panfrost: Add RGB565, RGB5A1 texture formats

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

iris: Enable ARB_shader_draw_parameters support

Additional VERTEX_ELEMENT_STATE are used to store basevertex and
baseinstance and drawid updating the DWordLength of the
3DSTATE_VERTEX_ELEMENTS command.

This passes all piglit tests for spec.*draw_parameters.* tests
and VK-GL-CTS KHR-GL45.shader_draw_parameters_tests.* tests.

Now we only mark a dirty_update when parameters are changed or
when we have an indirect draw.

We enable PIPE_CAP_DRAW_PARAMETERS on Iris.

There is no edge flag support in the Vertex Elements setup.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

clover: Fix indentation issues

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Only use devices supporting IR_NATIVE

Currently clover will advertise any device that advertises
PIPE_CAP_COMPUTE, even if they do not support PIPE_SHADER_IR_NATIVE,
which is the IR used internally by clover.
This avoids clover advertising devices as available even though they
actually are not supported.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Move platform extensions definitions to clover/platform.cpp

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Aaron Watry <awatry@gmail.com>

clover: Move device extensions definitions to core/device.cpp

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Aaron Watry <awatry@gmail.com>

clover: Validate program and library linking options

Program linking options are only valid if the library was created with
the `-enable-link-options` option, which itself is only valid when
creating a library, and only when creating an executable.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Disallow creating libraries from other libraries

If creating a library, do not allow non-compiled object in it, as
executables are not allowed, and libraries would make it really hard to
enforce the "-enable-link-options" flag.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Aaron Watry <awatry@gmail.com>

clover/api: Fail if trying to build a non-executable binary

From the OpenCL 1.2 Specification, Section 5.6.2 (about clBuildProgram):

> If program is created with clCreateProgramWithBinary, then the
> program binary must be an executable binary (not a compiled binary or
> library).

Reviewed-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover/api: Rework the validation of devices for building

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Add an helper for checking if an IR is supported

Reviewed-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Remove the TGSI backend as unused

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Avoid warnings from new OpenCL headers

* Avoid warnings from references to deprecated CL 1.0, 1.2, 2.0 and 2.1 APIs.
* Avoid warnings from not defining CL_TARGET_OPENCL_VERSION.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: update ICD table to support everything up to 2.2

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>

include/CL: Update to the latest OpenCL 2.2 headers

Acked-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>

gallium/u_tests: use a compute-only context to test GCN compute ring

radeonsi: always use compute rings for clover on CI and newer (v2)

initialize all non-compute context functions to NULL.

v2: fix SI

radv: Interpolate less aggressively.

Seems like dxvk used integer builtins without setting the flat
interpolation decoration.

I believe in the current spec the app is required to set these,
but in the meantime to avoid breaking things in stable releases
(and so close to release for 19.0), only expand the interpolation
to float16 and struct (which cannot be builtins as our spirv parser
lowers the builtin block).

Fixes: f3247841040 "radv: Allow interpolation on non-float types."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

util: Don't block SIGSYS for new threads

SIGSYS is needed for programs using seccomp for sandboxing.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

freedreno/ir3: gsampler2DMSArray fixes

Array index should come before sample-id.  And exclude all isam variants
(which take integer texel coords) from adding of offset.

Fixes dEQP-GLES31.functional.texture.multisample.samples_1.use_texture_*_2d_array

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3/a6xx: fix atomic shader outputs

We also need to put in the output mov.  Possibly we could just fixup the
output register to read it directly from the dummy, but that is more
work and I guess dEQP is probably the only time you encounter this.

Fixes dEQP-GLES31.functional.shaders.opaque_type_indexing.atomic_counter.const_literal_fragment

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a6xx: vertex_id is not _zero_based

Fixes dEQP-GLES31.functional.draw_base_vertex.draw_elements_base_vertex.builtin_variable.vertex_id

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a6xx: fix DRAW_IDX_INDIRECT max_indicies

The indirect offset does not effect the index buffer size.  Fixes all of
dEQP-GLES31.functional.draw_indirect.compute_interop.large.drawelements_combined_grid_100x100_drawcount_*
with drawcount > 1.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3/a6xx: fix non-ssa atomic dst

We weren't propagating the array info for cases where result of atomic
is array/reg.  This can happen, for example, if result is part of a phi
web lowered to regs.

