb.cyc.eq(0)
- sync += r.req_adr.eq(0) # be nice, clear addr
-
- # Cache line is now valid
- cv = Signal(INDEX_BITS)
- comb += cv.eq(cache_valid_bits[r.store_index])
- comb += cv.bit_select(replace_way, 1).eq(
- r.store_valid & ~inval_in
- )
- sync += cache_valid_bits[r.store_index].eq(cv)
-
- sync += r.state.eq(State.IDLE)
-
- # not completed, move on to next request in row
- with m.Else():
- # Increment store row counter
- sync += r.store_row.eq(next_row(r.store_row))
-
- # Calculate the next row address
- rarange = Signal(LINE_OFF_BITS - ROW_OFF_BITS)
- comb += rarange.eq(
- r.req_adr[ROW_OFF_BITS:LINE_OFF_BITS] + 1
- )
- sync += r.req_adr[ROW_OFF_BITS:LINE_OFF_BITS].eq(
- rarange
- )
- sync += Display("RARANGE r.req_adr:%x rarange:%x "
- "stbs_zero:%x stbs_done:%x",
- r.req_adr, rarange,
- stbs_zero, stbs_done)
+ self.icache_miss_clr_tag(
+ m, r, replace_way,
+ cache_valid_bits, req_index,
+ tagset, cache_tags
+ )
+ self.icache_miss_wait_ack(
+ m, r, replace_way, inval_in,
+ stbs_done, cache_valid_bits
+ )
# TLB miss and protection fault processing
with m.If(flush_in | m_in.tlbld):
with m.Elif(i_in.req & ~access_ok & ~stall_in):
sync += r.fetch_failed.eq(1)
- # icache_log: if LOG_LENGTH > 0 generate
+ # icache_log: if LOG_LENGTH > 0 generate
def icache_log(self, m, req_hit_way, ra_valid, access_ok,
req_is_miss, req_is_hit, lway, wstate, r):
comb = m.d.comb
wb_in, i_out = self.wb_in, self.i_out
log_out, stall_out = self.log_out, self.stall_out
-# -- Output data to logger
-# signal log_data : std_ulogic_vector(53 downto 0);
-# begin
-# data_log: process(clk)
-# variable lway: way_t;
-# variable wstate: std_ulogic;
# Output data to logger
for i in range(LOG_LENGTH):
- # Output data to logger
log_data = Signal(54)
lway = Signal(NUM_WAYS)
wstate = Signal()
-# begin
-# if rising_edge(clk) then
-# lway := req_hit_way;
-# wstate := '0';
sync += lway.eq(req_hit_way)
sync += wstate.eq(0)
-# if r.state /= IDLE then
-# wstate := '1';
-# end if;
with m.If(r.state != State.IDLE):
sync += wstate.eq(1)
-# log_data <= i_out.valid &
-# i_out.insn &
-# wishbone_in.ack &
-# r.wb.adr(5 downto 3) &
-# r.wb.stb & r.wb.cyc &
-# wishbone_in.stall &
-# stall_out &
-# r.fetch_failed &
-# r.hit_nia(5 downto 2) &
-# wstate &
-# std_ulogic_vector(to_unsigned(lway, 3)) &
-# req_is_hit & req_is_miss &
-# access_ok &
-# ra_valid;
sync += log_data.eq(Cat(
ra_valid, access_ok, req_is_miss, req_is_hit,
- lway, wstate, r.hit_nia[2:6],
- r.fetch_failed, stall_out, wb_in.stall, r.wb.cyc,
- r.wb.stb, r.wb.adr[3:6], wb_in.ack, i_out.insn,
- i_out.valid
+ lway, wstate, r.hit_nia[2:6], r.fetch_failed,
+ stall_out, wb_in.stall, r.wb.cyc, r.wb.stb,
+ r.real_addr[3:6], wb_in.ack, i_out.insn, i_out.valid
))
-# end if;
-# end process;
-# log_out <= log_data;
comb += log_out.eq(log_data)
-# end generate;
-# end;
def elaborate(self, platform):
cache_tags = CacheTagArray()
cache_valid_bits = CacheValidBitsArray()
-# signal itlb_valids : tlb_valids_t;
-# signal itlb_tags : tlb_tags_t;
-# signal itlb_ptes : tlb_ptes_t;
