comb += regfile.ren.eq(1<<regnum)
# ... but on a 1-clock delay
with m.If(res_ok_delay):
- comb += res.eq(regfile.data_o)
+ comb += res.eq(regfile.o_data)
return res
def get_predint(m, mask, name):
# one cycle later, msr/sv read arrives. valid only once.
with m.If(~msr_read):
sync += msr_read.eq(1) # yeah don't read it again
- sync += cur_state.msr.eq(self.state_r_msr.data_o)
+ sync += cur_state.msr.eq(self.state_r_msr.o_data)
with m.If(self.imem.f_busy_o): # zzz...
# busy: stay in wait-read
comb += self.imem.a_i_valid.eq(1)
with m.If(dunary):
# set selected mask bit for 1<<r3 mode
dst_shift = Signal(range(64))
- comb += dst_shift.eq(self.int_pred.data_o & 0b111111)
+ comb += dst_shift.eq(self.int_pred.o_data & 0b111111)
sync += new_dstmask.eq(1 << dst_shift)
with m.Else():
# invert mask if requested
- sync += new_dstmask.eq(self.int_pred.data_o ^ inv)
+ sync += new_dstmask.eq(self.int_pred.o_data ^ inv)
# skip fetching source mask register, when zero
with m.If(sall1s):
sync += new_srcmask.eq(-1)
with m.If(sunary):
# set selected mask bit for 1<<r3 mode
src_shift = Signal(range(64))
- comb += src_shift.eq(self.int_pred.data_o & 0b111111)
+ comb += src_shift.eq(self.int_pred.o_data & 0b111111)
sync += new_srcmask.eq(1 << src_shift)
with m.Else():
# invert mask if requested
- sync += new_srcmask.eq(self.int_pred.data_o ^ inv)
+ sync += new_srcmask.eq(self.int_pred.o_data ^ inv)
m.next = "FETCH_PRED_SHIFT_MASK"
# fetch masks from the CR register file
cr_field = Signal(4)
scr_bit = Signal()
dcr_bit = Signal()
- comb += cr_field.eq(cr_pred.data_o)
+ comb += cr_field.eq(cr_pred.o_data)
comb += scr_bit.eq(cr_field.bit_select(sidx, 1) ^ scrinvert)
comb += dcr_bit.eq(cr_field.bit_select(didx, 1) ^ dcrinvert)
# set the corresponding mask bit
# while stopped, allow updating the PC and SVSTATE
with m.If(self.pc_i.ok):
comb += self.state_w_pc.wen.eq(1 << StateRegs.PC)
- comb += self.state_w_pc.data_i.eq(self.pc_i.data)
+ comb += self.state_w_pc.i_data.eq(self.pc_i.data)
sync += pc_changed.eq(1)
with m.If(self.svstate_i.ok):
comb += new_svstate.eq(self.svstate_i.data)
# since we are in a VL==0 loop, no instruction was
# executed that we could be overwriting
comb += self.state_w_pc.wen.eq(1 << StateRegs.PC)
- comb += self.state_w_pc.data_i.eq(nia)
+ comb += self.state_w_pc.i_data.eq(nia)
comb += self.insn_done.eq(1)
m.next = "ISSUE_START"
with m.Else():
(skip_dststep >= cur_vl)):
# end of VL loop. Update PC and reset src/dst step
comb += self.state_w_pc.wen.eq(1 << StateRegs.PC)
- comb += self.state_w_pc.data_i.eq(nia)
+ comb += self.state_w_pc.i_data.eq(nia)
comb += new_svstate.srcstep.eq(0)
comb += new_svstate.dststep.eq(0)
comb += update_svstate.eq(1)
# TODO: this just blithely overwrites whatever
# pipeline updated the PC
comb += self.state_w_pc.wen.eq(1 << StateRegs.PC)
- comb += self.state_w_pc.data_i.eq(nia)
+ comb += self.state_w_pc.i_data.eq(nia)
# reset SRCSTEP before returning to Fetch
if self.svp64_en:
with m.If(pdecode2.loop_continue):
# while stopped, allow updating the PC and SVSTATE
with m.If(self.pc_i.ok):
comb += self.state_w_pc.wen.eq(1 << StateRegs.PC)
- comb += self.state_w_pc.data_i.eq(self.pc_i.data)
+ comb += self.state_w_pc.i_data.eq(self.pc_i.data)
sync += pc_changed.eq(1)
with m.If(self.svstate_i.ok):
comb += new_svstate.eq(self.svstate_i.data)
# check if svstate needs updating: if so, write it to State Regfile
with m.If(update_svstate):
comb += self.state_w_sv.wen.eq(1<<StateRegs.SVSTATE)
- comb += self.state_w_sv.data_i.eq(new_svstate)
+ comb += self.state_w_sv.i_data.eq(new_svstate)
sync += cur_state.svstate.eq(new_svstate) # for next clock
def execute_fsm(self, m, core, pc_changed, sv_changed,
# don't write pc every cycle
comb += self.state_w_pc.wen.eq(0)
- comb += self.state_w_pc.data_i.eq(0)
+ comb += self.state_w_pc.i_data.eq(0)
# don't read msr every cycle
comb += self.state_r_msr.ren.eq(0)
sync += d_reg_delay.eq(d_reg.req)
with m.If(d_reg_delay):
# data arrives one clock later
- comb += d_reg.data.eq(self.int_r.data_o)
+ comb += d_reg.data.eq(self.int_r.o_data)
comb += d_reg.ack.eq(1)
# sigh same thing for CR debug
sync += d_cr_delay.eq(d_cr.req)
with m.If(d_cr_delay):
# data arrives one clock later
- comb += d_cr.data.eq(self.cr_r.data_o)
+ comb += d_cr.data.eq(self.cr_r.o_data)
comb += d_cr.ack.eq(1)
# aaand XER...
sync += d_xer_delay.eq(d_xer.req)
with m.If(d_xer_delay):
# data arrives one clock later
- comb += d_xer.data.eq(self.xer_r.data_o)
+ comb += d_xer.data.eq(self.xer_r.o_data)
comb += d_xer.ack.eq(1)
def tb_dec_fsm(self, m, spr_dec):
with m.State("DEC_WRITE"):
new_dec = Signal(64)
# TODO: MSR.LPCR 32-bit decrement mode
- comb += new_dec.eq(fast_r_dectb.data_o - 1)
+ comb += new_dec.eq(fast_r_dectb.o_data - 1)
comb += fast_w_dectb.addr.eq(FastRegs.DEC)
comb += fast_w_dectb.wen.eq(1)
- comb += fast_w_dectb.data_i.eq(new_dec)
+ comb += fast_w_dectb.i_data.eq(new_dec)
sync += spr_dec.eq(new_dec) # copy into cur_state for decoder
m.next = "TB_READ"
# waits for read TB to arrive, initiates write of current TB
with m.State("TB_WRITE"):
new_tb = Signal(64)
- comb += new_tb.eq(fast_r_dectb.data_o + 1)
+ comb += new_tb.eq(fast_r_dectb.o_data + 1)
comb += fast_w_dectb.addr.eq(FastRegs.TB)
comb += fast_w_dectb.wen.eq(1)
- comb += fast_w_dectb.data_i.eq(new_tb)
+ comb += fast_w_dectb.i_data.eq(new_tb)
m.next = "DEC_READ"
return m
projects / soc.git / blobdiff