Fixes dEQP-GLES31.functional.ssbo.atomic.compswap.*

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a6xx: fix ssbo alignment

Fixes a bunch of deqp ssbo tests that use multiple ssbo blocks packed
into a single buffer.

Note the a5xx value seems suspicious, but this is what blob seems to
advertise.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/ir3: use nopN encoding when possible

Use the (nopN) encoding for slightly denser shaders.. this lets us fold
nop instructions into the previous alu instruction in certain cases.

Shouldn't change the # of cycles a shader takes to execute, but reduces
the size.  (ex: glmark2 refract goes from 168 to 116 instructions)

Currently only enabled for a6xx, but I think we could enable this for
a5xx and possibly a4xx.

Signed-off-by: Rob Clark <robdclark@gmail.com>

freedreno/a6xx: fix hangs with large shaders

We were overflowing instrlen (which is # of groups of 16 instructions)
in a couple dEQP tests, causing gpu hangs:

dEQP-GLES31.functional.ubo.random.all_per_block_buffers.13
dEQP-GLES31.functional.ubo.random.all_per_block_buffers.20

Signed-off-by: Rob Clark <robdclark@gmail.com>

mesa: fix display list corner case assertion

This fixes a failed assertion in glDeleteLists() for the following
case:

list = glGenLists(1);
glDeleteLists(list, 1);

when those are the first display list commands issued by the
application.

When we generate display lists, we plug in empty lists created with
the make_list() helper.  This function uses the OPCODE_END_OF_LIST
opcode but does not call dlist_alloc() which would set the
InstSize[OPCODE_END_OF_LIST] element to non-zero.

When the empty list was deleted, we failed the InstSize[opcode] > 0
assertion.

Typically, display lists are created with glNewList/glEndList so we
set InstSize[OPCODE_END_OF_LIST] = 1 in dlist_alloc().  That's why
this bug wasn't found before.

To fix this failure, simply initialize the InstSize[OPCODE_END_OF_LIST]
element in make_list().

The game oolite was hitting this.

Fixes: https://github.com/OoliteProject/oolite/issues/325
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

svga: fix dma.pending > 0 test

The dma.pending field is boolean, so testing for > 0 isn't right.

Reviewed-by: Neha Bhende <bhenden@vmware.com>

svga: assorted whitespace and formatting fixes

Remove trailing whitespace, etc.

Trivial.

st/mesa: whitespace/formatting fixes in st_cb_texture.c

Remove trailing whitespace, replace tabs w/ spaces, etc.

Trivial.

i965: fixed clamping in set_scissor_bits when the y is flipped

Calculating the scissor rectangle fields with the y flipped (0 on top)
can generate negative values that will cause assertion failure later on
as the scissor fields are all unsigned. We must clamp the bbox values
again to make sure they don't exceed the fb_height. Also fixed a
calculation error.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108999
          https://bugs.freedesktop.org/show_bug.cgi?id=109594

v2:
   - I initially clamped the values inside the if (Y is flipped) case
   and I made a mistake in the calculation: the clamp of the bbox[2] should
   be a check if (bbox[2] >= fbheight) bbox[2] = fbheight - 1 instead and I
   shouldn't have changed the ScissorRectangleYMax calculation. As the
   fixed code is equivalent with using CLAMP instead of MAX2 at the top of
   the function when bbox[2] and bbox[3] are calculated, and the 2nd is more
   clear, I replaced it. (Nanley Chery)

v3:
   - Reversed the CLAMP change in bbox[3] as the API guarantees that the
   viewport height is positive. (Nanley Chery)

v4:
  - Added nomination for the mesa-stable branch and the link to the second
  bugzilla bug (Nanley Chery)

CC: <mesa-stable@lists.freedesktop.org>
Tested-by: Paul Chelombitko <qamonstergl@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

freedreno/a6xx: Silence compiler warnings

util_format_compose_swizzles() expects 'const unsigned char' and we
are feeding it 'char'.

Reviewed-by: Rob Clark <robdclark@gmail.com>

i965: Add support for sampling from XYUV images

Add support to the i965 DRI driver to sample from XYUV8888 buffers.

Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

dri: Add XYUV8888 format

In addition to adding this format to the dri_interface header,
add an entry in the android and wayland backends as well.

Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

drm-uapi: Update headers from drm-next

Pull new updates from drm-next as of the following commit:

commit a5f2fafece141ef3509e686cea576366d55cabb6
Merge: 71f4e45a4ed3 860433ed2a55
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Feb 20 12:16:30 2019 +1000

    Merge https://gitlab.freedesktop.org/drm/msm into drm-next

Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

nir/lower_tex: Add support for XYUV lowering

The memory layout associated with this format would be:
Byte:      0 1 2 3
Component: V U Y X

Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

imgui: update memory editor

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>

imgui: update commit

In commit 3950e7c11efc86 ("imgui: bump copy") I forgot to update the
README about what copy of imgui we carry.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>

driinfo: add DTD to allow the xml to be validated

This DTD can be used to validate the output and make sure any parsers
out there can handle it:
$ xmllint --noout --valid driinfo.xml

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

vulkan/overlay: fix includes

The Loader/Validation-Layers repository allow the user to choose where
header files are installed. On my system I choose /usr/include
thinking it was the obvious "base" location, but it turns out the
headers end up being installed right there rather in a vulkan
subdirectory. On Debian/Ubuntu the selected installation path is
/usr/include/vulkan, so just go with that.

Hopefully other distro don't choose another path.

Note that the validation layer doesn't provide a .pc file so we have
no way of querying where the headers are installed.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109739
Acked-by: Eric Engestrom <eric.engestrom@intel.com>

vulkan/overlay: fix missing installation of layer

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109739
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

dri_interface: add missing #include

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

gitlab-ci: always run the containers build

If the first time a fork was created, the job creating the containers was
manually cancelled, this would have left the fork unable to use the CI
(until the next automatic regeneration of the container).

Avoid this by always running the container-generation job, even though
99% of the time it will spin up, see that the container exists and shut
down.

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

docs: mention "Allow commits from members who can merge..."

Mention the tick-box otherwise only the MR author can rebase the series.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reivewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>

egl/android: bump the number of drmDevices to 64

It's the current maximum supported by the kernel. Stay consistent with
the rest of Mesa and use the same number.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

loader: use loader_open_device() to handle O_CLOEXEC

Some platforms lack O_CLOEXEC. The loader_open_device() handles those
appropriately, so use the helper.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

meson: egl: correctly manage loader/xmlconfig

Earlier commit introduced support for haiku yet did not properly
annotate the loader/xmlconfig dependencies.

Thus we ended up adding inc_loader for each !haiku platform - see
659910eda01 9a96bf0ecd0 c731508b988 ec6cb01e216.

One piece remained though - the wayland platform. Hence the following
would fail:

 meson -Dgallium-drivers=etnaviv -Ddri-drivers=''\
       -Dtools=etnaviv -Dplatforms=wayland -Dglx=disabled \
       build/

Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Reported-by: Boris Brezillon <boris.brezillon@collabora.com>
Fixes: 834d221512f ("meson: Add Haiku platform support v4")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

egl/dri: de-duplicate dri2_load_driver*

The difference between the three functions is the list of mandatory
driver extensions. Pass that as an argument to the common helper.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

radv: don't copy buffer descriptors list for samplers

Sampler descriptors don't have a buffer list.

This fixes some crashes with new CTS
dEQP-VK.binding_model.descriptor_copy.*.sampler_*.

Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: fix out-of-bounds access when copying descriptors BO list

We shouldn't increment the buffer list pointers twice.

This fixes some crashes with new CTS
dEQP-VK.binding_model.descriptor_copy.*.

Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir: use nir_variable_create instead of open-coding the logic

Fixes: 3d7611e9 "st/nir: use NIR for asm programs"
Reported-by: Matthias Lorenz <oschowa@web.de>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: initialize value in copy_prop_vars_block

Fixes following valgrind warning:

   ==27561== Conditional jump or move depends on uninitialised value(s)
   ==27561==    at 0x667856B: value_set_ssa_components (nir_opt_copy_prop_vars.c:78)
   ==27561==    by 0x667A1C4: copy_prop_vars_block (nir_opt_copy_prop_vars.c:797)

Fixes: 62332d139c8 "nir: Add a local variable-based copy propagation pass"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

v3d: Rematerialize MOVs of uniforms instead of spilling them.

