i965: Enable MESA_shader_integer_functions on all GLSL 1.30 platforms

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Don't lower uaddCarry and usubBorrow in both GLSL IR and NIR

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Update assertion to account for Gen < 7

Previously SHADER_OPCODE_MULH could only exist on Gen7+, so the
assertion assumed the Gen7+ accumulator rules.  A future patch will
allow this instruction on at least Gen6, so update the assertion.

v2: Use get_lowered_simd_width instead of open coding it.  Suggested by
Curro.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]

i965: Use LZD to implement nir_op_find_lsb on Gen < 7

v2: Rebase on changes to previous two patches.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Use LZD to implement nir_op_ifind_msb on Gen < 7

v2: Retype LZD source as UD to avoid potential problems with 0x80000000.
Suggested by Matt.  Also update comment about problem values with
LZD(abs(x)).  Suggested by Curro.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Use LZD to implement nir_op_ufind_msb

This uses one less instruction.

v2: Move emit_find_msb_using_lzd out of the visitor classes.  Suggested
by Curro.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Always enable GL_ARB_shading_language_packing

With the existing lowering passes, the functions from this extension
become a bunch of bit twiddling operations that have always been
supported.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Move enable of EXT_shader_integer_mix

This extension does not depend on the Gen.  It only depends on the
availability of GLSL 1.30.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_bin_imul_high

This isn't the lowering pass you want.  Most GPUs that can support GLSL
1.30 have a multiply unit that can do something more interesting than
32x32->32.  Many have 32x16->48.  Any GPU that does, should do the
lowering in the backend.  This is just the thing that will always work.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_unop_find_msb

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_unop_find_lsb

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_unop_bitfield_reverse

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_quadop_bitfield_insert

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_triop_bitfield_extract

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: Add lowering pass for ir_unop_bit_count

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

MESA_shader_integer_functions: Allow new function overload matching rules

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

MESA_shader_integer_functions: Allow implicit int->uint conversions

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

MESA_shader_integer_functions: Expose new built-in functions

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

MESA_shader_integer_functions: Boiler plate extension tracking

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

MESA_shader_integer_functions: Add extension specification

v2: Fix typo in #extension line noticed by Ken.

v3: Update spec status.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

gm107/ir: make use of ADD32I for all immediates

ADD only allows to emit 19-bits immediates.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>

gm107/ir: add missing NEG modifier for IADD32I

Like FADD32I, the NEG modifier of src0 is at position 56.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

ddebug: Fix trivial typo in stderr message

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>

configure.ac: Use ${datarootdir} for --with-vulkan-icddir help string too

The help string wasn't updated in cbc37f7.

Fixes: cbc37f7 ("anv: install the intel_icd.json to ${datarootdir} by
default")

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: mesa-stable@lists.freedesktop.org

vl: fix memory leak

CovID: 1363008
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

vl: add entry point

Add entrypoint to distinguish H.264 decode and encode. For example, in patch
5/11 when is calling "VaCreateContext", "pps" and "sps" shouldn't be allocated
for H.264 encoding. So we need to use the entry_point to determine this is
H.264 decode or H.264 encode. We can use config to determine the entrypoint
since config_id is passed to us for VaCreateContext call. However, for
VaDestoyContext call, only context_id is passed to us. So we need to know the
entrypoint in order to not free the pps/sps for encoding case.