-# attribute ram_style of itlb_tags : signal is "distributed";
-# attribute ram_style of itlb_ptes : signal is "distributed";
itlb_valid_bits = TLBValidBitsArray()
itlb_tags = TLBTagArray()
itlb_ptes = TLBPtesArray()
# attribute ram_style of itlb_tags : signal is "distributed";
# attribute ram_style of itlb_ptes : signal is "distributed";
-# -- Privilege bit from PTE EAA field
-# signal eaa_priv : std_ulogic;
# Privilege bit from PTE EAA field
eaa_priv = Signal()
-# signal r : reg_internal_t;
r = RegInternal()
-# -- Async signals on incoming request
-# signal req_index : index_t;
-# signal req_row : row_t;
-# signal req_hit_way : way_t;
-# signal req_tag : cache_tag_t;
-# signal req_is_hit : std_ulogic;
-# signal req_is_miss : std_ulogic;
-# signal req_laddr : std_ulogic_vector(63 downto 0);
# Async signal on incoming request
req_index = Signal(NUM_LINES)
req_row = Signal(BRAM_ROWS)
req_is_miss = Signal()
req_laddr = Signal(64)
-# signal tlb_req_index : tlb_index_t;
-# signal real_addr : std_ulogic_vector(
-# REAL_ADDR_BITS - 1 downto 0
-# );
-# signal ra_valid : std_ulogic;
-# signal priv_fault : std_ulogic;
-# signal access_ok : std_ulogic;
-# signal use_previous : std_ulogic;
tlb_req_index = Signal(TLB_SIZE)
real_addr = Signal(REAL_ADDR_BITS)
ra_valid = Signal()
access_ok = Signal()
use_previous = Signal()
-# signal cache_out : cache_ram_out_t;
cache_out_row = Signal(ROW_SIZE_BITS)
-# signal plru_victim : plru_out_t;
-# signal replace_way : way_t;
plru_victim = PLRUOut()
replace_way = Signal(NUM_WAYS)
- # call sub-functions putting everything together, using shared
- # signals established above
+ # call sub-functions putting everything together,
+ # using shared signals established above
self.rams(m, r, cache_out_row, use_previous, replace_way, req_row)
self.maybe_plrus(m, r, plru_victim)
- self.itlb_lookup(m, tlb_req_index, itlb_ptes, itlb_tags,
- real_addr, itlb_valid_bits, ra_valid, eaa_priv,
- priv_fault, access_ok)
+ self.itlb_lookup(m, tlb_req_index, itlb_ptes, itlb_tags, real_addr,
+ itlb_valid_bits, ra_valid, eaa_priv, priv_fault,
+ access_ok)
self.itlb_update(m, itlb_valid_bits, itlb_tags, itlb_ptes)
- self.icache_comb(m, use_previous, r, req_index, req_row,
+ self.icache_comb(m, use_previous, r, req_index, req_row, req_hit_way,
req_tag, real_addr, req_laddr, cache_valid_bits,
cache_tags, access_ok, req_is_hit, req_is_miss,
replace_way, plru_victim, cache_out_row)
return m
-# icache_tb.vhdl
-#
-# library ieee;
-# use ieee.std_logic_1164.all;
-#
-# library work;
-# use work.common.all;
-# use work.wishbone_types.all;
-#
-# entity icache_tb is
-# end icache_tb;
-#
-# architecture behave of icache_tb is
-# signal clk : std_ulogic;
-# signal rst : std_ulogic;
-#
-# signal i_out : Fetch1ToIcacheType;
-# signal i_in : IcacheToDecode1Type;
-#
-# signal m_out : MmuToIcacheType;
-#
-# signal wb_bram_in : wishbone_master_out;
-# signal wb_bram_out : wishbone_slave_out;
-#
-# constant clk_period : time := 10 ns;
-# begin
-# icache0: entity work.icache
-# generic map(