If we have a MOV of a uniform value available to spill, that's one of our
best choices.  We can just not spill the value, and emit a new load of the
uniform as the fill.  This saves bothering the TMU and the thrsw, and is
the same cost in uniforms (since the spill offset is a uniform anyway).

This doesn't have a huge impact on shader-db, since there aren't a whole
lot of spills and we usually copy-prop the uniforms at the VIR level such
that the only uniform MOVs are from vir_lower_uniforms:

total instructions in shared programs: 6430292 -> 6430279 (<.01%)
total uniforms in shared programs: 2386023 -> 2385787 (<.01%)
total spills in shared programs: 4961 -> 4960 (-0.02%)
total fills in shared programs: 6352 -> 6350 (-0.03%)

However, I'm interested in dropping the uniforms copy-prop in the backend,
since it would be cheaper to not load repeated uniforms if we have the
registers to spare.  This also saves many spills on
dEQP-GLES31.functional.ubo.random.all_per_block_buffers.20, which is what
motivated a bunch of my recent backend work in the first place:

before: 46 spills, 106 fills, 3062 instructions
after: 0 spills, 0 fills, 2611 instructions

v3d: Dump the VIR after register spilling if we were forced to.

Spilling is unusual, but one often has to debug it when it happens, so
dump it.

v3d: Fix vir_is_raw_mov() for input unpacks.

There are no users at the moment, but I wanted to start using this in
register spilling.

st/mesa: Reduce array updates due to current changes.

Since using bitmasks we can easily check if we have any
current value that is potentially uploaded on array setup.
So check for any potential vertex program input that is not
already a vao enabled array. Only flag array update if there is
a potential overlap.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>

meson/iris: Use current coding style

Just a few minor style things.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

radeonsi: fix query buffer allocation

Fix the logic for buffer full check on alloc.

This patch just takes the fix Nicolai attached to the bug report
and updates it to work on master.

Fixes: e0f0d3675d4 ("radeonsi: factor si_query_buffer logic out of si_query_hw")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109561

nir: Just return when asked to rewrite uses of an SSA def to itself.

The nir_builder swizzling improvement to not emit extra MOVs resulted in
nir_lower_tex() trying to rewrite an SSA def to itself, triggering the
assert on all texturing in v3d.  There's no work to be done in this case,
so just stop asserting.

Fixes: 743700be1f58 ("nir/builder: Don't emit no-op swizzles")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: fix clearing attachments in secondary command buffers

If no framebuffer is bound, get the number of samples and the
image format from the render pass.

This fixes new CTS dEQP-VK.geometry.layered.*.secondary_cmd_buffer.

Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

swr/rast: Fix autotools and scons codegen

Use new input flags for gen_archrast.py

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Add general SWTag statistics

Update Archrast parser to use stats, used with an internal tool

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Add string handling to AR event framework

For use by an internal tool

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Add initial SWTag proto definitions

Update gen_archrast.py to properly generate event IDs

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Cleanup and generalize gen_archrast

Update meson.build to accomodate

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

nir: Use SM5 properties to optimize shift(a@32, iand(31, b))

This is a common pattern from HLSL->SPIRV translation
and supported in HW by all current NIR backends.

vkpipeline-db results anv (SKL):

    total instructions in shared programs: 6403130 -> 6402380 (-0.01%)
    instructions in affected programs: 204084 -> 203334 (-0.37%)
    helped: 208
    HURT: 0

    total cycles in shared programs: 1915629582 -> 1918198408 (0.13%)
    cycles in affected programs: 1158892682 -> 1161461508 (0.22%)
    helped: 107
    HURT: 86

shader-db results on i965 (KBL):

    total instructions in shared programs: 15284592 -> 15284568 (<.01%)
    instructions in affected programs: 81683 -> 81659 (-0.03%)
    helped: 24
    HURT: 0

    total cycles in shared programs: 375013622 -> 375013932 (<.01%)
    cycles in affected programs: 40169618 -> 40169928 (<.01%)
    helped: 13
    HURT: 9

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir: Define shifts according to SM5 specification.