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

nv50,nvc0: srgb rendering is only available for rgba/bgra

Mark both L8_SRGB and L8A8_SRGB as non-renderable (the latter already
didn't have the bind flags). This makes the state tracker pick a
different format when rendering is required, or mark the fb as
incomplete. This fixes:

  bin/getteximage-formats init-by-clear-and-render -auto -fbo
  bin/getteximage-formats init-by-rendering -auto -fbo

which previously ran into srgb-encoding differences.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: mesa-stable@lists.freedesktop.org

nvc0: add support for BGRA8 images

This is useful for pbo downloads, which are now accelerated with images.
BGRA8 is a moderately common format to do that in.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

i965: Skip update_texture_surface when the plane doesn't exist

Thanks to rebase fail, recent surface state changes (commits 7e951cd56,
8521ce1a7, and 69c0dc5c53) effectively reverted 727a9b24933 and 367cf3a2e3e
which was unintentional.  This should bring it back.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

glsl: use linked shaders rather than compiled shaders

At this point there is no reason not to be using the linked shaders,
using the linked shaders should be faster and will make things simpler
for upcoming shader cache work.

The previous variable name suggests the linked shaders were intended
to be used here anyway.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

The extension is already exposed, this simply marks it as done.

Signed-off-by: Lars Hamre <chemecse@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

docs: Fix typo in extension name

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>

docs: Add support for GL_KHR_texture_compression_astc_sliced_3d

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>

Revert "docs: Mark KHR_texture_compression_astc_sliced_3d done on i965"

This reverts commit 82f8c239506ef126dcad266156f8945c62dc6bc9.

KHR_texture_compression_astc_sliced_3d is not a requirement for
GLES 3.2.

Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>\
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>

docs: Mark KHR_texture_compression_astc_sliced_3d done on i965

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

i965/gen9: Enable KHR_texture_compression_astc_sliced_3d

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

mesa: Add the infrastructure for KHR_texture_compression_astc_sliced_3d

V2: Drop the changes to gl.xml.

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

radeon/uvd: add session context buffer for polaris 10/11 v2

This way we have unlimited UVD sessions.

v2: only enable it when kernel supports it as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>

vl/dri3: fix a memory leak from front buffer

Inspired by fix for mem leak of vdpau interop, resource_from_handle
set texture reference count, that need to be decreased and released,
recall there is a similar case for DRI3, that is with VA-API glx
extension, there is temporary TFP(texture from pixmap), we target it
through dma-buf. leak happens when without count down the reference.

Checked and found with mpv vo=opengl case, there only one static TFP,
the leak happens once, but for totem player using gstreamer VA-API glx,
the dynamic TFP for each frame, so leak quite a bit.

This fixes mem leak for mpv and totem.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

i965/tes/scalar: fix 64-bit indirect input loads

We totally ignored this before because there were no piglit tests for
indirect loads in tessellation stages with doubles.

Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

i965/tcs/scalar: only update imm_offset for second message in 64bit input loads

Our indirect URB read messages take both a direct and an indirect offset
so when we emit the second message for a 64-bit input load we can just
always incremement the immediate offset, even for the indirect case.

Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

i965: Move pulls_bary setting to emit_pixel_interpolator_send().

pulls_bary should be set when the shader uses a pixel interpolator
message.  So, setting it from the function that emits pixel interpolator
messages makes a lot of sense.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

i965: Write gl_FragCoord directly to the destination.

This patch makes emit_general_interpolation take a destination register
as an argument, and write directly to that.  This is simpler than the
old approach of ralloc'ing a register, writing to that temporary, and
then making the caller emit per-component MOVs to copy it to the actual
destination.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

i965: Drop has_pln checks in unlit centroid workaround.

The unlit centroid workaround starts being necessary on Gen6, which
is the first platform with multisampling.  PLN exists on G45+, so all
platforms which need this workaround have PLN.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

i965: Drop VARYING_SLOT_FACE special case in barycentric setup.

glsl_to_nir always produces a system value for gl_FrontFacing, rather
than an input.  So there should never be an input with this slot,
making this code dead.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

compiler: Rename INTERP_QUALIFIER_* to INTERP_MODE_*.

Likewise, rename the enum type to glsl_interp_mode.

Beyond the GLSL front-end, talking about "interpolation modes" seems
more natural than "interpolation qualifiers" - in the IR, we're removed
from how exactly the source language specifies how to interpolate an
input.  Also, SPIR-V calls these "decorations" rather than "qualifiers".

