soclayout.git
2020-11-11 Luke Kenneth... submodule update
2020-11-11 Luke Kenneth... adjust chip/core size to try to fit ls180 core/pads
2020-11-11 Luke Kenneth... add power/ground pads
2020-11-11 Luke Kenneth... update CLKSEL / PLLOCK pins for ls180
2020-11-09 Luke Kenneth... add code comments for ioring-to-niolib conversion of...
2020-11-08 Luke Kenneth... start conversion of ls180 to new niolib
2020-11-07 Luke Kenneth... add io_in/io_out zero/one to help transition to new...
2020-11-07 Luke Kenneth... messing about to get non_generated ls180.vst running...
2020-11-07 Luke Kenneth... update full ls180 core
2020-11-05 Luke Kenneth... update to "full" core
2020-11-05 Luke Kenneth... add build scripts for ls180
2020-11-04 Luke Kenneth... minor reformat of spec, whitespace
2020-11-02 Luke Kenneth... add cmos45 to mksyms.sh
2020-11-02 Jean-Paul ChaputCompleted experiment10, adder with JTAG (dual clocks...
2020-10-25 Jean-Paul ChaputAdded one-clock generated add.vst.
2020-10-25 Jean-Paul ChaputExperiment10 switched to the new chip2core module.
2020-10-25 Luke Kenneth... update non_generated add.il for convenience
2020-10-24 Luke Kenneth... add feedback shift register back in
2020-10-22 Luke Kenneth... add non-generated add.il
2020-10-22 Luke Kenneth... add jtag IO to experiment10
2020-10-22 Luke Kenneth... add JTAG test
2020-10-22 Luke Kenneth... add experiments10, to add C4M JTAG
2020-10-04 Luke Kenneth... match up power/gnd numbers with pinmux
2020-10-04 Luke Kenneth... submodule update
2020-10-04 Luke Kenneth... use new extpower/intpower and pads.useCoreSize params
2020-10-04 Luke Kenneth... reduce number of not-connected
2020-10-04 Luke Kenneth... update experiment4 to use pads.useCoreSize
2020-10-02 Luke Kenneth... submodule update
2020-10-02 Luke Kenneth... update build.sh
2020-10-02 Luke Kenneth... add really cut down version of ls180.vst
2020-10-02 Luke Kenneth... really really cut down core
2020-10-02 Luke Kenneth... submodule update
2020-10-02 Luke Kenneth... move ioring to pinmux
2020-10-01 Luke Kenneth... update to new ls180.il (no core yet) with PLL I/O and I2C
2020-10-01 Luke Kenneth... sort sys_* pad names
2020-10-01 Luke Kenneth... add I2C, allow sys_clk_i and sys_pll_48_o out
2020-09-30 Luke Kenneth... increase core.size to 27500x27500
2020-09-30 Luke Kenneth... add full core ilang file
2020-09-30 Luke Kenneth... commented-out core.size and chip.size which would allow the
2020-09-30 Luke Kenneth... use publicly-accessible submodule
2020-09-30 Luke Kenneth... add build script for convenience
2020-09-30 Jean-Paul ChaputURL of submodule pinmux needs to use ssh/port 922.
2020-09-29 Luke Kenneth... add cki and ck to clock settings
2020-09-29 Luke Kenneth... updated ls180 (no core, testing)
2020-09-28 Luke Kenneth... add sdram_dm_1 back in
2020-09-28 Luke Kenneth... iopad pads.instances mapping
2020-09-28 Luke Kenneth... worked out how to do pad instances in experiment4
2020-09-28 Luke Kenneth... submodule update
2020-09-28 Luke Kenneth... remove unused cells for now
2020-09-28 Luke Kenneth... cut out core for now to focus on ioring
2020-09-28 Luke Kenneth... cut definition of clocks back to minimum
2020-09-28 Luke Kenneth... connect up dummy "NC" pins
2020-09-27 Luke Kenneth... Makefile add chip building
2020-09-27 Luke Kenneth... add soc ioring
2020-09-27 Luke Kenneth... add link to pinmux generation for use in ioring.py
2020-09-27 Luke Kenneth... add submodule pinmux
2020-09-19 Luke Kenneth... update ls180.il which successfully (except for 18 track...
2020-09-19 Luke Kenneth... redo litex gateware
2020-09-19 Luke Kenneth... first attempt putting in litex pins instead of bare...
2020-09-15 Jean-Paul ChaputUse Yosys flattening for top blocks.
2020-09-14 Jean-Paul ChaputConfiguration updated for test of HFNS.
2020-09-08 Luke Kenneth... new version of test_issuer.il
2020-08-24 Luke Kenneth... nuts. remove div pipe, use FSM
2020-08-24 Luke Kenneth... update to latest test_issuer.il
2020-08-13 Luke Kenneth... whitespace cleanup
2020-08-13 Luke Kenneth... update to binary-addressed int regfile
2020-08-13 Luke Kenneth... whoops must use "with" on CfgCache
2020-08-12 Jean-Paul ChaputAdded doDesignFlat.py to P&R issuer in a flat way.
2020-08-11 Jean-Paul ChaputCorrect taking in accounts of the parameters settings.
2020-08-11 Luke Kenneth... test_issuer.il with an alternative read/write port...
2020-08-11 Luke Kenneth... fix coriolis2 settings to use new CfgCache
2020-08-11 Luke Kenneth... use new "state" regfile
2020-08-07 Jean-Paul ChaputMerge branch 'master' of ssh://libre-riscv.org:922...
2020-08-07 Jean-Paul ChaputUse of CfgCache. Little beautificaton of doDesign.py
2020-08-05 Luke Kenneth... find semi-suitable width for spr0, add missing int...
2020-08-05 Luke Kenneth... workaround for spr bug
2020-08-05 Luke Kenneth... rename clk/rst to coresync_clk/rst, resize height of...
2020-08-05 Luke Kenneth... comment out pdecode2 block for now
2020-08-05 Luke Kenneth... add coriolis_setup, fix subckt numbering
2020-08-05 Luke Kenneth... add __main__ runner
2020-08-05 Luke Kenneth... indentation and add div0 to blockIssuer
2020-08-05 Luke Kenneth... substitute/indent to reduce to 80 char limit
2020-08-05 Luke Kenneth... add div and mul to test_issuer
2020-08-03 Jean-Paul ChaputFisrt attempt at floorplaning test_issuer.
2020-07-30 Luke Kenneth... remove move unneeded signals from test_issuer.il
2020-07-30 Luke Kenneth... stack of signals that should not have been connected...
2020-07-29 Luke Kenneth... updated test_issuer.il to include new names
2020-07-21 Luke Kenneth... new test_issuer.il, reducing fast regfile ports
2020-07-05 Luke Kenneth... add SPR pipeline (but not DIV for now)
2020-07-02 Luke Kenneth... ignore .ap and .vst files
2020-07-02 Luke Kenneth... name ALUs so as to not have to change cells.lst
2020-07-02 Luke Kenneth... Revert "add div pipeline"
2020-07-02 Luke Kenneth... add div pipeline
2020-07-02 Luke Kenneth... update cells list (manual... hmm....)
2020-07-02 Luke Kenneth... update to new test_issuer.il, includes trap pipeline...
2020-06-30 Luke Kenneth... netlist in cells.lst not nets2.txt
2020-06-30 Luke Kenneth... add mksym.sh
2020-06-30 Jean-Paul ChaputAdded experments9, a first taste at the full scale...
2020-06-06 Luke Kenneth... add mksyms.sh
2020-06-06 Luke Kenneth... Revert "add mksyms.sh"
next