SPIR-V shifts are undefined for values >= bitsize, but SM5 shifts
are defined to only use the least significant bits.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/eu: Add an EOT parameter to send_indirect_[split]_message

For split indirect sends we have to put the EOT parameter in the
extended descriptor as well as the instruction itself so just calling
brw_inst_set_eot is insufficient.  Moving the EOT handling handling into
the send_indirect_[split]_message helper lets us handle it properly.

d3d: meson: do not prefix user provided d3d-drivers-path

The user can select the location where there d3d drivers
are installed by the d3d-drivers-path meson option.

By default path will be $prefix/$libdir/d3d.

Currently we add $prefix to the user provided path.
Resulting in an incorrect or even missing path.

Based on logic of
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109698
CC: Kenneth Graunke <kenneth@whitecape.org>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

dri: meson: do not prefix user provided dri-drivers-path

The user can select the location where there dri drivers
are installed by the dri-drivers-path meson option.

By default path will be $prefix/$libdir/dri.

Currently we add $prefix to the user provided path.
Resulting in an incorrect or even missing path.

v2: fixed dri_search_path by default, rebased to master

v3: new commit-message (Emil Velikov), cc mesa-stable

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109698
CC: Rafael Antognolli <rafael.antognolli@intel.com>
CC: Dylan Baker <dylan@pnwbakers.com>
Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Fixes: 306914db92e1 (meson: Add dridriverdir variable to dri.pc.)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

intel/aub_viewer: silence more compiler warnings

format not a string literal and no format arguments.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

intel/aub_viewer: silence compiler warning

buffer_addr may be used uninitialized.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

intel/aub_viewer: printout 48bits addresses

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

mesa/core: Enable EXT_depth_clamp for GLES >= 2.0

The extension NV_depth_clamp is written against OpenGL 1.2.1, and
since GLES 2.0 is based on GL 2.0 there is no reason not to enable
this extension also for GLES >= 2.0.

v2: Use EXT_depth_clamp that has been proposed to Khronos

v3: - Fix check for extension availability (Erik Faya-Lund)
    - Also fix the test in is_enabled
v4: - Test both, ARB and EXT extension (Erik)
v5: - Fix white space errors (Erik)

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>

iris: Properly allow rendering to RGBX formats.

I was converting them at pipe_surface creation time, but not when
answering queries about whether formats support rendering.  This caused
a lot of FBO incomplete errors for formats that ought to be supported.

Fixes "Child of Light", which uses PIPE_FORMAT_R8G8B8X8_UNORM_SRGB.

Also fixes Witcher 1 using wined3d (GL) according to Timur Kristóf.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109738

iris: Drop RGBX -> RGBA for storage image usages

GLSL doesn't expose RGB/RGBX image formats, so this isn't needed.

mesa: Fix RGBBuffers for renderbuffers with sized internal formats

For texture attachments, 'f' is texImg->_BaseFormat, but for
renderbuffer attachments, 'f' is att->Renderbuffer->InternalFormat.

InternalFormat may be something like GL_RGB8, which causes our
(f == GL_RGB) check to fail.  Switch to using a proper _BaseFormat,
which drops the size.

Fixes dEQP-GLES31.functional.draw_buffers_indexed.random.
max_required_draw_buffers.15 on iris when combined with a driver fix.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>

glsl: Fix function return typechecking

apply_implicit_conversion only converts and check base types but we
need actual type equality for function returns, otherwise you can
return a vec2 from a function declared as returning a float.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

iris: Always use in-tree i915_drm.h

Ref: f1374805a86 "drm-uapi: use local files, not system libdrm"
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

panfrost: Decode render target swizzle/channels

On MRT-capable systems, the framebuffer format is encoded as a 64-bit
word in the render target descriptor. Previously, the two 32-bit
words were exposed as opaque hex values. This commit identifies a 12-bit
Mali swizzle and a 2-bit channel counter, removing some of the magic. It
also adds decoding support for the AFBC and MSAA enable bits, which were
already known but otherwise ignored in pandecode.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/midgard: Add fround(_even), ftrunc, ffma