Generated by:
$ find . -regextype egrep -regex '.*\.(c|cpp|h)' -type f -exec sed -i \
  -e 's/INTERP_QUALIFIER_/INTERP_MODE_/g' \
  -e 's/glsl_interp_qualifier/glsl_interp_mode/g' {} \;

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Dave Airlie <airlied@redhat.com>

virgl: drop pointless leftover init of virgl_transfer_inline_write.

Pointed out by Marek.

Signed-off-by: Dave Airlie <airlied@redhat.com>

nv50: fix alphatest for non-blendable formats

The hardware can only do alphatest when using a blendable format. This
means that the various *16 norm formats didn't work with alphatest. It
appears that Talos Principle uses such formats, as well as alpha tests,
for some internal renders, which made them be incorrect. However this
does not appear to affect the final renders, but in a different game it
easily could.

The approach we take is that when alphatests are enabled and a suitable
format is used (which we anticipate is the vast minority of the time),
we insert code into the shader to perform the comparison and discard.
Once inserted, that code lives in the shader forever, and we re-upload
it each time the function changes with a fixed-up compare. To avoid
re-uploading too often, if we switch back to a blendable format, the
test is (effectively) disabled and the hw alphatest functionality is
used.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/st: reduce size of state->st bitmask

In d035d50 this changed to 64b.. which I'm pretty sure was
unintentional.  Revert it back to 32b so the entire state struct
is a nice round 64b.

(Note sure that it would actually be measurable, but I did notice
that check_state() was hot in some benchmarks.)

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/u_queue: add optional cleanup callback

Adds a second optional cleanup callback, called after the fence is
signaled.  This is needed if, for example, the queue has the last
reference to the object that embeds the util_queue_fence.  In this
case we cannot drop the ref in the main callback, since that would
result in the fence being destroyed before it is signaled.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove the DRAW_PREAMBLE packet

According to firmware guys, the new sequence that we added for Polaris should
work on all CIK parts, and should actually be faster on some parts.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: handle numSamples=0 in _mesa_test_proxy_teximage()

Should fix the regressions reported in bug 96949.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96949
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Use dest.ssa.num_components rather than intrin->num_components.

I recently refactored this to share code between load and atomic
lowering.  loads used intrin->num_components, while atomics used
intrin->dest.ssa.num_components.  They should be equivalent, but
Jason wanted me to use the latter.  I missed applying his review.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Update outdated intrinsic const_index comments.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Use nir_intrinsic_set_base in atomic lowering.

This is more readable and also offers assertions that protect against
setting const_index fields on the wrong kind of intrinsic.

Suggested by Jason.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Split nir_lower_io's input/output/atomic handling into helpers.

The original function was becoming a bit hard to read, with the details
of creating and filling out load/store/atomic atomics all in one
function.

This patch makes helpers for creating each type of intrinsic, and also
combines them with the *_op() helpers, as they're closely coupled and
not too large.

v2: Minor style nits from Jason.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Drop bogus nir_var_shader_in case in nir_lower_io's store_op().

This can't happen, the caller asserts that mode is shader_out or shared.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Share destination rewriting and replacement code in IO lowering.

Both loads and atomics had identical code to rewrite destinations,
and all cases had the same two lines to replace instructions.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Share get_io_offset handling in nir_lower_io.

The load/store/atomic cases all duplicated the get_io_offset code, with
a few tiny differences: stores didn't bother checking for per-vertex
inputs, because they can't be stored to, and atomics didn't check at
all, since shared variables aren't per-vertex.

However, it's harmless to check, and allows us to share more code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Make a 'var' temporary in nir_lower_io.

Less typing and word wrapping issues than intrin->variables[0]->var.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Remove the emit_linterp() helper.

Rather than computing the barycentric mode each time we emit a LINTERP,
we can simply compute it once, as soon as we know we're doing non-flat
interpolation.