-# LINE_SIZE => 64,
-# NUM_LINES => 4
-# )
-# port map(
-# clk => clk,
-# rst => rst,
-# i_in => i_out,
-# i_out => i_in,
-# m_in => m_out,
-# stall_in => '0',
-# flush_in => '0',
-# inval_in => '0',
-# wishbone_out => wb_bram_in,
-# wishbone_in => wb_bram_out
-# );
-#
-# -- BRAM Memory slave
-# bram0: entity work.wishbone_bram_wrapper
-# generic map(
-# MEMORY_SIZE => 1024,
-# RAM_INIT_FILE => "icache_test.bin"
-# )
-# port map(
-# clk => clk,
-# rst => rst,
-# wishbone_in => wb_bram_in,
-# wishbone_out => wb_bram_out
-# );
-#
-# clk_process: process
-# begin
-# clk <= '0';
-# wait for clk_period/2;
-# clk <= '1';
-# wait for clk_period/2;
-# end process;
-#
-# rst_process: process
-# begin
-# rst <= '1';
-# wait for 2*clk_period;
-# rst <= '0';
-# wait;
-# end process;
-#
-# stim: process
-# begin
-# i_out.req <= '0';
-# i_out.nia <= (others => '0');
-# i_out.stop_mark <= '0';
-#
-# m_out.tlbld <= '0';
-# m_out.tlbie <= '0';
-# m_out.addr <= (others => '0');
-# m_out.pte <= (others => '0');
-#
-# wait until rising_edge(clk);
-# wait until rising_edge(clk);
-# wait until rising_edge(clk);
-# wait until rising_edge(clk);
-#
-# i_out.req <= '1';
-# i_out.nia <= x"0000000000000004";
-#
-# wait for 30*clk_period;
-# wait until rising_edge(clk);
-#
-# assert i_in.valid = '1' severity failure;
-# assert i_in.insn = x"00000001"
-# report "insn @" & to_hstring(i_out.nia) &
-# "=" & to_hstring(i_in.insn) &
-# " expected 00000001"
-# severity failure;
-#
-# i_out.req <= '0';
-#
-# wait until rising_edge(clk);
-#
-# -- hit
-# i_out.req <= '1';
-# i_out.nia <= x"0000000000000008";
-# wait until rising_edge(clk);
-# wait until rising_edge(clk);
-# assert i_in.valid = '1' severity failure;
-# assert i_in.insn = x"00000002"
-# report "insn @" & to_hstring(i_out.nia) &
-# "=" & to_hstring(i_in.insn) &
-# " expected 00000002"
-# severity failure;
-# wait until rising_edge(clk);
-#
-# -- another miss
-# i_out.req <= '1';
-# i_out.nia <= x"0000000000000040";
-#
-# wait for 30*clk_period;
-# wait until rising_edge(clk);
-#
-# assert i_in.valid = '1' severity failure;
-# assert i_in.insn = x"00000010"
-# report "insn @" & to_hstring(i_out.nia) &
-# "=" & to_hstring(i_in.insn) &
-# " expected 00000010"
-# severity failure;
-#
-# -- test something that aliases
-# i_out.req <= '1';
-# i_out.nia <= x"0000000000000100";
-# wait until rising_edge(clk);
-# wait until rising_edge(clk);
-# assert i_in.valid = '0' severity failure;
-# wait until rising_edge(clk);
-#
-# wait for 30*clk_period;
-# wait until rising_edge(clk);
-#
-# assert i_in.valid = '1' severity failure;
-# assert i_in.insn = x"00000040"
-# report "insn @" & to_hstring(i_out.nia) &
-# "=" & to_hstring(i_in.insn) &
-# " expected 00000040"
-# severity failure;
-#
-# i_out.req <= '0';
-#
-# std.env.finish;
-# end process;
-# end;
def icache_sim(dut):
i_out = dut.i_in
i_in = dut.i_out
mem = []
for i in range(512):
- mem.append((i*2)| ((i*2+1)<<32))
+ mem.append((i*2) | ((i*2+1)<<32))
test_icache(mem)
projects / soc.git / blobdiff