These ops were discovered by invoking the correspondingly names GLSL
functions. The rounding ops here behave exact as expected and are mapped
to their corresponding NIR ops where applicable. The ffma behaves as a
LUT instruction and requires some special argument packing (since
Midgard normally only allows for 2 arguments); this quirk will be
addressed in the future, but for now FMA is still lowered.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/nondrm: Split out dump_counters

Previously, this function was implied a part of the job submit.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/nondrm: Make COHERENT_LOCAL explicit

This flag corresponds to what was MEM_COHERENT_LOCAL in the vendor
driver, which seems to influence the cache policy, necessary for the
varying temporary storage but nothing else.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/nondrm: Flag CPU-invisible regions

Potentially, the kernel could optimize these allocations, or perhaps we
can save on mapping costs.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost/meson: Remove subdir for nondrm

This change fixes cross builds with the (temporary) non-DRM overlay.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Use tiler fast path (performance boost)

For reasons that are still unclear (speculation included in the comment
added in this patch), the tiler? metadata has a fast path that we were
not enabling; there looks to be a possible time/memory tradeoff, but the
details remain unclear.

Regardless, this patch improves performance dramatically. Particular
wins are for geometry-heavy scenes. For instance, glmark2-es2's
Phong-shaded bunny, rendering at fullscreen (2400x1600) via GBM, jumped
from ~20fps to hitting vsync cap at 60fps. Gains are even more obvious
when vsync is disabled, as in glmark2-es2-wayland.

With this patch, on GLES 2.0 samples not involving FBOs, it appears
performance is converging with (and sometimes surpassing) the blob.

Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

nir/builder: Don't emit no-op swizzles

The nir_swizzle helper is used some on it's own but it's also called by
nir_channel and nir_channels which are used everywhere.  It's pretty
quick to check while we're walking the swizzle anyway whether or not
it's an identity swizzle.  If it is, we now don't bother emitting the
instruction.  Sure, copy-prop will clean it up for us but there's no
sense making more work for the optimizer than we have to.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

nir/split_vars: Don't compact vectors unnecessarily

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

st/mesa: remove unused header-file

This header has been unused since f8f2520e88c ("st/mesa: Remove
unnecessary headers"). And in the more than 8 years since, this
hasn't been useful. So let's just get rid of it.

Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

configure: fix test portability

From the bash manual:

string1 == string2
string1 = string2
       True if the strings are equal.  = should be used with the test
       command for POSIX conformance.

meson: ensure that xmlpool_options.h is generated for gallium targets that need it

Fixes: 68076b87474e7959c161 "meson: build gallium vdpau state tracker"
Fixes: 22a817af8a89eb3c762f "meson: build gallium xvmc state tracker"
Fixes: 5a785d51a6d68ec676ce "meson: build gallium va state tracker"
Fixes: 0ba909f0f111824223bc "meson: build gallium xa state tracker"
Fixes: 1d36dc674d528b93bec3 "meson: build gallium omx state tracker"
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>

vulkan/overlay: Add fps counter

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109747

Revert "anv: add support for INTEL_DEBUG=bat"

This reverts commit e4d88396d259c4ec6032d2834d1c9073d55e9b45.

Apologies, I pushed the wrong commit.

anv: add support for INTEL_DEBUG=bat

As requested by Ken ;)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

etnaviv: blt: mark used src resource as read from

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

etnaviv: rs: mark used src resource as read from

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

gallium/auxiliary/vl: Fix duplicate symbol build errors.

  CXXLD    gallium_dri.la
duplicate symbol _compute_shader_video_buffer in:
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor.o)
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor_cs.o)
duplicate symbol _compute_shader_weave in:
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor.o)
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor_cs.o)
duplicate symbol _compute_shader_rgba in:
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor.o)
    ../../../../src/gallium/auxiliary/.libs/libgalliumvl.a(libgalliumvl_la-vl_compositor_cs.o)

Fixes: 9364d66cb7f7 ("gallium/auxiliary/vl: Add video compositor compute shader render")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>

nir: fix MSVC build

Zero initialize struct with {0} instead of {}.

nir/copy_prop_vars: add tests for load/store elements of vectors

Test using array deref on vectors in loads and stores.  These are
marked DISABLED_ as this optimization is currently not done.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>