At that point, emit_linterp() doesn't do much, so fold it into the
call sites and drop it.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Reduce the number of fs_reg(brw_reg) calls in LINTERP handling.

A bit tidier.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Make a barycentric_mode() helper function.

This combines two copies of basically the same code.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Rename brw_wm_barycentric_interp_mode to brw_barycentric_mode.

brw_wm_barycentric_interp_mode is wordy, brw_barycentric_mode is less
typing and suffers from fewer line wrapping problems.

The enum values themselves don't really benefit from "WM" in the name,
either.  Put "BARYCENTRIC" first instead of at the end and drop "WM".

Generated by:

for file in *.c *.cpp *.h; do sed -i \
   -e 's/brw_wm_barycentric_interp_mode/brw_barycentric_mode/g' \
   -e 's/BRW_WM_\([A-Z_]*\)_BARYCENTRIC/BRW_BARYCENTRIC_\1/g' \
   -e 's/BRW_WM_BARYCENTRIC_INTERP_MODE_COUNT/BRW_BARYCENTRIC_MODE_COUNT/g' \
   $file;
done

with a few whitespace changes.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Handle default interpolation modes and locations in NIR.

This consolidates a bunch of hacks in a single place - by setting
the interpolation modes and locations on variables appropriately,
we can simply trust them in the rest of the code.  This avoids
having to handle INTERP_QUALIFIER_NONE, gl_Color overrides,
sample-shading overrides, and Gen4-5 centroid-overrides in a bunch
of places.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/context: Remove some unnecessary vfuncs

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Get rid of gen6_surface_state.c

The only useful thing left was gen6_init_vtable_surface_functions which we
can easily put in brw_wm_surface_state.c.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Use ISL for emitting buffer surface states

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Account for the element size in emit_buffer_surface_state

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen4-6: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen6: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen7: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen7: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen8: Use the generic ISL-based path for renderbuffer surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/gen8: Use the generic ISL-based path for texture surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Add generic surface update functions based on ISL

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/surface_state: Rename brw_update to gen4_update

We're about to add generic versions which work across gens and those should
have the brw name.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/state: Use ISL for emitting image surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use a generic ISL path for texture surfaces on gen8

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/state: Add a helper for emitting a surface state using isl

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for texture surfaces on gen6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for texture surfaces on gen7

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen7

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Use the generic ISL path for renderbuffer surfaces on gen8-9

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/blorp: Add a generic ISL-based surface state emit path

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting the aux isl_surf from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting the ISL clear color from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965/miptree: Add a helper for getting an isl_surf from a miptree

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

i965: Add an isl_device to the brw_context

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl/state: Add support for OffsetX/Y in surface state

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Add support for filling out surface states all the way back to gen4

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Add an ISL_DEV_IS_G4X macro

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Add macros and #includes for gens 4-6

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Make X/Y Offset field of SURFACE_STATE a uint

THe offset type has special implications that it's intended to be some form
of aligned memory address.  These assumptions allow it to handle the case
where there is some alignment requirement on the offset and the bottom bits
are used for other things.  However, the offsets in the surface state field
are really just unsigned integers.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

genxml: Add enough XML for gens 4, 4.5, and 5 to get SURFACE_STATE

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Chad Versace <chad.versace@intel.com>

isl/state: Divide the aux qpitch by 4

The field is in multiples of 4 like regular QPitch.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>

isl: Fix the bs assertion in isl_tiling_get_info

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chad.versace@intel.com>

anv: Handle VK_WHOLE_SIZE properly for buffer views

The old calculation, which used view->offset, encorporated buffer->offset
into the size calculation where it doesn't belong.  This meant that, if
buffer->offset > buffer->size, you would always get a negative size.  This
fixes 170 dEQP-VK.renderpass.attachment.* Vulkan CTS tests on Haswell.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

anv: Add an align_down_npot_u32 helper

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>